HOW TO ADD COMMENTS IN REPORT IN WAD

Hello
How to add comments in report in wad...
please reply
thanks

Hai Guru
Please refer to note 1061397. Hope this helps.
Shyam

Similar Messages

How to add an embedded report to custom UI?

Dear colleagues:
Since now I am doing investigation on this:How to add an embedded report to custom UI , so do you have some guideline doc for this?
Requirement is:
Customer want to add a custom report to a custom FS page. And it has some standard fields from contract. So do you have any ideas about this?
Thanks & Best Regards,
Qiang

Hi Jens,
Attachment is the guideline for how to add an embedded report to custom UI. However, so far as i know, there still a limitation that is about inport parameter.
For example, now can show all data of accounts. but i just only want show one account data when click account. so you can share to us if you have any idea about it.
Thanks &Best Regards,
Qiang

How to add Comments in travel expense?

Hi,
How to add Comments in travel expense?Using the FM HRTRV_IF_ADD_RECEIPT. I have gievn the input in the Input Table TEXT.
Eg:-
TEXTID = R001
TEXTLINE = Comments.
It is not updating in the Backend.How to solve this.
Regards
Bala..

Hi madapati,
I debugged the FM HRTRV_IF_ADD_RECEIPT and came to know that for adding comments, have to give
input to the Input table ADDINFO. while giving inputs to this input table, i am getting the error like shown below.
Field PTK33-PLACE. does not exist in the screen SAPMP56T 1310
I checked this screen in the PR01 and PR05 Tcode. There was no screen exists with this screen number 1310. The standard FM HRTRV_IF_ADD_RECEIPT is using BDC for adding the receipts,comments,addinfo ,etc., But i checked the screen number in BDCDATA of standard FM HRTRV_IF_ADD_RECEIPT for adding both comments and addditional information(addinfo) , there the screen number was SAPMP56T 1310. But in the PR01 it was like this SAPMP56T 1960 .
How to solve this issue, and how i have to add comments.
Please send any sample program if u have.
Regards
Bala.

How to add a sub report at the end of the main report whilst grouped

Hi!
I have a main report that is grouped by the Customers name and then details of transactions they did with the company.
I need to add a letter at the end of each group for each customer (With their name displayed in the letter). I tried adding a sub report in the report footer, but it only appears once at the end of the report, rather than at the end of each group for each customer.
How can I achieve the desired result?
Regards
Vik

Vik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason

How to add characteristic in report without having in the multi provider.

Hi All,
I need one requirement to add characteristic in report that is not available in the multiprovider . That field is available on the table level in the BI. How should i bring same field into report level with out adding MP. Note : should not add new filed in to exiting flow .
Please give suggestion how do approach this scenario .
Regards,
Veera.

Hi ,
If you are working in BI7 then u can use infoset to join the cube and charecteristic(the field that ur going to add), I hope your infoprovider is a cube.
Jay

How to add template to report?

Dear All
how to add a user defined template to a report
we are using reports 6i
Thankx and Regards
Raj

Hi Angamuthu
problem is how to attache that tdf file to a report
we have standard formats for reports , i want to enforce them in a templete and use in my reports
i can use predefined templetes as we don't design thru
wizard
can u suggest a alternative solution
Thanks for reading the request
Raj.

How to add program to report tree

Hi ,
Can you please let me know how to add report to report tree..( No transaction code ,just only want to add report)
Thanks,,

Hello Parnith,
There is the SE43N transaction (Area menu transaction update). Here you should be able to locate the corresponding area menu and insert your report in the report tree.
There is also the SERP transaction. This is for old report tree transactions.
Hope it helps you.
Regards,
Daniel.

How to add another new report painter in existing T-code?

HI,
Can someone guide me, how to add a report painter report ZAL into a existing T-code?
My T-code contain 2 report, now i wish to add a new one. So when user execute this T-code, we can see these 3 report.
Thanks

Hi,
add the new report to the report group (T-code GR52) where the 2 already existing reports belong to.
In report painter you don't execute a report but always a report group including one or more reports.
Best regards, Christian

How to Add plant in report?

Hi ,
I have to create a cost center report which is for actual and plan comparison.
Situation is i dont have a business area, i have only plants to value my costs in my report in the column. I am using CCSS table to data extract .I have a field name werks in the table .
How to add Plant into my report ,Can any body help me on creating a set on this. Or is there any solution for this .

Hi,
If a field in FBL1N is not filled it might be because the field has to be created as a special field.
In the Line item Display list in FBL1N follow this menu path: Settings -> Special fields, and add the fields you want from relevant table.
The fields are later available for display,and you can choose them from the Line item Display list following this menu: Settings -> Display variant -> Current. From the hidden list you can now choose the fields you want to have shown. If the technical name is shown for the fields, the special fields are all starting with '1-U_'. It's important, that you add the Special field, if the field also exist as Standard field.
The Special fields are shown in the buttom of the Hiddden list.
Please also read the solution part of note 215798 for some very import- ant steps to be aware of.
But, for having a field shown in the vendor Line Item Display (FBL1N) the field has to exist in the vendor Line Item. If this is not the case, you will evt. be able to see the field in FBL1N by using Offsetting account info.
Check if field WERKS is in the structures RFPOS and RFPOSX. If not, then you need to add the field to the structures RFPOS and RFPOSX. When the structures have been extended with the field then you need to run the reports RFPOSXEXTEND and BALVBUFDEL (in the same way as seen in the solution part in note 215798).
Please assign points if it useful
Regards
Ravinagh Boni

How to add in crystal report

hi i am developing a web application , i am using crystal report plugin in eclipse europa editor .
my problem is that , there is a table which has a date colunm and i am adding all the dates together by using
sum(DateDiff("yyyy",{Birth_date},{death_date)) as a function
i am getting the data by record filter but above formula showing me only result for the last record , what happening to other records , i don't know.
so please guide me .
Thanks in advance...........

Hi Rizwan,
You can't with the report itself because once the refresh is complete it requires a full refresh to update any page. And there is no option to for example refresh just the subreport.
RAS SDK has samples on how to add subreports, see the OverView tab for a link to the samples, but it still requires a refresh to be called.
One way may be to use Subreports on Demand, URL's to another report.... Each subreport would run individually without refreshing the main report. It would like a Table Of Contents report though.
So to be clear, adding pages is the same thing as adding more data. Problem is most of the data needs to be complete so that summaries and running totals etc. type of objects require the data to be complete to be able to render each page.
So why do you need to do this? Can you explain your workflow?
Don

How to add comments to parts on a model in Adobe Reader 3D

How do you add comments to parts on a model in Adobe Reader 3D.
I want the comments to only appear when the user selects the part of the model.

If a link starts with http:// then Reader will recognize it as a link and will make it clickable.
Reader will not recognize an email link. To make it a link you would need to use Adobe Acrobat's link tool or would have to create an email link in the original application use to create the document and convert the file to PDF leaving links intact.

How to add collection to report as data source

Hi all,
i'm trying to add collection to report as data source:
List<DmsLockingItem> items;
ReportClientDocument rcd = new ReportClientDocument();
DatabaseController dbc = rcd.getDatabaseController();
dbc.setDataSource(items, DmsLockingItem.class, "tName","tName");
this works with com.businessobjects.crystalreports.sdk but not with rasapp.jar.
And i can't use plugin lib in my current project.
can anyone help please?
Greetings,
Nikolas

The setDatasource expects the object passed to either be a DataSet, java.sql.ResultSet, IXMLDataSet, or BusinessView object. Are you able to convert your collection to one of these?

How to add results to report from sequence call disabled in report options ?

Hello,
I need to add text to report from a sequence called by a sequence call. The record results option for the sequence call is disabled because the sequence call is normally done thousands of times. Therefore, I don't want to fill in useless text in the report. But, if a certain condition in called sequence fulfills, I would put a text into the report. (Yes, this is related to a sporadic communication problem with the instrument which I want to record into the report.) Which options I have ?
I have attached an example which doesn't add the text from the sequence to the report.
Regards,
Petri
Attachments:
report test.seq ‏45 KB

Hello Ray,
I encounter same behaviour with NONE adapter action step with post-expression as with a statement step as in my first example. With other words, if record results in sequence call in mainsequence is disabled, I cannot get any records into the report.
Attached a modified sequence using NONE adapter action.
Regards,
Petri
Attachments:
report test.seq ‏53 KB

Business Objects and Adobe / Application to add comments per report line

Good day,
Is it possible to use a Business Objects report output and post it into Adobe forms? We would like to use a report output and allow users to comment per report line - online - or is there any other application in Business Objects which will make this possible
For Example:
Report Line Comment
Sales 9999.9999 ______________________________________
Expenses 99999.99 ______________________________________
Thank you.

Hi,
I would suggest you post your question into the corresponding BusinessObjects client tool forum.
Ingo

How to add a workbook report (attached to RRMX) to a role

hi guys,
i have RRMX workbook . how to add this into a role ?

Hi,
Go to work book click on save button and left hand side you will see two options
1. favourite
2.role
click on roll and choose your folder and save it.
Regards,

HOW TO ADD COMMENTS IN REPORT IN WAD

Similar Messages

Maybe you are looking for