How to add certain pages in ESS/MSS?

How to add certain pages?
Suppose in ESS -> Appraisals
We have
My Appraisals
Under this we want to give a link which will display a pdf document (which is printable) for (say) 180 degree feed back.
How can I do that?
If
1)     the pdf is only printable?
2)     instead of the pdf there is a form and some table in the ECC system needs to be loaded with the data provided in the form?

Hi Basu,
If you want to add custom pages to the Standard ESS / MSS, you have to add the required custom page to the Standard Page which is located at <b>Portal Content -> Content Provided by SAP -> End User Content -> Employee Self-Service -> Roles -> Employee Self-Service</b>
And if you want to display a pdf file in a iView, you can upload that pdf into portal KM and you can create a document iView of that and finaly you can use that iView in your custom page.
Thanks,
Trikanth

Similar Messages

  • How to add certain pages?

    Suppose in ESS -> Appraisals
    We have
    a)My Appraisals
    Under this we want to give a link which will display a pdf document (which is printable) for (say) 180 degree feed back.
    How can I do that?
    If
    1)     the pdf is only printable?
    2)     instead of the pdf there is a form and some table in

    Hi Basu,
    If you want to add custom pages to the Standard ESS / MSS, you have to add the required custom page to the Standard Page which is located at <b>Portal Content -> Content Provided by SAP -> End User Content -> Employee Self-Service -> Roles -> Employee Self-Service</b>
    And if you want to display a pdf file in a iView, you can upload that pdf into portal KM and you can create a document iView of that and finaly you can use that iView in your custom page.
    Thanks,
    Trikanth

  • How to add addtitional pages in design view?

    How do I create additional pages in design view?  I have tried using NEW PAGE AFTER, but that doesnt add another page in design view, like I need. 
    I am creating a report that uses 8 subreports per page to dynamically create labels.  Currently I have a report header, and am using the page header to arrange the subreports so the top of each subreport prints on the top of each label.  The fields in the subreports can grow, and fill in the label from the top down. 
    I need to create a multiple pages using this format, but I dont know how to add more pages in design view.  Essentially I need subreports 1-8 on page 1, 9-16 on page 2, etc.  I would like to preserve the formatting I have created thus far, but I can always change it if I have to.

    In attempting to create the label sheets I needed, I ended up creating 14 separate reports (which report on 6 individual queries), because there are 14 pages worth of labels that need to be created.  What I wish to accomplish is to condense these 14 reports down to 6 reports.  One for each query.  What I absolutely cant find a way to do, is to get Crystal Reports to allow me to customize subreports on consecutive pages.  Again, I have 8 subreports on each page, which have been formatted to fit on 8 labels when printed.  Each subreport is identical in design, but has a different range selected (i.e. my driving value in each subreport has been modified with Select Expert to be between 1 and 5, or 6 and 10, or 11 and 15).  This is how I have been able to return 5 consecutive results on each label, with the next label returning the following 5 results. 
    My ultimate question:  Is it possible to create a multi-page report using this method?

  • How to add a page to newsletter template

    how to add a page to newsletter template

    Ich glaube du kannst auch Western Digital kaufen.
    Es gibt von hier:
    http://www.also.at
    http://www.ingrammicro.at
    http://www.littlebit.at
    http://www.techdata.at
    eBay
    http://www.amazon.co.uk/Elements-Capacity-Portable-Drive-Windows/dp/B00CRZ2PRM/r ef=sr_1_2?ie=UTF8&qid=1390342709&sr=8-2&keywords=western+digital+1tb
    Aber es macht nichts, etwas anderer Brand ist auch gut.
    Peter

  • How to add a page in the SAP Scripts

    Hi All,
    I want to know how to add a page in the sap scripts. there is already sap script developed by some other person.
    Now I have to add a page in front of that and have to add some more data.I added a page in page windows but thats not at all working.
    Please help me out in this.
    Thanks,
    Praveen

    new page will create in sap scripts using new page command.
    you have to set condition like after some number of records displayed in page new page has to be trigger.
    ex:YOU HAVE SO MANY RECORDS FOR PRINTING BUT YOU WANT TO DISPLAY 100 RECORDS IN FIRST PAGE REMAINING IN SECOND PAGE LIKE THAT.
    Here you can use NEW PAGE COMMAND .
    IT IS OPPOSITE PURPOSE OF PROTECT AND ENDPOTECT.
    Reward if useful.

  • How to add blank page to existing Document In Adobe Dc

    how to add blank page to existing Document In Adobe Dc Pro

    Hi thashrifs16749461,
    You can add a blank page using Adobe Acrobat DC by following the below instructions :-
    1) Open your existing pdf document in Acrobat DC.
    2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
    3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
    *Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
    In case if you experience any issue or have any query please let us know. We will be happy to help you.
    Regards,
    Aadesh

  • How to add Google Page Rank bar to Firefox

    How to add Google Page Rank bar to Firefox? With Chrome I can add an extension but how to do this with FireFox? Please give me the simplest and easiest solution.

    You can search the Add-ons site for Firefox extensions and see whether you find one with good reviews.
    https://addons.mozilla.org/firefox/

  • How to  run certain pages under SSL in tomcat 5.5

    hello..
    can anyone tell me how to run certain pages of my web application under ssl for eg the login page,credit card info page etc...
    I have enabled https://localhost:8080 in my tomcat creating a certificate keystore using
    C:\Program Files\Java\jdk1.5.0_06\bin\keytool.exe
    and my whole application is running under https..But due to performance measure the whole application can't run in https...So i want certain pages(sensetive) of my application to run in https and other in http..it will be so kind of you if anyone give me some idea regarding this...
    thanks

    A 503 response says
    503 Service Unavailable
    The server is currently unable to handle the request due to a
    temporary overloading or maintenance of the server
    You apparently have the server mis-configured. Recheck the configuration (or reinstall Tomcat per its instructions.)

  • How to add sub pages in iWeb templates

    Anybody knows how to add a sub pages in the templates? I want to add sub pages under the main header, e.g. "About Us."

    Just to say that you can do it in the way that Steve has already said and I did this on one of my sites and it worked really well.
    Lets take your example of About George. You create your page About George and you include this page in your navigation menu. Now lets suppose that you have more that you want to add about George with two other pages - George at Work and George at Play. You want to link to these pages from About George, but you don't want the page names visible. Well, you can do this by creating the pages and then going to Inspector. Click on pages and then check don't include in navigation menu. Then you can create links on the About George page to get to the other pages George at Work and George at Play - use shapes or text boxes to create these with something like Back and Next on those pages to take you forward to the next page and then back to the main page.
    I think you will need to create your own nav bar to be able to achieve this, as it means linking to different pages, but it does work well.

  • How to add web page in office button of ms office 2007 using c#?

    I want to add web page in office button in ms office 2007 using c#. How to add it? ribbon menu button should be in office button. when i click menu the web page should display in menu itself. tell me the solution.

    Hello,
    You can't place anything in the Ribbon UI (aka Fluent UI), only the predefined set of controls according to the Ribbon XML scheme. Read more about the Fluent UI in the following series of articles in MSDN:
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)
    Consider opening a web browser in a child window (separate) or using a task pane for that.

  • How To hide buttons in standard ESS /MSS applications .

    I have implemented standard ESS/MSS business package version mySAP2005 in ECC 6.0. Now in a standard iView buttons like Edit ,Previous ,etc are present . Now how can I hide these buttons ,say Edit button from iview level ?Now since this is Client Requirement .
    My main problem is I do not have adequate time to customize the standard applications through coding .Is there any other way to do it ?Thanks in advance for any solution provided quickly as goalive is near .

    Hi Ribhu,
    Open the iview in question and do a CTRL+right click.
    Hope this helps in serving your purpose.
    Points are welcome!
    Cheers,
    Sandeep Tudumu

  • How to get system timing in ESS/MSS

    HI All,
    i need to customize one of the ESS / MSS iviews......
    I have to get the system time and populate it into one of the fields of ESS.......
    aslo i have to disable the field so that the user would not be able to edit the time...
    how can i do it ?
    Please guide me on this..i am really getting now idea how to d it......
    regards,
    PK

    Hi Achim,
    thanks for your reply.
    Actually my requirement is that
    1). I have to just hide/disable some fields in the front end of ESS (ESS 50.4 which is ITS based) so that the user should not be able to edit those fields
    2). I have to catch the system time and show it in the ESS front end...i dont know how to get the system time...for this do i have to change the code of the ESS aplication....if yes then can u plz tell me how to do it
    Can you please give me any idea how to do these two things ?
    regards,
    PK

  • How can print Appraisal Document in ESS/MSS

    Dear Experts.
    We are using ESS/MSS with BP 1.41 and we are Working Appraisal Document with WD ABAP.
    I want know if is posible using funcionallity standard print the Appraisal Document in ESS/MSS?
    If the reponse is Yes, How can do this?
    Best Regards
    Carmen

    Note 1325807 You can find the Print Appraisal functionality
    Use this method for print appraisal:
    METHOD if_ex_hrhap00_link~show_link_get_url.
      DATA ls_parameter   TYPE ihttpnvp.
      DATA lt_parameters  TYPE tihttpnvp.
      ls_parameter-name  = 'plan_version'.
      ls_parameter-value = plan_version.
      APPEND ls_parameter TO lt_parameters.
      ls_parameter-name  = 'appraisal_id'.
      ls_parameter-value = s_appraisal_id-appraisal_id.
      APPEND ls_parameter TO lt_parameters.
    New parameter to use the FPM framework
      ls_parameter-name  = 'WDCONFIGURATIONID'.
      ls_parameter-value = 'HRPTPSSIADAP_PRINT_SELECTION_OIF'.
      APPEND ls_parameter TO lt_parameters.
    Generate the URL to be called.
      cl_wd_utilities=>construct_wd_url(
                EXPORTING application_name = 'hrptpssiadap_print_selection'
                            in_parameters    = lt_parameters
                  IMPORTING out_local_url    = url ).
    ENDMETHOD.
    Cheers
    Vijay

  • Absolute Beginner Question: How to add a page?

    Dumb question, I know, but I'm brand new. How do I add a page to the portal. In
    other words, how do I add a tab to the primary navigation and point it to a page
    template for loading page-specific portlets?

    Nevermind. My functionality was hidden in the EBusiness Control Center and I had
    to scroll right to see the required buttons. Found it.

  • I need to learn how to add a page at the end of my video to put credits?

    I am editing for the first time EVER and need to know how to add credits to the end of a video

    There are different ways to add credits. Did you have anything particular in mind?
    You may find some ideas here:
    How to Create Scrolling Movie Credits in Adobe Premiere Pro - YouTube
    https://helpx.adobe.com/premiere-pro/using/rolling-crawling-titles.html
    Creating and Editing Titles

Maybe you are looking for

  • Why do some of my text messages get received "from" my email address instead of contact name?

    WHen I send text messages, sometimes my email address appears in the receipients message box instead of my contact name.  This also results in multiple people sometimes receiving the message (those set up under my apple id)...any ideas?  I'm thinking

  • Alberto

    I am a novice in the java programing, somebody help my with a small problem? As I can configure the "driver" of connection with informix so that it takes to the letter � to me and the accents??? Perd�n por mi mal ingl�s.

  • Is it possible to run LabVIEW 7.1 and 8.5 under the same Windows installation?

    We have an older version of LabVIEW (7.1) which includes functionality for Event Notifications and the base version of LV8.3, which does not seem to contain this functionality.  Is it possible to run both of these from the same Windows Installation?

  • Pls answer following question and also explain it

    When creating a new payment group, which object must you configure to invoke the new payment group's pipeline? A. PaymentGroupManager B. PaymentManager C. validatePaymentGroup D. CommercePipelineManager

  • Keynote will not save presentations?

    I recently updated Keynote and my OS to Mavericks. I am now unable to save my Keynote presentations. I receive various errors when I try to do so. If I try to save as a Keynote file it tells me that it cannot autosave. If I try to export the file as