How to add custom parameters in LDB.

Hi,
i have to add my own parameters for e.g. plant in standard report RFUMSV00.
This report uses LDB 'BRF'.
How it is possible.
if i have to make Z report then also plz tell me in details.
its urgent.
Regrds,
Santosh.

Hi santosh,
You can add any parameter at the end of the LDB selection screen, by declaring parameters in your custom report.
In the attributes, define the name of the LDB you want to use.
Regards,
Jayant

Similar Messages

How to Add custom Attribute in XML

How to add Custom attribute recusrivly. With sequence order.
//Before xml:-
var myxml:XML=
<root>
<leval0 >
<leval1 >
<leval2></leval2>
<leval2></leval2>
</leval1>
<leval1 >
<leval2></leval2>
<leval2></leval2>
</leval1>
</leval0>
</root>
////After xml:
var myxml:XML=
<root>
<leval0 levalid="0" >
<leval1 levalid="0_0" >
<leval2 levalid="0_0_0"></leval2>
<leval2 levalid="0_0_1"></leval2>
</leval1>
<leval1 levalid="0_1" >
<leval2 levalid="0_1_0"></leval2>
<leval2 levalid="0_1_1"></leval2>
</leval1>
</leval0>
</root>

//call this method
            trace(addAttribute(myxml));
//method
            private function addAttribute(node:XML, depth:String = ""):XML
                if (node.hasComplexContent())
                    var count:int = 0;
                    var prefix:String = 0 < depth.length ? depth + "_" : "";
                    var currentAtt:String;
                    for each (var nodeItem:XML in node.children())
                        currentAtt = prefix + count;
                        nodeItem.@levalid = currentAtt;
                        addAttribute(nodeItem,currentAtt);
                        count++;
                return node;

Office 365 - sharepoint: In Advanced search Page, How to add custom column under property restrictions

In Advanced search Page, How to add custom column under property restrictions?

Hi,
The Navigation control can be added into your HTML page in the Snippet Gallery:
The two links below about how to create HTML master page and adding snippets needed into it for your reference:
http://borderingdotnet.blogspot.jp/2012/12/how-to-create-html-masterpage-for.html
http://msdn.microsoft.com/en-us/library/office/jj822370(v=office.15).aspx
Feel free to reply if there still any question.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to add Custom Relationship in MSS Employee Search Drop down

Dear Sap Fans,
I would like to link Custom Drop down link at following path.
Manager Self-Service->Team->Employee Information->General Information->Employee Selection
Drop Down 1. Direct Reports
          2. Employee from Organization Structure
          3. Employee from Organization Units
          4. Who's Who
We would like to add one more custom drop down. Can any one suggest how to add custom drop down in this list ? We have created custom relationship in R/3 but it is not showing in Portal.
Your prompt reply highly appreciated and points will be rewarded.
Regards,
Ashish Brahmbhatt

Barin,
I have done settings in back end. I have created new realtionship for evaluation path. I am not able to see that link on portal. How/From Where I can use object and data provider tool and eventing for config ?
rds,
Aashish

How to add customer group(KNVV-KDGRP)in the standard report?

Dear All,
My customer requirment is that Customer group (KNVV-KDGRP)wise should be run in FBL5N report AND Customer group should be shown in FBL3N report.
how to add customer group in the standard report?
thanking you,
regards,
Rupang shah

Hi,
This is what I did for FBL5N with a developer because additional fields configuration does include certain tables.
BTE1650 available for FBL5N and add a new field into one of those tables as an append structure and then use a BTE to populate the field for FBL5N.
Hope that this helps
Kind regards

How to add custom Template transaction types ( for Quote ) ?

How to add custom template in transaction types?
Note : I have gone through below note. But not getting appropriate solution for this.
982142.1 (OM Sales Order Template Not Available In Layout Template LOV For Print&Preview)
444687.1 (OM Quote Template Not Available In Layout Template LOV for Print And Preview)
Thanks in advance..
Sameer

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

How to add customized payslip in the place of standered payslip.

Dear Experts,
We have implementing ESS/MSS, how to add customized payslip( Zprograme) in the place of standered payslip and how do we can get pay slip under ESS from portal.
Thanks in advance.
Regards,
Mahee.

If you have developed your own SMARTFORM Payslip and a custom program to display it, then there is not much you can do with standard configuration.
Steps provided by Siddhart will call a custom HRFORMS payslip in a standardv way, or convert a PE51 payslip to SMARTFORMS pdf and display in a standard way.
You have to work with your Portal Consultant and/or ESS/MSS consultant and ABAP/Webdynpro Programmer for this one.
One suggested appraoch is
1) Create A Webdynpro programme which launches when Employee clicks on Payslip link
2) This program passes the employee user id to an ABAP program in ECC
3) ABAP Program calls the custom payslip program already developed and generates the payslip and passes it to the webdynpro program as a binary file.
4) Webdynpro program displays payslip as pdf file.
this Webdynpro program has a PCD URL. A resource is created and assigned this PCD URL.. Homepage customizing is done - this resource is assigned to the Payslip service which is assigned to the Payslip Subarea.
Hope this helps. We actually used this approach briefly long back before switching to HRFORMS, so I know it will work, but I have obviously provided very high level here. Hope you can do something with this.
Edited by: Harish T K on Feb 2, 2011 4:23 PM

How to pass custom parameters to the Notification message body in a process

Hi All,
We are migrating from ORACLE workflows to Oracle OWB process flows as part of upgrade to Oracle 11g R2. Earlier in workflow notification mesages we could attach custom attributes (eg X_NAME) and reference the custom attributes in the notification message body (&X_NAME) to dynamically build the message body as per the custom attribute values.
I tried to add a cutom parameter X_EMAIL_ID to a OWB process notification activity and trying to pass it to the notification message body by giving the value "This message is from &X_EMAIL_ID" in TEXT_BODY. But when I get the notification message it shows only "This message is from" and it does not show anything about X_EMAIL_ID.
Please advise Please help us if anyone have used any workaround to dynamically populate the TEXT_BODY in a notification activity based on custom parameters.
Thanks and regards,
Shankar

Hi David,
Thank you for your suggestions. When I try to bind the variable to the notification activity parameter TEXT_BODY I get this error - VLD-10035: The value of parameter TEXT_BODY in a NOTIFICATION activity must be a literal value, bindings or expressions are not allowed. It looks like the text_body can have only literal values. Could you please advise if you received any such error or how could you resolve them.
Thanks and regards,
Shankar

How to add Custom button to existing ALV toolbar

Hi,
I want to add custom buttons for varaints in the existing row PRINT VERSION/EXPORT
How do we do that?
Rgds
Vara

I have used the standard component u2018salv_wd_tableu2019 in my application and will be able to give example by adding a button named 'NEW__BUTTON' .
In the WDDOINIT method of the component controller, use the following code to define column name, your own buttons, visible column for the same component usage.
DATA:
lr_salv_wd_table_usage TYPE REF TO if_wd_component_usage,
lr_salv_wd_table TYPE REF TO iwci_salv_wd_table.
*Check ALV component usage
lr_salv_wd_table_usage = wd_this->wd_cpuse_alv( ).
IF lr_salv_wd_table_usage->has_active_component( ) IS INITIAL.
lr_salv_wd_table_usage->create_component( ).
ELSE.
lr_salv_wd_table_usage->delete_component( ).
lr_salv_wd_table_usage->create_component( ).
ENDIF.
*Get ALV component
lr_salv_wd_table = wd_this->wd_cpifc_alv( ).
wd_this->mr_table type ref to CL_SALV_WD_CONFIG_TABLE.
*Get ConfigurationModel from ALV Component
wd_this->mr_table = lr_salv_wd_table->get_model( ).
*Set table settings
DATA:
lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= wd_this->mr_table .
lr_table_settings->set_visible_row_count( '5' ).
lr_table_settings->set_width( '100%' ).
DATA:
lr_header TYPE REF TO cl_salv_wd_header,
l_header_text TYPE string.
lr_header = lr_table_settings->get_header( ).
l_header_text = cl_wd_utilities=>get_otr_text_by_alias( 'NEW__BUTTON' ).
lr_header->set_text( l_header_text ).
lr_header->set_tooltip( l_header_text ).
"lr_table_settings->set_selection_mode( cl_wd_table=>e_selection_mode-multi_no_lead ).
*Set functions
IF wd_this->mb_no_maintain NE abap_true.
DATA:
lr_function TYPE REF TO cl_salv_wd_function,
lr_fe_button TYPE REF TO cl_salv_wd_fe_button,
l_btn_text TYPE string.
*Add the button here for validation on the top of the ALV
*This is where you add the buttons on the same ROW.
lr_function = lr_functions->create_function( 'NEW__BUTTON' ).
CREATE OBJECT lr_fe_button.
l_btn_text = cl_wd_utilities=>get_otr_text_by_alias( 'NEW__BUTTON' ).
lr_fe_button->set_text( l_btn_text ).
lr_fe_button->set_tooltip( l_btn_text ).
lr_function->set_editor( lr_fe_button ).
After defining the buttons 'NEW__BUTTON' , handle the actions for the same using the method u2018LIST_ACTIONu2019 which should have the event as u2018ON_FUNCTIONu2019, controller as u2018interface controlleru2019 and component use as the name you have given say u2018ALVu2019.
In the method u2018LIST_ACTIONu2019, handle the actions as below. This method will have the following importing parameters.
WDEVENT Importing CL_WD_CUSTOM_EVENT
R_PARAM Importing IF_SALV_WD_TABLE_FUNCTION
method list_action .
case r_param->id .
when 'NEW__BUTTON'.
"Do the validation here-"
endcase.
endmethod.
Thanks,
Rajkumar.S

How to add custom fields in BADI Subscreen.

Hi Friends,
I have to include some custom fields in MFBF tcode.(In make-to-order tab page).
To do that I have used RM_HR_INTEGRATION BADI definition and created implementation for this. In the provided subscreen I tried to add custom fields but it asks access key . I donu2019t know , how to proceed further. Your help is needed.
Or kindly provide me solution to achieve my requirement.
Thanks in Advance,
senthil.

Hi Venky,
We can see the documentation in
se18 -> badi -> LE_SHP_TAB_CUST_HEAD -> display -> documentation button above the definition name
in the first pop-up of documentation..go to the end which says 'Further notes'
Further notes
Documentation on BAdI Interface LE_SHP_TAB_CUST_HEAD
click on this and we have a detailed description of each method defined in the badi
Hope it helps
Regards
Byju

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

How to add Custom Attributes in the SOAP header for OWSM

Hi,
I like to know how to add the Custom Attributes in the SOAP header for OSWM username token authentication.
Currently we are getting the header element like
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
here we need to add the attribute "soap:mustUnderstand="1" , so the element will look like
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
Any info on this will be helpful.
Thanks,
ArunM

Hi Jay, you can make it in more than 1 way.
I suggest you the following:
- create an URL iview that points to any URL you want.
- define a Resource that points to the iview (with a window name, to open in new window)
- define an Area that points to the resource
- add your new Area to the your current Area Group
Regards!

How to add Custom code in Report Painter

Hi All,
I have a requirement to add Authorization checks at Profit Center Level for 8A-PCA001G report. This is the first time am working on Report Painter/Writer. I am wondering whether i can add custom code or not. Please suggest me how to do this. I copied 8A-PCA001G into a zreport but did not find anywhere to add custom code.
Any help would be really appreciated.
Thanks,
Kumar

Hi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM

How to add Customer Specific Product ID PRID_VENDOR to product with report

CRM5.0
Hi,
I am trying to find out, how to add the customer specific product ID (product->relationships->customers) to a product with a report or a function module.
It is stored in table COMM_IL_PRDCPN, data element COMT_PRID_VENDOR.
Is there a class/method, function module, or some example coding, how I can do that?
Thanks an regards,
Thomas

Hi,
I don't think in Std it is possible to create CMIR in VD51 for cust.grp..
u can try LSMW to create CMIR for sold-tos..
Reg,
JJ

How to add custom field to ical

Hi
I run a small business from my mac pro and my iphone. I would like to get a good workflow but it seems I am missing a few bits of information.
First I would like to add custom fields to ical so that I can gather all the information I need in one spot. For example, I create a meeting with new client Tim Smith on Friday so I want to enter his name and contact info into ical because I need his address and phone number on the event so I can reference it.
Then I would like to find a way to automatically create a contact card based on that information. If I can find an apple script that reads the fields in Ical and creates new contacts based on new events that I created.
Then I would like to automate extracting the email addresses to send out preformed group mailers for people who were in my calendar that day ie "Thanks for meeting with me, I think we got a lot accomplished and hope to see you at the next meeting." etc etc
Then also automate reports based off of my ical events such as "Report for how many times I had a meeting in the Blue Room this week" or "How many times did I meet with Timothy Smith" this year
I have tried automator and it doesn't seem strong enough to do this so I am thinking AppleScript but I am not very good at it. Anyone have any ideas on any of these issues?

Tried the iCal forum and support
www.apple.com/support/ical
Tried Lion Community?
you have notebook and tower?
www.apple.com/support/macbookpro

How to add custom parameters in LDB.

Similar Messages

Maybe you are looking for