How to add button delay in menu?

I have a video as part of the menu. It runs for 10 seconds then freezes. I don't want the menu buttons to appear until 9 seconds into the video then stay visible anc active with the frozen frame. Is this possible?
I am running DVD Studio Pro 3.0.2
Thanks in advance!

Set the duration to 10 seconds in the inspector then the loop point to 9
Make sure to make the highlights outside of DVD SP (Photoshop overlay made to pict or tiff) and use that for highlights/buttons
This shows the steps to make an overlay and apply it, the items in the graphics will not show until lopp point
http://discussions.apple.com/thread.jspa?messageID=7781380&#7781380

Similar Messages

How to add a drop-down menu to a rollover image?

Hi,
I guess my title says it all... I was wondering how to add a drop-down menu to a rollover image? I know that there's the sprymenu, but I need to have my own rollover images.
Thanks,
Kazem

Frankly, ANY link can offer a drop down.
Take a look at this turorial.
That will get you your dropdown menu. So you have that.
Now, on your top menu (or any level where you want to have an image instead of text do this:
(I am copying the HTML structure in the tutorial here):
<nav>
          <ul>
                    <li><a href="#">Home</a></li>
                    <li><a href="#">Tutorials</a>
                              <ul>
                                        <li><a href="#">Photoshop</a></li>
                                        <li><a href="#">Illustrator</a></li>
                                        <li><a href="#">Web Design</a></li>
                              </ul>
                    </li>
                    <li><a href="#">Articles</a>
                              <ul>
                                        <li><a href="#">Web Design</a></li>
                                        <li><a href="#">User Experience</a></li>
                              </ul>
                    </li>
                    <li><a href="#">Inspiration</a></li>
          </ul>
</nav>
Now, let's pretend you want an image instead of the word "Articles." You'll want the image to be sized appropriately, and if you look at the CSS, you'll see it's 112 pixels wide by 52 high. If your image is approximately those dimensions, you're all set.
So instead of "articles" you insert your image.
Done.

Urgent - How to add buttons to a Table

How to add buttons to a Table and enable them for Mouse Listeners/ Action Listeners

extends the defaultcellrenderer make it return a Jbutton as the component to draw.
class OverCellRendererClass extends DefaultTableCellRenderer {
public Component getTableCellRendererComponent(JTable table,
Object value,
boolean isSelected,
boolean hasFocus,
int row,
int column) {
//put your stuff here to make or get a button
return myButton;
Use something like this to set the renderer for the column :
tb.getColumnModel().getColumn(4).setCellRenderer(new YourCellRendererClass());

How to add a delay step

Hi,
we have come across a issue in work flow. And we have very little idea on work flow.
Can any one please let me know how to add a delay step behind existing step X.
Also let me know how to do below options to perform this operation like
1. Like in ABAP delay for few seconds
2. Or simply making use of desired start time logic.
Thanks in advance.
PRaneeth

Delay?
You mean that you want to stop the execution of the workflow for a specific period, right?
Like in ABAP delay for few seconds
This can be handled by using a WAIT STEP of the workflow, I meanthe use of this wait step is , in brief, if at all you want to stop the execution of the workflow until a specific Event is raisedthe workflow execution stops and as soon as the specified event is raised then the remaining part of the workflow is executed.

How to add button in standard SAP transaction

Hi All,
I would like to know how to add a button in the application toolbar of the standard SAP transaction CO01/CO02. Is there a screen exit for this?
Hope you can help. Thanks
Regards,
April

Check Enhancment CCOWB001. If not then u can search the below list, all of which are called from the T-code.
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

How to add button on application tool bar of standard transaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

HI
SHD0 is used to create and maintain Screen and Transaction Variants..
to know more about Screen and trransaction variants click on this link
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).

How to add button in ALV report (Class method )?

Hello experts,
I have developed one ALV report using classes.
I want to add one more button on the report like already is there named DISPLQUA
How ca i do that here?
Following the code of CLASS definition & implimentation
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
    METHODS:
      handle_on_user_command FOR EVENT added_function OF cl_salv_events
        IMPORTING e_salv_function.
ENDCLASS.                    "lcl_handle_events DEFINITION
      CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
METHOD handle_on_user_command.
    CASE e_salv_function.
      WHEN 'DISPLQUA'.
        PERFORM show_quant_record.
     WHEN 'DISPQM03'.                                " Here i want to add button
       PERFORM display_quality_notification.
      WHEN OTHERS.
    ENDCASE.
ENDMETHOD.                    "handle_on_user_command
ENDCLASS.                    "lcl_handle_events IMPLEMENTATION

HI Ronny.
Code snippet for reference.
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION.
    METHODS :
*--Toolbar control
      HANDLE_TOOLBAR FOR EVENT TOOLBAR
        OF CL_GUI_ALV_GRID IMPORTING E_OBJECT
                                     E_INTERACTIVE,
ENDCLASS
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*--handle toolbar
METHOD HANDLE_TOOLBAR.
* append a separator to normal toolbar
    CLEAR G_TOOLBAR.
    G_TOOLBAR-BUTN_TYPE = 3.
    APPEND G_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
    CLEAR G_TOOLBAR.
    G_TOOLBAR-FUNCTION = 'SAVE'.
    G_TOOLBAR-ICON = ICON_SYSTEM_SAVE.
    G_TOOLBAR-BUTN_TYPE = 0.
    G_TOOLBAR-QUICKINFO = 'Save the Customer'(203).
    APPEND G_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
ENDMETHOD.                    "HANDLE_TOOLBAR
Hope this helps.
Gary.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 7, 2008 5:41 PM

How to add button in reuse_alv not in gui status

hi guys,
my question how can i add button to reuse_alv not in gui_status or pf_status ? and also i have an internal table which contains a checkbox field when user select one or more check box and push button , new table will be sended to batch input program.how can i do add button part, the rest of it is done.?

Hi,The following sample report ZUS_SDN_ALV_BUTTON_CLICK_LTXT shows a possible way how to handle the BUTTON_CLICK event in order to retrieve a longtext for a ALV entry. Please note that for the sake of simplicity I have choosen an obsolete function module for text editing (only enter numerical values otherwise the function module crashes).
*& Report ZUS_SDN_ALV_BUTTON_CLICK_LTXT
*& Screen '0100' contains no elements.
*& ok_code -> assigned to GD_OKCODE
*& Flow logic:
    * PROCESS BEFORE OUTPUT.
    * MODULE STATUS_0100.
    * PROCESS AFTER INPUT.
    * MODULE USER_COMMAND_0100.
*& PURPOSE: Demonstrate event BUTTON_CLICK for entering long text
REPORT zus_sdn_alv_button_click_ltxt.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_outtab.
INCLUDE TYPE knb1.
TYPES: button TYPE iconname.
TYPES: line TYPE bapi_line.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
WITH DEFAULT KEY.
DATA:
gd_okcode TYPE ui_func,
gd_repid TYPE syst-repid,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid TYPE REF TO cl_gui_alv_grid,
gt_fcat TYPE lvc_t_fcat,
gt_variant TYPE disvariant,
gs_layout TYPE lvc_s_layo.
DATA:
gs_outtab TYPE ty_s_outtab,
gt_outtab TYPE ty_t_outtab.
    * CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_button_click FOR EVENT button_click OF cl_gui_alv_grid
IMPORTING
es_col_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
    * CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_button_click.
    * define local data
DATA:
ld_answer(1) TYPE c,
ls_outtab TYPE ty_s_outtab.
CHECK ( sender = go_grid ).
READ TABLE gt_outtab INTO ls_outtab INDEX es_row_no-row_id.
" Note: This function module is obsolete and crashes if
" non-numerical values are entered. Choose a more
" appropriate way of entering the longtext.
CALL FUNCTION 'POPUP_TO_GET_VALUE'
EXPORTING
fieldname = 'LINE'
tabname = 'BAPITGB'
titel = 'Enter Longtext'
valuein = ls_outtab-line
IMPORTING
answer = ld_answer
valueout = ls_outtab-line
EXCEPTIONS
fieldname_not_found = 1
OTHERS = 2.
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF ( ld_answer NE 'C' ). " 'C' = cancel
MODIFY gt_outtab FROM ls_outtab INDEX es_row_no-row_id
TRANSPORTING line.
ENDIF.
    * Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'REFRESH' ).
ENDMETHOD. "handle_button_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1
INTO CORRESPONDING FIELDS OF TABLE gt_outtab
WHERE bukrs = '1000'.
CLEAR: gs_outtab.
gs_outtab-button = icon_change_text.
MODIFY gt_outtab FROM gs_outtab
TRANSPORTING button LINE
where ( bukrs NE space ). " modify all lines
PERFORM build_fieldcatalog.
    * Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
    * Create ALV grids
CREATE OBJECT go_grid
EXPORTING
i_parent = go_docking
EXCEPTIONS
OTHERS = 5.
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
    * Set event handler
SET HANDLER: lcl_eventhandler=>handle_button_click FOR go_grid.
    * Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
is_layout = gs_layout
CHANGING
it_outtab = gt_outtab
it_fieldcatalog = gt_fcat
EXCEPTIONS
OTHERS = 4.
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
    * Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
EXPORTING
repid = gd_repid
dynnr = '0100'
    * CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
    * NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
    * Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
    * MODULE STATUS_0100.
*PROCESS AFTER INPUT.
    * MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
    * text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
    * SET TITLEBAR 'xxx'.
CALL METHOD go_grid->refresh_table_display
    * EXPORTING
    * IS_STABLE =
    * I_SOFT_REFRESH =
    * EXCEPTIONS
    * FINISHED = 1
    * others = 2
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
    * text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
    * Refresh -> pass PAI and PBO where flushing occurs
WHEN 'REFRESH'.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form BUILD_FIELDCATALOG
    * text
    * --> p1 text
    * <-- p2 text
FORM build_fieldcatalog .
    * define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
lt_fcat TYPE lvc_t_fcat.
REFRESH: gt_fcat.
CLEAR: lt_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'KNB1'
CHANGING
ct_fieldcat = lt_fcat
EXCEPTIONS
OTHERS = 99.
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
APPEND LINES OF lt_fcat TO gt_fcat.
CLEAR: lt_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'BAPITGB'
CHANGING
ct_fieldcat = lt_fcat
EXCEPTIONS
OTHERS = 99.
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_fcat INTO ls_fcat
WITH KEY fieldname = 'LINE'.
IF ( syst-subrc = 0 ).
INSERT ls_fcat INTO gt_fcat INDEX 4.
ENDIF.
CLEAR: lt_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ICON'
CHANGING
ct_fieldcat = lt_fcat
EXCEPTIONS
OTHERS = 99.
IF sy-subrc 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_fcat INTO ls_fcat
WITH KEY fieldname = 'NAME'.
IF ( syst-subrc = 0 ).
ls_fcat-fieldname = 'BUTTON'.
ls_fcat-style = cl_gui_alv_grid=>mc_style_button.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ENDIF.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG[/code]
Reward If Found Useful.

How to add button on application tool bar of standard transaction-URGENT

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

Hi,
Go through this thread.
Push Buttons on application toolbar.
Regards,
Vani.

How to add button on application tool bar of standardt ransaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
these are the avilable user Exits for the Tcode..C203
XCZD0004 Extend authority check for the material-recipe allocati
CMDI001 Determine explosion control for BOM
CPAU0001 Enhancement for Authorization Check in Task Lists
CPDO0001 Test units of measure for reference operation set
CPRE0001 Enhancement for Reorgnization Checks in Task Lists
Run this Program.. enter the Tcode. u'ii get teh BADI's exist for the Tcode
REPORT Z_FIND_BADI .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Please give me reward points...

How to add icons in native menu with text

Hello Guys
                 Can Anybody guides me how to add icon in nativemenu system tray.Actually i am making a simple application in adobe air and use minimizing the application into system tray.On Right click on the icon present in system tray it open naitive menu with open and exit option.
i just want to add an icon with each menuItem.Please guide how can i do it.please give me some example for it.i am using this
                                 http://www.swamicharan.com/blog/air/minimizing-an-air-app-to-systemtray/
link for dock and undock my application.And also tell me how to enhace the width of that naitive menu .please help me out.
Thanks And Regards
     Vineet Osho.

           the native menu means in ur application menu or flex system menu?

How to "Add" Button to upload file in Notification PG?

I have a question on Extending/Customizing notfn to have "Add" attachment button to upload a document (some stnd template that Our business has) on either NotifDetailsPG or /oracle/apps/fnd/wf/worklist/webui/MoreInfoPG when a Approver opens notification to APPROVE/Reject
I'm wondering why Oracle didn't provide this feature of Uploading a file (along with Response input text area that they provided already) in NotifDetailsPG?
Business Reason: Our Business wants to upload a doc when an approver Rejects the notification (our case: iExpense module filing Exp Report) telling employee to follow some protocals
Question on OAF:
Is it possible to extend NotifDetailsPG or MoreInfoPG to upload a file. So, that when it goes to requestor they can open this file back and read thru. I know we need to insert a record in fnd_documents and fnd_attached_documents and /or fnd_lobs...but i don't know how to retrieve it back....Any hints....
Thanks
Raghu Kulkarni

to clarify again....
In the WF notification during the time of "Reject"ion or "Approv"al, we want to upload a file and then perform Reject/Approve action. Can we extend the page to have Add button to upload file? Is that a lot of work?
Please any one give some suggestions...Thanks
Raghu Kulkarni

How to add to app Services menu?

Hello all,
I'm trying to figure out how to add a "send to..." or somesuch menuItem to the Services menu in an application.
I've created Services in the Finder that I can run with a right-click, but I don't know the procedure -- if there is one -- for end users to add to the application Services menu.
My specific task is to open the current open window/document in Adobe Reader in Skim so I can fill in and edit there. None of my searches has uncovered how to go about doing this. Any helpful pointers or information gratefully accepted.
Thanks,
Markie

Hi,
In the dashboard --> edit option u can see dashboard object here u can see folder ...by this folder u just include dashboard page other wise in the catalog share folder u need create each and evry module pre planned folder then save it each dashboard pages to relevent module folder.
THanks
Deva

How to add script icon to menu bar?

On my MacBook Pro that was upgrated to Mountain Lion the script menu I installed years earlier remained after the upgrade. Just bought a new iMac and I can't find how to get the script icon in the menu bar. In Leopard, and maybe Snow Leopard, there was acutally a script to install the menu. The scripts I use work fine under Mountain Lion, I just want to add them to the menu bar. Any thoughts would be greatly appreciated.

Open the applescript editor.app
Preferences>show icon in menu bar

How to add button to Table View and initiate action?

hello,
i'm new to Javafx 2, i recently followed the tutorial on tableview and would like to add a deletion action on particular row. What i had in mind was to add a delete button on the last column of each row, when clicked it will fire a handler and remove that row from the data observablelist. how do i do that?
please advice,
wesley

Hi,
Please find the below code. I am creating a table view with two columns. The second column consists of delete button.
TableVeiw table = new TableView();
/*First column*/
final TableColumn<String> titleCol = new TableColumn<String>("Title");
titleCol.setProperty("title");
/*Second column*/
TableColumn<String> actionCol = new TableColumn<String>("Action");
actionCol.setCellFactory(new Callback<TableColumn<String>, TableCell<String>>() {
      @Override
      public TableCell<String> call(TableColumn<String> param) {
             final TableCell<String> cell = new TableCell<String>() {
                      @Override
                      public void updateItem(String value, boolean empty) {
                            super.updateItem(value, empty);
                            final VBox vbox = new VBox(5);
                            Image image = new Image(getClass().getResourceAsStream("/images/delete.png"));
                            Button button = new Button("", new ImageView(image));
                            button.getStyleClass().add("deleteButton");
                            final TableCell<String> c = this;
                            button.setOnAction(new EventHandler<ActionEvent>() {
                                  @Override
                                  public void handle(ActionEvent event) {
                                          TableRow tableRow = c.getTableRow();
                                          Item item= (Item) tableRow.getTableView().getItems().get(tableRow.getIndex());
                                          /* TODO : Delete this item from your data list and refresh the table */
                      vbox.getChildren().add(button);
                      setGraphic(vbox);
        cell.setAlignment(Pos.TOP_RIGHT);
        return cell;
grid.addColumns(titleCol,actionCol);I hope this can help you. :)
Edited by: Sai Pradeep Dandem on Aug 18, 2011 10:04 PM

How to add button delay in menu?

Similar Messages

Maybe you are looking for