How to add ChooseFromList in the Grid!!

I would like to know how to add a ChooseFromList in the Grid. I am using SAP B1 2005 and to program in VB.Net.

Hi Carlos... In order to set the ChooseFromList UID and alias you need to convert the GridColumn into an EditTextColummn.
Like this (C#)
oGrid.Columns.Item("UID").Type = BoGridColumnType.gct_EditText;
EditTextColumn editCol = (EditTextColumn)oGrid.Columns.Item("UID"));
editCol.ChooseFromListUID = "UID";
editCol.ChooseFromListAlias = "Alias";
Hope it helps

Similar Messages

How to add spaces at the end of record

Hi Friends,
i am creating a file which contains more than 100 records.
In ABAP i have internal table with on field(135) type c.
some time record have length 120, somtime 130 its vary on each record.
but i would like to add space at the end of each record till 135 length.
Can you please help me how to add speace at the end of record.
regards
Malik

So why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop.

How to add marker on the clip?

Hi!!!
Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
Thanks!!!

Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
>
>
    Re: How to add marker on the clip?
    created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion

How to add request in the buffer

Hii All,
How to add request in the buffer in bulk.
i am using following command.
tp addtobuffer requestno <sid>
but after doing it is giving me the following error
C:\usr\sap\trans\bin>tp addtobuffer BWDK900161 BT1
^CThis is tp version 340.07 (release 640, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Pls help.
Regards,
Viren.

Hi Rolf,
thax for your reply.
But still it is not working it shows following message.
C:\usr\sap\trans\bin>tp addtobuffer BWDK900051 BT1 pf=c\usr\sap\trans\bin\TP_DOM
AIN_BT1.PFL
This is tp version 340.07 (release 640, unicode enabled)
E-c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Regards,
Viren.

How to add filter in the dist. model

hi,
how to add filter in the dist. model
thanks
Ruban

Hi,
Please try this.
1. Go to transaction BD64.
2. Click on Change button.
3. Expand the corresponding model view.
4. Expand the corresponding message type (i.e MATMAS).
5. Place the cursor to 'No filter set' and double click.
6. Click on Create Filter Group.
7. Add your filter from here ...
8. Once done, save the model view.
For more information, please check this link.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Regards,
Ferry Lianto

How to add Acrobat to the Microsoft Office ribbon?

how to add Acrobat to the Microsoft Office ribbon?

Hi ebender888,
What versions of Acrobat and Office do you have? See if this post helps: https://answers.acrobatusers.com/Why-Acrobat-PDFmaker-Office-COM-Addin-tab-disappearnig-Wo rd-Office-2013-q152959.aspx
If not, let us know what software you're using, and we'll try to get you pointed in the right direction.
Best,
Sara

HT5654 how to add videos to the ipad using the latest version of itunes

how to add videos to the ipad using the latest version of itunes ?

Hello zaraa90,
After reviewing your post, I have located an article that can help with syncing content. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Sync your iPhone, iPad and iPod with iTunes using USB
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How to add Video on the OAF page like youtube ?

Any one know how to add Video on the page?

If you are getting HTML code from one of these slideshow.com places, you can add this code to your iWeb pages with a little bit of work. Two things to keep in mind...1. No way to do this via iWeb directly, so it involves editing the published html files, and 2. Because iWeb republishes the html files whenever you update the your webpage, you will lose your changes and have to redo them to add your slideshows back.
The general directions are as follows...
1. Decide where you want your slideshow and know exactly what dimensions you need.
2. Insert a text box onto your page and adjust its size to exactly your dimensions.
3. Type in some uniquely identifiable text like, "SLIDESHOWHERE" without changing the font or anything else...just type it in.
4. Publish your page with iWeb.
5. Find the html file associated with your published page (either on your iDisk or in a folder depending on how you published) and open it in any text editor (like Microsoft Word, or Textedit, or anything). You may need to set your text editor to "ignore rich text" or to "show HTML source".
6. Scroll through the html file and locate your placeholder text, e.g. "SLIDESHOWHERE".
7. Replace the placeholder text with your html code and save your page.
That's it. You should see your slideshow element show up in Safari where you placed the text box in iWeb!

Reg:How to add fields to the scripts in detail

How to add fields to the scripts in detail.
Plz give me one example help me out.

Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
      LIFNR TYPE LFA1-LIFNR,
      NAME1 TYPE LFA1-NAME1,
      LAND1 TYPE LFA1-LAND1,
      ORT01 TYPE ORT01,
      REGIO TYPE REGIO,
      END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
      EBELN TYPE EKKO-EBELN,
      BUKRS TYPE EKKO-BUKRS,
      AEDAT TYPE EKKO-AEDAT,
      ERNAM TYPE EKKO-ERNAM,
      BSTYP TYPE EKKO-BSTYP,
      LIFNR TYPE EKKO-LIFNR,
      END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
      EBELN TYPE EKPO-EBELN,
      EBELP TYPE EKPO-EBELP,
      LOEKZ TYPE EKPO-LOEKZ,
      AEDAT TYPE EKPO-AEDAT,
      MATNR TYPE EKPO-MATNR,
      NETWR TYPE EKPO-NETWR,
      END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
     IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
     WA_EKKO TYPE ST_EKKO,
     IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
     WA_EKPO TYPE ST_EKPO,
     IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
      V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
    TOTAL = TOTAL + WA_EKPO-NETWR.
    CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
   EXPORTING
    DEVICE                            = 'PRINTER'
    FORM                              = 'Z_50886_VENDOR'
    LANGUAGE                          = SY-LANGU
   EXCEPTIONS
     CANCELED                          = 1
     DEVICE                            = 2
     FORM                              = 3
     OPTIONS                           = 4
     UNCLOSED                          = 5
     MAIL_OPTIONS                      = 6
     ARCHIVE_ERROR                     = 7
     INVALID_FAX_NUMBER                = 8
     MORE_PARAMS_NEEDED_IN_BATCH       = 9
     SPOOL_ERROR                       = 10
     CODEPAGE                          = 11
     OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'HEAD'
     WINDOW                         = 'HEADER'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
    CALL FUNCTION 'WRITE_FORM'
     EXPORTING
       ELEMENT                        = 'ITEM'
       WINDOW                         = 'MAIN'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'VENDOR'
     WINDOW                         = 'ADDRESS'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    WINDOW                         = 'TOTAL'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
   EXCEPTIONS
     UNOPENED                       = 1
     BAD_PAGEFORMAT_FOR_PRINT       = 2
     SEND_ERROR                     = 3
     SPOOL_ERROR                    = 4
     CODEPAGE                       = 5
     OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
         BUKRS
         AEDAT
         ERNAM
         BSTYP
         LIFNR
      FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM.                    " get_data_from_ekko
*&      Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT LIFNR
           NAME1
           LAND1
           ORT01
           REGIO
           FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
                LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM.                    " get_data_from_lfa1
*&      Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT EBELN
           EBELP
           LOEKZ
           AEDAT
           MATNR
           NETWR
           FROM EKPO INTO TABLE IT_EKPO
           WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM.                    " get_data_from_ekpo

How to add reminders on the new ios6? I don't have the plus (+)on the upper right as seen on ios5 to add reminder.

How to add reminders on the new ios6? I don't have the plus (+) on the upper right as seen on ios5 to add reminder.

Also, tap the lines at the top left and create a new list, that should give you the + back.

How to add subpartitions to the existing subpartition template

Hi All,
My Question is ,how to add Subpartition to the exiting subpartition template. e
like i have created a table with subpartition template with with 5 subpartitions like
subpartiton one_1 value (121)
subpartition two_2 value(122)
and now i one to add one more subpartitin to the existing subpartition template(Like modify the existing subpartition templete).
subpartition three_3 value(123)
Could any suggest me.
Thanks
Sree

>
My Question is ,how to add Subpartition to the exiting subpartition template.
>
Follow the example in the section for 'Modifying a Subpartition Template' in the VLDB and Partitioning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1007904
>
You can modify a subpartition template of a composite partitioned table by replacing it with a new subpartition template. Any subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS) now use the new subpartition template. Existing subpartitions remain unchanged.
If you modify a subpartition template of an interval-* composite partitioned table, then interval partitions that have not yet been created use the new subpartition template.
Use the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:
ALTER TABLE emp_sub_template
SET SUBPARTITION TEMPLATE
(SUBPARTITION e TABLESPACE ts1,
SUBPARTITION f TABLESPACE ts2,
SUBPARTITION g TABLESPACE ts3,
SUBPARTITION h TABLESPACE ts4

How to add radiobuttons in ALV Grid

Hi,
I refered the threads in SDN but i am not able to get proper solution for my requirement.
I am displaying output in ALV Grid format. After displaying the output i mean in the output screen i need few buttons and radio buttons . when user selects the record and clicks the radio button accordingly my logic should work. Anybody can tell me how to add the radiobuttons in the output of the screen. Please find the below output format for the requirement is
Push button1 Pushbutton2 Radiobutton1 Radio button2
MY program output in Grid format.
Anybody can suggest me how to approach.
Regards,
Maheedhar

Check if this link helps..
http://wiki.sdn.sap.com/wiki/display/Snippets/ABAP-RadioButtonsinALVGRIDREPORT

How to add linked button in grid?

Hi,
Does anyone know how to add linked button in a grid? I can't find it but i saw someone ask similar question but seems none of them works.
Thanks a lot!
P.S. For some reason, i can't use matrix because the data is from a SQL query.
Lan

Hi,
as far as I know it is not possible, since this adjustment is made for the whole column. I have created a grid and I open the shown document by double clicking the row header. In the grid I can see if it is sales or purchase and so I use a workaround by opening the specific system form (e.g. sales invoice) in find mode and search the document by document number (also shown in the grid).
Sample:
oSBOapp.ActivateMenuItem("2053"); //sales invoice
oForm = oSBOapp.Forms.ActiveForm;
oForm.Mode = SAPbouiCOM.BoFormMode.fm_FIND_MODE;
oEdit = (SAPbouiCOM.EditText)oForm.Items.Item("8").Specific;
oEdit.Value = Convert.ToString(dNum);
oForm.Items.Item("1").Click(SAPbouiCOM.BoCellClickType.ct_Regular);
By the click event, you get the specific row number. Hope it helps...
Regards
Sebastian

How to add text to the summary

I wanted to add a text to my summ total on my report.
The forum told me to add a boiler plate text item. However this item displays on every page.. I want it to only display where the summary is. I tried using anchors but it will not attach to the summary item.. Help
howard

Hi Howard,
I guess you are referring to this post:
How do i add text to the summary
First make sure that you place the boilerplate exactly where you had (or currently have) the summary column, ie, in the SAME frame or repeating frame.
Second, open the property inspector for your summary column. Find the properties "Print Object On" and "Base Printing on", and make sure that both of these are the same for your boilerpate as for your summary column.
Navneet.

Simple question .... how to add photos to the body of my EMAILS -Found 1000 results for How do I add photos to my emails for Thunderbird

Simple question - How do I add photos to the body of my emails . But instead of the answer - Found 1000 results for How do I add photos to my emails for Thunderbird. There are answers that don't apply at all to the question in anyway. Why does it have to be so hard to get a simple answer to a simple question?
Thunderbird is acting much like Microsoft, the every reason I dumping MS Live Mail.

First of all, much help for Thunderbird refers to menus which may not be visible. It would help you and us if you have your menus and toolbars visible.
http://chrisramsden.vfast.co.uk/13_Menus_in_Thunderbird.html
So, open a write window. Enable its menu and toolbar(s).
Now do you see an "Insert" option?
If not, you may be set to compose in plain text, which does not support embedded images.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|{select account}|Composition & Addressing''' and ensure "Compose messages in HTML format" is ticked. If it wasn't already ticked, go back to composing a message. Any better now?
Once you have HTML composition mode going, you can use '''Insert|Image''' or various permutations of copy-and-paste and drag-and-drop into your message body.
A manual, of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

How to add ChooseFromList in the Grid!!

Similar Messages

Maybe you are looking for