How to add another new report painter in existing T-code?

HI,
Can someone guide me, how to add a report painter report ZAL into a existing T-code?
My T-code contain 2 report, now i wish to add a new one. So when user execute this T-code, we can see these 3 report.
Thanks

Hi,
add the new report to the report group (T-code GR52) where the 2 already existing reports belong to.
In report painter you don't execute a report but always a report group including one or more reports.
Best regards, Christian

Similar Messages

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add the new dep area in existing cod

Dear all,
how to add the new dep area in existing cod we are planing to implement the IFRS by using leading ledger and non leading ledger present we are using OL leading ledger
present we are using dep area 01 ,15
how to achive the parallel accounting in asset accounting how to add new dep area 30 in existing COD
if any document plz refer me

Hi Bhayyapu,
Please refer to the links given below.
New Depreciation area
Adding a New Depreciation Area to Existing Assets - Financial Accounting (FI) - SAP Library
Hope this will help you.
Regards
Eugene

How to add a new field to an existing Generic Search result list?

Good day,
I'm new to the concepts of the Generic Search Framework. I'm attempting to add a new field to an existing result list, and have that new field restricted to a value of "C". This new field will not be displayed, it is only used to ensure that Invoice Documents with a DocStatus of "C" are returned to the B2B Application.
From the *modification\generic-searchbackend-config.xml file, the existing
<h4><property-group name="billing_resultlist_B2B_R3">
<property name="BILLINGDOC" columnTitle="sbt.sbs.genericsearch.billing.invoice.title" parameterType="rowkey" hyperlink="b2b/documentstatusdetailprepare.do" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildAttributesForBillingDocumentDetails" linkTargetFrameName="form_input" />
<property name="BILL_DATE" type="date" columnTitle="status.sales.date" writeUnderProperty="BILLINGDOC" defaultSortSequence="DESCENDING" />
<property name="NET_VALUE" type="number" columnTitle="status.billing.detail.netvalue" fieldOutputHandlerClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" fieldOutputHandlerMethod="buildBillingNetValue" cssClassName="amount" />
<property name="CURRENCY" type="hidden" />
<property name="PAYER" columnTitle="gs.hd.gl.partner" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildShowPartnerLinkSales" />
<property name="PAYERS_GUID" type="hidden" />
<property name="SD_DOC_CAT" type="hidden" />
<property name="OBJECTS_ORIGIN" type="hidden" />
</property-group>
</h4>
I'm trying to better understand how the R/3 tables and columns are specified in the Generic Search Framework. I know that the R/3 table and field is: VBRK.RFBSK, but in the configuration XML files, I never see this exact information specified.   How it is specified to be a part of the result set?
After reading the section in the Development and Extension Guide, I also learned about the "allowedValue" definition, and I believe that I will use that to specify the "C" value for the Invoice Document Status field.
I would greatly appreciate any help.
Thanks,
_kevin

Hi Kevin,
this means you are working in this section of the generic-searchbackend-config.xml
             <property-group name="SearchCriteria_B2B_Billing"
                             useSearchRequestMemory="true">
Below this property
                <property name="IRT_BDH_BILL_TYPE"
                          type="box"
                          entityType="BEART_BILL_TYPE"
                          tokenType="EXP"
                          requestParameterName="rc_documenttypes"
                          label="gs.att.lbl.doc.type"
                          UIJScriptOnChange="GSloadNewPageR3(this);">
                    <allowedValue value="ORDER"           description="b2b.status.shuffler.key1val2"/>
                    <allowedValue value="QUOTATION"       description="b2b.status.shuffler.key1val1" />
                    <allowedValue value="INQUIRY"         description="b2b.status.shuffler.key1val11" />
                    <allowedValue value="ORDERTMP"         description="b2b.status.shuffler.key1val3" />
                    <allowedValue value="CONTRACT"        description="b2b.status.shuffler.key1val4" />
                    <allowedValue value="INVOICE"         description="b2b.status.shuffler.key1val5" default="true"/>
                    <allowedValue value="CREDITMEMO"      description="b2b.status.shuffler.key1val6" />
                    <allowedValue value="DOWNPAYMENT"     description="b2b.status.shuffler.key1val7" />
                    <allowedValue value="AUCTION"         description="b2b.status.shuffler.key1val9" />
                </property>
please try adding this new property
                <property name="DOCUMENT_STATUS(1)"
                          entityType="CL_CRM_REPORT_SET_STATUS"
                          tokenType="RAN"
                          type="hidden"
                          requestParameterName="rc_status_head1" value="C" />
This should do the trick. Unfortunately, I don't have a E-Commerce scenario with an ERP backend for testing purposes available to you have to test it yourself. Keep me updated with the test results !
Philipp Koock
SAP CRM Web Channel Consultant
http://www.koock.net

How to add a new pin to an existing subvi

Hi,
I've been using Labview for sometime now but I still haven't found a convenient way to add a new pin to an existing subvi other than opening up the subvi and adding a control or whatever and then highlighting the code and using create subvi. Then naming this new subvi with the name of the old one. There must be a better way than doing this ??
Thanks.
John

Hi John,
I think you want to have a new connector where you can wire to.
Open the VI, create the control or indicator on the front panel and then make a right click on the icon. Choose show connector pane. Your mouse cursor changes to the wire cursor. Click in the pane on a free connector and then click on the new control/indicator. This way the control/indicator is assoicated with the connector on the connector pane. Keep the rule controls left indicators right side. If there is no more connector left you can choose a new pane.
Normally we use only a limited set of panes for all subVIs to avoid benches in the wires. Most we use the pane with 4 connectors left and 4 connectors right.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

How to add a new filter in an existing web service method (BIWS - WEBI document)

Hello Experts, we have 7 web service query's connected to a dashboard. Basically it is one WSDL URL and 7 Get Methods...Web service queries are BIWS (via WEBI document instance). There are filters setup for each of these web service methods.
Recently there was a request to add 2 new fields to the webi document and also the 2 fields need to be included as filters in the 7 methods. I know there is an option to edit the method, but when i edit the method, i cannot find the 2 new fields in list to set as filters.Can anybody help me understand how to add filters to an existiing web service method? I do not want to delete the method and republish the block as web service.
Any help will be great and points rewarded.
Thank you
Ann

Hi Ann,
The reason you are not able to see any of the new columns as a option to select in your web service block is because when you have published that block, they were not present. Add these two new objects in your block and publish it again. You will be prompted for duplication content. Select the highlighted block for duplicate and now you can see the new added objects in the filter option. Update and this will overwrite your published block. Please note, web services do appear to behave weirdly when used with dashboards so I request you to please try it in a separate test report first.
Hope that helps.
Regards,
Tanisha

How to add a new library to an existing java project

Hi ,
i just moved to writing java applications in jedit after working in eclipse for a while , in eclipse it was easy to add a new library jusr rightclick and add but how do i do the same when working with a text editor of jedit style and what do i need to change in order of javac.exe and java.exe to work properly , i tried google but i got no comprehensive article about it i'd appreciate a link or even better a simple explanation .
thanks in advance .

you just need to include it on your classpath

How to add a new column to a existing table and add data to this column?

I have a table with about 10 millions row and I want to add a new column to this table, then fill this new column with prepared data.
How to do it ?
Thank you

Can I use insert statement to add the data to new-added column?No.
07:19:37 oracle >create table test (x number);
Table created.
Elapsed: 00:00:03.05
07:19:53 oracle >
07:19:53 oracle >
07:19:53 oracle >insert into test values (1);
1 row created.
Elapsed: 00:00:00.00
07:20:01 oracle >insert into test values (2);
1 row created.
Elapsed: 00:00:00.00
07:20:10 oracle >insert into test values (3);
1 row created.
Elapsed: 00:00:00.00
07:20:12 oracle >
07:20:13 oracle >commit;
Commit complete.
Elapsed: 00:00:00.00
07:20:14 oracle >
07:20:19 oracle >select * from test;
         X
         1
         2
         3
Elapsed: 00:00:00.00
07:20:22 oracle >
07:20:36 oracle >alter table test add (y number);
Table altered.
Elapsed: 00:00:00.05
07:20:41 oracle >
07:20:41 oracle >
07:20:41 oracle >
07:20:41 oracle >select * from test;
         X          Y
         1
         2
         3
Elapsed: 00:00:00.00
07:20:43 oracle >
07:20:44 oracle >
07:20:44 oracle >update test set y=1;
3 rows updated.
Elapsed: 00:00:00.02
07:20:52 oracle >commit;
Commit complete.
Elapsed: 00:00:00.00
07:20:56 oracle >select * from test;
         X          Y
         1          1
         2          1
         3          1
Elapsed: 00:00:00.00
07:20:58 oracle >Anand

How to add a new tables in the existing Pricing Report

Hi,
I have created Z2 list report in the pricing report (V/LD) with some tables and field names.
Now I got one requirement that i have to Add some more tables and filed names in the List Report Z2 in the pricing report.
Could anyone helpme out how can i add tables and fileds names to the existing list report in the Pricing report
Thanks for your support
Best Regards
Amjathpasha

hi, Pasha:
May i know how to solve this problem? as i also met this kind of problem.
and i tried V/lb, do not find the place to add the table.
Thanks,
Linda

How to add a new .me account to existing apple id

My wife just got an iPad, and we're going to use my apple id to keep purchases on the same account. I created an apple id for her thinking I could just add it to mine, but doesn't work that way. How can I create a new .me email account for her, but keep her under my apple id? I already have an email for myself.
This is one area where apple has not made things easier. Did you use to be able to add up to 5 email accounts to one apple id? Any help/clarification would be appreciated.

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add a new column to a existing table?

Hi all,
I have requriment acc which i need toadd a new column to a exsiting table.the name of the columns is taken frm database.I.e.,
say if i have 3 names in DB name1,name2,name3
i need to add in the table these three names as columns and tat to as inputfield(tablecelleditor) .Please help me with the code, i'll give full points to everyone who gives me correct answer
Regards
Sharan and please this is Really Urgent!!! plzzzzzzzzzz
Edited by: Armin Reichert on Dec 30, 2007 7:47 PM

Hi,
You can add the following lines of code where-ever you want to add the table:
    IWDTransparentContainer tr = (IWDTransparentContainer) viewObj.getElement("trans"); // Container where table will be added
     IWDTable tab = (IWDTable) viewObj.createElement(IWDTable.class ,"Table ID");
     tr.addChild(tab);
     IWDNodeInfo nodeInfo = wdContext.nodeProducts().getNodeInfo();
     tab.bindDataSource(nodeInfo); // datasource of your table.
     // First Column
     IWDTableColumn tc1 = (IWDTableColumn) viewObj.createElement(IWDTableColumn.class, "TC1");
     IWDCaption cap1 = (IWDCaption) viewObj.createElement(IWDCaption.class,"cap1");
     cap1.setText("Column Heading 1"); // name1 of your column
     tc1.setHeader(cap1);
     IWDInputField inp1 = (IWDInputField) viewObj.createElement(IWDInputField.class,"INP1");
     tc1.setTableCellEditor(inp1);
     IWDAttributeInfo attrInfo1 = wdContext.nodeProducts().getNodeInfo().getAttribute(IPrivateTEST.IProductsElement.PRODUCT_ID);
     inp1.bindValue(attrInfo1);
     tab.addColumn(tc1);
     // Second Column
     IWDTableColumn tc2 = (IWDTableColumn) viewObj.createElement(IWDTableColumn.class, "TC2");
     IWDCaption cap2 = (IWDCaption) viewObj.createElement(IWDCaption.class,"cap2");
     cap2.setText("Column Heading 2");
     tc2.setHeader(cap2);
     IWDInputField inp2 = (IWDInputField) viewObj.createElement(IWDInputField.class,"INP2");
     tc2.setTableCellEditor(inp2);
     IWDAttributeInfo attrInfo2 = wdContext.nodeProducts().getNodeInfo().getAttribute(IPrivateTEST.IProductsElement.NAME);
     inp2.bindValue(attrInfo2);
     tab.addColumn(tc2);
     // Third Column
     IWDTableColumn tc3 = (IWDTableColumn) viewObj.createElement(IWDTableColumn.class, "TC3");
     IWDCaption cap3 = (IWDCaption) viewObj.createElement(IWDCaption.class,"cap3");
     cap3.setText("Column Heading 3");
     tc3.setHeader(cap3);
     IWDInputField inp3 = (IWDInputField) viewObj.createElement(IWDInputField.class,"INP3");
     tc3.setTableCellEditor(inp3);
     IWDAttributeInfo attrInfo3 = wdContext.nodeProducts().getNodeInfo().getAttribute(IPrivateTEST.IProductsElement.DETAILS);
     inp3.bindValue(attrInfo3);
     tab.addColumn(tc3);
For any further doubts you can always come back to me.
thanks & regards,
Manoj

How to Add a new Currency in HFM Data form and grid (Rates)

Hi Gurus,
Am very new to this forum.
Can someone explain me how to add a new currency to the existing data for or grid in the Workspace.
Regards,
Vinod

Hi Sandeep,
To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location.

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

The 4G/iOS 6 does not have an Activation Lock. That started with iOS 7.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

How to add a new column to a report

I want to add a new column to my existing report. I modified the using report wizard and added the new column. When I pressed 'Finish' I lost all my previous settings. Without changing the existing stuff, how can add a column to a table.
Any help is appreciated.
Regards
Leena
null

go to the data model editor
click on query .
add new columns in select statement.
add the corresponding fields in layout model
compile it
run it
srini

How to add another new report painter in existing T-code?

Similar Messages

Maybe you are looking for