How to add an SAP distribution list to transport?

Hi All,
I have created a shared distribution list in SAP using SO15. Can anyone suggest me how to add this list to a transport? or I need to create this in each environment.
Please suggest on this issue.
Thanks in advance
Prady

What does that mean? So I have to create it in each environment(i.e. Development/Quality/Production) explicitly. By no means I can transport this list then?
Thanks for your quick response.
With regards
Prady

Similar Messages

Add member in Distribution List from Sql file or Sql Server

Hi
I want to add member in Distribution List in MS Exchange 2010 using MS Sql Database file
How to create connectivity between MS SQL file and MS Exchange 2010 ?
and manage DL also add and remove member from DL?

The answer to your question depends on the version of SQL Server and Exchange you are running. If you have Exchange 2007 or higher, and if you have SQL Server 2010 or higher, you can load support for both in a PowerShell session. Otherwise, you
will need to write an application to join the two. It may be simplest to schedule a flat-file dump from your SQL Server database, and use that to pull DL membership into Exchange - I know several third party corporations that have done this for their
Exchange 2003 (and earlier) management add-ons.
And before you ask, it would take too much time for me to explain how you would need to connect to and interact with the SQL Server database using PowerShell (or how to dump a flat-file from it, for that matter) for me to do it here. I suggest you
search the web for SQL Server PowerShell or SQL Server export
for that information.
Once you have the information from SQL Server, it's a simple task to run Add-DistributionGroupMember to add members and Remove-DistributionGroupMember for DL membership management. I'll caution you, though - if you are going to do massive updates to
a large distribution group, it would probably be faster to use DL management in AD. The reason for this is that you can add or remove several group members at once using the AD toolset, but you can only work with individual members with the above Exchange
commands. And working with individual members means enumerating the entire group membership for each update - and with large groups, this takes a lot of time.

How do I email a distribution list in Entourage?

I would like to share some of my distribution lists with friends.
How can I email the distribution list? I can't drag a group icon into the mail message like in Outlook.
Any help is appreciated.
Jeremy

Thanks. I was hoping to find something other than Groups, because when you sync with a mobile device, it maps the groups to Categories in the device. This adds a lot of complexity to data and many mobile devices have some limitations on categories.
But thanks for the quick response!
-MJSTEELEGA

How to add a video play list on palm pre

Does anybody knows how to add a video play list in palm pre?
I did try to add video in different folders but in the palm device are loaded in the same playlist. Is there a way to organize video files?
tks
Post relates to: Pre p100ueu (O2)

QuickTime requires player and plugins that most people don't have. You'll reach a much wider audience if you use HTML5 <video> with mp4, webm and ogg files.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>


</head>
<style>
video {
    max-width:100%;
    display:block;
    margin:0 auto;
</style>
<body>
<h2>Use 3 File Types to support all browsers & mobile devices: MP4, WEBM and OGV.</h2>
<h3>Online Video Converter
http://video.online-convert.com/</h3>

<video controls poster="Your_poster_image.jpg">

<source src="http://techslides.com/demos/sample-videos/small.webm" type="video/webm">
<source src="http://techslides.com/demos/sample-videos/small.ogv" type="video/ogg">
<source src="http://techslides.com/demos/sample-videos/small.mp4" type="video/mp4">
If you're seeing this, you're using an
outdated browser that doesn't support
the video tag. </video>

</body>
</html>
Nancy O.

How to add Gap between dropdown List Items - ComboBox in MFC VC++

How to add Gap between dropdown List Items - ComboBox in MFC VC++

Did you tried SetItemHeight() inside your App .
Thanks
Rupesh Shukla

How can I create email distribution lists in my contacts on my macbook air?

How can I create email distribution lists in my contacts on my macbook air? I could do this on a pc using outlook, but I don't see how to do it on my new mac.

UPDATE, ok, I figured out how to make a list, but how can I remove specific contacts from the list? The "Remove from Group" is greyed out & not available.

How to send mail to distribution list and another table list

Hi
I am facing a problem. I need to send mail to the user who is creating the SO/PO and a distribution list.
Problem is only one thing can be used at the same time. ie either Distribution list or list from internal table.
How can we use both in 1 function module. Like it should call the internal table and then the distribution list for sending the mail .
Regards,
Varun

Hi,
Refer to following link,
http://www.sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
http://www.sap-img.com/fu016.htm
Reward pts. if helpfull.
Regards,
Dhan

How to get administrations of distribution list using api?

I want get all administrations of a distribution list using api, how to do that?
anybody knows? Thank you very much!!

there is a standard function in mdm wd component
https://help.sap.com/saphelp_nwmdm71/helpdata/en/loio30bf76947bb64c48a2e835fda42c5183_30bf76947bb64c48a2e835fda42c5183/4…
"Note The Compare to Original button on the Items Detail component opens a Compare component enabling a user to compare a checked out record with an original record (if the user has authorization for the checked out group).
If the checked out record is a result of a merge action, then the Compare view displays all the original records prior to the merge. When a merge action is executed on a number of checked out records, the merged record is also checked out."

How do I create a Distribution List in the Mail App?

I am a recent convert from MS Outlook on Windows. I am loving Apple's Mail, Address Book and iCal. But I am still learning how to do all the things I do everyday without even thinking.
I just want to create a Distribution list for each team of people I work with. There has got to be something I am overlooking...???
iMac 2.16Ghz Core2Duo 20" Mac OS X (10.4.9) MacBook 2Ghz Core2Duo

Thanks. I was hoping to find something other than Groups, because when you sync with a mobile device, it maps the groups to Categories in the device. This adds a lot of complexity to data and many mobile devices have some limitations on categories.
But thanks for the quick response!
-MJSTEELEGA

How Do I Manage "Group"/"Distribution List" Members?

I downloaded iCloud recently to my android smart phone. I use Outlook 2007 as my mail program. When I"m on my pc (MS 8.1) & check my contacts, I find my "distribution lists"/'Groups" in a new list on the left side, but I cannot open these "lists/groups" therefore, I cannot manage membership on them. The "groups" won't open to show me who the members are.
How do I solve this question?

In Contacts, you can create Groups, of course. First and best, make the Groups visible (Command-1, or click View in the menu bar, then Groups).
You add contacts to Groups per simple drag and drop. You delete contacts from Groups by pressing backspace, or delete (if you have the extended keyboard), or -> Edit -> Remove From Group.

How to add item to a List with a bounded wildcard

Hi,
Is there a way to add a subtype instance to a List with a bounded wildcard? For example, say I have an
abstract class called Car. Then I have 2 concrete subclasses--Ford and Toyota. Now say I have another
class that contains a prepopulated list and is wildcard bounded like this: List<? extends Car> carList. I
want to add a method where I pass in a Car subtype as a parameter and then add it into this list, e.g:
public void addCar(Car car) {
carList.add(car);
Trying this, I keep getting "cannot find symbol" compilation errors. When I went back to read the Generics
tutorial by Bracha, he mentions that explicitly adding a subtype, e.g. carList.add(new Ford()), can not be
done. But here I'm adding the "upper bound" of the wildcard, i.e. the Car type. Therefore there should be no
discrepancy between supertype and subtype an thus the carList.add(car) should be ok, IMO.
Am I misunderstanding something with this logic? Also, if carList.add(car) can not be done, then how can
I go about doing something similar which will allow me to add subtypes to a "generic" list?
Thanks in advanced!
-los

I get a compilation error expecting an Object instead of a Car. Of course you did. List<? super Car> is a list into which you can put cars -- and possibly other stuff. List<? extends Car> is a list out of which you can get cars (possibly of different makes).
Do you need a list that you can put cars in and get cars out? That's List<Car>
This isn't a linguistic problem you are having; this is a design problem. If you have a function that takes an argument which is a list that you can put any kind of car into and be sure of getting a car out of, it isn't reasonable to pass in a List<Ford> (because the function might put in a Chevy) or a List<Object> (but there might be motorcycles already in there). By the requirements you have, you need a List<Car> and nothing else.
Yes, you could use a cast, but all you are doing is circumventing the type system by saying "I know this List<Object> only has Cars in it."

How to send mail to distribution list ?

Hi Everybody,
Pls let me know how to send mail to distributed list???
Thanks & Regards,
raju<b></b>

Hi ,
Use Function Module 'SO_NEW_DOCUMENT_SEND_API1'.
U need to pass Distribution list to Receiver and 'C' to receiver type refer the below code for clarification.
Determine the Distribution List.
        gv_rec_list-receiver = gv_distribution.
        gv_rec_list-rec_type = 'C'.
        APPEND gv_rec_list.
Check if Distribution List is deleted.
        SELECT SINGLE objnam
                 FROM soid
                 INTO lc_objnam
                 WHERE objnam = gv_rec_list AND
                       dlitp = lc_dli.
        IF sy-subrc = 0.
          CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
            EXPORTING
              document_data              = gv_doc_data
              document_type              = 'RAW'
              put_in_outbox              = 'X'
            TABLES
              object_content             = gv_obj_cont
              receivers                  = gv_rec_list
            EXCEPTIONS
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4.
          CASE sy-subrc.
            WHEN '1'.
             message i001(as) with 'TOO MANY RECEIVERS'.
              EXIT.
            WHEN '2'.
             message i001(as) with 'DOCUMENT NOT SENT'.
              EXIT.
            WHEN '3'.
             message i001(as) with 'DOCUMENT TYPE DOES NOT EXIST'.
              EXIT.
            WHEN '4'.
             message i001(as) with 'OPERATION NO AUTHORIZATION'.
              EXIT.
          ENDCASE.
          Hope this might have helped you.
Thanks,
Prashanth

How to create an anonymous Distribution List ?

Hi,
I have a growing distribution address list created in the Address Book. When I send that address list from Mail, all the names appear individually and everybody can see everybody's else email.
How to make it look like it comes just from me, or my distribution list name, and not make appear all the other emails?
Thanks,
JP.

Hi,
Simple enough and seems to work
Thanks!
JP.

How to set up text distribution list

I found out how to set up an email distribution list without buying an app but now I need to know how to do the same with sending texts, without buying an app and by associating a contact to it. I don't want to send a group text and only access that group by pulling up the text screen. All I want to do is assign a few numbers to a group name and use that group name to send a next message to the recipients. Any ideas?

Since a phone number field in Contacts does not have the ability to delineate between numbers, probably not. Theoretically, I suppose it could work if applied for recipients getting iMessages AND using email as the receive address, but hard to say. But for SMS texting, no.

How to create Exchange dynamic distribution list using multivalue extension custom attribute

I am trying to create a dynamic distribution list using an ExtensionCustomAttribute. I am in hybrid mode with Exchange 2013. The syntax I have is this:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {(ExtensionCustomAttribute2 -eq 'NH')}
This works correctly on-prem. But hosted always results in an empty list. I can see in dirsync the attribute is in the hosted environment, but for whatever reason, the distribution group gets created but always come up null.
If I create a group looking at the single valued attributes, such as CustomAttribute6 -eq 'Y', it works correctly on-prem and hosted.
If anyone has any suggestions I would appreciate it.

I don't think I provided enough information about the problem. Let me add some and see if it makes sense.
I have an Exchange 2013 on-premise configured in hybrid mode with Office365. For testing purposes, I have 2 users, Joe and Steve, one with the mailbox on-prem, and the other with the mailbox in the cloud. Each of them has CustomAttribute6 = 'Y'
and ExtensionCustomAttribute2 = 'NH'. Dirsync shows these users and these attributes are synced between on-prem and cloud.
Using on-prem Exchange powershell, I run the following command:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')}
This correctly finds the 2 users when I query for them as follows:
$DDG = Get-DynamicDistributionGroup DG_NH
Get-Recipient -RecipientPreviewFilter $DDG.RecipientFilter | FT alias
So I then delete this DG, and recreate it this time looking at the multi-value attribute ExtensionCustomAttribute2, as follows:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')}
Replaying the query above, I can see this also works fine and finds my two users.
Next I open a new powershell and connect to Office 365 and repeat the process there.
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')}
This correctly finds the 2 users when I query for them.
And then delete the group and recreate it using the multi-value attribute:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')}
When I run the query this time it produces no result. Every test I try results in an empty group if I am using a multi-valued attribute in the search criteria in the cloud. If I use single valued attribute, it works fine.
I really need to be able to get multi-valued DDG's working in the cloud. If anyone has done this and has any suggestions, I would appreciate seeing what you did. And if this is the wrong forum to port this, if you can point me to a more suitable
forum I will report there.
Thanks,
Richard

How to add an SAP distribution list to transport?

Similar Messages

Maybe you are looking for