How to add business systems into DIRECTORY?

Hi,
I have problem to add business system into Business Systems list in my scenarion in the Integration Directory. These systems are already in the SLD, but when I try to assign a business system, I have only choice to assign XI...
How to solve this problem?
Thanx 4 answers!
Peter

hi Peter,
maybe your business systems are already inside ID?
BTW
did you assign you business system to a correct
integration server? (when definig the business system)
also remember to refresh SLD data cache from ID
- environment
- clear SLD data cache
Regards,
michal
Message was edited by: Michal Krawczyk

Similar Messages

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • How to add buisness system in Integration directory -objects

    Hi All,
    I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
    so in the integration directory,
    objects--->service without party >buisness system>
    in the buisness system , whatever buisness system i created the  is not found.
    how to add buisness system into integration directory -- objects.
    Regards,
    vinoth.

    Hi,
    go to integration directory,
    objects--->service without party >buisness system>
    select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
    If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
      and do the same process again..
    Regards,
    Venu.

  • Importing new business systems into Integration Directory PI 7.1

    Team SDN,
    Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version).  There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
    Please share with members if wht are the new changes in PI 7.1 work proceses  like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
    Thanks SDN.

    Hi Madhu,
    If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
    refer below link..
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
    Regards,
    Raj

  • Business Systems into ID

    Dear All,
    Could anyone please let me know how to import business systems Created in SLD into ID.
    one more clarification.
    if i add new business system to my existing landscape and i want to import to my ID, will it effect my existing scenarios which are already running.
    if i want to achieve above requirement ...please guide how to do this
    Anticipation of your Early response
    Regards,
    VJ

    Hi,
    1.create a scenario,
    2.Right click on Busyness system adn click assain busyness system.
    3.It will show a wizard hear click u r Created Busyness System in SLD and uncheck automatically genarated cc
    4.Click Finish.
    By follow this steps a Busyness system in ID created from SLD..
    It will not effect by adding another busyness system...
    Plw award points
    thanq

  • HOW TO ADD BUSINESS RULES

    HI EVERY ONE,
      I HAVE A REQUIREMENT WORKING ON MM , I HAVE SOME BUSINESS RULES IN FUNCTIONAL DESIGN DOCUMENT AND I NEED TO WRITE THE TECH DESIGN . MY QUESTION IS HOW TO ADD BUSINESS RULES IN TECH SPEC. EXAMPLE I HAVE FINAL DUE DATE AS BUSINESS RULE i.e,
    Final Due Date = Baseline Date + Maximum Day Term
    If Clearing Date is = Final Due Date = Invoice is Paid-On Time
    If Clearing Date is < Final Due Date = Invoice is Paid Early.
    If Clearing Date is > Final Due Date = Invoice is Paid Late
       I have the data available for Final Due date from R3 .
    So after creating the Info Object( characteristic), where can I add this formula for that Z INFO OBJECT ?  I have total of 5 business rules like this in my funtional doc
    Help will be appreciated . Points will be assigned if my problem solved...
    thanks

    Hi Harish,
    With the assumptions:
    1. You are using a BI 2004s system
    2. The fields Baseline Date, Clearing Date & Maximum Day Term are being sourced from R/3
    The rules can be coded into the End Routine in the Transformation.
    If you are using a BW 3.x system, this logic can be coded in the Start Routine at the Transfer Rules or the Start Routine at the Update Rules.
    Hope this helps.
    Regards,
    Shrikant

  • How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

    My question is that How to add a report into the SAP-SCRIPT .
    by using PERFORM ......ENDPERFORM
    I don't know how to used it .

    Hi Sandeep,
    Please check this link
    http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
    http://www.allinterview.com/showanswers/37425.html
    Calling ABAP Subroutines: PERFORM
    You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
    PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
    Syntax in a form window:
    /: PERFORM <form> IN PROGRAM <prog>
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
    The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
    FORM <form> TABLES IN_TAB STRUCTURE ITCSY
    OUT_TAB STRUCTURE ITCSY.
    ENDFORM.
    The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
    The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
    From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
    Definition in the SAPscript form:
    /: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
    /: USING &PAGE&
    /: USING &NEXTPAGE&
    /: CHANGING &BARCODE&
    /: ENDPERFORM
    / &BARCODE&
    Coding of the calling ABAP program:
    REPORT QCJPERFO.
    FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA: PAGNUM LIKE SY-TABIX, "page number
    NEXTPAGE LIKE SY-TABIX. "number of next page
    READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
    CHECK SY-SUBRC = 0.
    PAGNUM = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
    CHECK SY-SUBRC = 0.
    NEXTPAGE = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
    CHECK SY-SUBRC = 0.
    IF PAGNUM = 1.
    OUT_PAR-VALUE = u2018|u2019. "First page
    ELSE.
    OUT_PAR-VALUE = u2018||u2019. "Next page
    ENDIF.
    IF NEXTPAGE = 0.
    OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
    ENDIF.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    Best regards,
    raam

  • How to add an item into the Newsstand

    How to add an item into the Newsstand.  Please do NOT reply using  "tech-language." Use standard- normal everyday English. Thanks,
    Don Otlin
    Franklin Square, NY

    Open Newsstand. Tap on the "Store" button in the upper right. Any newspaper or magazine you download from the store will appear in Newsstand.

  • How to add PDF files into a slides? (Flash 8)

    I am new to flash and I am using Macromedia Flash 8. My task is simple enough: I need create a Presentation with Screens from PDF files: I have 10-12 PDF files which I want convert into flash presentation.
    I have read this tutorial:
    http://w3.id.tue.nl/fileadmin/id/objects/E-Atelier/Phidgets/Software/Flash/fl8_tutorials.p df
    Chapter 11: Basic Tasks: Create a Presentation with Screens.
    I'm having trouble how to add PDF files into a slides: I want insert a whole pdf file as separate slide, without splitting pdf file into separate elements: pictures, text, etc. I tried import pdf file into Flash, wheen import there is shown prompt how program should process this pdf file(add in stage, library, as keyframes, etc) , not clear which option is correct for my task. What I got is pdf file splitted into multiple images, text, - which is not what I want. I want keep PDF files without changes, preserve original design and formatting, just convert this pdf into flash, so presentation will consist of PDFs organized in correct order, then add navigation buttons and some effects. How to solve this task?

    Just to avoid potential confusion... PDF is an Adobe format, but Flash 8 is/was not.  Flash 8 came out before Adobe bought Macromedia.  Even today, I don't believe anything has been done to accomodate direct integration of PDF content in Flash.

  • Asset related question - How to add a record into table ANLC?

    Hello experts,
    Could anyone tell me how to add a record into table ANLC?
    Thanks very much!
    Christina.

    how you want add?
    you want add direct in table???.
    Normally if yo post any transaction this table will update.
    ex;acquisition;
    chandra

  • How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

    Hi Experts,
    How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
    I have no idea how to start with, please give some advice.
    Thanks!
    Ice

    Dear Ice,
    Use Append structure, see given link:
    https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
    Regards,
    Abbas.

  • Business system into xml format

    Hi all,
               Can u please explain hoe to convert business system into xml format.
    Thanks in advance
    Naveen

    Hey
    you dont convert business system name in XML format,
    do you want to use ur business system name in message mapping?if yes,then use the following UDF code to get BS name in message mapping
    String Sender = "";
    String key = "SenderService";
    // get runtime constant map
    map = container.getTransformationParameters();
    // get value of header field by using variable key
    Sender = (String) map.get(key);
    return Sender;
    Note: the above code is from the following thread
    Fetching the business system name during graphical mapping
    Thanx
    Ahmad
    Message was edited by:
            Ahmad

  • How to add these system in the system ID list?

    Hello:
        Now I have a another problem in Setting Up Central Auto-Reaction Methods.I have created in solution manager,  In the system ID list,I want to have development system ,production system,and other system,because I want to alert these system,but I don't know how to add these system in the system ID list?Dose it need RFC?
        Please someone tell me.
         lexian
         Thanks a lot!

    Lexian,
    You need to some of these things for the SAP systems to show up in Solution Manager
    1. Install the Monitoring Agents (SAPCCM4X for ABAP instance and SAPCCMSR for J2EE instance etc)
    2. Configure RFCs from Solution Manager to the Satellite (SAP) systems.
    3. Create CSMREG user.
    4. Create Monitoring jobs.
    These are just some of the things that you will have to do. Refer this link on how to do this
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm.
    This is for the broader view of the entire thing
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm
    I would suggest starting with the second link.
    Let us know if you have any questions
    Kunal

  • How to add managed system in Wily introscope system

    Hi All,
    Can anyone provide the document on how to add managed system in Wily Introscope?
    With Regards
    Ashutosh

    Hello,
    The documentation for WilyIntroscope is located at
    http://service.sap.com/diagnostics
    > Media Library
    Here you can find user guides and installation guides for WilyIntroscope.
    But the overview is you install Enterprise Manager on a server that becomes the EM Server and then IS Agents on the managed system. There is an installation guide for EM and this ISAGENT setup is part of managed system setup in Solman_setup.
    Your tools to manage are Webview and Workstation, and there is documentation for these at the above mentioned link as well.
    Regards,
    Paul

  • How to add coordinate system SVY21(SRID: 3414) to Oracle Spatial 11g/12c

    Can any one please help me for "How to add coordinate system SVY21(SRID: 3414, for Singapore) to Oracle Spatial 11g/12c'?

    Why don't you start with the documentation: Coordinate Systems (Spatial Reference Systems)
    Especially paragraph 6.9 (6.9 Creating a User-Defined Coordinate Reference System ) should be helpful for you.
    HTH,
    Stefan

Maybe you are looking for