How to add crystal enterprise server in portal?

Hello, I am not familiar with SAP Portal, I am a little bit confused with the following direction from point 5. I don't know how to add the system in the landscape. I don't see the Edit list. The netweaver version is 2004.
To configure the BusinessObjects Enterprise server
1. From the top-level navigation bar, choose System Administration; then
choose System Configuration.
2. From the Detailed Navigation iView, choose System Landscape.
3. In the Portal Catalog, expand Portal Content.
4. In the folder containing the systems, right-click a system and choose
Open, and then choose Object.
5. In the System Landscape Editor, from the Edit list, select Crystal
Enterprise Server.
6. In the BusinessObjects Enterprise Editor, enter the following parameters:
u2022 Host Name of Crystal Enterprise Server:
Here you need to enter the BusinessObjects Enterprise server as fully
qualified host name (including the port).
For example: BusinessObjects001.business.net:1080
u2022 Path of BusinessObjects Enterprise Server:
Here you need to enter the path to the viewer application you want to
use for this system.

Hi,
the steps are under the assumption that you have a system already configured in the portal.
the values for the BusinessObjects server are just properties. If you don't have a system configured you would have to create a system first - otherwise you can set these properties for an exisitng system
ingo

Similar Messages

How to add the SSO Server Administration portlet to portal

hi
I want to use SSO Server Administration portlet ,but when i Navigator to the administer tab .in the portal suntab there is not SSO Server Administration .I want to know why? and how to add the SSO Server Administration portlet to portal.(note:the portal system havn't SSO Server Administration portlet ) .how could i can do it. help !~help!

thank you IPeters .this problem was solved. the way is: login the portal with orcladmin and the password is the Infru password. In the administrator sub i see the SSO Server Administration portlet .
thank you very much.

How to add Friendly URLs in Weblogic Portal?

Hi,
We are developing a portal using Weblogic 10gR3. Right now the URL's that are getting formed are very long which includes the nfpb, nfls, pagelabel e.t.c. The requirement is to have a very user friendly url something like http://www.x.com/portal/<<pageLabel>>
The Weblogic documentation mentions something about URL compression, however unable to apply it for dynamic URL's. We have URL's which are formed on the fly from the WLP Content Repository
Is there some kind of servlet / filter provided within WLP. I read somewhere about an URLTransformationServlet. But there was no documentation on its usage. Can some one share a sample code snippet with me. That would be really really helpful, as we are having a slight time crunch here.
Any kind of help on this will be deeply appreciated. Thanks
Thanks and Regards,
Lilly

Dear Team,
Please help us in Change Portal Url . Please find below details and help us asap.
Regards
Radhakrishna
Generic Note
I understand [email protected] looks after your account and he should be able to assist you in this matter.
You could possibly post your question to the oracle forums, like below
How to add Friendly URLs in Weblogic Portal?
[email protected] - November 1, 2010 7:05:03 PM GMT+05:30 [Update from Customer]
Dear Team,
Please let us know how to contact the assigned oracle account manager to engage someone from the professional services team.
Please update us asap.
Regards
Radhakrishna
Oracle Support - November 1, 2010 5:28:59 PM GMT+05:30 [Information]
Generic Note
I would suggest you contact the assigned oracle account manager to engage someone from the professional services team.
[email protected] - November 1, 2010 4:55:25 PM GMT+05:30 [Update from Customer]
Dear Team,
How to engage oracle professional services to team to get assistance.
Regards
Radhakrishna
Oracle Support - November 1, 2010 1:48:49 PM GMT+05:30 [Information]
Generic Note
As mentioned earlier, changes to the portal url is not provided out of box, the documentation link that I provided mentions a possible way of achieving this by creating a start up servlet, this may or may-not work in all circumstances. If the suggestions provided so far has not helped you so far, I would recommend you engage oracle professional services team to get assistance.
[email protected] - November 1, 2010 1:36:12 PM GMT+05:30 [Update from Customer]
Dear Team,
Please find below comments from Dev team.
While try to incorporate the URL navigation changes at
our development environment we are getting exception Unable to render /framework/skeletons/bharti_skeleton/singlelevelmenu.jsp .
I have also checked feasibility for the URL navigation changes provided and will not work for left menu
and footer URL because while rendering these URL we are not using single level menu jsp or multilevel menu jsp.
Please check with these comments and update ASAP.
Regards
Radhakrishna
[email protected] - October 28, 2010 7:56:02 PM GMT+05:30 [Update from Customer]
Hi,
regarding making changes to the url meets ,we are working on the document which you have provided.we will update with result onc it get finished.
Regards,
Eranna D.
Oracle Support - October 28, 2010 7:06:32 PM GMT+05:30 [Information]
Generic Note
Since your question about Rich Text support in CMS is not related to portal urls, I would request you raise this as a separate issue.
In the new SR, please elaborate what you mean by the Rich Text support, whats your proposed use case, whats working and what is not.
Could you also confirm if the further information I have provided regarding making changes to the url meets your requirement.
[email protected] - October 28, 2010 7:04:48 PM GMT+05:30 [Update from Customer]
CMS----Content Management System
Rich contents are : Media files, Vedios, Movies... etc.
[email protected] - October 28, 2010 6:58:46 PM GMT+05:30 [Update from Customer]
Hi,
Can you please clarify the below point also.
"Please confirm whether CMS support Rich Text in weblogic , currently we have the weblogic version 9.2 . Plz confirm whether it will support or not."
Regards,
Eranna D.
Oracle Support - October 28, 2010 5:41:53 PM GMT+05:30 [Information]
Generic Note
The following documentation http://download.oracle.com/docs/cd/E13218_01/wlp/docs81/url/simplify.html tells how you can achieve the simple urls you are looking for.
Could you let me know if this meets your requirement.
[email protected] - October 28, 2010 12:07:05 PM GMT+05:30 [Reopen Request]
Hi,
Please clarify why it is not possible to remove nfpb parameter.
Call Me on +91 9686971269 ASAP.
Oracle Support - September 29, 2010 5:39:48 PM GMT+05:30 [ODM Answer]
=== ODM Answer ===
weblogic portal does not provide any out of the box way to achieve this functionality
Oracle Support - September 29, 2010 5:39:15 PM GMT+05:30 [ODM Question]
=== ODM Question ===
need to change the URL
http://hostname:port/ics_war/ics.portal?_nfpb=true&_pageLabel=Tariff
to
http://hostname:port/ics_war/ics.portal/Tariff.
Oracle Support - September 25, 2010 4:42:01 PM GMT+05:30 [Information]
Generic Note
WLProxy configuration falls under the weblogic server product hence you will have to raise an SR with that product to get any suggestions.
Before that I would suggest you play around with the parameter I have suggested and see how it is impacting the url and then if there is any specific area you are stuck on check with the WLS team.
Like I mentioned earlier, I do not know if this will completely meet your business requirement, but something you can look into.
[email protected] - September 25, 2010 4:32:00 PM GMT+05:30 [Update from Customer]
Hi,
Can you please brief us what all are the changes needs to be done to meet our below requirement.
Regards,
Eranna D.
+91 9686971269
Oracle Support - September 24, 2010 9:00:57 PM GMT+05:30 [Information]
Generic Note
URLCompression servlet is the only option that weblogic portal provides out of the box to compress the URL of WLP. I understand this does not suite your requirement.
The other option I can think of that can possibly help you achieve this is to configure any weblogic proxy plugin that you might be making use of, see the document
http://download.oracle.com/docs/cd/E15051_01/wls/docs103/plugins/plugin_params.html#wp1143055 look for PathTrim, PathPrepend
[email protected] - September 24, 2010 5:41:39 PM GMT+05:30 [Update from Customer]
Hi,
Please call me on +91 9686971269 ASAP.
Regards,
Eranna D
[email protected] - September 24, 2010 5:41:22 PM GMT+05:30 [Update from Customer]
Hi,
Even thogh after implementing the below changes,still we are not able to get the result. " nfpb parameter is still existing in URL ".
Implementing URL Compression :
To configure a webapp to use url compression, follow these steps:
1. Define the compression servlet in web.xml; for example
<servlet>
<servlet-name>UrlCompressionServlet</servlet-name>
<servlet-class>com.bea.portlet.compression.UrlCompressionServlet
</servlet-class>
<init-param>
<param-name>defaultPage</param-name>
<param-value>/index.jsp</param-value>
</init-param>
<init-param>
<param-name>errorPage</param-name>
<param-value>/errors/error.jsp</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
2. Map the compression pattern; for example:
<servlet-mapping>
<servlet-name>UrlCompressionServlet</servlet-name>
<url-pattern>wlp.c</url-pattern>
</servlet-mapping>
3. Add the token {url:compression} to the templates for which you want to apply compression.
Please suggest on this ASAP.
Regards,
Eranna D.
[email protected] - September 24, 2010 5:27:58 PM GMT+05:30 [Customer Problem Description]
Problem Description: We need to change the URL
http://hostname:port/ics_war/ics.portal?_nfpb=true&_pageLabel=Tariff
to
http://hostname:port/ics_war/ics.portal/Tariff.
Pls suggest on this.
Regards,
Eranna D.

How to add a role to the Portal Favorites

Hello gurus,
I have a role to add to the Portal Favorites to avoid drilling down to many levels, does anyone know how to add a role to the Portal Favorites?
Thanks in advance for your response.
Regards,
Niki Nguyen
Message was edited by:
 Niki Nguyen
Message was edited by:
 Niki Nguyen

Niki,
The documentation says that
The Portal Favorites iView contains a freely definable list of links for direct access to items that you use regularly. This can include the following:
● Portal pages and iViews that run as full-page applications
● Documents, folders, and other items in KM repositories
● External items, such as Internet pages
So we can't do it for Roles.
For detailed information see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/3a/d609e5803111d5992f00508b6b8b11/frameset.htm">Portal Favorites</a>
Mr.Chowdary

How to add Navigation Level to the Portal?

Hi All,
How to add Navigation Level to the Portal?
for example:
1st Level is the Role
2nd Level is Worksets/Folders
I want that the 3rd Level will contain more Worksets/Folders and will be under the 2nd level and not in the "Detailed Navigation".
I tried to change the "Number of display levels" in the framework page but it didn't help.
Attached a picture with the required result (of course, for my roles)
http://img457.imageshack.us/my.php?image=toplevelnavigation7xy.jpg
Thanks, Omri

Hi Omri,
in fact, almost one year ago we did something similar on a project basis, but as already stated here, this was done by modification. What we did was providing a dropdown box within the masthead, containing the first level, and the second and third level now have been displayed where normally the first and second level are. That was a ten days solutions, some very fine granulated work. But nice
Anyhow, nowadays this can be more easy using the LightFrameworkPage (if that's OK for your purpose) and the Navigation Tag Library, see http://help.sap.com/saphelp_nw04/helpdata/en/42/f35146a7203255e10000000a1553f7/frameset.htm for details.
Hope it helps
Detlev

How to Add RSM secondary server to IP IVR-UCCE

How to add secondary RSM server in the cluster
In the RSM.aef script i can see there is a option for adding active IP but secondary IP ?, do i need to modify the script to add the second one, does anyother changes required

Hi,
this might be a silly question, but what is RSM in this context?
G.

Crystal Enterprise Server Installation

Hi all,
My aim is to write a crystal report that will communicate with the BW Business Object and display the data from SAP BW Server and i want to publish the report through the web using the portal iview.

I download the Crystal DVD from http:
service.sap.com it contained three folders. They are...
1. Crystal Report(cr)
2. Crystal Enterprise(ce)
3. Crystal Enterprise SAP Add-On(ce_se_disc1)
For installing these software i needed three serial keys...
On running the installation i found "Get KeyCode" Button, which lead me to web page...
http://www.businessobjects.com/jump/sap/oem_bw35_sap/en/form.asp
On submitting the form from the above link i got the 3 serial keys.
But, When i tried to install the setups, it reported me an
error "Serial Key is invalid".
I am able to successfully install only the Crystal Reports(cr). The problem persists when i tried to install the Crystal Enterprise(ce) and addon.
I am looking forward for a solution about the above problem.
Points Guarenteed.
Thanks & Regards,
Maheswaran.B

Hi Sharad dixit,
As you can see the above posts, it clearly states the i am not able to install the crystal server on my machine because i donot have a key code.
Do you have the Key Code?
If you have please send it to me from the email id in my business card. ( Just click on my name in the left side of the post ).
If you are only intreasted in the crystal report document you can get it from the SDN or http://service.sap.com...
Regards,
Maheswaran.B

How to Convert Crystal Enterprise v10.0 Business Views to BOE XI?

Hi,
It took a long time, but my company FINALLY upgraded from Crystal Enterpise and Crystal Reports v10.0. We just purchased BusinessObjects Edge XI and Crystal Reports 2011. I went to the training class a few months ago, but due to the delay in our actually getting the applications, I feel as though I've forgotten most of what I was taught!
With the old version, we built all our reports off Business Views (using Business View Manager - which was an add-on component of Crystal Enterprise) that are sourced from an Oracle database. I have over 420 report files that are built against these business views.
I have tried to open a report in Crystal Reports 2011, and I'm prompted to log in to BusinessObjects Enterprise to load the business view. When I enter the credentials for the NEW system that I just installed (a brand new install on a new server), I get an error "Access Denied: You cannot log into an older version of the CMS." So obviously the stored business views that are trying to load have the old system information associated with them. Understandable.
I cannot find Business View Manager in the new BOE XI. Is it an add-on? Where can I get it? Can I even convert my old business views? If not, am I going to have to rebuild all my data sources?
I don't know what a "Universe" is - and I've never used them - but is that similar to a Business View?
The problem I get is that if I try to associate a new data source (I tried direct Oracle connection), all the fields in my report disappear when the old (unloadable) business view is removed. Essentially this would require me to rebuild all my reports!
I'm not sure what to do here. I have 420+ reports to convert so we can load them on this new server, and I have only about 2 weeks to do it. If I have to rebuild them all, there is no way I can complete this in time for our cutover.
ANY HELP WOULD BE GREATLY APPRECIATED!! (I'm new to this "forum" thing, too - so if I'm not doing this right or if there is some other place I should be putting this, please let me know)
Thanks,
Amber Smith

Hi Amber,
Thank you for the reply.
Well if you can logon to Business Objects Server then you can see the Business View Manager from Start menu-> All Programs-> Business Objects Enterprise XI 3.1-> Business View Manager
or else you can look for business view manager executable file in c:\program files\business objects\business objects enterprise 12.0\win32_x86\CrystalBVM.exe
When you open Crystal reports, there is an option to change the datasource of an existing report to any other datasource. The only condition that should be met is that the structure of new datasource should be similar to the existing one.
I have not changed the business view datasource to universe, but i will try it and let you know.
Thanks,
Kuldeep G

How to add a new language in portal?

Hi,
I have a requirement to add new language(Marathi) in portal.Using the thread 468191 i configure it in portal content translation.but the language is not visible in personalize option.How to acheive this ?
Regards
Bala

Bala,
In that thread, check Deeps' post
For Hindi to come in drop-down list, I put the languages_hi.properties in umeuseradminbase.jar file and put the entry hi=Hindi in languages_hi.properties, languages_en.properties and languages_de.properties only and remain all other files as it is. After that restarted the server
So probably you might have to do a similar thing for Marathi.
Also, refer to this thread.
https://www.sdn.sap.com/irj/sdn/thread?messageID=6043933#6043933
Good Luck!
Sandeep Tudumu

Backup & Restore of Crystal Enterprise Server

Hi Experts,
I want to make a backup of Crystal report server which are having below contents.
- Users Rights Setting
- Authentication Setting
- Folder Setting
- Reports
- Central Management Server
Can you tell me how to backup it and restore it ?
Thank you very much.
O/S Windows 2003 Server.
Crystal Server 10

Hi
When I run the update object.....getting below message.
"This CMS has 0 objects the require updating......"
I tell u exactly wht I stored.....as I took a cold backup which having a below folders.
CMS Database C:\ Program Files\Business Object\MYSQL\mysql-pro-4.1.13a-win32\data\Boe115
FRS: C:\ Program Files\Business Object\Bussiness Enterprise 11\Filestore\Input\*.* Output\*.*
I installed Business Objects 11 to another server and copy the above folders and past to above location. After that I run the update objects getting the CMS has 0 objects the require updating.
Regs,

How do you configure Enterprise Server to allow WiFi retrieval of email when in WiFi Area

We have an Enterprise Server and WiFi in offices and homes and lots of free WiFi on our travels. How do you configure the phones/enterprise server to allow this? I cant see any easy option??

Llessur999 wrote:
That is a reasonable approach. Without changing network configuration, I don't see an alternative. A few considerations:
Based on your experience, will the length of time to detect unreachability (a network timeout?) cause a usability issue?
Must you support a scenario where a user transitions LAN-to-WAN or WAN-to-LAN while using the app?
If this is used by a wide audience, will configuring the primary/fallback be straightforward?
I don't think there's a usability issue.
Yes. The app is designed for a brick/mortor location that essentially wants to drive the user to the location. The user has to ability to interact with specific hardware components at the location via server/port communications - some of which they can do while they are remote. While they are on location, they need to retain that ability to interact with local equipment even more. Users could be asked to not go on the location wifi of course but that just seems silly and an overall bad user experience.
The primary/fallback configuration should all be done within code (no user interaction). For example the WAN IP will always be X.X.X.X (be it Public IP or dyndns - makes no difference), while the LAN configuration will always know that the lan server it needs to communicate will always be at a specific LAN IP (192.168.x.x).
It would be godsend to have some sort of API call (or class) that can accept a call to CFStreamCreatePairWithSocketToHost to a specific IP and on seeing that it's unreachable automatically try the secondary IP before returning a failure on the stream.

How to add another Planning Server to the Shared Connections?

Hi,
This is for version 11.1.2.1.103
Currently all of our users use Planning in Prod environment. I would like to open the UAT environment to a smaller set of users. UAT environment is in our Test environment. I couldn't figure it how to add the UAT environment to the current Prod Shared Connections. I was hoping it would be as easy as right click on the Prod Planning Server > click on Add > Add the UAT server > Click OK.
Instead I had to follow couple of steps to add the UAT environment to the SV:
1. SmartView > Options > Advanced > Edit Shared Connections URL with UAT environment URL > Click OK
2. Connect to Shared Connections > Planning
3. Right click on the Plan Type > Click on Add to Private Connections
4. Follow the same steps for the PROD Plan Type.
Now, I do have two environments under Private Connections and I do not need to follow the first step every time I want to switch between environments.
Was it a overkill or I did it right?
Thanks,
Mehmet
p.s. I just noticed that in Shared Connections, you can add another Essbase Server, but that's not an option for Planning.
Edited by: Mehmet Sevinc on May 8, 2012 2:48 PM

Hi Again,
following up my previous comment on this, you can create a macro and assign to an event or macro in the excel to change shared connection URL.
Declare Function HypSetSharedConnectionsURL Lib "HsAddin" (ByVal vtAPSURL As Variant) As Long
Sub SubHypSetSharedConnectionsURLTest()
Dim lRet As Long
lRet = HypSetSharedConnectionsURL("http://UATserver:19000/workspace/SmartViewProviders")
End Sub
http://docs.oracle.com/cd/E17236_01/epm.1112/sv_user/ch17s01s08s10.html
Hope this helps,
Ahmet

How to add azerbaijan language to sap portal

how to add new azerbaijan language to sap portal?İ want step by step configuration .Thanks advance

Hi,
please have a look at:
1013521 Configuration of supported languages within the portal
Best regards,
Nils Buerckel

How to integrate Crystal Report Server and J2EE platform

Hi,
It's my first time using Crystal Report, so I don't know exactly how I should start...
As what i've searched around, there is a method of generating crystal report from a JSP file. By this way, everything will be handled within the application server.
But in my project, we intend to leave the part of handling and generating report to another server, i.e. there will be 2 servers: application & report. Anyone experienced with this can guide me through? By splitting into 2 servers, that means I will need to have the Crystal Report Server right? And if doing so, from the application, how do I call the Crystal Report server?
Thanks for viewing...

You can use [Crystal Reports for Eclipse|Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!; to do exactly this. It comes with an example application for displaying reports using the CR Web Report Viewer. It's EXTREMELY easy to use and even to integrate in your existing web app. If you're using Eclipse and have the CR4E plugin installed, you can go to File > New > Crystal Reports and select Crystal Reports Web Project. This will create the CR server application for you. You can also right click on an existing web app and have Crystal Reports integrated directly into your existing app.
To do this, just right click on your web app and go to Project Properties. Then, go to Project Facets, check the box next to Crystal Reports, click Apply and then OK. It will copy all of the necessary runtimes into your lib folder and will even update your web.xml to include the stuff needed for CR. On the left, you should see Crystal Reports File Versions. Click on that and you should see the version of Crystal that was just installed into your web app along with all of the files that were copied or modified.
You could probably then create a report viewer in your other app (maybe an iframe?) that includes a link to the report in the CR Web App.
If you need more assistance with this, let me know. I'd be glad to help out as I've already played with something similar to this.

How to add Crystal Report Basic 2008 in SAP B1 2005 B

Hi All Experts,
I have installed Crystal Report Basic 2008 in SAP B1 2005 B PL 25.
But I dont know how to add this in addon.
Can any body guide me to do plz.
With Warm Regards,
Chintesh Soni

Chintesh Soni
Go to administration >add-on mabager and make sure crystal report is started
now select administration -> Crystal Report Administration->Account Setup ->enter password for ur database and click-> update->create Ext Tables
now select Manage Crystal Report->new report ->Browse to add .rpt file, give a name description select module and you can set the access as public or any specific group. select public for first time and click update
Now click on Preview and Print to view the report
Thanks
Krish

How to add crystal enterprise server in portal?

Similar Messages

Maybe you are looking for