How to add details of absences in absences Infotype 2001 for previous dates

Hi Experts...
In my clients company.... one of Personnel subareas employees leave records are not updating in
2001 Infotype.
Now they wish to have to update in 2001 Infotype.
What is the implication for this new changes in absences records.
What are the different methods to upload these absence data to the employees.
How can we upload these data with in a short span time.
Please advice.
Thanking you.
Regards,
sai

HI Dilek....
Thanks for the reply.
Here it s not possible to change payroll period every time.
As because the employees leave records are there from year 2007 in different months.
I will put the status as Release dfor correction.
What changes to be done with payroll status infotype.
there is no need of running retro for the above changes we made.
What could be the optimum solution.
Regards,
Sai.

Similar Messages

Absence amount in infotype 2001 without taking wrok schedule into account

Hello
We are using CATS. For the purpose of available hours of an employee only the total of a week is needed. So for instance 25 h/week. We set up a week workschedule 25h/week with day schedule of 5 hours per day (hours evenly spread over the 25 hour week). However, I run into the problem that when I want to enter a leave in infotype 2001 for a certain day only 5 hours is allowed. But I need/want to enter 8 hours in infotype 2001 (user works 8, 8, 4, 5, 0).
If it works in infotype 2001 then it will also work in CAT2 and CAT6. Can anyone explain me how to set this up. I checked the following:
V_001P_D- Group Personnel Subareas for Attendances and Absences
V_T554S-Define Absence Types
V_554S_O - Determine Entry Screens and Time Constraint Classes
V_T551C - Define Counting Classes for the Period Work Schedule
V_503_E -Group Employee Subgroups for Time Quotas
V_001P_I - Group Personnel Subareas for Time Quotas
V_556R_B- Deduction rules for absence quotas
T556C- Counting rule
V_554S_Q - Assign Counting Rules to Absence Types
V_554Y_B and table V_T554Y
But I got lost somewhere in the tables above, the entries seem fine. I thought I had it with table V_554S_O where I set the availability on 9, but that did not help. The field "whole day" (P2001-ALLDF) is grayed out next to the field number of absence hours (P2001-STDAZ). We only us HR for CATS purposes.
I think I'm overlooking something for a particular setting in one of the above tables? I'm not an HR consultant so .... tabel V_556R_B is a very cryptic one for me. Further in table T556C I checked and unchecked "Work according to daily work schedule", but still no effect, also other combinations..... Also this table T556C I do not understand....
What I only need is specfic settings so that I can enter more absence hours in 2001 then in the workschedule is permitted. No updates in any other infotypes are necessary. From the help documentation it seems possible, but I don't seem to get it working....
Thanks in advance.
Kind regards
Mirko
Edited by: Mirko Polisini on Feb 8, 2009 9:50 PM

Hello,
We need to implement HR as lean en mean as possible, so time evaluation is no issue. Just want to post 0190 (Leave) in infotype 2001, 8 hours for a workschedule day that for instance only has 5 hours. Else user needs to create 2 lines in CAT2, 5 hours and another on same day with 3 hours. During CAT6 I get the problem that the 3 hours cannot be posted, besides the fact that this workaround is very userunfriendly.
Hoping that setting up infotype 2003 is not necessary, makes just things more complex (HR is just a means to an end for using CATS). Does it mean that I then need to create and absence type that is attached to infotype 2003? How does it work?
Thanks in advance for your help.
Kind regards,
Mirko

HOW TO add a videos or movies to IPOD TOUCH for first time...

HOW TO add a videos or movies to IPOD TOUCH for first time...
pls send step by step detail wise.. if you have a video for this ..pls mail me...
my email : [email protected]
thanks to all

See:
iOS and iPod: Syncing photos using iTunes
iOS: Syncing with iTunes
iTunes: Frequently asked questions about viewing and syncing videos
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod

How to add a default value in a site column for every item in a document library

HI
i created a content type with some site columns ,
and included in a Document library.
Process ( content type)
-ProcessNo
-ProcessName
after that i uploaded 100 Documents but not added value in a site column process name.
now how i add a default value in a site column for every document in a document library
adil

HI
i get below error when i change the script
PS C:\scripts> C:\Scripts\updatedefaultvalue.ps1
Cannot index into a null array.
At C:\Scripts\updatedefaultvalue.ps1:8 char:7
+ IF($i[ <<<< "Title"] -eq $null)
+ CategoryInfo : InvalidOperation: (Title:String) [], RuntimeExce
ption
+ FullyQualifiedErrorId : NullArray
$web = Get-SPWeb http://tspmcwfe:89/
$list = $web.Lists["test"]
$item = $list.Items | Where { $_["Name"] -eq "Emc" }
foreach($i in $items)
IF($i["Title"] -eq $null)
$i["Title"] = "test"
$i.Update()
adil
Why are you piping a where in the items? Do you only want to add the "test" to ones matching
a name?
If you have ISE installed on your server I recommend you put your code in there and debug it.
If this is helpful please mark it so. Also if this solved your problem mark as answer.

How security is handled in HR-BW reporting? Specially for Payroll data.

Hi,
how security is handled in HR-BW reporting?
Specially for Payroll data, how security handled?
any Idea will be appriciated.
Thanks
Ali

Hi Guys,
any body has an Idea ! How security is handled in HR-BW reporting?
Specially for Payroll data.
any documentation etc....
Thanks
Ali

How to create a ABAP report off of SRM box for live data?

How to create a ABAP report off of SRM box for live data?
Thanks in advance.
York.

you can try infoset query:
STEP - A:
1. Go to T Code RSQ02 and give the InfoSet name & select CREATE.
2. Provide the Name(Description) and Data Source i.e. for eg here i take "DIRECT READ OF TABLE" = /BIC/AODS100. Then CONTINUE.
3. Select what to Include in the 3 options available with the POPUP, here "INCLUDE ALL TABLE FIELDS". Then Check the fields and click GENERATE(one RED and WHITE round icon).
4. Now provide the PACKAGE for the INFOSET. Come Back(F3).
STEP - B: optional(If u want to create a new user group)
1. Select ENVIRONMENT -> USER GROUPS. Provide the User Group name and CREATE.
2. Provide Description and SAVE.
3. Provide PACKAGE and SAVE. Come Back (F3) to the Initial Screen.
4. Click Role/User Group Assignment. Select Newly Created User Group or an existing one. Then SAVE (CTRL + S). F3.
STEP - C:
1. Select ENVIRONMENT -> Queries. Provide the query name and CREATE.
2. Select the INFOSET u have created and assigned the user group.
3. Provide the Title and Select BASIC LIST. There you have to select (check) the fields you want to display, SAVE and then TEST. It will ask for Variant, just CONTINUE.

ITunes U: how do I turn off the 50 MB download limit for mobile data connections?

Since I rarely have access to Wi-Fi networks I do actually want to download iTunes U content using mobile data. Videos (and even some slide decks) exceed the 50 MB limit that iTunes U will allow you to download over mobile data connections. How do I turn off the 50 MB download limit for mobile data connections?

You can't unless the phone is jailbroken (which in turn voids your warranty)

How tio restrict the generation of Calib.Maint Order for Previous dates

Dear PM Guru's
i required one restriction option to prevent the generation of calibration maintenance orders for previous dates.please under stand the full information in following example.
one of my gauge frequency was every 6months. for every 6months user wants one calibration order. in between these 6months frequency user checks the gauge for every 1month as a Inspection / verification of gauge. while uploading the data in SAP, user enters the dates 02.02.2011 as a start of cycle, but we upload the data in sap 02.05.2011. on 05.05.2011 we will go for live. here system should generate the order every month as 02.03.2011,02.04.2011,02.05.2011,02.06.2011,02.07.2011,02.08.2011. As per out condition 02.08.2011 has Inspection / verification and calibration remaining months are inspection / verification. Now here how i can restrict the order generation for 02.03.2011,02.04.2011,02.05.2011dates. Please give me the suggestion and solution to avoid the order generation. if i left same as it is somany orders should be generated.
please help me. thanks so much in advance to all PM gurus.
regards
PM

First method:
You can define offset in strategy so that first call will be created after the offset period (in your case, it is 4 months).
Second method:
You can define the start date of cycle as 02.05. instead of 02.02, as system is going live only by 05.05.

How to add detail disclosure regon programmatically ?

Hi all,
I need to add detail disclosure in a seeded page. there are PO lines in the page and the requirement is to add receipts information as hide/show.
What is step by step approach i need to follow? Any code samples to add detail disclosure via controller extension is highly appreciated.
Thanks.
Regards.
Ram

Hi ,
REfer the following code:
import oracle.apps.fnd.framework.webui.beans.layout.OADefaultHideShowBean;
processRequest(OAPageContext pageContext, OAWebBean webBean)
// Get a handle to the hideShow bean if this code is in a controller associated with
// a parent or grandparent of the bean.
OADefaultHideShowBean hideShow =
(OADefaultHideShowBean)findIndexedChildRecursive("<component ID>");
// Alternatively, if this code is in a controller associated with the hide/show
// region, simply cast the OAWebBean parameter passed to the processRequest()
// method.
OADefaultHideShowBean hideShow = (OADefaultHideShowBean)webBean;
// Set the undisclosed Text. Always remember to obtain a translated text value
// from Message Dictionary. NEVER set a hard-coded text value.
hideShow.setUndisclosedText("<Show...>");
// Set the undisclosed Text. Always remember to obtain a translated text value
// from Message Dictionary. NEVER set a hard-coded text value.
hideShow.setDisclosedText("<Hide...>");
// Set the default (initial) disclosure state.
hideShow.setDefaultDisclosed(pageContext, Boolean.TRUE;
Thanks,
Kumar

How to add a new dimension in ASO cube without losing all data

Hi,
I have an ASO cube with 18 dimensions and I want to add a new one (regular). When I add this new dimension it asked me that the all data has to cleared before the restructure can take place. If I click yes then I would lose all data regardless of the fact if I have a level0 export or not. Because when I tried to reload the export back into the cube it gave me an error cause all the dimensions were not present in the export. Does anyone know how would I be able to accomplish this task?
Thanks
fikes

You can try this work around solution.
1) Export Lev0 data
2) Clear the cube
3) Add new dimension Regular.
4) Add a default member Reg00 in the new dimension and save.
5) Open the Lev0 data in a text editor, Insert "Reg00" in the begining of the file and Enter.
6) Lev0 file will have first record "Reg00" and the remaining export file will be from the second record.
7) Load the modified file with out rule file.
You can verify that all your history data will be loaded w.r.to the Reg00 of the New dimension Regular.

How to add a new filter in existing BIWS (WEBI) for dashboard consumption

Hello Experts, we have 7 web service query's connected to a dashboard. Basically it is one WSDL URL and 7 Get Methods...Web service queries are BIWS (via WEBI document instance). There are filters setup for each of these web service methods.
Recently there was a request to add 2 new fields to the webi document and also the 2 fields need to be included as filters in the 7 methods. I know there is an option to edit the method, but when i edit the method, i cannot find the 2 new fields in list to set as filters.Can anybody help me understand how to add filters to an existiing web service method? I do not want to delete the method and republish the block as web service.
Any help will be great and points rewarded.
Thank you
Ann

Hi Ann,
You can create a new WebServices or modify the document block on which the webservices is published.
Once the block is modified you might be able to see the new objects in the filters.
Thanks,
Amit

How to add new fields to picklist of search criteria for opportunities

Hi Friends,
Could you please tell me how to add new fields to the picklist of search criteria of Opportunities in WEBCLIENT(CRM 2007).
Regards,
Vijay

Dear Vijay,
We are facing the same problem over here.
Have you managed to find a solution? Please share
BR,
Rohit

How to add abap stack to existing NW Java engine- for XI installation

Hi All,
I am having a netweaver Java Stack installed on my system. I would like to install XI - in order to install Xi ,I guess the system should be ABAP + Java. But since I am having java based engine, I would like to add ABAP stack to it. So, my question how to add an ABAP stack to already existing JAVA/J2ee engine.
So what this process is known as-- Is it upgrading or New Installation. Because I need the guide and CD's for it.
Can any one tell me which Guide(Install/upgrade/Master) wud help me.
Thanks
S

Hi
check the link www.service.sap.com/instguides>SAP Netweaver 7.0>installation guides there you can find what is the process which involves in installing ABAP+JAVA with PI
Regards
Uday

How to add custom message in place of default message for af:inputDate

Hi ,
I am using JDeveloper 11.1.1.6.0 ,
how to display the custom message <af:inputDate in place of default message "please enter valide date or Time" . i am trying through converter datepicker icon is disable .please help me how to add client side converter.
Thanks
ARm

Hi,
see the ADF Faces skin selector: http://docs.oracle.com/cd/E23943_01/apirefs.1111/e15862/toc.htm#inputDate
Its has a resources string that you can use to change the message: af_inputDate.TIP_TITLE_SELECT_DATE
For more see:
Customizing the Appearance Using Styles and Skins - 11g Release 1 (11.1.1.6.0)
Frank

How to add folder from KM content to Portal Favorites for selected users

Hi all,
I have cretaed a folder in KM content (In documents) for uploading implementation related ddocuments.
how to add this folder in "Portal Favorites" of selected users only.
Please guide.
Thanks in advance.

Hi,
well one way could be the following.
Go into KM-Content --> Repository "userhome" --> select the user you want --> navigate into his folder Favorites --> create a new internal link in this folder to the folder you want
In the favorites of the user there is now a link to the desired folder and after clicking a new window will be opened. You can copy this internal link to the favorites folder of the other users you want.
Regards
Alex
Edited by: Alexander Götz on Apr 16, 2009 5:12 PM

How to add details of absences in absences Infotype 2001 for previous dates

Similar Messages

Maybe you are looking for