How To Add Business Partner Catalog Numbers throuh the SDK (OSCN)

Is there an SDK Object to Add Business Partner Catalog Numbers (form 993)
I would like to use a sdk object to Add Business Partner Catalog Numbers instead of using SQL to insert into the OSCN table
Sincerely yours
Riade Asleh

Hi Riade,
I suggest that you post this question in the forum for B1 SDK.
Best, Winald

Similar Messages

Unable to remove business partner catalog numbers

Hello,
I have created a business partner catalog number for one item.
Now I want to remove that catalog number but it is not possible.
I have tried to remove the catalog number over the menu item "Data" and the function "Remove".
I get the positive system message "Operation completed successfully" but the catalog number is still there.
Any idea?
Thanks
Jacqueline

Hi,
I have tried the same in my database. It works fine. We can remove the Business Partner Catelog Number from the Item Master for any item eventhough we have performed transactions in that item.
Try once again to remove the BPCN. if it fails, please try to inform SAP and they will solve this bug immediately.
Raja.S

How to add two different page numbers in a single page

How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

How to create business partner temblet

Dear friends,
        how to create business partner temblet .
please send the following mail address
   [email protected]
                  Thangs in advance
Regards,
S.Siva

hi
Refer to the links below might get u some info
General Business Partner-initial screen
http://help.sap.com/erp2005_ehp_02/helpdata/en/39/0b77a9df3011d189fc0000e829fbbd/frameset.htm
Business partner as Template
http://help.sap.com/erp2005_ehp_02/helpdata/en/2f/3a2a09969611d2ac750000e829fbfe/frameset.htm
Business Partner
http://help.sap.com/erp2005_ehp_02/helpdata/en/43/a0dfe510d825e5e10000000a1553f7/frameset.htm
Creating or Changing Master data Template
http://help.sap.com/erp2005_ehp_02/helpdata/en/c7/adcef39296f94e8ef7077ce160200e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/57/92f63aad7e3014e10000000a11402f/content.htm
http://b1up.net/index.php?id=modules
Reward if USeful
Thanx & Regards.
Naren..

How to Create Business Partner with fix number in t-code :BP

Dear SIr,
Normally I will set number range for auto to create Business Partner. In case , If we would like to crea How to Create Business Partner with fix number in t-code :BP , howe to do?
Please kindly advise.
THnak you and best regards,
Vimol

Dear Shobhit,
How to put the thread as you mentioned.
Best regards,

How to create Business Partner in CRM 2007

Hi gurus!! how are you? I´m a rooky to sap crm and I would like your help and guidance to know how can I create a Business Partners and Roles.
Whatever detailed help or documentation you may give me will be rewarded =)
Thanks a lot in advanced!!!
Lorena.

Hello!
In the WebUI there are different Business Partner Types (Person, Organization, Group).
From user perspective you can differentiate between:
- Corporate Account (Organization)
- Individual Account (Person)
- Group Account (Group)
- Employee (Person)
- Contact Person (Relationship) (Person)
All these Business Partner have an own Overview-Page. Usually you can create the Business Partner starting from the related Search-Result-List (by default the new-button is not available for Employees as a Sales Rep usually doesnu2019t create new Employees u2026).
You can assign Business Partner Roles to these Business Partners (there is an own Assignment-Block within every Overview-Page of a Business Partner). Some roles will also get assigned automatically, if you create this Business Partner.
However it is possible to assign multiple roles to the Business Partner. Itu2019s also possible to have different Views of one Business Partner. E. g. an Individual Account can also be a Contact Person for another Account. But here it is not the Role determining the View it is the Contact Person Relationship doing this.
The Role itself also has an impact on the UI of the Business Partner as dependent on the Roles some Assignment-Blocks are displayed or not.
I hope this was not confusing u2026
Best regards
Arno

How to create business partner in solman

How to create business partner in solman?...

Hi,
Check pages 8 - 11 in this document.
https://websmp209.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
This would solve your problem.
feel free to revert back.
--Ragu

Add business partner to target group - some data missing

Hello,
I created a target group. This target group includes data of person and the associated data of organization (for example: city, street, ...). Now I want add some other person. I have two opportunities when I have open the target group:
1. In the table of the target group
In the column "Business Partner ID" I can open the input help and search the person which I want add zu the target group
2. In the view of the target group
On the top there is a button "Import Business Parterns", there I can upload txt files with the bp-no. from the person.
It works only the first possibility. There are all data of person and organization included.
At the second possibility there are the data of person included, but it lacks the data of organization and I don't know why.
Does anybody know, what's the problem? Is it standard or is it a bug?
Thank you in advance.
Best regards, Jasmin

For information:
When you want add business partner by file upload to the target group, in the SAP standard the target group can handle only one ID, either the account ID or th contact ID. So when I add some contact IDs by file upload to the target group then I miss the data of the account. So, I have to build up the same target group a second time.

How to search Business Partner filter by country

As topic above, how to search Business Partner filter by country, which table is involve?
Appreciate your kind effort
Thx

Hi
1) you can use the function module 'BAPI_BUPA_SEARCH' to filter BP by country. In the address data field, you can enter country code (say IN for India) and this will return you the list of BP's belonging to the country.
2) You can use view BBPV_BUPA_ADDR to see the BP's for a particular country.
for this view, if you look at the "Table/Join Conditions" tab, you can see the underlying tables used for join ->
BUT000 ->BuPA Master
BUT020 ->BP Address table
ADRC ->Address services.
Hope the above info helps.
Regards
Nisha

How to search business partner on address?

Hi,
When I open the form "master data business partner" in search mode, the tab "Adresses" is gone. How can I search for business partners in a particular street or municipality? I can find it by writing a SQL query, but my end-users cannot do this. They want to do it with the normal way. Is this possible with SAP B1 (version 8.8)?
Thank you for your helpful answers!
Regards,
Pieter Verhaeghe

Hi Pieter......
This Functionality is not given in SAP in standard but you can have a work around.
You can create a UDF at Business Partner Master Data Level where you can display the value of Municipality or state through FMS and later when you take it into Find mode, the udf still be there and you can search by your way.......
Hope this work around helps you for your query.......
Regards,
Rahul

HOW TO ADD BUSINESS RULES

HI EVERY ONE,
I HAVE A REQUIREMENT WORKING ON MM , I HAVE SOME BUSINESS RULES IN FUNCTIONAL DESIGN DOCUMENT AND I NEED TO WRITE THE TECH DESIGN . MY QUESTION IS HOW TO ADD BUSINESS RULES IN TECH SPEC. EXAMPLE I HAVE FINAL DUE DATE AS BUSINESS RULE i.e,
Final Due Date = Baseline Date + Maximum Day Term
If Clearing Date is = Final Due Date = Invoice is Paid-On Time
If Clearing Date is < Final Due Date = Invoice is Paid Early.
If Clearing Date is > Final Due Date = Invoice is Paid Late
I have the data available for Final Due date from R3 .
So after creating the Info Object( characteristic), where can I add this formula for that Z INFO OBJECT ? I have total of 5 business rules like this in my funtional doc
Help will be appreciated . Points will be assigned if my problem solved...
thanks

Hi Harish,
With the assumptions:
1. You are using a BI 2004s system
2. The fields Baseline Date, Clearing Date & Maximum Day Term are being sourced from R/3
The rules can be coded into the End Routine in the Transformation.
If you are using a BW 3.x system, this logic can be coded in the Start Routine at the Transfer Rules or the Start Routine at the Update Rules.
Hope this helps.
Regards,
Shrikant

How ro Add or remove page numbers?

How ro Add or remove page numbers in Numbers?

Hi Michael,
In Numbers 3.2, Menu > File > Print... to go to Print Preview.
Hover the cursor over the page display until the page footer appears. Select the page number.
and press delete. Gone!
Regards,
Ian.

Is there a DTW template for Business Partner Catalog Number imports?

I could not find it, quite possible may have overlooked it. Tried to enter the BP catalog numbers against the base items manually. That took a long time and afraid, any repeat of data entry will kill me. So it is best to have a DTW import template. Please point me to where it is hidden?
Thanks.

Check this first:
Upload BP Catalog
Thanks,
Gordon

My business partner signed up for the acrobat xl pro, and added me to the account. it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click. I tried

my business partner signed up for the acrobat xl pro, and added me to the account. it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click. I tried to download again, and still same thing. I am on a mac with latest OS. Does anyone know what I am doing wrong?

he is on a pc, we bought a subscription to the license and was told it's 180 a year or 14.99 monthly per user, on the business plan. So the sales rep on the phone walked us through adding the people who will be added to account who will need a license to use. the sales rep said that we just need to go to that section and add users and it will email the user a link to download the file and install

Help: How to add a library item to hide the default Window menu

Hi,
In this post: Help: How to add a library item to hide the default Window menu, it described how to create an menu that will hide the default window menu.
I'd like to know if there a way to put this component into library so that others can directly inherit this menu in other FORMS and how to implement it.
Jimmy

Hi,
I found the solution and the post was not properly phrased. There is no need to add menu into library. All we need is to put the compiled menu into Oracle AS and add the menu name the menu module of the given form.
Thanks.
Jimmy

How To Add Business Partner Catalog Numbers throuh the SDK (OSCN)

Similar Messages

Maybe you are looking for