How to add audio or video in KeyNote?

Can music from ipad be added to a Keynote presentation?

Hi there,
You may find the information at the website below helpful.
Keynote Help for iPad - Add video and audio
http://help.apple.com/keynote/ipad/2.2/#/tan63d61519a
-Griff W.

Similar Messages

How to add audio to image sequence?

I've imported a Photoshop image sequence into FCP X 10.1.1. Dropped it on the timeline, created a compound clip. So far I can't figure out how to add audio of any kind. I've tried starting over, making sure properties had audio setting enabled. No change though. No matter what I try, no audio tab in the inspector. What am I missing?
Thanks,
Michael

Are you importing an audio file that is seperate? Otherwise it is attached to your video. in the timeline, choose expand audio & video. You can import almost any format. Import it into the same event that you are in - a song from your desktop or from your folder where you copied all your contents from your camera card or music from ITunes (in which case you use the audio tab on the far right of the timeline UNDER THE INSPECTOR).
How did you import your media?:
Help?

How to add your own videos or photos?

I want to know how to add Photos and Videos from my PC to my iPod...

Well, there are a few ways. I'll tell ya two. First is iCloud. If you don't already, you can create an Apple ID and set up iCloud. To set up iCloud on PC, visit this site. Everything should sync after that.
You can also use iTunes to sync up everything. First, put the photos that you wanna put on your iPod on to iPhoto. Put the videos you wanna put on iTunes. Like, drag the video into the "Videos" tab on iTunes. Then, go to the the iPod in "Devices" connected to iTunes. Once you select the phots and videos, press Apply/Sync.
You're done.

I forget how to add audio to a document I have made.

I forget how to add audio to a document I have made.

lola2610 wrote:
I can duplicate but that is not what I am looking for.
This is what it is for. Save As doesn't change the behaviour of Autosave. All changes always get saved at all times. If you want to save as a new document, then do that. If you want to do a save as, just don't make any changes beforehand.
Second problem is the load of internet pages! It is sooooo slow...
Try a new DNS server such as OpenDNS. The ones your ISP gives you can be very bad.

How to transmit audio and video simultaneously?

Hi,
I am new at jmf.Now i have a problem that how to transmit audio and video at the same time.The AVTransmit can transmit only one media,audio or video.Anybody have experience with it?Please help me.Thanks a lot!

Hi, audio and video data must be transmitted in 2 distinct RTP sessions, by using different ports at sender side.
At receiver side, the port can be only 1.

How to add audio to keynote on iPad

I want to add audio to a presentation on keynote but I don't know how? There isn't an option to add audio in the media section.

Hello Cami231100,
Thank you for using Apple Support Communities!
It looks like you will have to add the audio in Keynote on your computer, then import the project to your device from iTunes.
Keynote for iOS (iPad): Animate objects on a slide
http://support.apple.com/kb/PH3486?viewlocale=en_US
You can also include music and sound effects in your presentation by placing an audio file onto a slide. To add an audio file to your presentation, you must first import a presentation that contains the audio file you want to use, and then copy and paste the audio file to any slide or presentation on your iPad.
This article will help you get the project to your computer, so you can add the audio, and will help you get the project back to the iPad.
Keynote for iOS (iPad): Share presentations by connecting to your computer
http://support.apple.com/kb/ph3497
Cheers,
Sterling

How to add audio to an PS-animation

How can I add audio to an PhotoShop CS5 (ext) animation?
Fred

Maybe you should check over at
http://forums.adobe.com/community/design_development/animation
or the Fora dedicated to one of Adobe’s video editing program’s – not that there may not be free programs available for such tasks.

How to add audio files.

I'm using Premiere Elements 11 on my iMac. I can't for the life of me figure out how to add music files to the 8 or so that come with the program. Anybody else having this problem or am I just dumber than most?

Comstar 11 wrote:
As I put in my original post I might be dumber than most and that's still a possibility. I also tried the "Use Smartsound" same feeling that I didn't like the add on that just took me to another site to sell me music. I couldn't find the "Project Assets" box after looking almost everywhere. But..... I was in the "Quick" mode. Knowing I was a rank beginner I avoided the "Expert" tab. But after looking everywhere else I opened that tab and "It's A Miracle" there it was. Still stumbling through the learning process so thanks for your kind help. If I hit the wall again I'll make another post looking for help. Thanks Again.
I tried the Quick mode. When I did 'add media' in the upper left corner, video files went straigt to the project box. Then I tried an audio file and it went below the video in the project box. So, I see where in 'Quick' the 'Project Assets' box and step are skipped. Sorry about misleading you.
Either way, audio files get to the project box when you pick them up as a file on your computer.
There are two great sources to speed the learning process. lynda.com has courses that are like a personal demo of everything PrE does with a great coach explaining it. http://www.lynda.com/Premiere-Elements-tutorials/Up-Running-Premiere-Elements-11/109763-2. html A few if the chapters are free as a trial. The fee is $25 for a month of access. One month is more than enough if all you want is the one course.
If you prefere owning a course on a disk, video2brain is an alternative, but I don't think it is as thorough.
Bill
Bill

How to add audio to individual slides?

According to the Keynote User Guide 2009, on page 70, it is possible to add a sound file to an individual file so that the sound stops when you go to the next slide and you can use a different sound file. What I want to do is use three or four songs on one power point presentation. It says you can do this but does not tell HOW to do it! There is an illustration of how to add sound for an entire slide show, but not for individuals slides. When you place the sound file in the window in the Inspector it goes for the entire show. But not indication how to do it for individual slides. Please inform, thank you.

Just drag the audio file onto the slide, and it will play when the slide appears. You can also use Builds to start and stop the audio.

How to add audio to sequence of slides, not whole presentation nor individual slide?

I want to add an audio track which will play during a sequence of slides in Keynote, but I can only find how to add to a single slide or add to whole presentation.

Question asked and answered many times. Here is one…
https://discussions.apple.com/message/12787720#12787720

How to synchronize audio and video rtp-streams

Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?
How are you supposed to sync audio and video if not with as above ?

camelstrike wrote:
Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

File audio e video in keynote per ios

Ho dei file audio e video nelle rispettive cartelle dell'iphone, come faccio ad inserire quei file in una presentazione con Keynote??? Grazie
Quando cerco di inserire qualcosa mi esce solo la scelta delle foto e dei video in cartella foto!

FOUND THE SOLUTION:
I had this same problem and this resolved it for me:
-Go to your "Settings" icon and click on the "General" tab.
-About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
-Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
My audio worked fine in embedded videos after I did those two things. Hope it works for you.

Satellite A80: How to restore audio and video codecs?

How can I restore the audio and video codecs which are installed by default on my Satellite A80 with XP Home edition?
I removed them in safe mode because of a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
Now I need to set the standard audio en video codecs back.
I already downloaded the codec package from Microsoft Mediaplayer and have sound en video again in Media Player.
Unfortunately I still don't have sound in Toshiba Diagnose Program when testing Midi and Wave sound.
System restore came up with the message that restore was not possible because no changes had been made.
Message was edited by: roel

Have investigated in the forum and found this different codecs:
-Zsunami Filter Pack: (3.9.9)
- Nimo Codec Pack: (5.0 Final)
- ACE Mega CoDeC Pack: (5.93)
- Codec Pack Elisoft: (13.505)
- K-Lite Codec Pack: (2.2) Full
- SLD Codec Pack: (1.5 Pro)
- All in One: (5.0.6.1)
- The Codecs: (1.1 full)
Well, if the system restore does't work try to install one or several codecs from this list.
Have found it in this posting:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=12068&messageID=44047
good luck

How to add/edit render video presets?

I can't find how to add or edit render video presets used in (File->Export->Render Video) dialog.
Am I missing something?

JJMack wrote:
I'm afraid that your are right there are preset in CS6 for its media server dll and they are stored where you found them. You can use the preset and modify setting in the preset for a custom rendering. However there is no save new preset button so your custom setting can be saved as a new preset.
Yes, You can modify some rendering parameters (Dimensions, Frame Rate, Field order, Aspect Ratio).
But You can't modify preset settings. What I mean is target bitrate, maximum bitrate, key frame distance etc.)
You can't even determine what the settings are... (unless I missed something?)
To get the full Media Sever you need an Adobe video product like Premiere Pro. Perhaps use a trial verson to create additional preset that can be added to Photoshop CS6 presets. Presets for better Quicktime support for example.
This is not the issue. I have CS6 Master Collection installed...
Photoshop don't see Media Encoder presets and vice versa...

How to add audio track to Final Cut Express

Does anyone know how to add a audio track to Final Cut Express? My default is four available tracks. What if I want to have 6? How can I add a additional two to the timeline?

Move your cursor into the gray area below the A4 audio track, then control click and select Add Track.

How to add audio or video in KeyNote?

Similar Messages

Maybe you are looking for