How to add custom ringtones on new iPhone 5, using iTunes 11.04 on Mac OS 10.7.5

how do I add custom ringtones on new iPhone 5, using iTunes 11.04 and Mac OS 10.7.5?

Are you meaning rintones that you create from existing files?
If so - then Google and you will get lots of hits on 'how to'.
Once you have the ringtones in your iTunes library then make sure in iTunes prefs>General tab - the Tones option is selected. Once your device shows in the Devices list make sure you select from the Tones tab in the Devices window the tones you want to d/l.
MJ

Similar Messages

How do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

how do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

How have you managed to get apps on your phone that are tied to a different and unknown AppleID?
If these apps were not purchased by you, having them is effectively software piracy and you should purchase them using your own AppleID if you want to keep hem.

How can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

how can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone.

How do I get custom ringtone off my iPhone and into iTunes

I recently reformatted my laptop and now I need to get my ringtones off my iphone and into itunes so I can back them up but when i check sync tones, iTunes is telling me it will erase all tones on my iPhone 4 and replace with tones on current iTunes library (and there are no tones on current iTunes library.) Is there a way to save my ringtones that Ive created that are only on my iPhone?

Bump? Does anyone have any words of wisdom?

How to create custom Ringtones (m4r files) from Songs in iTunes

Jakarta, 14 June 2013
On Mac OS : 10.7.5 (Lion)
On iTunes : 11.0.4
Difficulty : intermediate - hard
Assuming you know basic Ctrl+Click and Option+Drag...
Full correct steps should be like this :
1) Select a favourite song in iTunes program to be made into Ringtone...
2) "Get Info" on that song name and make any 0:30 seconds portion of that song....
(specify "Start" & "Stop" time - under "Options" – to any 30-seconds duration and click OK)
3) Right-click or Ctrl-Click again on same song name and select "Create AAC Version" to create an .m4a file...
(when done iTunes will create a Chime)
4) to locate the created .m4a file easily, Ctrl-Click again on same song name and select "Show in Finder" from the pop-up list...
(iTunes will automatically point the folder location of the original .mp3 & the newly created .m4a files... keep this window open for later...)
5) change the .m4a file to .m4r as suggested...
(rename to whatever you like but you must change the extension to .m4r)
6) At this point, the m4r(original) file isn't a "Ringtone" file yet... which we'll need to change now...)
(check under "Get Info" > "Kind" : it's still "Apple MPEG-4 Audio")
...1st by dragging that newly changed .m4r(ori) file to somewhere out of that same default folder it was created by iTunes...
{ this is where most confusions occur, take note here, it gets rather complicated }
7) Once it's outside of that folder, Double Click the m4r(ori) file and iTunes will play...
(u can stop it immediately...) this is just to let iTunes automatically convert that m4r(ori) file into a new duplicate & places it inside the initial default folder where the original .mp3 file is kept... we kept the window open previously, remember?
8) Locate that duplicate .m4r(new & true) file, in that same .mp3 folder and now DUPLICATE-Drag (press Option while dragging to get the "+" sign) it to the "TONES" folder in your default apple folder structure. (check under "Get Info", this .m4r(new) File's "Kind" should be "Ringtone")
//to get to that "TONES" Folder : First Locate your iTunes default Music Folder in your Mac --> usually it's in your Default "MUSIC" folder --> Navigate to "iTunes Media" --> Navigate to "Tones". !! Keep this window open to make the transfer manually !!
9) Once your duplicate is placed inside the "Tones" folder, double-click on that duplicate .m4r(true) file and let iTunes play, it should automatically place that ringtone file into the "Ringtone" sidebar List in the iTunes program... (check program to see)
Somehow u needed both duplicates : 1 – inside the default initial .mp3 folder & 1 – inside the Tones Folder which we Duplicate+Drag into... and both must be "Ringtone" – Kind... for this to work.
10) There you go. Now you can Sync / Delete / Add the whole Ringtone contents to your iPhone as you wish.
//Don't forget to set SYNC ON under the iphone "Tones" tab in your iTunes - iPhone screen... and click big SYNC button at the bottom of iTunes program & wait for the magic.
( Finally you can check inside your iPhone "Sounds" settings and hopefully if all steps done correctly, the bloodycomplicatedringtone selection will be there. Enjoy!

Hi --
I'm using iTunes 11.0.4 on OSX 10.8.4 and am having a hard time following your instructions to create a ringtone from a snippet of a .mp3 file using iTunes:
1) Select a favourite song in iTunes program to be made into Ringtone... CHECK!
2) "Get Info" on that song name and make any 0:30 seconds portion of that song.... CHECK !
3) Right-click or Ctrl-Click again on same song name and select "Create AAC Version" to create an .m4a file... PROBLEM!
It's when I hit Step 3 that I have a problem -- my "right click menu" at that point looks like this:
There's no option to "create AAC version." Nor does this option appear anywhere in iTunes that I can find.
It really shouldn't be this confusing to create a freaking ringtone. HELP PLEASE!

How to add custom ringtone to my contacts in CM10.2 in neo V

Hi --
I want to add ringtone from my music files into the specific contacts. When I try to do it only shows the default ringtone and I am not able to view the files from Music. I am using CynogenMod 10.2 ( Jelly bean 4.3) on my xperia neo v.
Topic edit by Rickard

Any help on this is greatly appreciated.

How long should you charge your new iPhone before using?

How long should I charge my phone before using?

There is no required charging time. Use it and charge it when its convenient.
You should however not let it drop below 20% charge too often. Once a month is suggested to re-calibrate the battery meter.
Other than that charge and use as you like.

How do I transfer CD tracks to iphone 5 using itunes?

I'Ve recently imported a track from a CD into itunes using Windows 8 and a PC... now how would I transfer that CD track to my iphone 5?

If the track is in an iOS compatible format, it should transfer over during the next sync.

How can i store music on my iPhone and use iTunes match?

I signed up for Itunes match but found the streaming music uses a lot of data and is too expensive. I then put the music back on my iphone but found that enabling itunes match will delete the music on my phone. Is there anyway to keep the music on my iphone and also connect to itunes match?

Thank you so much for the response. This half sorts out my issue, as turning off Musicmatch means I can load music onto my iPad, but the minute I turn it back on to access my library whilst travelling I will lose what I have loaded as it comes up saying " all music will be erased".
I really apprecaite your time, so will just have to live with what I load. Seems weird that Apple wouldn't consider people want to listen to music on planes or in Non - wifi zones??
Thanks again!

How do you delete songs on your iPhone without using iTunes on your computer? Swiping to the left or right won't work on mine.

I've tried deleting my songs but it didn't work. It worked last time. Sliding it wont work anymore. I've spent hours trying to figure out how to delete songs.

Swiping left to right or right to left should work if you're in the right place.
For example, try it in Music > Songs (button in lower right).

HT4623 How do I add a ringtone to my iPhone without synching to all of iTunes

How do I add a ringtone to my iPhone without synching to all of iTunes? I have an enormous music library and do not want to add music to my phone. I checked the handle manually button, but it says it's going to erase everything on phone!? I cannot drag into Library from iTunes either. Help!

If it is a new computer and you have not hooked you phone up, then it is NOT the same library you were syncing the phone with previously.
You can only sync with ONE iTunes library at a time. You will have to let it wipe the media from the phone and re-sync any music, ringtones, etc. to it.
Hopefully, you copied your music and other media from your old computer to the new one already.

How to make custom ringtones in iOS 5.1

How to make custom ringtones in iOS 5.1.
I was on iOS 4.3 before and i used to create the AAC version and then change the file extension & that file would come up in the Rimtones in iTunes, After the iOS 5.1 i m unable to add the custom ringtones to my iPhone from iTunes.

Was having this problem too. Discoverd that that there is a "tones" top menu next to "music" under your iphone settings. I'm not sure if this is new or not (I am a new iphone owner), but if you check on sync tones they will download.

I need to transfer playlists from my old iphone into itunes so that I can then add them to my new iphone 6. However, none of the playlists on my iphone appear when I connect to my macbook. I have read other threads but have not found answer. help!

I am a group exercise instructor and rely heavily on my playlists. My old phone is an iphone 4s and I just bought an Iphone 6. I also have a macbook where I keep my itunes account, but I create all my playlists on my phone. I need to transfer those playlists from my old iphone into itunes in my computer so that I can then add them to my new iphone 6. However, none of the playlists on my iphone appear when I connect to my macbook. I have read other threads where the suggestion was to attach the old phone to itunes, find the phone in itunes and click the little arrow to the left to show the playlists. Then right click on the playlist and export it, saving it to the desktop, to then import it into itunes. However, in my case, the playlists do not show up when the phone is connected to itunes. I have clicked on the little arrow and all I get is "music", "purchased", etc., but none of my playlists. I'm sure some years back I probably deleted something in my itunes library and now none of my playlists show. Please help me. I would hate to have to recreate all of my playlists. Thank you!

I know it sounds weird, and that is the reason I posted my question. Because my case is not like all the ones I've found online and it's confusing. I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
My playlists "ARE" in my iphone 4s. They are still there even though they do not show up when I plug in to itunes in my computer.
When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes. I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes: Music, Movies, TV shows, books. That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS" but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone. Under "90's music" there are also other standard playlists that itunes automatically adds.
Does anyone else have this issue or know how to get around this. I am starting to think that I am going to have to recreate these lists on my computer

How to add Custom Relationship in MSS Employee Search Drop down

Dear Sap Fans,
I would like to link Custom Drop down link at following path.
Manager Self-Service->Team->Employee Information->General Information->Employee Selection
Drop Down 1. Direct Reports
          2. Employee from Organization Structure
          3. Employee from Organization Units
          4. Who's Who
We would like to add one more custom drop down. Can any one suggest how to add custom drop down in this list ? We have created custom relationship in R/3 but it is not showing in Portal.
Your prompt reply highly appreciated and points will be rewarded.
Regards,
Ashish Brahmbhatt

Barin,
I have done settings in back end. I have created new realtionship for evaluation path. I am not able to see that link on portal. How/From Where I can use object and data provider tool and eventing for config ?
rds,
Aashish

How to add customer group(KNVV-KDGRP)in the standard report?

Dear All,
My customer requirment is that Customer group (KNVV-KDGRP)wise should be run in FBL5N report AND Customer group should be shown in FBL3N report.
how to add customer group in the standard report?
thanking you,
regards,
Rupang shah

Hi,
This is what I did for FBL5N with a developer because additional fields configuration does include certain tables.
BTE1650 available for FBL5N and add a new field into one of those tables as an append structure and then use a BTE to populate the field for FBL5N.
Hope that this helps
Kind regards

How to add custom ringtones on new iPhone 5, using iTunes 11.04 on Mac OS 10.7.5

Similar Messages

Maybe you are looking for