How to add bar code in report(se38 develop)
hi all,
as a existing abap report which print out the report with a lot of special logic, so i want Use abap report program to print bar code instead of smartforms . how to process?
thanks.
james
Hi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM
Similar Messages
-
How to add Custom code in Report Painter
Hi All,
I have a requirement to add Authorization checks at Profit Center Level for 8A-PCA001G report. This is the first time am working on Report Painter/Writer. I am wondering whether i can add custom code or not. Please suggest me how to do this. I copied 8A-PCA001G into a zreport but did not find anywhere to add custom code.
Any help would be really appreciated.
Thanks,
KumarHi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM -
How to display BAR-CODE through ABAP report
Hi,
Could you please help me, how to display BAR-CODE through the ABAP report.
I am writing below code, but BAR-CODE is not displaying on report.
PRINT-CONTROL FUNCTION 'SBP01'.
WRITE: 20 BAR_CODE1 NO-GAP.
PRINT-CONTROL FUNCTION 'SBS01'.
Regards,
SSRAJU.Hi RAJU,
you can see this forum link and its sub-links, here it is clear about it.
Re: Barcode printing on report
Thanks & Regards,
Dileep .C -
How to find bar codes and mails to send clients in smartforms
HI friends,
How to find bar codes in smartforms and also how to send mail to the client. I have developed one object in smartforms, but i don't know how to send maill to the client. Pls help me........................
Thanks in Advance.
Saradhi.Hi!
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Regards
Tamá -
Hi,
How to create Bar code?
Explain the steps.Hi,
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
<b>To Create a Bar code Prefix</b>
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Regards,
Padmam. -
How to Print Bar codes in SAP script.
Hi Experts,
Could you please tell me how to print bar codes through sapscript (the steps basically)?
<<text removed by moderator>>
Thanks in advance,
Suchi.
Edited by: Matt on Nov 13, 2008 2:04 PM - do not use ASAP or urgent.hi,
check these.
[https://forums.sdn.sap.com/click.jspa?searchID=18572128&messageID=4724540]
[http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm] -
How to add a code TestIfElse(10) to the Main method of the Program.cs class?
How to add a code TestIfElse(10) to the Main method of the Program.cs class?
Here is my code and I have copied from the Wiley book for Microsoft certification page 14,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace ifelse_Statement
class Program
static void Main(string[] args);
TestIfElse(10);
public static void TestIfElse(int n);
if(n < 10)
Console.WriteLine("n is less than 10");
else if(n < 20)
Console.WriteLine("n is less than 20");
else if(n < 30)
Console. WriteLine("n is greater than or equal to 30");
Here is the error list I am getting,
Error 1 Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 13
switch_Statement
Error 2
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 24
switch_Statement
Error 3
Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 9
ifelse_Statement
Error 4
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 20
ifelse_Statement
Error 5
Invalid token 'if' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 9
ifelse_Statement
Error 6
Invalid token '10' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 7
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 8
Invalid token '(' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
18 35
ifelse_Statement
Error 9
A namespace cannot directly contain members such as fields or methods
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
20 10
ifelse_Statement
Error 10
Type or namespace definition, or end-of-file expected
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
30 1
ifelse_Statement
Error 11
The type or namespace name 'n' could not be found (are you missing a using directive or an assembly reference?)
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
16 12
ifelse_Statement
Error 12
'System.Console.WriteLine(string, params object[])' is a 'method' but is used like a 'type'
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
18 26
ifelse_Statementstatic void Main(string[] args){
TestIfElse(10);
public static void TestIfElse(int n)
if (n < 10)
Console.WriteLine("n is less than 10");
else if (n < 20)
Console.WriteLine("n is less than 20");
else if (n < 30)
Console.WriteLine("n is greater than or equal to 30");
Fouad Roumieh -
Use of Bar Codes in reports and fonts
Hi,
I've copied Word fonts for the bar codes in the folder "Windows font "on mi pc. Then I opened a DESKI report and I used the same font in the report. I must repeat the same operation on all pc's in the company and on the Application Server where is located the CMC?
Thanks in advance and best regards,
Andrea CozzaniHi Edmar
I think the solution is for every user who is seeing the Reports PDF output in the browser, to have the relevent font in Acrobat. We have introduced Single Byte Type 1 Font Embedding and True Type font subsetting features in Reports 9i and if the resultant pdf output has any of these font types, you can use these features. In this case, user does not need to have the Font installed.
Also In Reports 9i, you can create a bar code font report using Barcode bean. Please have a look at
http://otn.oracle.com/products/reports/htdocs/getstart/examples/index.html
for more detail.
Thanks
The Oracle Reports Team -
How to add filter in Bex report
hi how to add filter in BEx report and what is the difference between filter and free charcteristics.
Regards,
Viren.Hi Viren,
difference between filter and free characteristics is that free characteristics can be added to drilldown at query runtime. Filter values can not be changed at query runtime.
You can add a filter to a query by placing a characteristic in filter section and restrict the characteristic to certain values. Characteristics in rows / columns / free characteristics section can be restricted to certain values, too.
Best regards,
Björn -
Hi,
How To add Logo in ALV Report?
I need step by step explanation.Hi uday,
go through this hope u can understand.
*&amp; Report Z_OOALV_LOGO
*&--Sample Program using ooalv-> by SrikanthV--
REPORT z_ooalv_logo.
****DECLARATION FOR LOGO INSERT
CONSTANTS: cntl_true TYPE i VALUE 1,
cntl_false TYPE i VALUE 0.
DATA:h_picture TYPE REF TO cl_gui_picture,
h_pic_container TYPE REF TO cl_gui_custom_container.
DATA: graphic_url(255),
graphic_refresh(1),
g_result LIKE cntl_true.
DATA: BEGIN OF graphic_table OCCURS 0,
line(255) TYPE x,
END OF graphic_table.
DATA: graphic_size TYPE i.
CALL SCREEN 100.
*&----
*& Module PICTURE OUTPUT
text
MODULE picture OUTPUT.
DATA: l_graphic_xstr TYPE xstring,
l_graphic_conv TYPE i,
l_graphic_offs TYPE i.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = 'GRAPHICS'
p_name = 'EDS'"IMAGE NAME - Image name from SE78
p_id = 'BMAP'
p_btype = 'BCOL'
RECEIVING
p_bmp = l_graphic_xstr
EXCEPTIONS
not_found = 1
OTHERS = 2.
graphic_size = XSTRLEN( l_graphic_xstr ).
CHECK graphic_size > 0.
l_graphic_conv = graphic_size.
l_graphic_offs = 0.
WHILE l_graphic_conv > 255.
graphic_table-line = l_graphic_xstr+l_graphic_offs(255).
APPEND graphic_table.
l_graphic_offs = l_graphic_offs + 255.
l_graphic_conv = l_graphic_conv - 255.
ENDWHILE.
graphic_table-line = l_graphic_xstr+l_graphic_offs(l_graphic_conv).
APPEND graphic_table.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown " 'X-UNKNOWN'
size = graphic_size
lifetime = cndp_lifetime_transaction "'T'
TABLES
data = graphic_table
CHANGING
url = graphic_url
EXCEPTIONS
dp_invalid_parameter = 1
dp_error_put_table = 2
dp_error_general = 3
OTHERS = 4 .
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
CREATE OBJECT h_pic_container
EXPORTING container_name = 'LOGO'.
CREATE OBJECT h_picture EXPORTING parent = h_pic_container.
CALL METHOD h_picture->load_picture_from_url
EXPORTING
url = graphic_url
IMPORTING
RESULT = g_result.
ENDMODULE. " PICTURE OUTPUT
Reward points if helpful.
Thanks -
How to use Bar code field in Item master
Hi Experts
I want to know that How to integrate Bar code scanner data with SBO. Bar code contain many information like price, serial no., description etc . For example I want that when I read a barcode by barcode scanner it automatically update itemcode, description , price and serial no.
Thanks
regards
GorgeHello Gorge,
A barcode would ideally contain only an identification code and not other information. All such information like price, etc. should be fetched from a database, after reading the barcode, and identifying the item.
You can simply enter the barcode in the Item Master Data and than use the barcode field to identify the item in sales / purchase documents instead of itemcode or itemname.
Rahul -
How to install bar code printer.
Dear All,
A issue in my company that i have to install BAR code printer.But i dont have any idea how to install BAR code in sap..AS i m the BASIS guy this is the first time i m facing this issue...plz tell me how to resolve this...
Regard'sHi,
yes, same way as you doing for other printer in SPAD
just select your device from device type in Device attribute
then select your appropriate host spool access method and host printer.
SE73 is use for font maintenance which are use in SAP script .
also check following forum to define printer
SAP prints from Suse Linux OS
regards,
kaushal
Edited by: Kaushal Malavia on Jun 20, 2008 6:24 PM -
How to generate Bar codes from Crystal Report
I understand that Bar Codes can be genrated from Crystal reports. I am using CR 2008 and trying to convert my Inventory items to bar codes. it does convert it and I can see the bar codes but it looks like; just a garbage and scanner does not recognze it plus the numners are missing @ the bottom.
Anybody has ever tried this and have some simple instructions to start with.
Any help will be appreciated highly.
Regards,Hi,
What barcode are you using and what barcode font?
If you are using Code39 or Postnet then you need to make sure your values are formatted properly by creating a formula and using the barcode functions.
Have a search in the forum for barcodes. It's been talked about a lot and you should find your solution.
Good luck,
Brian -
How to add a column in report painter
Hello
i have a profit centre report where i have the profit centre group name in the header and i want to move it to column.
could you please let me know how to do this?
ThanksHI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
How to add new column in Report ME2L
Dear Sir,
We are using ME2L for various purposes . In the ME2L report we need to add 2 new columns i.e Item Delivery Date and WBS Element .
Although in the standard ME2L report , after the basic list generation , there have been provided 2 icons for getting the report displayed with either WBS Element or with Delivery Date . It means we can not get both the column Delivery Date and WBS Element available simultaneously in the standard ME2L report .
We request you to kindly guide us as how can we add these column in the ME2L report pl . We are on ECC-6.0 and not having enhancement package 4.0 .
Kindly help us pl .
Regards
Sonia AgarwalHI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar
Maybe you are looking for
-
Anyone know of a fix for blue screen of death
-
Print out of GI inspection sheet
I am facing one problem from an user pertaining to automatic print out of GI inspection sheet.Here first goods receipt takes place with movement type 103 and then goods are placed into unrestricted stock through movement type 105(placing material int
-
64-bit Illustrator CS6 Print Issue
I'm having a major lag issue when printing directly from 64-bit Illustrator on Windows 7. When I try to print, the program locks up for 30 seconds before sending the print job. Not to mention that once the file does print the fonts get messed up as w
-
Notebook fails to wake up after second suspend
With kernel 2.6.26, my Toshiba notebook rebooted when suspending/hibernating. With kernel 2.6.27, the first time I suspend works flawlessly, but it fails to wake up after a second suspend. I can hear the hard drive start up (it doesn't sound like it'
-
New FAQ Entry on JVM Parameters for Large Cache Sizes
I've posted a new [FAQ entry|http://www.oracle.com/technology/products/berkeley-db/faq/je_faq.html#60] on JVM parameters for large cache sizes. The text of it is as follows: What JVM parameters should I consider when tuning an application with a larg