How to Add Custom Field in Blackberry
How can we add custom field in Blackberry 8830 or a Curve ?
Hani Abidi
hello, what application are you talking about?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:
Similar Messages
-
How to add custom fields in BADI Subscreen.
Hi Friends,
I have to include some custom fields in MFBF tcode.(In make-to-order tab page).
To do that I have used RM_HR_INTEGRATION BADI definition and created implementation for this. In the provided subscreen I tried to add custom fields but it asks access key . I donu2019t know , how to proceed further. Your help is needed.
Or kindly provide me solution to achieve my requirement.
Thanks in Advance,
senthil.Hi Venky,
We can see the documentation in
se18 -> badi -> LE_SHP_TAB_CUST_HEAD -> display -> documentation button above the definition name
in the first pop-up of documentation..go to the end which says 'Further notes'
Further notes
Documentation on BAdI Interface LE_SHP_TAB_CUST_HEAD
click on this and we have a detailed description of each method defined in the badi
Hope it helps
Regards
Byju -
How to add custom field to ical
Hi
I run a small business from my mac pro and my iphone. I would like to get a good workflow but it seems I am missing a few bits of information.
First I would like to add custom fields to ical so that I can gather all the information I need in one spot. For example, I create a meeting with new client Tim Smith on Friday so I want to enter his name and contact info into ical because I need his address and phone number on the event so I can reference it.
Then I would like to find a way to automatically create a contact card based on that information. If I can find an apple script that reads the fields in Ical and creates new contacts based on new events that I created.
Then I would like to automate extracting the email addresses to send out preformed group mailers for people who were in my calendar that day ie "Thanks for meeting with me, I think we got a lot accomplished and hope to see you at the next meeting." etc etc
Then also automate reports based off of my ical events such as "Report for how many times I had a meeting in the Blue Room this week" or "How many times did I meet with Timothy Smith" this year
I have tried automator and it doesn't seem strong enough to do this so I am thinking AppleScript but I am not very good at it. Anyone have any ideas on any of these issues?Tried the iCal forum and support
www.apple.com/support/ical
Tried Lion Community?
you have notebook and tower?
www.apple.com/support/macbookpro -
How to add custom field to the task via CSOM?
Hello!
I'm trying to add custom fields to my programmatically created task in project 2013. Tasks are created. Then I get them and load custom fields by:
DraftProject projCheckedOut = tstProj.CheckOut();
projContext.Load(projCheckedOut.Tasks);
projContext.ExecuteQuery();
foreach (var task in projCheckedOut.Tasks)
projContext.Load(task.CustomFields);
projContext.ExecuteQuery();
But the each CusomFieldCollection object has only 1 field (Health, because it have a default value and created automatically). But when I load my project in Project professional i saw more than 1 field, but they are empty.
Then I tried to add a new custom field to each CusomFieldCollection of each task.
var newField = new CustomFieldCreationInformation();
newField.FieldType = CustomFieldType.TEXT;
newField.Name = "F_1";
newField.Description = "test description";
task.CustomFields.Add(newField);
task.CustomFields.Update();
New field added to the collection, but when I update the project and publish it nothing is happened.
How to add a custom field to the each task and set it value?
Or how to attach enterprise task custom field to my tasks.
I'm using Microsoft.ProjectServer.Client.Hi
Hope the below posts are of some helpful for you
http://social.msdn.microsoft.com/Forums/en-US/d79f22f2-7fd2-46af-b778-e189c8611120/use-csom-to-update-projects-custom-fields?forum=project2010custprog
http://msdn.microsoft.com/en-us/library/microsoft.projectserver.client.project.setcustomfieldvalue.aspx
Thanks
Geeth
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful. -
Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type : BUS2121/BUS2201
Set Level : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
RohitHello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima -
In T-Code: MIRO ; how to add custom fields in Table Control
In MIRO
in PO Reference tabstip i want to add 2 custom fields ( say PO segment Invoice number and vechecle names i have to populate ).
How to do dis ,
any BADIs or any EXITS ????
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Ramesh.
Edited by: Alvaro Tejada Galindo on Dec 29, 2009 11:24 AMok
-
How to add custom fields to the sap standard program ukm_bp_display
How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
partner LIKE but000-partner,
credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
INCLUDE STRUCTURE ukm_s_account.
INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA: credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
Gruppe Vector
INCLUDE STRUCTURE ukm_s_bp_vector.
Gruppe OBL = Obligo
include structure UKM_S_BP_CMS_MALUSDSP_OUT.
INCLUDE STRUCTURE ukm_s_display_segment.
INCLUDE STRUCTURE ukm_s_bp_cms.
INCLUDE STRUCTURE bus000_dat.
*DATA: icon(4).
Gruppe RAST (Raster)
DATA:
rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA: rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas -
How to add custom field in Message type MBGMCR IDOC
Hello,
Could you please help me on below requirement.
There is standard IDOC type MBGMCR.In this IDOC type there is one segment with the name E1BP2017_GM_ITEM_CREATE.
How can we add custom filed in this segment E1BP2017_GM_ITEM_CREATE?
I tried to use Append structure.But systme is not allowing us to create custom filed in this..
It is a outbound.I created custom program to send this IDOC to other system .
Could you please help me out on this.
If you need any further details pls let me know.Thank you in advacne.
RegardsHello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima -
How to add custom field in SRM-MDM catalog
Hi Guys,
I have to add a custom field in SRM-MDM catalog. I know, it is done through MDM console, but how, it is done, This, I don't know.
Please help me.
Thanks in advance!!
Note-> we are at SRM5.0 + MDM2.0
NeeleshPlease check the online help.
[http://help.sap.com/saphelp_mdm550/helpdata/en/6c/24e342f6307176e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_mdm550/helpdata/en/6c/24e342f6307176e10000000a1550b0/frameset.htm]
Regards,
Masa -
How to add customized fields for free search in PA30
Hi,guys
I have created some customized infotype. and I want to add the field of that infotype into free search.
How do I do that?
Please help
Thank you in advanceHi Luke,
I am getting follwoing error in cds file 1906. 05 Oct 2011 09:46:58 ERROR com.nakisa.Logger - com.nakisa.framework.data.commandProcessor.impl.OracleCommandProcessor : getDataTables : Problem executing query. Data Element Name: SAPOrgUnitDataElement.
This error is only coming in Quality & not in dev. In Dev, It is showing Org Structure for a scenario but in Quality, it is showing a blank screen & giving this error in cds log file.
I have copied SAPOrgUnitDataElement.xml into SAPOrgUnitDataElement_copy.xml & then used standard SAPOrgUnitCostCenterInheDataElement data element to create a linked data element called SAPOrgUnitDataElement (using SAPOrgUnitDataElement_copy & SAPOrgUnitCostCenterInheDataElement).
All the fields in SAPOrgUnitCostCenterInheDataElement got added in source Organization Structure feilds & I have also added cost center name field in view but still it is not showing in scenario Org chart in dev. Because of data issues, I thought to test it on Quality but there I am even not able to see Org chart for a scenario & it is giving above said error in cds log file.
Please help!
Thanks,
Prashant -
How to add custome field to QM01 transaction .
Hi every one !
i want to add cutstom field to QM01 transation .
i trying to this using QM00_SUBSCR_5000 badi . but here when i open subscreens tab layout when i going to add input out box and label
its asking for access key .
how can i do this pls any one send me clearly using screen shots ...
see the screen shot attached ....Addition of Custom fields to QM01 Tcode:
Go to function group XQQM
,create the screen under screens tab number 0090.
Declare the screen fields under include tab ZXQQMTOP .
data :
dist like qpcd-code,
sal like qpcd-code,
cust like qpcd-code.
Under process on value-request. Create a module for f4 help
for the custom fields.
Under the function module EXIT_SAPMIWO0_008 write the code for updation of custom fields to
the structure viqmel.
Under PAI create a module for capturing the screen field
values.
Case sy-ucomm.
when '10\TAB02'.
viqmel-cust = cust.
viqmel-dist = dist.
viqmel-sal = sal.
endcase.
For
QM02 and QM03use EXIT_SAPMIWO0_008 for display of
the screen field values.
Under the PBO of the screen create a module for fields to
be in display mode.
if sy-tcode = 'QM03'.
loop at screen.
if sy-ucomm = '10\TAB02'.
screen-input = 0.
modify screen.
endif.
endloop.
endif.
Thanks,
Shailaja Ainala. -
How to add Custom fields ( under the Custom Tab) in RMMAIN ( SOLMAN 4.0)
Hi Expert,
I am working in SOLMAN 4.0
i want to add some Custom fields in RMMAIN Transaction -Screen level..( under one custom tab)
i have tried in EEWB, it is not helpful for RMMAIN
is any Screen exit available for RMMAIN? or any other way?
I ll give Reward points
Thanks & Regaids
Ganesh, RHi,
go through this...
https://wiki.sdn.sap.com/wiki/display/Snippets/Displaycustomerfieldsinheaderoflogisticsinvoiceverification+transactions
Thanks,
Shailaja Ainala. -
How to add custom field in Documents Tab of PO Header ?
Dear SRM Friends,
This is a challenging task as an ABAPer to confront to..
We are in the midst of a requirement where we have to add a custom field in the PO Header. But the requirement is to add the field in Documents Tab in PO Header Data as found in the following path of SRM Webpage :
Operational Purchaser > Purchase Orders > Process Purchase Order > Select a PO > Header Data > Documents.
As guided by "Note 672960 - User-defined fields 2" , on executing all the steps of the note the field is getting added, but in the Basic Data Tab of the PO. But this doesnt meet the client requirement.
Anybody having some solution to this, shall be greatly awarded.
Thanks in advance,
Vikas.Hi Vikas,
You can define a Text ID in Header data with F4 help. But the list of values will be fixed, but configurable. This will exactly solve your problem. This will be quite simple and straight forward solution with no custom developments.
Please Navigate to
SAP Implementation Guide -> Supplier Relationship Management -> SRM Server
-> Cross-Application Basic Settings -> Text Schema
1. Define Text Types
Select BBP_PD and double click text id. Add a new text id here.
2. Define Text Schema
Select PO and add the newly created text id and set required parameters.
3. Define Fixed Values for Texts
Select your PO transaction type and maintain the required values for F4 help / drop down.
Hope this would solve your problem.
Regards
Kathirvel -
How to add customer fields in UI Marketing.
Dear SAP Colleague,
We are migrating our SAP CRM landscape from version 4.0 to 7.0.
We have already performed a technical migration of our development environment. But now we are facing the following issue:
In 4.0 we have a Custom Aditional Fields Tab at the Campaigns Screen in the CRM_MKTPL transaction.
This fields were customized through the CRMC_MKTPL_SETTYPE transaction
Now, in 7.0 the UI doesn't show this fields and the IMG Activity corresponding to this transaction is out of the menu,
also, in 7.0 this transaction is obsolete.
How can we do it in order to use this fields again.
Edited by: Jorge Anzola on Aug 12, 2011 12:13 AMThanks Naresh, I can use the AET but with this tool I create the new fields and show them at the UI, but in the CRM Aplication the tool make an append structure in the main table of campaign, then the fields have a direct relationship with each record on the table, i.e. with each campaign.
My problem is that I have another table Zxxxxx containing the fields and filled with the info entered by the business transaction when we had the release 4 of the CRM. Then I can't make the binding with this table.
How can I refer the fields in the UI to the fields in this another table, and how can I make the relationship between the main table of campaign and my Z table. ? -
How to get custom field value in vbkd table using "SD_SALESDOCUMENT_CREATE" bapi
Hi Experts,
Need your help . In one program Iam using SD_SALESDOCUMENT_CREATE bapi .
i/p for my report is am excel.
excel is having below formatt.
To create salesdoc we are using SD_SALESDOC_CREATE bapi.
but After execution of the program we are unable to find the ZZFV_SBCNT (which is custom field) in VBKD w.r.t salesdocument.
Need your help what we need to do to reflect the value in vbkd table.
Here temp will contains the data from excel
1)
FORM f_move_header_data .
wg_header-doc_type = wg_temp-auart . "Order type
wg_header-sales_org = wg_temp-vkorg . "Sales Organization
wg_header-distr_chan = wg_temp-vtweg . "Distribution Channel
wg_header-division = wg_temp-spart. "Division
wg_header-sales_off = wg_temp-vkbur . "Sales Office
wg_header-sales_grp = wg_temp-vkgrp . "Sales Group
wg_header-purch_no_c = wg_temp-bstnk . "Customer purchase order number
wg_header-pymt_meth = wg_temp-zlsch . "Payment Method
wg_header-zzychan_role = wg_temp-zzychan_role_i. "Channel Role
wg_header-zzysub_role = wg_temp-zzysub_role . "Submitter Role
wg_header-zzy_inv_for_opt = wg_temp-zzinv_format . "Invoice Format Optio
wg_header-ord_reason = wg_temp-augru . "Order Reason Code
wg_header-bill_block = wg_temp-faksp. "Billing Block
wg_headerx-doc_type = c_set . "Order type
wg_headerx-sales_org = c_set . "Sales Organization
wg_headerx-distr_chan = c_set . "Distribution Channel
wg_headerx-division = c_set. "Division
wg_headerx-sales_off = c_set . "Sales Office
wg_headerx-sales_grp = c_set . "Sales Group
wg_headerx-purch_no_c = c_set . "Customer purchase order number
wg_headerx-pymt_meth = c_set . "Payment Method
wg_headerx-zzychan_role = c_set. "Channel Role
wg_headerx-zzysub_role = c_set . "Submitter Role
wg_headerx-zzy_inv_for_opt = c_set . "Invoice Format Option
wg_headerx-ord_reason = c_set . "Order Reason Code
wg_headerx-bill_block = c_set. "Billing Block
ENDFORM. " F_MOVE_HEADER_DATA
2)
FORM f_move_item_data .
wg_item-itm_number = g_itmnumber. "Item number
wg_item-material = wg_process-matnr . "Material
wg_item-target_qty = wg_process-target_qty. "Targeted Qty
wg_item-item_categ = wg_process-pstyv. "Sales document item category
wg_item-zzylegal_i = wg_process-zzlegal. "Legal Contract
**********Added this line for vbkd-ZZFV_SBCNT****************************
wg_item-zzfv_sbcnt = wg_process-zzfv_sbcnt.
APPEND wg_item TO i_item.
wg_itemx-material = c_set . "Material
wg_itemx-target_qty = c_set. "Targeted Qty
wg_itemx-item_categ = c_set. "Sales document item category
wg_itemx-zzylegal_i = c_set. "Legal Contract
wg_itemx-zzsteady_date = c_set . "Amortization Start Date
wg_itemx-zzsteady_end_dat = c_set. "Amortization Stop Date
**********Added this line for vbkd-ZZFV_SBCNT****************************
wg_itemx-ZZFV_SBCNt = c_set. "
APPEND wg_itemx TO i_itemx.
CLEAR : wg_itemx.
endform.
3)
FORM f_move_head_ext
wg_extension-structure = c_ext_vbak.
wg_ext_vbak-zzinv_format = wg_temp-zzinv_format.
wg_ext_vbak-zzychan_role = wg_temp-zzychan_role_i.
wg_ext_vbak-zzysub_role = wg_temp-zzysub_role.
wg_extension+30 = wg_ext_vbak.
APPEND wg_extension to i_extension.
CLEAR wg_extension.
wg_extensionx-structure = c_ext_vbakx.
wg_ext_vbakx-zzinv_format = c_set.
wg_ext_vbakx-zzlegal = c_set.
wg_ext_vbakx-zzychan_role = c_set.
wg_ext_vbakx-zzysub_role = c_set.
wg_extensionx+30 = wg_ext_vbakx.
APPEND wg_extensionx TO i_extensionx.
CLEAR wg_extensionx.
ENDFORM. " F_MOVE_HEAD_EXT
*& Form F_MOVE_ITEM_EXT
* Item Extension
4)
FORM f_move_item_ext .
* Structure for BAPI parameter Extension
wg_extension-structure = c_ext_vbap.
wg_ext_vbap-posnr = g_itmnumber.
wg_ext_vbap-zzsteady_date = wg_process-zzsteady_date . "Amortization Start Date
wg_ext_vbap-zzsteady_end_dat = wg_process-zzsteady_end_dat. "Amortization Stop Date
wg_ext_vbap-zzlegal = wg_process-zzlegal. "Legal Contract
wg_extension+30 = wg_ext_vbap.
APPEND wg_extension to i_extension.
* Structure for BAPI parameter Extension - Update Indicator Fields
wg_extensionx-structure = c_ext_vbapx.
wg_ext_vbapx-posnr = g_itmnumber.
wg_ext_vbapx-zzsteady_date = c_set .
wg_ext_vbapx-zzsteady_end_dat = c_set.
* wg_ext_vbapx-zzlegal = c_set.
*wg_process-zzfv_sbcnt = c_set.
wg_extensionx+30 = wg_ext_vbapx.
APPEND wg_extensionx TO i_extensionx.
CLEAR wg_extensionx.
and bapi calling is like below.
CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
EXPORTING
sales_header_in = wg_header
sales_header_inx = wg_headerx
logic_switch = wg_logic_switch
business_object = fp_bus_obj
status_buffer_refresh = 'X'
IMPORTING
salesdocument_ex = g_sorder
TABLES
return = i_return
sales_items_in = i_item
sales_items_inx = i_itemx
sales_partners = i_partner
sales_conditions_in = i_cond
sales_conditions_inx = i_condx
sales_text = i_text
extensionin = i_extension
extensionex = i_extensionx.
still we are not getting ZZFV_SBCNT value in VBKD table w.r.t created salesdoc(g_sorder)
Please help me from this issue.
Thank You..Hi,
Please let me know how to add custom fields in the characteristic list, My clients wants department and profit center grouping.
Please tell me how to solve it..
Thanks & Regards,
Reena..
Maybe you are looking for
-
Error writing metadata to file
I am getting constant error messages from Bridge CS4 when trying to add keywords to my images "Error Writing Metadata to file "XXXX". It's very annoying and destroying my workflow. I have tried resetting original preferences, and using purge cashe. F
-
Calling Stored Procedure with a DATE input parameter
Hi. A question about Date input parameters when calling a stored procedure... I have a procedure that takes a DATE parameter as input. I would like that DATE value to include a Time element. My Application Module method takes an input parameter as ja
-
Trying to upgrade iPhoto library
I'm trying to up prepare a v7 iphoto library for use in iphoto v9.5.1. When I try open it I get an error message that says "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Librar
-
Reg: Smartforms Table Painter
Hi Folks, In the smart forms in the main window I have used table for printing data of the internal table. Also for giving the borders in the table I have used the framed patterns in the table. So I have declared the main window sizes same as paper
-
Can someone explain the message about replacing songs when importing a CD?
If this is somewhere, I have not been able to find the answer. When importing a CD, sometimes I get a message that asks if I want to replace existing songs. Can someone explain what this message means? I have tried replacing the songs and not replaci