How to add audio from a video while recording.

Hi,
I want captivate to recognize the audio of the video when recording a video demo. I know that it is possible in captivate 6.1 but not sure how. It sounds lame but I am a beginner.

Hi there,
Welcome to Adobe Forums.
You can do this by selecting the System Audio option on the recording window. Please refer to the below image:
Hope this helps!
Thanks!

Similar Messages

How to extract audio from a video clip

I am editting a video, and I need to extract the audio from a video clip. On the old iMovie it was really easy, all you had to do was press apple K I think. Thanks in advanced for your help.

Select the clip in the sequence.
Then command-L to unlink the clips.
Then select the audio and delete.
As a suggestion, two things:
1. Explain what you want to do. If it is delete the audio, then that is different than extracting the audio;
2. Do a search in the pdf manual in the help manual

How to extend audio from a video clip over an adjacent still image

I'm in iMovie 11. My project looks like this: video A, transition, still image B, transition, video C. I want the sound from video C to start playing while still image B is on the screen. I tried following the iMovie 11 help instructions for extending a video clip's audio. I click on video C and open the precision editor. From there I can grab video C and move it back so that it overlaps with the still image, but all that happens is the still image still shows up, without sound, and video clip C starts in the middle. The help instructions seem to indicate that I should be able to drag only the audio and make that overlap the still image, but it's not happening. Either the video and audio move together, or nothing moves.
When I try detatching video C from its audio, I just end up with a big mess because later the audio and video don't synch up.
What am I doing wrong?

I am having the same challenge... any tips here would help me out in a big way. I recorded my boss tdoing a training session and now I would like to have the powerpoint slides change as necessary - but I want the audio to remain. I would love to just get the slides to change rather than back to full before bringing up the next slide. Jim, if you come up with anything, let me know. I have VC2 pro.

How to add Audio Formats and Video Formats in one movie?

Now that FCP X will not allow different settings how would I change the Audio Format and the Video Format to one movie in Compressor 4?
When I change the Audio to ACC I have a sound file and when I change the Video Format to HD 720 I get the movie but with the original sound.
Any help is always appreciated.

Sorry for this one also. Just finally searched the Inspector windoe in Compressor 4. It is already there.

How to extract audio from home video

Hello all,
I am trying to compile an iMovie and I imported a home video shot with my Sony DSC T7 and when iMovie imports it. There is no audio!??! Is there a way for me to use the power of my Mac OS X and extract the audio before I import and then bring both into iMovie seperatly? Or is there a way to bring it into iMovie with sound? I'd appreciate the help. Thanks,
Lorne17

iMovie should import the audio/video together. Maybe you should re-post your question in the iMovie forum. It's possible that someone there had the same problem and knows the solution.

How do I get audio from mp4 video to stop playing on other slides? URGENT

I have imported an mp4 video into my Captivate file, and it plays well. But when I get to slides after that one, the audio from the video file repeats on several other slides. How do I get this ugly behavior to stop?
I don't want to unsync the audio and video because it could get out of sync on playback.
Please advise ASAP. I am supposed to be handing this in tomorrow and have spent countless hours doing workarounds on this project already...
Thank you very much for any help you can give me.
Ellen

Hello Ellen,
What is your Captivate version and what option did you choose to insert the video?
If it is Captivate 6, Can you use the Multi Slide Synchonize video. If it is a Previous version, can you select the Video and from properties choose to synchronize with project?
Does the audio play on other slides when you jump from an incomplete video to other slides or when you view the complete video and then move to rest of the slides.
Thanks,
Anjaneai

How do I take the audio from a video and divide it into separate songs

How do I take the audio from a video file and divide it into separate audio songs? I then want to export those songs into itunes.

http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

On iMovie how can you mute a section of the sound track so you can hear the audio from the video clip?

.

Hey,
If you double-click on the soundtrack you can open it up in the inspector tab and lower the soundtrack so that you can hear the audio from the video clip.
A great resource for finding answers to questions like this is http://www.imovietutorialhelp.com
You can ask questions just like these and they will be answered for you. If you need a tutorial video made or anything like that, you can go there as well and ask for a video to made as well. Check it out.
If you still have questions on how to do this, they can help you for sure.
I may receive some form of compensation, financial or otherwise, from my video or link.

Audio from inserted video keeps playing on next slide

Hello,
I'm experimenting with Adobe Presenter 6. I have inserted a
video clip into a slide. There is a stop action on frame1 with a
button that advances to frame2. The video has audio, which
unfortunately keeps playing if I advance to the next slide. If I go
once slide further ahead, the audio from the video stops. Has
anyone else encountered this problem? It's driving me crazy!
Thanks!

Hi Doc!
I actually ran into the same situation...not with a video
clip, but with a basic flash animation that had audio in it. I'm
not suggesting that the following will definitely work for you, but
it might be worth taking a look at:
Any audio that's set to "Event" while editing in Flash will
continue to "stream" , even while navigating between slides. In
most cases that I've seen (from my experience), audio will stop if
the offending slide is placed immediately before a question slide.
I realize that might not be practical in every case, so....
1. Make sure that audio sync settings in flash are set to
"Stream". What this does is effectively kill off any audio once you
navigate away from the slide that has the embedded flash on it.
2. you can always add a stopAllSounds(); method in flash, but
that's not highly recommended
UNLESS your content slide (with the offending flash object )
comes immediately before, or within a range of question slides.
Again, this too might not be entirely practical based on what
you're trying to do.
I realize that might not help, but as I said, it might be
worth taking a look at how you're incorporating your video.
Rob

Using an audio from one video to another

I am trying to make a documentary type film and I want to use an audio segment from one video to overlap another video's audio while using the second video just for the video. Here is an example of it.
http://www.youtube.com/watch?v=9u7dJXDhOjc
Im trying to acheive what they did for the first 15 seconds of this clip. I use movie 08.

This is easy in iMovie 09.
Here is [how to do it in iMovie 08|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html]

Separating audio from the video

I'm new to this version of iMovie. I only knew how to use an older one from high school, I don't know which version that was, but it had three bars at the bottom to place video and audio files.
Anyway, I need to know how to separate the audio from a video file while still being able to keep the video clip. Plus, how do you adjust the volume of only certain clips, like for it to start off quiet, but gradually increase in volume?
Thanks!

[See this blog post for instructions|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-cli p.html]
This all becomes much simpler in iMovie 09.
For working with Audio [see this tutorial|http://www.apple.com/findouthow/movies/imovie08.html#tutorial=audiocli ps]

How to add audio to image sequence?

I've imported a Photoshop image sequence into FCP X 10.1.1. Dropped it on the timeline, created a compound clip. So far I can't figure out how to add audio of any kind. I've tried starting over, making sure properties had audio setting enabled. No change though. No matter what I try, no audio tab in the inspector. What am I missing?
Thanks,
Michael

Are you importing an audio file that is seperate? Otherwise it is attached to your video. in the timeline, choose expand audio & video. You can import almost any format. Import it into the same event that you are in - a song from your desktop or from your folder where you copied all your contents from your camera card or music from ITunes (in which case you use the audio tab on the far right of the timeline UNDER THE INSPECTOR).
How did you import your media?:
Help?

After I detach audio from the video, and I go to delete the video portion but keep the audio, it deletes both. Am I doing something wrong?

Hello Everyone!
I would appreciate your support if you can. I know how to detach the audio from a video clip. Once this is done I wanted to add another video shot (B-roll) over the audio I detached. When I go to delete the video (which is detached form the audio) It deletes both of them automatically.
Is there something I am doing wrong? Do I need to unpin the audio somehow?
Thanks again.
RJ

Hey I found the info I needed. I decided to show it to anyone else who may be looking for this same answer.
http://www.youtube.com/watch?v=xmP0mUKsJwU

1) How to seperate audio from visual 2) How to pan / tilt on stills

I recently enquired about how to add B rolls, which I got good answers to. In the same 'narrative' video clip, I'd like to know how to actually seperate the audio from the video, so I can edit and save the audio as a totally new narration clip? The second question relates to 'animating' still photo clips. I figured that I don't need to travel miles to a particular mountain to video it. The mountain won't move, only my camera will, if I tilt or pan it. Accordingly, it makes more sense to download good quality photos of a targeted site, and apply pans & tilts to the photo. Other than printing the photo and taking video of it in a studio, I was kind of hoping that the combined software package I brought of premiere & photoshop elements, will allow me to do it digitally within the program? Could you kindly advise me in fairly simple terms, as I'm still finding my way around digital editing in general. Thanks!

another newby wrote:
I recently enquired about how to add B rolls, which I got good answers to. In the same 'narrative' video clip, I'd like to know how to actually seperate the audio from the video, so I can edit and save the audio as a totally new narration clip?
Right-Click the clip and select 'Unlink Audio and Video'. Sound can be exported through File> Export> Audio.
another newby wrote:
Accordingly, it makes more sense to download good quality photos of a targeted site
If you do this you should ensure that your downloads are in the public domain & royalty free.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Can you record the audio from a Video embedded in a pdf?

I can't seem to find anything on this, so I will ask. A client sent us a company produced interactive pdf and wants us to use the audio from a video clip that is in the pdf. We asked for the audio clip but they don't know who to get it from and just keep saying it is in the pdf. While others try to explain that a pdf and an mp3 are not the same thing. I get to look into a fall back position of trying to extract the audio (or video). There is no copyright issue here. Client peon just can't/won't get the proper file.
Maybe some one can help or point me to info that says it is not possible.
Thanks.

WireTap Studio did the trick. I downloaded a free Trial version and bob's yer uncle.
Thanks Michael

How to add audio from a video while recording.

Similar Messages

Maybe you are looking for