How to add disk to disk group File System in oracle windows

Hi all
Please any body can help ... I need to know how can I add disk to disk group
I have Oralce 11g Database RAC Setup with 2 nodes node1 and node2 , ASM not enabled , Windows OS 2003 , I have shared storage (G, H and O ) My system administrator add additional SAN Storage (R) to my setup, how can I add the new disk to disk group.
Please help

I have Oralce 11g Database RAC Setup with 2 nodes node1 and node2 , ASM not enabled , Windows OS 2003 , I have shared storage (G, H and O ) My system administrator add additional SAN Storage (R) to my setup, how can I add the new disk to disk group.If ASM is not enabled that mean, Database is running on normal file system?
Hi thanks for you help.,,, But my system admnistrator already did thies steps,... I think my question was not clear enough
I mean after I add the disk group from O.S side what shall I do from Oracle Side? Since From windows explorer I can see the new drive.If the volumes are ready, you can use ASMCA to configure diskgroups.

Similar Messages

How to add more disk space into /   root file system

Hi All,
Linux 2.6.18-128
can anyone please let us know how to add more disk space into "/" root file system.
i have added new hard disk with space of 20GB,
[root@rac2 shm]# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/hda1             965M 767M 149M 84% /
/dev/hda7             1.9G 234M 1.6G 13% /var
/dev/hda6             2.9G   69M 2.7G   3% /tmp
/dev/hda3             7.6G 4.2G 3.0G 59% /usr
/dev/hda2              18G   12G 4.8G 71% /u01
LABLE=/               2.0G     0 2.0G   0% /dev/shm
/dev/hdb2             8.9G 149M 8.3G   2% /vm
[root@rac2 shm]#

Dude! wrote:
I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
Simple stats. Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
2 disks buy you 2 tickets in The-Drive-Failure lottery.
Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

How to add an virtual disk device

I remember i have seen one doc describe how to add an virtual disk device in solaris system, but I forget it now, can somebody help me?

not sure what you are trying to achieve...
However you should not be referring to Luns via their logical device i.e. c0t0d0, but using the unique did device or the /global device. refer to scdidam -L which will list all the did devices across all nodes and map them to the logical device path.

How to add a table to pdf file ?

How to add a table to pdf file ?
Not able to use the table component. Its not active.
Any help pls
Thanks
Peter
http://www.ethos.ag

http://forum.java.sun.com/faq.jsp#format

How to add xmp metadata to dae files

How to add metadatas to 3D dae files...?
The cad file used as an entry, the 2D files used as textures, environment, shaders...etc?

Hi,
Yes sorry about the "Acrobat Tag" , the question was more for the CS6 suite, and the management of DAE files in Bridge and Photoshop Extended in a CQ5 DAM workspace.
But nevertheless, it should be cool if Acrobat X 3D could import directly Collada files...

How to add the Profit center Group in the PA report KE33.

Hi Frnds,
How to add the Profit center Group in the PA report KE33.Iam not able to find PC group in the list to add to the Charateristics already added.

Hi
PC group is not available as a Char in COPA..
if you want to do that, either create a Char Hierarchy in KES3 for the Char Profit Center
OR
Create a WW char in KEa5 and write a derivation rule using the method "Enhancement" .. Write ABAP Code in COPA0001 exit
bt, Ajay M

In Share point 2013 how to add more than 2 group by in list

In Share point 2013 how to add more than 2 group by in list .

Hi,
According to your post, my understanding is that you wanted to group by on more than 2 columns in a List View in SharePoint 2013.
There is no out of the box way to achieve your scenario directly.
As a workaround, we can use the following method to achieve it.
First, we can insert Data View Web Parts in SharePoint Designer 2013.
It’s because the SharePoint Designer 2013 can’t support Design view, then the Data View Web Parts XSL cannot be visually manipulated.
You can refer to the following article to insert a Data View Web Part.
http://www.synergyonline.com/Blog/Lists/Posts/Post.aspx?ID=259
And then, you can use the following solution that can be used to
group by on more than 2 columns in a view
to implement it in SharePoint Designer 2013.
http://techtrainingnotes.blogspot.com/2011/01/sharepoint-group-by-on-more-than-2.html
http://chanakyajayabalan.wordpress.com/2010/03/15/group-by-for-more-than-two-columns-in-sharepoint-list/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

HT1338 Got this warning when I performed a Disk verification.Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

This is the warning I get when I used disk verification in Disk Utilities
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

Welcome to Apple Support Communities
Don't worry about that message. You can ignore that > http://support.apple.com/kb/TS1448

How to add column dynamically based on user input in oracle?

**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.

You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

HT2476 How do I copy the names of files in a finder window to a text document?

How do I copy the names of files in a finder window to a text document?

If using Apple TextEdit Applications: Select all the files in the finder window, choose copy. Go to the TextEdit window and from the menu choose Edit then choose Paste and Match Style from the Edit drop down menu.

How adutilities comes to know that the file system is shared file system

How adutilities comes to know that the file system is shared file system ?
In multinode shared file system : if we want genearte message file we can invoke adadmin from any node and perform this activity. In this case, how adadmin knows that the filesystem is shared filesystem.

Duplicate post.
How adutilities comes to know that the file system is shared file system
How adutilities comes to know that the file system is shared file system

Backup of application file system in oracle apps 11i

what are the ways to take the backup of application file system in oracle application 11i ?
Can anyone suggest regarding this ?
Application :11.5.10.2
OS : RHEL 3.0

Check the following threads:
Apps Backup
Re: Apps Backup
Backup Oracle Applications (11.5.10.2)
Re: Backup Oracle Applications (11.5.10.2)
Best Backup Strategy
Re: Best Backup Strategy
System Backup
system backup
Reommended backup and recovery startegy for EBS
Re: Reommended backup and recovery startegy for EBS

How to add a virtual disk into a 'guest VM' after VM has been created?

Well, it was easy when one need to add a virtual disk before creating a guest VM. All need to do was to edit the template and click on disk tab and create a virtual disk.
However the challenge comes after created a 'guest VM'. I need to add additional virtual disk into this 'guest VM'.
This is what I did.
Click on Repositories tab --> Under repositories--> Virtual Disks. There is a green "+" sign. Click on it. It says create virtual disk. Follow the instruction, I enter the virtual disk name, size, and select if it is spare or non-spare. Hit ok. Well, everythings seems fine.
Next, I click on the "blue folder" icon which indicated import virtual disk. It asked me about Virtual disk download location.
According to the manual, http://docs.oracle.com/cd/E27300_01/E27309/html/vmusg-repo.html#vmusg-repo-vdisk
Virtual Disk download location: The URL for the virtual disk file. The URL protocols supported are HTTP, HTTPS, and FTP. For example:http://example.com/vdisks/myvdisk.img
How can I determine what is the URL in my case?
Where is the newly created virtual disk located? Isn't it supposed to be in Oracle Server? But it doesn't have a http server running there.
Please help.
Thank you.

Virtual disks can only be added and removed at runtime from a PVM. You don't even need to know anything special. Just create the vdisk and use the VMs settings to occupy another slot with the new vdisk.
But as I said… this works only with PVMs, not HVMs. In case of a HVM, you will need to shut down the VM and add the disk afterwards, then fire it back up.
The little folder with the blue down arrow is for importing an existing vdisk file from a web- or ftp server. If you have already created the vdisk, you won't need that.

How to add payment advice for XML file filed in vendor account group

Hi All,
I have a requirment to add Payment advice for XML file field in vendor account group under payment transcation tap,
kindly advice where i can add above mention field in vendor account group.
thanks
khaja

done

Root disk craches how to retrive the data from ZFS file systems.

Hi Friends,
The solaris 10 OS (root disk) is crached.i have configered execpt root disk to all disks for ZFS file systems.We using to application.Now any possble to retrive the data.
Server model - V880
Pls help me.
Advance thanks.

If the OS wasn't on ZFS, then just rebuild the server, hook up the drives and run 'zpool import'. It should find the pool on the disks and offer it up to be imported.
Darren

How to add disk to disk group File System in oracle windows

Similar Messages

Maybe you are looking for