How to add data to custom dropdown in E-REC BSP Application:HRRCF_REQ_MNT

We have added a custom dropdown field in E-recruitment. The BSP application is: HRRCF_REQ_MNT. Now i need to assign values to that dropdown through HRRCF_REQ_MNT. Any suggestion where that dropdown will be defined because i dont see it in the layout for that particular bsp page. I only see the standard dropdown fields.
Any suggestion will be appreciated.
Thanks

Hello,
you can do it much easier than modifiing.
You can add a dropdown by customer include into the e-recruiting infotypes.
If you want to have the dropdown in the basic data, create a customer include in infotype hrp5125.
If you want it below job data then create it in infotype hrp5126.
If you assign values to the domain of your customer field or add a searchhelp into the customer include structure, the drop down will be automatically be filled.

Similar Messages

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer.

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer. I am using Windows XP home edition. The Custom option itself is not appearing in the process of selecting paper sizes in Printing preferences. I have installed this printer just today, but I bought it eight months back in Dubai. Could there be chance that since I purchased it in Dubai and I am using it in India, the software's not functioning properly.
Can you please help me with this problem immediately? Reply soon...

Hi RajeshPujara,
Please refer the link below to know the paper size supported by this printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02231304&tmp_task=prodinfoCategory&cc=us&dlc=en...
May I know the size of paper you are trying to print.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to add a new custome tabs in 11.5.10 to Home Page

Hi All
can any one tell me how to add a new custom tab(top level menu tab) along with an exsiting standard tabs in 11.5.10 home page.
Thanks in Advance
Vikram

Query for your responsibility in Oracle Apps., and grab the Menu attached to it.
Query for this menu in Oracle Apps, can view its sub-menus and page functions attached. You can also view the hierarchy tree.
Now in this tree, position your new menu (that you want to create). Query to the parent menu (to which you want this new menu to be a child of) and create the new menu into it. Attach the page function/sub-menu to your new menu.
For a better understanding, look into the section "Implementing the View" (Menus and Page Security part) of the Dev. Guide.

How to add date with month after convert number to month?

How to add date with month after convert number to month?
Month Date Result
24 21/11/09 24*(21/11/09)
I want to add both the column and result should be 21/11/11
Thanks
Nihar

Hmm,
Because, you are using YYYY for '09'.
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/RRRR'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/2009
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/YYYY'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/0009Or with Add_months
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/YYYY'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/0012
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/RRRR'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/2012-Arun

How to add a PDF to the Help button of the Application? Do we need a Robohelp to generate this?

How to add a PDF to the Help button of the Application? Do we need a Robohelp to generate this?

Thank you for your reply, William.
Well, we just want the PDF to open when we click on the “Help” link of the Application.
Also, we have the PDF ready.
Is it a job of a UI Developer? Do we need to tell him to link this PDF to the Help button or link of the Application?

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

How to add data in xml file

Hi ALL
I want to add new fields on seeded EBS page to store their values in hr_api_transaction table whoch contain information of other fields on that page which are seeded
but that table has one column which stores xml file and that xml file has all information about that page's fields
how can I store my custom fields values in that xml file ?

Hi,
As Andy said, add data to an xml file is overwriting, if you mean append data to xml file, please look this article:
http://codesamplez.com/programming/linq-to-xml-tutorial, Since this issue is more related to ASP.net, you could also ask this issue in asp.net forum:
http://forums.asp.net/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to add data in a file

hi,
I have written following code.I have a file. i want to add data in this file.
When i add data then data is added but i donnot get the previous data. What`s the problem of my code? Is there anyone can help me? how i will add data with the previous data? Please help me.
String username=request.getParameter("UserName");
String userage=request.getParameter("UserAge");
String address=request.getParameter("UserAddress");
String sex=request.getParameter("sex");
FileWriter f = new FileWriter("d:\\download_dreamweaver\\Project_3\\WebContent\\SaveData.txt");
f.append(username);
f.close(); ith regards
bina

Looks like you're creating a new file (which overwrites the old one) every time. You need to open the file first and then append to it.

How to add date in XSLT?

All,
soa version: 11.1.1.4
There is a requirement for me to add date to the current date in XSLT. I searched in 'Data functions', there I couldn't find any pre-defined functions. How do I achieve it in XSLT? Any help is appreciated.
thanks
sen

Hi Sen,
You can do this using the below:
<xsl:value-of select="xp20:add-dayTimeDuration-to-dateTime(xp20:current-dateTime(),'P1D')"/>
You can change the P1D based on the number of days you want to add.
For example 3 days = P3D
Thanks,
Deepak.

IDOC :: how to send data from Custom Infotype in SAP HR to third party

Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                ZTALENT                        Talent Management
5 E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP                        HR: Transported Infotypes and Subtypes for an Object
ZPUSER                         User base Data File
                ZPERSON                        Personal Information File Segment
                ZPOST                          Position File
                ZOPE                           Overall Performance
                ZPWORK                         Outside Work Experience
                ZPEDUC                         Education Details of Employee
                E1P0000                        HR: HR Master Record Infotype 0000 (Actions)
                E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)
                E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)
                E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)
                E1P0022                        HR Master Record: Infotype 0022 (Education)
                E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)
                E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)
                E1P0105                        HR: HR Master Record Infotype 0105 (Communications)
               ZE1P9020
                ZPLANG                         Language Details
                ZACTION                        Actions Changes
Regards,
Krishna

Hello Shankar,
         Technically TEMSE files are read by calling the following 3 function modules in sequence,
              1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
              2) RSTS_READ : read the object
              3) RSTS_CLOSE: close the object
Regards,
Rajesh

How to add data into JTable

How can I add data into JTable, for instance ("Mike", "Gooler", 21).

How can I add data into JTable, for instance ("Mike",
"Gooler", 21).You will have very good results if you segregate out the table model as a seperate user class and provide a method to add a row there. In fact, if you use the table to reflect a database table you can add the row inplace using the existing cursor. I believe it's TableExample2 in the jdk\demo\jfc\TableExamples that has a very good example of this.
Walt

How to add data

hi everyone ! i have created a view object based on 2 entities objects (EMP and Departaments of hr schema)
but i have also modified the sql query of the view in this way :
SELECT Employees.EMPLOYEE_ID,
Employees.FIRST_NAME,
Employees.LAST_NAME,
Employees.DEPARTMENT_ID,
Departments.DEPARTMENT_NAME,
Departments.DEPARTMENT_ID AS DEPARTMENT_ID1
FROM EMPLOYEES Employees ,DEPARTMENTS Departments
where Employees.DEPARTMENT_ID(+) = Departments.DEPARTMENT_ID
and i have created a tables based on this view object..... in this table are shown those empl. that doesnt have departaments.... what i want to do is how can i add data to those rows wich doesnt have employess but have departaments???
Thanks in advance :)

Hi,
I think you can resolve that problem using EL expression condition, try the following in your table:
<af:table ...>
<af:column headerText="#{bindings.EmployeeDepartment.labels.FirstName}"
binding="#{backing_EmployeeDepartment.column2}" id="column2">
<af:outputText value="#{row.FirstName!=null? row.FirstName: 'No Emp Found'}"
binding="#{backing_EmpDept.outputText2}"
id="outputText2"/>
</af:column>
</af:table>
Regards,
Ahmad Esbita

How to add data in related issue field in issue tracking list sharepoint 2013

Hi,
I'm using out of box Issue Tracking List. In Related Issue I want to add some data like :- Business, Technical, HR, Contractor etc in right side so user can select one of them add it. Not sure how to add these data in Related Issue column. Please advice.

Related Issues is a lookup column to the same list which is Issue Tracking List. so you can add new items where title is Business, Technical, HR, Contractor etc then you will get those under related issues.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Script task how to add date value

hi
i have following code i am trying to add date into script task
Public Overrides Sub CreateNewOutputRows()
Dim vars As IDTSVariables100
Dim vars1 As IDTSVariable100
Dim recordCount As Integer
Dim rdate As Date
' Dim recount As Integer
' Dim rcount As Integer = 0
'Get the record count
Me.VariableDispenser.LockOneForRead("RecordCount", vars)
recordCount = CType(vars("RecordCount").Value, Integer)
' rdate = CType(vars("CurentDate").Value, Date)
vars.Unlock()
Me.VariableDispenser.LockOneForRead("CurrentDate", vars)
rdate = CType(vars("CurrrentDate").Value, Date)
' rdate = CType(vars("CurentDate").Value, Date)
vars.Unlock()
'Me.VariableDispenser.LockOneForRead("rcount", vars)
'rcount = CType(vars("rcount").Value, Integer)
'vars.Unlock()
' rcount = rcount + 1
'Output one row with record count
Output0Buffer.AddRow()
Output0Buffer.FooterRow = String.Format("ABC" & recordCount & rdate)
Output0Buffer.SetEndOfRowset()
in SSIS i have declare CurrentDate in datetime and i need to use it here , but i am getting error.
how to append its value to Output0Buffer.FooterRow = String.Format("ABC" & recordCount & rdate)
its in vb ,i dotn know anything about VB ,please help me.
i havent put anything in readonly,readwrite in script task.ecordCount is working but i did same for rdate and its not working

how to get that value in yyyymmddhhmmss format in ssis.
whats expression i need to use.
also how to give single space here between recordcount and variables.rdate
Output0Buffer.FooterRow = String.Format("ABC" & recordCount & Variables.rdate)

How to add data to custom dropdown in E-REC BSP Application:HRRCF_REQ_MNT

Similar Messages

Maybe you are looking for