How to Add attachments at the time of Conversion

Hi all ,
Is it possible to get the attachments at the time of conversion .
we want to attach a URL to the trancation at the time of data conversion .
Example:
if we are uploading the MM data and we want to have a URl as an attachment for every material can we add it at the time of conversion?
thanks
Naval

Using GOS ...

Similar Messages

  • How can add partner at the time of PO creation

    The requirement is to add an extra partner in the Purchase Order header Partner tab at the time of PO creation itself. The PO is being posted through Idoc. A custom function module has been maintained as inbound processing FM and it calls BAPI_PO_CREATE1 inside.Can anyone help me resolving the requirement?

    Using GOS ...

  • How to add attachments in the workspace?

    I have designed a process in which user will will initiate a task from the workspace.He will attach a file widin the workspace and next level user will view.this is working fine as i have created one process variable to stor the task attachments.My problem is that the second level user ie the assign task user is unable to add the attachment when the form comes to c his to do list.He is able to view the attachments added by the initial user.when the assign task user tries to add attachments the attachemnt list count is getting added but the attachments r not added.Can anyone tell me the solution?

    Hi,
        You can add attachments to work item from workspace using  attachments.
         If attachments tab is not visible in workspace you can modify your workflow to show attachments tab.
         Follow these steps to enable attachments tab,
          1) Open your workflow definition and edit the properties for Assign Task step.
          2) Select Attachments and Notes section and check Show Attachment Window
          3) Map Output attachments field  to a  varible of type List ( sub type  documents ) to make added attachments from workspace available to workflow.
    Regards,
    Vik

  • How to add spaces at the end of record

    Hi Friends,
    i am creating a file which contains more than 100 records.
    In ABAP i have internal table with on field(135) type c.
    some time record have length 120, somtime 130 its vary on each record.
    but i would like to add space at the end of each record till 135 length.
    Can you please help me how to add speace at the end of record.
    regards
    Malik

    So why did you said that in your first posting? My glass sphere is out for cleaning...
    Instead of type c use strings and add spaces until they have the appropriate length.
    loop at outtab assigning <pout>.
      while strlen( <pout>-val ) < 135.
        concatenate <pout>-val `` into <pout>-val.
      endwhile.
    endloop.

  • How to get rid of the "time out" when using DAQ AI in the example program

    I try an example file called "AcqVoltageSamples_IntClkDigRef" (Visual C++ .NET). It works great. However, if the program has not recieved the data, it sent out a timeout message. How to get rid of the "time out"? I cannot find anywhere in the code. Is this a property I have to reset somewhere else?
    Thank you,
    Yajai.

    Hello Yajai,
    The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
    I hope this help. Let me know if you have any further questions.
    Regards,
    Sean C.
    Attachments:
    SetTimeout.bmp ‏2305 KB

  • How to add attachments in pdf -URGENT

    Hi All,
    I need information about how to add attachments to pdf in webdynPro. I am unable to find related topics in Forums. Sample code,examples,or suggestions would be helpful.
    Thank you
    Regards
    Ravi

    Hello Ravi,
    Please take a look at: Add attachments to the Interactive form of a Web dynpro application
    Please take a look at my reply there on Mar. 29, 2007. I am not sure but i assume that you are using Web Dynpro for Java. Attachment capability is available with NW04s SP10 (both runtime and NWDS). Although, SP09 contains the required web dynpro runtime changes but the API has only been made part of SP10. Follow the note numbers provided therein.
    Best Regards,
    Krish

  • How to add a filter like TIME NOW() - {interval}

    How to add a filter like
    TIME > DATEADD(Now(),0,0,0,0,0, -[PARAMETER:interval],0)
    where TIME is a field, interval is paramter in seconds (may > 60)
    or
    a calculated field:
    TIME2=DATEADD(TIME, 0,0,0,0,0,[PARAMETER:interval],0)
    and a filter
    TIME2<Now()
    or a filter
    TIME is within a time interval previous [PARAMTER:interval] minutes

    DateAdd(receiveInput_TS,0,0,0,1,0,CreditTime,0)
    Using the same example in the PDF (data object layout) - the above "formula" worked for me. Note that if you use the above formula - it would be evaled only once, not periodically at every 5 secs or so. In order to achieve -real-time-alert-evaluation- you have to use 'ActiveNow' with the timefield in "alert"
    Alternate - the above calculation also worked correctly in the ADC dataobject layout design as calculated field. But again it will be evaluated only if the data in 'that' row changes.

  • How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How do I set up the Time Capsule without an internet connection

    How do I set up the Time Capsule as a wireless hard drive without an internet connection.   I am in a office situation in which I cannot access my work network.  I need to be able to share files on the Time Capsule over the wire connection.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How to add attachments to seeded sshr workflow  process

    Hi all,
    i have a requirement to send an offer letter as  an attachment after the final approver
    clicks on approve button  , ideally the requester is supposed to  receive  a notification of approval and
    a pdf offer letter as an attachment.Currently am  not using a custom workflow but the seeded HRSSA workflow item type
    and the process am using is HR_SIT_JSP_PRC this requirement is urgent any help will be appreciated .
    thanks in advance.

    Hello Ravi,
    Please take a look at: Add attachments to the Interactive form of a Web dynpro application
    Please take a look at my reply there on Mar. 29, 2007. I am not sure but i assume that you are using Web Dynpro for Java. Attachment capability is available with NW04s SP10 (both runtime and NWDS). Although, SP09 contains the required web dynpro runtime changes but the API has only been made part of SP10. Follow the note numbers provided therein.
    Best Regards,
    Krish

  • How to add attachments to Custom Stationary, having problems.

    I created some custom stationary by saving a page created in iWeb ,published, then choose the option -- save as stationary. All is well, I can select my custom staionary and enter text and send a message fine, but.... when I try to add an attachment none of my text stays and some of my stationary just disappears (images et al) my attachment is there and can be mailed ok.
    I just cut and paste html and don't really understand coding but i think it may be the way my page is saved. Or... can attachments not be sent in stationary without messing up the file?
    Pointers or help is appreciated.
    Thanks

    Hello Ravi,
    Please take a look at: Add attachments to the Interactive form of a Web dynpro application
    Please take a look at my reply there on Mar. 29, 2007. I am not sure but i assume that you are using Web Dynpro for Java. Attachment capability is available with NW04s SP10 (both runtime and NWDS). Although, SP09 contains the required web dynpro runtime changes but the API has only been made part of SP10. Follow the note numbers provided therein.
    Best Regards,
    Krish

  • How to add marker on the clip?

    Hi!!!
    Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
    Thanks!!!

    Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
    Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
    >     
    >
        Re: How to add marker on the clip?
        created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion

  • How to add request in the buffer

    Hii All,
    How to add request in the buffer in bulk.
    i am using following command.
    tp addtobuffer requestno <sid>
    but after doing it is giving me the following error
    C:\usr\sap\trans\bin>tp         addtobuffer     BWDK900161      BT1
    ^CThis is tp version 340.07 (release 640, unicode enabled)
    E-TPSETTINGS could not be opened.
    EXIT
    ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
    Error in TPSETTINGS: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    meaning:
      error in transportprofil (param missing, unknown,...)
    Pls help.
    Regards,
    Viren.

    Hi Rolf,
    thax for your reply.
    But still it is not working it shows following message.
    C:\usr\sap\trans\bin>tp addtobuffer BWDK900051 BT1 pf=c\usr\sap\trans\bin\TP_DOM
    AIN_BT1.PFL
    This is tp version 340.07 (release 640, unicode enabled)
    E-c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL could not be opened.
    EXIT
    ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
    Error in c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    meaning:
      error in transportprofil (param missing, unknown,...)
    Regards,
    Viren.

  • How to add filter in the dist. model

    hi,
    how to add filter in the dist. model
    thanks
    Ruban

    Hi,
    Please try this.
    1. Go to transaction BD64.
    2. Click on Change button.
    3. Expand the corresponding model view.
    4. Expand the corresponding message type (i.e MATMAS).
    5. Place the cursor to 'No filter set' and double click.
    6. Click on Create Filter Group.
    7. Add your filter from here ...
    8. Once done, save the model view.
    For more information, please check this link.
    http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
    Regards,
    Ferry Lianto

  • How to add Acrobat to the Microsoft Office ribbon?

    how to add Acrobat to the Microsoft Office ribbon?

    Hi ebender888,
    What versions of Acrobat and Office do you have? See if this post helps: https://answers.acrobatusers.com/Why-Acrobat-PDFmaker-Office-COM-Addin-tab-disappearnig-Wo rd-Office-2013-q152959.aspx
    If not, let us know what software you're using, and we'll try to get you pointed in the right direction.
    Best,
    Sara

Maybe you are looking for