How to add certificate which to trust to E60 or to...

Hello,
I'm new with Nokia telephones and I have mostly used Sony-Ericcson so this is probably n00b question.
I need to add our exchange servers certificate to our phones so that our phones would trust the server but the problem is that there is instructions to go to certificate management and to add/save the sertificate there etc. but how?... there is no option to add or save or anything which would suggest that sertificates even could be added.
Second way was to open a webpage in this case it would be our OWA page and install the certificate by that way and again there is no way to save the certificate. Only to view and accept the certificate.
Am I totally lost/stupid or what? =)

Hello,
I don't have the answer to your question, but I've noticed this blog dealing with a related subject (installing certificates to be able to connect to gmail without "untrusted certificate" errors):
http://www.e-series.org/archives/46
Maybe this will help you find the solution? I know I did follow those instructions and was able to install the certificates, so it appears to be technically possible to install new certificates...

Similar Messages

How to add certificate in mac os x lion for all users

Hi hello
I want just add certificate in the session Admin, but i want when one user connect in her session can have this certificate
thanks for reply

It's already installed. To start it, run the following shell command:
sudo launchctl load -w /System/Library/LaunchDaemons/org.postgresql.postgres_alt.plist
There is a lot more that needs to be done to make it useful for anything, but that's beyond the scope of this forum.

How to add varchar which is in time format

Hello Team,
can you please help me for the below request?
I have two columns (start and End) which is in varchar type and value is in time format as below. now I wanted to do some addition/subtraction based on condition. while adding or subtracting, it should be considered as time. Thanks in advance.
if start>end then start-End
else end-start
end if
start                End
23:20:03            00:20:01
23:37:15            00:37:13
23:20:26            00:00:02
23:47:06            00:10:26
00:13:23            00:07:31
01:23:02            00:52:25

with
times as
(select '23:20:03' start_time,'00:20:01' end_time from dual union all
select '23:37:15','00:37:13' from dual union all
select '23:20:26','00:00:02' from dual union all
select '23:47:06','00:10:26' from dual union all
select '00:13:23','00:07:31' from dual union all
select '01:23:02','00:52:25' from dual
select start_time,end_time,
       to_char(trunc(sysdate) + case when to_date(start_time,'hh24:mi:ss') >= to_date(end_time,'hh24:mi:ss')
                                     then to_date(start_time,'hh24:mi:ss') - to_date(end_time,'hh24:mi:ss')
                                     else to_date(end_time,'hh24:mi:ss') - to_date(start_time,'hh24:mi:ss')
                                end,
               'hh24:mi:ss'
              ) diff
from times
START_TIME
END_TIME
DIFF
23:20:03
00:20:01
23:00:02
23:37:15
00:37:13
23:00:02
23:20:26
00:00:02
23:20:24
23:47:06
00:10:26
23:36:40
00:13:23
00:07:31
00:05:52
01:23:02
00:52:25
00:30:37
Regards
Etbin
Oops! Should have looked before posting.

SRM POWL - How to add/update longtext (internal note) of invoice

created powl for mass approval/rejection of invoice
For Rejection 'm adding 'reason for rejection' & 'internal note' fields
Which i need to update in invoice --> notes & attachment --> 'reason for rejection' & 'internal note'
I am doing it as --
TRY.
 CALL METHOD lo_pdo_notes->add_longtext
 EXPORTING
 iv_p_guid = i_guid
 iv_tdid = 'NOTE'
 iv_tdspras = sy-langu
 iv_tdformat = 'X'
 iv_text_preview = 'Internal Note'
 CHANGING
 co_message_handler = lr_message.
 CATCH /sapsrm/cx_pdo_abort .
 ENDTRY.
TRY.
 DATA text_id TYPE tdid VALUE 'RREJ'.
 CALL METHOD lo_pdo_notes->add_longtext
 EXPORTING
 iv_p_guid = i_guid
 iv_tdid = text_id
 iv_tdspras = sy-langu
 iv_tdformat = 'X'
 iv_text_preview = 'Price Difference' " drop down value
 CHANGING
 co_message_handler = lr_message.
 CATCH /sapsrm/cx_pdo_abort INTO lx_abort .
* mo_cll_message_handler->set_a1bort( io_pdo_abort_exception = lx_abort ).
 ENDTRY.
But message handler is returning Initial value - & 'm unable to update it in invoice...
Can you help ??

Thanks Pedro & Pradeep. I understand now how to add fields to SRM. Appreciate all your support. I have another question. I have to add fields to the following structures. Some structures have include structures and some does not. How to add fields which does not have include structures. Do I have to create my own Z include structure or any other way?
Table include structure
1) BBP_PDIGP CI_BBP_ITEM
2) BBP_PDHGP CI_BBP_HDV
3) BBP_PDHSB <NONE>
4) CRMD_ORDERADM_H INCL_EEW_ORDERADM_H
5) CRMD_ORDERADM_I INCL_EEW_ORDERADM_I
6) BUT000 INCL_EEW_BUT000
7) BBP_PDPSET <NONE>
8) ADDR3_DATA <NONE>
9) BBP_PDISS INCL_EEW_PD_ITEM_SSF
Look forward to hear from you.
Thanks,
GS

How to add a certificate to IIS global "Server Certificates" list using PowerShell?

Hi, been surfing the web for an example on how to add a certificate to the "global" IIS "Server Certificates" list using PowerShell but to no luck. I already have code in place on how to tie / associate a specific website with a specific cert but not how
to add the new .cer file using the "Complete Certificate Request..." wizard using PowerShell.... I dont expect the final code to become published but if someone had an idea on howto integrate / get an entry point on where to interact between the "Server Certificate"
list in IIS and POSH I would be super happy! :|
I am runnign IIS on a Windows 2008R2 x64 Standard Edition if that helps..... of course, I would saddle for an CLI if there is no other way, but POSH is of course the way to go! :)
Thanks for the help in advance guys, take care!
br4tt3

Hi and thanks for the suggestions!
Although it comes close, the suggested code example points on howto import / incorporate .pfx files - I am getting fed by .cer files which I need to add into the IIS console using POSH.
I tried explore the IIS.CertObj object but was not able to work out if this one could be used for importing / adding .cer files into IIS! However, launching the following command from a POSH console with Import-Module Webadministration already
loaded into that shell;
$certMgr = New-Object -ComObject IIS.CertObj returns the following error message:
New-Object : Cannot load COM type IIS.CertObj
From an IIS perspective I have the following components installed;
[X] Web Server (IIS)                                    Web-Server
    [X] Web Server                                      Web-WebServer
        [ ] Common HTTP Features                        Web-Common-Http
            [ ] Static Content                          Web-Static-Content
            [ ] Default Document                        Web-Default-Doc
            [ ] Directory Browsing                      Web-Dir-Browsing
            [ ] HTTP Errors                             Web-Http-Errors
            [ ] HTTP Redirection                        Web-Http-Redirect
            [ ] WebDAV Publishing                       Web-DAV-Publishing
        [X] Application Development                     Web-App-Dev
            [ ] ASP.NET
Web-Asp-Net
            [X] .NET Extensibility                      Web-Net-Ext
            [ ] ASP
Web-ASP
            [ ] CGI
Web-CGI
            [ ] ISAPI Extensions                        Web-ISAPI-Ext
            [ ] ISAPI Filters                           Web-ISAPI-Filter
            [ ] Server Side Includes                    Web-Includes
        [ ] Health and Diagnostics                      Web-Health
            [ ] HTTP Logging                            Web-Http-Logging
            [ ] Logging Tools                           Web-Log-Libraries
            [ ] Request Monitor                         Web-Request-Monitor
            [ ] Tracing
Web-Http-Tracing
            [ ] Custom Logging                          Web-Custom-Logging
            [ ] ODBC Logging                            Web-ODBC-Logging
        [X] Security
Web-Security
            [ ] Basic Authentication                    Web-Basic-Auth
            [ ] Windows Authentication                  Web-Windows-Auth
            [ ] Digest Authentication                   Web-Digest-Auth
            [ ] Client Certificate Mapping Authentic... Web-Client-Auth
            [ ] IIS Client Certificate Mapping Authe... Web-Cert-Auth
            [ ] URL Authorization                       Web-Url-Auth
            [X] Request Filtering                       Web-Filtering
            [ ] IP and Domain Restrictions              Web-IP-Security
        [ ] Performance                                 Web-Performance
            [ ] Static Content Compression              Web-Stat-Compression
            [ ] Dynamic Content Compression             Web-Dyn-Compression
    [X] Management Tools                                Web-Mgmt-Tools
        [X] IIS Management Console                      Web-Mgmt-Console
        [X] IIS Management Scripts and Tools            Web-Scripting-Tools
        [ ] Management Service                          Web-Mgmt-Service
        [ ] IIS 6 Management Compatibility              Web-Mgmt-Compat
            [ ] IIS 6 Metabase Compatibility            Web-Metabase
            [ ] IIS 6 WMI Compatibility                 Web-WMI
            [ ] IIS 6 Scripting Tools                   Web-Lgcy-Scripting
            [ ] IIS 6 Management Console                Web-Lgcy-Mgmt-Console
    [X] FTP Server                                      Web-Ftp-Server
        [X] FTP Service                                 Web-Ftp-Service
        [X] FTP Extensibility                           Web-Ftp-Ext
    [ ] IIS Hostable Web Core                           Web-WHC
More or less the one thing that I am trying to get up and running is an automated FTPS solution - I just use the IIS console to be able to troubleshoot / compare how things scripted from POSH interacts in the MMC representation. The error I am getting
might be that I am lacking some IIS components to be in place to be able to automate some parts of the IIS - as suggested by the IIS.CertObj object listed in the example..... I will get back if I can track down which component needs to be added to be
able to reference the IIS.CertObj object.
Br4tt3 signing out...
br4tt3

Mail automatically adds certificates to Keychain Access. How to disable?

Is there a way to tell Mail not to automatically store certificates from digitally signed emails (in this case, using Verisign) in Keychain Access?
The problem is this:
When the old certificate expires from someone else, I create a new one, and have them send a signed email to my address. Mail then automatically adds the new certificate to my Keychain Access. I then go into Keychain Access and delete the old certificate, so that I can send secure and encrypted messages to them. However, if I go back to one of their saved OLD emails, it automatically adds the old certificate back to my Keychain Access. And when I go to create a new email to them, it often will use that old certificate, which no longer works for them.
I am looking for a way to better manage this or find out what others are doing out there with the same problem.
Keychain should have an "archive" section to put old certificates into. These then can be referenced to open old secure and encrypted messages, but not allowed to be used for sending new email.

Additionally, lets say something happens to your certificate and you need to download it again. In this case, from Verisign. A problem I have run into is when I go to Verisign, I am presented with the option of re-downloading my certificate. If I do this, there is no way on the Mac system that you specify this re-downloaded is your certificate. So I have to download a new certificate and then re-add my certificate to the rest of the employees and get theirs.
There needs to be an option to select "This is my certificate". Very much like in AddressBook, how you can specify different VCards as your own.

I was told by Borders customer service that I have to add them as a "trusted site" to avoid an error message when sttempting to use the shopping cart. Is this true, and how do I do it?

When I go to "checkout" on Borders.com, I get an error message. The message is as follows:
[ServletException in:/ConsumerDirectStorefrontAssetStore/ShoppingArea/ShopcartSection/body.jsp] null'
I have tried refreshing, clearing cookies, and everything I can think of. Customer service told me it had to do with security settings, and that I had to add it to my trusted sites. I have never had to do this before, so I'm jsut wondering if this was true, and how to do it.

Are they multi-function units? Do they include a scanner? Most people call these multi-function copiers, not printers. Printers don't have a scanner in them.
Give us some specifics as to the brands and models you have tried.

How to add an infoobject in a DSO ,on which Infoset is built

Hi,
How to add an infoobject to a DSO,on which an infoset is build.
In general common infoobjects can be for reporting purpose right?
Do I need to add the new infoobject in all the DSOs.My infoset consists of 6 DSOs.
If my concept is wrong.what is the correct method of extracting infoobjects from DSOs to Infoset.
Regards
Lucky

Hi,
You need to add these two fields in the DSO only. Make sure that you are mapping these two fields in the transformation. After that, drop the data and reload the DSO. Then make changes to the infoset.
By Component, what I mean:
I'll take your example only...
Say, for Material_Group, this data is not coming to DSo data Source. In this case, even if you will add this object to your DSO, you wont be able to map this in the transformation as R3 filed is not available. Ultimately, you wont be able to load data for this. So, its worthless.
But, you have a master data called 0Material. and Material_Group is an attribute of this 0Material.In this case, you will add 0Material to the infoset directly, as a component of infoset(from the tab infoobject), and you will select Material group. In this way, we generally aceess the master data attributes.
Revert for more clarification.
Thanks...
Shambhu

How to add a nvidia ge force video card for a pavilion g6 which has a intel hd 3000?

How to add nvidia ge force 525 video card for this laptop?

Hi,
The answer is no way you can add a video card on your laptop. Actually nearly all laptops including many which have dedicated video cards.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

On the Web Wiz Forum, id="gwProxy" ="" ="ifofjsCall==''jsCall;elsesetTimeout'jsCall',500;" id="jsProxy" ="" is added to every reply that I make. Safe mode cures it but how do I know which add-on is the problem?

When I go to a reply window, sometimes it almost looks like there is a little window/box appears (with the 6 dots that allows the size to be changed) It appears to be the cause of the string/code?
On the Web Wiz Forum, < id="gwProxy" ="">< ="ifofjsCall==''jsCall;elsesetTimeout'jsCall',500;" id="jsProxy" ="">
to be added once the reply is posted, to every reply that I make. Safe mode cures it but how do I know which add-on is the problem? I have 25-30 add-ons.

Disable all addons by going to Tools -> Addons and clicking the disable button in every entry under Extensions or Plugins panels.
Restart Firefox.
Confirm the problem isnt there.
Enable each addon one by one by going to Tools -> Addons and clicking the enable button in every entry under Extensions or Plugins panels, in such a way that each time you enable ONE addon, you RESTART the browser and see if the problem STILL happens.
AS SOON AS the problem happens, disable the last addon you enabled. That one is the culprit. You can now enable all the others, if needed.

I have a second laptop. How do I find which add-ons i have on my first laptop?

I recently bought a second laptop. How can I determine which add-ons I currently have installed on my first computer?

You can look in Firefox Button > Add-ons
You can add the following extension to list them for you. Adds a button in Firefox 4 Add-ons window/tab "Dump List". Click that button, window opens, if you just want extension names and version only, un-check everything except version, then save the list to a file by clicking save at the bottom of the window it opens or highlight the list, then Ctrl+C to copy, open Notepad, Wordpad or another application (Word), and paste, then save if you wish:
*'''''Extension List Dumper''''': https://addons.mozilla.org/en-US/firefox/addon/extension-list-dumper/
 
 
'''You need to update the following (all of your versions have known security issues):'''
*Adobe Shockwave for Director Netscape plug-in, version 11.0
*Adobe PDF Plug-In For Firefox and Netscape "9.4.2"
*Shockwave Flash 10.2 r152
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How to add hp printer in windows xp which is in a wireless network?

how to add hp printer in windows xp which is in a wireless network?

What printer?
In general, you can download and install the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to add users to group which is present in another AD domain?

Hi,
Using JNDI how to add user as a member of group which is present in another AD domain?
For example: In AD forest test.com their are two domain a.test.com and b.test.com. Group is present in a.test.com and I want to add user present in b.test.com as a member of the group.
Any pointer around this would be great help.

See the below link to get an idea on group types.
http://technet.microsoft.com/en-us/library/cc755692(v=ws.10).aspx
If the group is a universal group, you can just add members similar to local group even if user and group are in different domains. That is by setting the member attribute of the group.

How to know which leaf node i click and how to add a listener to each node?

hi! hello to all members, i have a problem i know how to create a listener, but i dont know how to add a listener to each leaf node. here is the scenario i want to do, i have a JTree where theres a topic that you can select on each leaf node, so when the user click the specific topic it will open another JFrame,which i dont know how to do it also, that its! the next problem will be how do i know which leaf node i select, so that i can open a right topic before the JFrame will open?please, i am very need this to solve quickly as possible. thanks again to all members.

What you have to do is to add a mouse listener on your JTree. Try something like this:
tree.addMouseListener(new java.awt.event.MouseAdapter() {
         public void mouseReleased(MouseEvent e) {
            tree_mouseReleased(e);
private void tree_mouseReleased(MouseEvent e) {
      TreePath selPath = tree.getSelectionPath();
      // Check If the click is the Right Click
      if (e.isPopupTrigger() == true) {
      // This is your right Click
       else {
                 // This is your Left Click
}Your other problem: Set the userObject on nodes and on left click compare it with your object, if it matches, display the appropriate file. Alternatively, if your nodes are unique, you can match the names to open the file.
Hope this Helps
Regard
Raheel

Do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

How to add certificate which to trust to E60 or to...

Similar Messages

Maybe you are looking for