How to add button on application tool bar of standard transaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

HI
SHD0 is used to create and maintain Screen and Transaction Variants..
to know more about Screen and trransaction variants click on this link
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).

Similar Messages

How to add button on application tool bar of standard transaction-URGENT

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

Hi,
Go through this thread.
Push Buttons on application toolbar.
Regards,
Vani.

How to add button on application tool bar of standardt ransaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
these are the avilable user Exits for the Tcode..C203
XCZD0004 Extend authority check for the material-recipe allocati
CMDI001 Determine explosion control for BOM
CPAU0001 Enhancement for Authorization Check in Task Lists
CPDO0001 Test units of measure for reference operation set
CPRE0001 Enhancement for Reorgnization Checks in Task Lists
Run this Program.. enter the Tcode. u'ii get teh BADI's exist for the Tcode
REPORT Z_FIND_BADI .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Please give me reward points...

How to add push button in application tool bar in SAP transaction VA01

How to add push button in application tool bar in SAP standard transaction VA01 and how to implement the code for that function code.

There is no scope to create a push button in application tool bar. Instead of that we can add in a menu bar.

How to hide button in application tool bar

Hi
There is a standard SAP report. after executing it,
There are 5 buttons in application tool bar .
I want to hide 3 of the buttons,
How can I hide them not by change program.
(Ex, can I use transaction variant).
Best Regards,

try to use transaction variant....
Edited by: shan palani on Dec 17, 2008 10:48 AM

How to Add button in Application Toolbar for Fb01(screen) Transaction

Hi All,
I need to Add a customized Button at Application toolbar for FB01 Tcode for standard screen.
I am unaware of this,please take it as an urgent issue and help me with your inputs.
Points will be given.
Thanks,
Ramesh

On which screen (in which standard status ?) to do what ?
You could try to bypass sscr key requirement using some BAdI like FI_HEADER_SUB_1300 to add a button to screen or identifying an implicit enhancement option in one PBO module/form to change PF-STATUS, then look for such an option in PAI module/forms.
Regards,
Raymond

How to create a new push button in application tool bar in GMGRANT thru BDT

Dear SAP Gurus -
We have a requirement in 'GMGRANT' transaction. We need to create a button in the application tool bar of 'GMGRANT' transaction. Once the button is activated, if the user clicks on the button then it will go to a new screen (external screen). User can input data in to the external sceeen and upon saving, the data will be stored in to a custom table and when user clicks on 'back ' button user should come back to the GMGRANT transaction.
Just wanted to know, how to create / activate a new button on application tool bar of GMGRANT transaction and what are the configuration and detail steps to achieve the same through BDT.
We went through a lot of documents on BDT but do not have a proper solution.
Could you please help.
Thanks in advance.
Regards,
Atul Mohanty

hi,
You can find user-exits (menu exits) to add new menu item.
But, there is no possibility to add new buttons on application tool bar.
Regards,
Sailaja.

Push buttons on application tool bar , should be changed based on radio but

Hi fndz,
i have 2 radio buttons on selection screen.
depend on the radio button i select , the push buttons on
application tool bar of basic list should be changed.
can u plz help me.
Thanks & Regards
kumar

Hii..
Parameters : r1 radiobutton group GRP1 ,
                    r2 radiobutton group GRP1 .
START-OF-SELECTION.
   CASE 'X'.
   WHEN R1.
     SET PF-STATUS 'S1'.
   WHEN R2.
     SET PF-STATUS 'S2'.
   ENDCASE.
Note: if you want to call the Same GUI Status (app toolbar), you can use the syntax
SET PF-STATUS 'S1' EXCLUDING <ITAB>
hope this solves ur issue.

Icon with push button on application tool bar

hi
how we place icon along with pushbutton on application tool bar on selecteion screen.
thanks in adv

Hi,
you can check the code below for test,
TYPE-POOLS icon.
TABLES sscrfields.
DATA functxt TYPE smp_dyntxt.
Parameters: test(1) TYPE C.
SELECTION-SCREEN: FUNCTION KEY 1.
INITIALIZATION.
functxt-icon_id   = ICON_GRAPHICS.
functxt-quickinfo = 'graphics'.
functxt-icon_text = 'Graphics'.
sscrfields-functxt_01 = functxt.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
    WHEN 'FC01'.
Message 'Button 1 pressed' TYPE 'I'.
    WHEN OTHERS.
ENDCASE.
START-OF-SELECTION.

Regarding list display + button on application tool bar

Hi guru's
I have a requirement like i need to select one particular record in the list display and prees on the button which is placed on the application tool bar.Then i should get one more screen where i can enter some details.
As per my knowledge it is possible only in grid display.
Kindly let me know if it is possible.
It would be great help if sample coding is provided.

Hi Ajay,
            You can do this in alv list display also.
Copy the standard gui status in ur program using tcode SE51->user interface>copy->target prog name.activate it
and add a button there.Use FM <b>'REUSE_ALV_EVENTS_GET'</b> to get user-command event.
sample code :
form Z8_EVENTCAT using    p_i_eventcat TYPE SLIS_T_EVENT.
DATA : L_EVENT TYPE SLIS_ALV_EVENT.
FOR GETTING ALL 17 EVENTS
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
IMPORTING
   ET_EVENTS             = P_I_EVENTCAT
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR L_EVENT.
READ TABLE P_I_EVENTCAT WITH KEY NAME = SLIS_EV_PF_STATUS_SET INTO L_EVENT.
IF SY-SUBRC = 0.
MOVE 'Z8_PF_STATUS' TO L_EVENT-FORM.
APPEND L_EVENT TO P_I_EVENTCAT.
ENDIF.
CLEAR L_EVENT.
READ TABLE P_I_EVENTCAT WITH KEY NAME = SLIS_EV_USER_COMMAND INTO L_EVENT.
IF SY-SUBRC = 0.
MOVE 'Z8_USER_COMMAND' TO L_EVENT-FORM.
APPEND L_EVENT TO P_I_EVENTCAT.
ENDIF.
form Z_MENU using p_extab type slis_t_extab.
SET PF-STATUS 'MENU_LIST'.
endform.                    " Z_MENU
form z8_user_command using p_ucomm type sy-ucomm
                           p_selfield type slis_selfield.
case p_ucomm.
WHEN '&IC1'.
call screen 100.
endcase
endform.
Reward points if helpful.
Regards,
Hemant

How to create button in application toolbar in sap standard tcode va03

Hi Gurus,
I want to create a button in the application tool bar of a sap standard tcode : va03.
Can some one help me with this..!
Best Regards,
Navin Fernandes.
Edited by: NAVIN FERNANDES on Aug 12, 2010 10:02 AM
Edited by: NAVIN FERNANDES on Aug 12, 2010 10:07 AM

Go to the coresponding PF status and edit using modification assistant.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
Regards,
Nikhil

How do i add buttons in the tool bar?

Hi,
I want to add buttons like "Load' in the tool bar.How do i do it? I am using LabView7.1
Please help me..
Regards
Meenatchi

Meenatchi wrote:
I am creating one dialog,in that i want to add menu bar and title bar.
See the attached VI, whose Window Appearance category is set to Top-level, from the VI Properties window.
From this, you can go ahead customizing the menu bar to your wish.
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
Top-level Application Window.vi ‏11 KB

Custom button in alv and disabling all buttons in application tool bar

Experts,
Could you please help me for the below requirements.
1). How to disable all the buttons (like sorting, print, find, set filter...etc.) in tool bar using oops?
2). Where can I add my custom download button in alv report using oops?
Thanks in advance...
Sridhar..

Step1:
Create on local class
Class <LCL_EVENT_RECEIVER> Definition
Define the below public methods.
Method Name     HANDLE_TOOLBAR
Event Name     TOOLBAR
Event Class     CL_GUI_ALV_GRID
Importing     E_OBJECT, E_INTERACTIVE
Method Name     HANDLE_USER_COMMAND
Event Name     USER_COMMAND
Event Class     CL_GUI_ALV_GRID
Importing     E_UCOMM
Class <LCL_EVENT_RECEIVER> Implementation
.     Method HANDLE_TOOLBAR
     Declare the structure <LS_TOOLBAR> of structure type STB_BUTTON
     Append the button information as given below into table E_OBJECT->MT_TOOLBAR to         display the custom button on ALV grid.
                           LS_TOOLBAR-FUNCTION = u2018DOWNu2019
                     LS_TOOLBAR-QUICKINFO = u2018downloadu2019
                     LS_TOOLBAR-TEXT = u2018downloadu2019
     Method HANDLE_USER_COMMAND
In this method if E_UCOMM = u2018DOWNu2019 write your logic.
Step2:
1.     To excluding the ALV grid buttons, fill the <LT_EXC> with function code CL_GUI_ALV_GRID=>MC_FC_EXCL_ALL
2.     To generate the ALV Grid, call the method SET_TABLE_FOR_FIRST_DISPLAY
Class     CL_GUI_ALV_GRID
Method Name     SET_TABLE_FOR_FIRST_DISPLAY
Exporting
I_STRUCTURE_NAME      ZDS_CM_EXT_SEL
LS_LAYOUT                    <LS_LAYOUT>
IT_TOOLBAR_EXCLUDING     <LT_EXC>
Changing
IT_OUTTAB                    <GT_EXT_SEL>
Create the Instance for class <LCL_EVENT_RECEIVER>
Class     <LCL_EVENT_RECEIVER>
Instance Name     <LO_EVENT_FNAME>
Now set handler <HANDLE_USER_COMMAND> and <HANDLE_TOOLBAR_FNAME> events using instance <LO_EVENT_FNAME>
Call method 'SET_TOOLBAR_INTERACTIVE' to raise event TOOLBAR
Class     CL_GUI_ALV_GRID
Instance Name     <GO_GRID>
Method Name     SET_TOOLBAR_INTERACTIVE

How to add custom authorization object to a SAP standard transaction

Hi All,
I have a standard tcode IW22 (change PM Notification) and I would lock changing when some users modify the field Functional Location (field TPLNR).
Since this field does not have an authorization object associated, I've tried to solve this problem with the following steps:
- tcode SU20 - creation of new authorization field TPLNR with data element TPLNR
- tcode SU21 - creation of a new auth object in transaction SU21 with name ZPM and field (TPLNR, ACTVT and TCOD)
- tcode SU24 - insert of new authorization field e check indicator (green)
- tcode SU22 - check indicator - check (green)
After this we have created a new role with PFCG and add transaction IW22; the new auth.ZPM was added manually.
We have try to analyze log (ST01 trace) but it seems no check was made in the trace file.
It seems new authorization object was not checked.
My question is: "Is it possible to add a custom authorization object into standard transaction and implementing authorization check without writing abap code in exit or badi ?"
Thanks
Maurizio

> My question is: "Is it possible to add a custom authorization object into standard transaction and implementing authorization check without writing abap code in exit or badi ?"
>
No .. not possible. The list of Auth. objects SAP proposed in SU24 for each Stnd. SAP TCodes are basically documentation of the Authority-Checks in the program for that TCode. The extra advantage of SU24 is to set the object status (means the proposal for availability in PFCG) among any of the four check indicators. So that we can provide our own value (customer specific values which are basically defined and separate from sap provided values) and reinforce the authorization concept of the organization.
So you need to provide a Authority-Check for ZPM in the program of IW22 to make sure that the fields you want to be checked are really being checked during execution of the tcode.
Regards,
Dipanjan

Want o add button to application toolbar of CO12

Hi,
I want to add one button to application tool bar of CO12 transaction.
Let me know the procedure to achieve the same
Thanks in advance,
Nag

Hi,
Any alternative would also do.
Please help
Thanks,
Nag

How to add button on application tool bar of standard transaction

Similar Messages

Maybe you are looking for