How to Add button in Application Toolbar for Fb01(screen) Transaction
Hi All,
I need to Add a customized Button at Application toolbar for FB01 Tcode for standard screen.
I am unaware of this,please take it as an urgent issue and help me with your inputs.
Points will be given.
Thanks,
Ramesh
On which screen (in which standard status ?) to do what ?
You could try to bypass sscr key requirement using some BAdI like FI_HEADER_SUB_1300 to add a button to screen or identifying an implicit enhancement option in one PBO module/form to change PF-STATUS, then look for such an option in PAI module/forms.
Regards,
Raymond
Similar Messages
-
How to add button on application tool bar of standard transaction-URGENT
Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
VijayHi,
Go through this thread.
Push Buttons on application toolbar.
Regards,
Vani. -
How to add button on application tool bar of standard transaction
Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
VijayHI
SHD0 is used to create and maintain Screen and Transaction Variants..
to know more about Screen and trransaction variants click on this link
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions). -
How to add a custom button on Application Toolbar for ME21N, ME22N & ME23N
Hi Experts,
I am new to this forum. I hope someone will help me.
My Requirement is as :
I want to add a new custom button on Application Toolbar for ME21N, ME22N & ME23N.
There are already standard buttons in this toolbar which is Document Overview On, Hold, Personal Settings etc.
So after the 'personal settings' button i want add a new button and want to write a code which will open one custom screen.
I am not able to find any exit for this....
Please help...
Thanks....Hey Buddies
Try below BADI : ME_PROCESS_PO_CUST
and check with required methods.
1)PROCESS_ITEM
2)CHECK
3)POST
Regards,
Pranav -
How to add buttons in Main toolbar in SAP EHSM?
Hi All,
We have a requirement where we need to add button to main toolbar in incident creation in SAP EHSM.
Comp. Configuaration : EHHSS_INC_REC_OIF_V3
In the above picture, we want to add custom button "Submit". But when i add new button in comp. configuartaion, my application stops responding and i get time out error.
Please suggest,how to move forward.
Thanks,
VimalHi Vimal,
If we have to add a new button to a toolbar, please right click on the toolbar and get the technical details like the component name, application name , etc. & and based on the information goto the required configuration in the workbench and add the button at component level or at FPM config.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a2b7c2-1598-2e10-45bc-c556df3b9576?QuickLink=index&…
Above link is guide to help you for the same,
Regards,
Harsha -
Want o add button to application toolbar of CO12
Hi,
I want to add one button to application tool bar of CO12 transaction.
Let me know the procedure to achieve the same
Thanks in advance,
NagHi,
Any alternative would also do.
Please help
Thanks,
Nag -
How to make buttons in application toolbar enable and disable
Hi ,
I have to shaow the buttons in application toolbar enable or disable dynamically , pls helpCheck syntax of SET PF-STATUS status EXCLUDING fcode in online help...
Regards,
Raymond -
How to add button on application tool bar of standardt ransaction
Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijayhttp://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
these are the avilable user Exits for the Tcode..C203
XCZD0004 Extend authority check for the material-recipe allocati
CMDI001 Determine explosion control for BOM
CPAU0001 Enhancement for Authorization Check in Task Lists
CPDO0001 Test units of measure for reference operation set
CPRE0001 Enhancement for Reorgnization Checks in Task Lists
Run this Program.. enter the Tcode. u'ii get teh BADI's exist for the Tcode
REPORT Z_FIND_BADI .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Please give me reward points... -
How to create button in application toolbar in sap standard tcode va03
Hi Gurus,
I want to create a button in the application tool bar of a sap standard tcode : va03.
Can some one help me with this..!
Best Regards,
Navin Fernandes.
Edited by: NAVIN FERNANDES on Aug 12, 2010 10:02 AM
Edited by: NAVIN FERNANDES on Aug 12, 2010 10:07 AMGo to the coresponding PF status and edit using modification assistant.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
Regards,
Nikhil -
Application toolbar of selection screen
Hi,
I'd like to add SEPARATOR (not button) to application toolbar of selection screen. Is it possible?
Thanks
RadoslawHi Kltys,
Check the following sample programs:
Selection Screen :
demo_sel_screen_with_subscreen.
demo_sel_screen_as_subscreen.
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
DEMO_SEL_SCREEN_PUSHBUTTON
D_ANALYSEREPORT_EABP_BUTTONS
Reward Points if this helps.
Manish
Message was edited by: Manish Kumar -
How to deactive a button in application toolbar
how to deactive a button in application toolbar?
Simple example
This example shows how to create a toolbar with a single Exit button, used to exit the program.
Steps:
Create a screen and add a custom container named TOOLBAR_CONTAINER
Code:
REPORT sapmz_hf_toolbar .
TYPE-POOLS: icon.
CLASS cls_event_handler DEFINITION DEFERRED.
G L O B A L D A T A
DATA:
ok_code LIKE sy-ucomm,
Reference for conatiner
go_toolbar_container TYPE REF TO cl_gui_custom_container,
Reference for SAP Toolbar
go_toolbar TYPE REF TO cl_gui_toolbar,
Event handler
go_event_handler TYPE REF TO cls_event_handler.
G L O B A L T A B L E S
DATA:
Table for registration of events. Note that a TYPE REF
to cls_event_handler must be created before you can
reference types cntl_simple_events and cntl_simple_event.
gi_events TYPE cntl_simple_events,
Workspace for table gi_events
g_event TYPE cntl_simple_event.
CLASS cls_event_handler DEFINITION
CLASS cls_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
on_function_selected
FOR EVENT function_selected OF cl_gui_toolbar
IMPORTING fcode,
on_dropdown_clicked
FOR EVENT dropdown_clicked OF cl_gui_toolbar
IMPORTING fcode posx posy.
ENDCLASS.
CLASS cls_event_handler IMPLEMENTATION
CLASS cls_event_handler IMPLEMENTATION.
METHOD on_function_selected.
CASE fcode.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
METHOD on_dropdown_clicked.
Not implented yet
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
IF go_toolbar_container IS INITIAL.
Create container
CREATE OBJECT go_toolbar_container
EXPORTING
container_name = 'TOOLBAR_CONTAINER'.
Create toolbar
CREATE OBJECT go_toolbar
EXPORTING
parent = go_toolbar_container.
Add a button
CALL METHOD go_toolbar->add_button
EXPORTING fcode = 'EXIT' "Function Code
icon = icon_system_end "ICON name
is_disabled = ' ' "Disabled = X
butn_type = cntb_btype_button "Type of button
text = 'Exit' "Text on button
quickinfo = 'Exit program' "Quick info
is_checked = ' '. "Button selected
Create event table. The event ID must be found in the
documentation of the specific control
CLEAR g_event.
REFRESH gi_events.
g_event-eventid = go_toolbar->m_id_function_selected.
g_event-appl_event = 'X'. "This is an application event
APPEND g_event TO gi_events.
g_event-eventid = go_toolbar->m_id_dropdown_clicked.
g_event-appl_event = 'X'.
APPEND g_event TO gi_events.
Use the events table to register events for the control
CALL METHOD go_toolbar->set_registered_events
EXPORTING
events = gi_events.
Create event handlers
CREATE OBJECT go_event_handler.
SET HANDLER go_event_handler->on_function_selected
FOR go_toolbar.
SET HANDLER go_event_handler->on_dropdown_clicked
FOR go_toolbar.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
http://www.erpgenie.com/abap/controls/toolbar.htm#Simple%20example
http://help.sap.com/saphelp_nw04/helpdata/EN/42/d2ab343e416635e10000000a1553f6/content.htm
help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCITOOLBAR/BCCITOOLBAR.pdf
Regards,
Jagadish -
Displaying a Push button in the application toolbar for an ALV report
Hello everyone,
Query:
Is it possible to display a custom push button in the application tool bar while displaying an ALV report(1st one)?
On pressing this custom push button will I be able to display another ALV report(2nd one) based on the selection made on the current ALV report(1st one)?Yes u can have pushbutton on application toolbar.
You just have to use the new pf status in your report program.
You should copy the 'STANDARD' GUI status from program SAPLKKBL using transaction SE90 >Programming SubObjects> Gui Status.
Execute this transaction to get to next screen. select status using checkbox. click on GUI Status --> Copy.
Enter your Z program name and the name you what for this status - you can keep it as 'STANDARD' to be simple.
Then you can edit the new status to add or delete buttons. This will also bring in the standard SAP ALV functionality.
Have a look at below code for using the new status.
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
i_structure_name = 'QMEL'
TABLES
t_outtab = i_qmel
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'TEST'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
WHEN 'BUTTON'. "Double Click line Item
**Write ur functinality here
endcase.
endform.
Also have a look at below links.
http://www.sap-basis-abap.com/abap/add-button-to-alv-toolbar-with-reuse-alv-list-display.htm
ALV report
Best Regards,
Vibha
*Please mark all the helpful answers -
How to disable the button in application toolbar in report pgm
Can anyone help with How to disable the button in application toolbar in report pgm
Hi,
You can use it_excluding to disable button on the tool bar.You have to find the function code for the required button and append that function code to the it_excluding .The optional IMPORTING parameter IT_EXCLUDING is an internal table. It is only needed if the caller uses the list tool standard interface but wants to deactivate interface functions which he or she does not need.You can have your defined pf-status using I_CALLBACK_PF_STATUS_SET.
SAMPLE PROGRAM
tables spfli.
type-pools: slis.
DATA W_FCODE TYPE SLIS_EXTAB-FCODE.
data: t_spfli TYPE SPFLI OCCURS 0 WITH HEADER LINE.
select * from spfli into table t_spfli.
data : t_excluding TYPE SLIS_T_EXTAB .
W_fcode = '&OUP'.
append w_fcode to t_excluding.
W_fcode = '&ODN'.
append w_fcode to t_excluding.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SPFLI'
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING = T_EXCLUDING
tables
t_outtab = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
http://help.sap.com/saphelp_nw2004s/helpdata/en/99/49b844d61911d2b469006094192fe3/frameset.htm
Regards,
Priyanka. -
How do I add buttons to the toolbar in Reader?
En Adobe Reader, ¿Como puedo agregar botones a la barra de herramientas? Ya que pierdo mucho tiempo utilizando el botón derecho del mause y buscar los botones en las ventanas emergentes.
Muchas graciasHi richarddaniel1111,
To add buttons to the toolbar, do this:
Choose View > Show/Hide > Toolbar items.
Choose an option from the submenu (File, Edit, Comment, and so on).
Choose the tool that you want to add to the toolbar.
Hope that helps!
Best,
Sara -
Adding Button on application toolbar on ABAP List display screen....
Hello Gurus,
I copied SAP program 'RFBUEB00' into custom program. When I execute the custom report, I see the data lijne by line in ABAP list. I see a deafult 'Select' button on application toolbar.
If I want to add additional custom button on application toolbar on ABAP list display screen, how can I do it ? Please help.
Regards,
Jainam.
Edited by: Jainam Shah on Oct 27, 2009 5:44 PM>
Jainam Shah wrote:
> In my case it just rights the data in ABAP screen as follows. I can't use ALV grid and stuff because its on older version.
>
>
FORM LISTE_SCHREIBEN.
>
> check = '@T9@'.
>
> FORMAT COLOR COL_KEY INTENSIFIED OFF.
> WRITE: / SY-VLINE,
> check,
> BKPF-BUKRS,
> BKPF-BELNR,
> BKPF-GJAHR.
> FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
> WRITE: BKPF-BLART,
> (8) BKPF-BLDAT DD/MM/YY,
> (8) BKPF-BUDAT DD/MM/YY,
> BKPF-WAERS,
> BKPF-XBLNR,
> 80 SY-VLINE.
> XAUSGABE = 'X'.
> HIDE: BKPF-BUKRS, BKPF-BELNR, BKPF-GJAHR, BKPF-BSTAT, XAUSGABE.
> IF BKPF-BKTXT NE SPACE.
> FORMAT COLOR COL_KEY INTENSIFIED OFF.
> WRITE: / SY-VLINE, CHAR4 UNDER BKPF-GJAHR.
> FORMAT COLOR COL_NORMAL INTENSIFIED.
> WRITE: BKPF-BKTXT UNDER BKPF-BLART,
> 80 SY-VLINE.
> HIDE: BKPF-BUKRS, BKPF-BELNR, BKPF-GJAHR, BKPF-BSTAT, XAUSGABE.
> ENDIF.
> ENDFORM.
>
>
> I have to select multiple lines and proces them. For one line I know I can use AT-LINE-SELECTION but this is multiple lines...
What is your SAP system version?
It seems to be displayed only in ALV. Well, if you can make it to display in LIST ... you can go with set pf-status.
good luck
Maybe you are looking for
-
Error while creation of waste approval in waste management in EH&S
hi all, while creating waste approval i got some error message when i am using the process status as released. The error message is 'Release status cannot be assigned to the waste approval 0000000010' or tell me how to create a waste approval. thanks
-
Can I delete Adobe Bridge?
I use InDesign CS 5.5. However, I use it ONLY for simple projects like creating a manual to be printed. I do not do anything fancy with it. Can I delete Adobe Bridge? I see this huge 178 GB application plus all of its support folders in my apps folde
-
DB Instance creation using DBCA Gives ERROR
Hi All, I am getting below error while creating a new DB instance using DBCA. Initially I thought it could be a problem of the oracle version. But I checked it is Oracle 10G server version 10.2.0.1. I got it re-installed 3 times, but still same issue
-
Looking for advice. I took photos of a danceline competition. My folder structure is the main folder for the high school, with child folders for each performance. This structure remains when I pull into lightroom. Is there a fast way to copy
-
Hi Adobe, I have to cancel as my year's student rate was up in December and it's now beyond my budget to continue. I've tried since before Christmas to cancel online and by phone but couldn't, no one to service the call. January payment has just gone