How to add 'Do Not Reply' in MacMail OSX Mountain Lion

For security purposes with some of my e-mails, I do not want respondents to 'Reply'. I have noted this indication from other correspondents especially Apple and Microsoft.
I have not been able to find this feature in MacMail Version 6.6 Preferences.
Does this feature exist?
Thank you!

Did you try this - http://www.okidata.com/mkt/html/nf/MacSupport.html -?
Clinton

Similar Messages

How do i do a full reintstall of osx Mountain Lion

How do I do a full reinstall of OSX Mountain Lion so that all data from my internal hard drive on my Macbook Pro is wiped out and starting fresh?

Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine. I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
Unsupported operating system
The router software supports these operating systems:
- Mac OS X 10.5.8 or later
- Mac OS X 10.6.1 or later
- Mac OS X 10.7 or later
I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
Thanks
Gary

All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

How much will it cost to update to OSX Mountain lion when it becomes available?

How much will it cost to update to OSX Mountain Lion when it becomes available?

Abisingar wrote:
How much will it cost to update to OSX Mountain Lion when it becomes available?
I read somewhere it will be $299.00 I also read somewhere that it will be .99c I also read somewhere.......etc. etc. For goodness sakes, wait till it is released! We know nothing more than you except that it will be the next OSX.
Pete

How do I play pc games on my osx mountain lion imac

I have recently purchased a imac and have upgraded to os x mountian lion. I am a teenager and like to play games but none of the good ones are for imac. How can I play games on my imac. Or how can I switch to windows all together with still using my imac display.

Windows games unless re-written for Mac can only be accessed in Windows. This is an overview I borrowed from a fellow contributor:
(Borrowed from Kappy)
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I rebooth my macbook pro and now its not letting me download osx mountain lion

..

What exactly do you mean by "restored"?
Did you use the recovery option (Command + R or Command + Option + R during startup)? If so, the process to install should be automatic if you used Disk Utility to wipe the drive.
Please explain exactly what you did, the model of your machine, and was Lion the original OS on it or did you buy it at the app store?

How to add the Note board web part to a page with powershell

Hi everyone,
I've been looking around everywhere but haven't seen it explicitly mentioned.
Does anyone know how to add the Note Board web part to a Team Site page, e.g. Non-publishing site, Left Zone, First webpart in the zone in powershell?
Examples like this one http://adicodes.com/adding-web-part-to-page-with-powershell/ only talk about custom web parts uploaded from a local drive.
The example here looks good - http://spcrew.com/blogs/lists/posts/post.aspx?id=21 but is it for the Page Viewer Web Part. How would you go about getting the correct name for the note board web part and configuring it?
Many Thanks,
Ashley
function main(){
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$url = "http://sp2010dev1/sites/test1"
$OpenWeb = Get-SPWeb $url
$OpenWeb
$OpenSite = Get-SPSite $url
$file = $OpenWeb.GetFile("http://sp2010dev1/sites/test1/SitePages/test1.aspx")
$WebPartManager = $file.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
Add-PageViewerWebPart "http://sp2010dev1/sites/test1" "http://sp2010dev1/sites/test1/SitePages/test1.aspx" "Body" 0 "SPCrew Site" "sp2010dev"
$OpenWeb.Dispose()
function Add-PageViewerWebPart($SiteURL, $pageUrl, $webpartzone, $index, $title, $content)
    $site = new-object Microsoft.SharePoint.SPSite($SiteURL)
    $web=$site.OpenWeb()
    $webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
    $webpart = new-object Microsoft.SharePoint.WebPartPages.PageViewerWebPart
    $webpart.ChromeType = [System.Web.UI.WebControls.WebParts.PartChromeType]::TitleOnly;
    $webpart.Title = $title
    $webpart.ContentLink = "http://www.spcrew.com";
    $webpartmanager.AddWebPart($webpart, $webpartzone, $index);
    $web.Close()
    $site.Close()
function Get-SPSite([string]$url) {
    New-Object Microsoft.SharePoint.SPSite($url)
function Get-SPWeb([string]$url) {
    $SPSite = Get-SPSite $url
    return $SPSite.OpenWeb()
    $SPSite.Dispose()

Hi,
According to your post, my understanding is that you wanted to add the Note board web part to a page with PowerShell.
The name of the Note Board web part is SocialCommentWebPart.
I recommend to use the powershell code below:
$pageUrl="http://sitename/SitePages/test.aspx"
$SiteURL="http://sitename"
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.Portal.WebControls.SocialCommentWebPart
$webpart.title="Note Board"
$webpartmanager.AddWebPart($webpart, "MiddleZone", 0);
$web.Close()
Then the Note board web part will be added to the page.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to download but not install OSX Mountain Lion on Mavericks

Hi all
I would like to download but not install OSX Mountain Lion on my MBP which is currently running OSX Mavericks.
This however seems impossible. I think OSX Mavericks were already installed on my MBP and therefore it seems "impossible" to download it.
Now, why would I to do this? The answer is quite reasonable, due to certain demands related to an application portfolio I need Mountain Lion, because the portfolio is not upgraded to run on Mavericks. And, it is more reasonable to downgrade a version of OSX, rather waiting for the portfolio upgrade which can take years.
Yes, I need to downgrade my secondary MBP which also came with preinstalled Mavericks. This can be done, if I only could download but not install Moutain Lion.
It should be easy enough; download Mountain Lion, make an installer and make a bootable thumb usb stick. Then erase Mavericks and install Mountain Lion.
I have previously bought Mountain Lion so it is accessible to me in the App Store, but whenever I try to hit the Download button, I get a message saying this can't be done, since I am running Mavericks.
This bugs me, it should be obvious users needs the flexibility to swap whatever OSX version they need. It is still software.
So, how can I download but not install Mountain Lion on my newer MBP that came with preinstalled Mavericks?
I would like to see answers like:
"In order to get this to work, you first have to disable the locking mechanism in [...] " instead of "No, this is impossible to do"
Regards

Thanks for your reply Eric
Can't help wondering thought, people are ok with this?
Basically Apple are saying: "Do not attempt to install an older version of OSX which came preinstalled. If so, expect multiple failures." Really?! Has it always been so? For me it's not like I'm going to install Snow Leopard on my Late 2013 Retina MBP, but I would expect some form of backward compatibility between the previous version and it successor. Apparently this is not possible, and how is this even acceptable?
Personally, I am not going to downgrade, as if I had a choice, but I would and I expected however, the possibility to at least download the previous OSX version. What do you do if you have bought several applications, not necessarily online from App Store and buy yourself a new Mac with preinstalled Mavericks and after installing your "old" applications they fail to work properly? What do you do since downgrading apparently is not an option. So... again, what do you do?
If you don't have friends with an older Mac, you could be facing serious problems. And I'm not talking about gaming, but serious business.
I find this quite disturbing actually, and please tell me it's not so. There gotta be a way to do this?
I simply want to download the OS but I expect some registry values (like windows' registry) keeps preventing this.
It should be possible to simply download and not download and install in one operation, shouldn't it?
Regards

Excel 2011 Will Not Link to MacMail in Mountian Lion From a Hyperlinked Cell

Unlike Excel 2004, my shiny new Excel 2011 will not link to MacMail in Mountian Lion from a hyperlinked cell email address entry. When I click on the button "Launch E-mail Application" I get the message, "An error occurred trying to find or launch your email program".
When I click on the cell with the link I get the message. "Office cannot open the URL you specified. Make sure you have a web browser installed and that it is configured correctly".
Does anyone have knowledge how to fix this up? Thanx. :-)

Best to take your question to the MS Office 2011 for Mac Excel forum - http://answers.microsoft.com/en-us/mac/forum/macexcel?tm=1358848436805. I've no problems using Outlook...
Clinton

Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?

Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?

It appears that many of the problems with the HDMI are the "monitors" that are being used. Samsung and Vizeo both DO NOT support a computer input on HDMI only VGA. There probably are others, manuals must be read to confirm compatability.
I strongly believe that the reason the 10.8.2 update was pulled is due to the fact (it happened to me) that the new Disk Utility creates a Fusion drive if aftermarket SSDs are added to the system. I think Apple wants this propriatary Fusion Drive to be something you buy from them not a "homebrew" for lots less money.

UPDATING OSX MOUNTAIN LION ADOBE VIEWER. recently received e-bill statement. could not view. site recommended updating adobe viewer. as this feature comes OEM from Apple, how is this accomplished?

UPDATING OSX MOUNTAIN LION ADOBE VIEWER. recently received e-bill statement. could not view. site recommended updating adobe viewer. as this feature comes OEM from Apple, how is this accomplished? Note, this was an online view for the PDF document.

Thanks for your help. Final question. So I am assuming that PDF funcitonality is accomplished via Preview. I assume then that the PDF creation in Mail is also similarly accomplished, that is not via an Adobe product, but equivalent funcitonality. I see now that I can download Adobe. But, does the Apple PDF equivlant provide updates to keep up witht the new encoding structures released by Adobe, so that I can only update the Apple equivalent, or is this not practical because Apple would be chasing Adobe for software updates?

OSX Mountain Lion Server - how do you uninstall this including services

Hi All,
Sorry if the question has been asked before.
I have Mountain Lion 10.8.5 and installed OSX Mountain Lion Server (2.2.2) and run into a couple of issues after installed successfully.
* I no longer can add users and groups.
* Open Directory fails to connect.
So I read some forums and uninstalled the server by trashing it, deleting /Libaray/Server, empty trash and reboot. But when I reinstalled the server it renabled all the services that I had previously and still not able to add users and groups. Open Directory fails to connect "not able to load replica" So I try to create a new OD and get an error the server is already a Network Server.
So basicaly I want to start from scratch and need some assistance how to get rid of OSX Server.
Thanks
Sahid

Wipe the disk, and reinstall OS X. (Not fun, of course. I just created a bootable USB disk for this purpose, and nuked an errant server configuration. A "target practice" server used for testing purposes had gone awry, and needed to be wholly reset. So I know what you're going through. Visit here or here for some instructions.)
FWIW, usual trigger for problems with OS X Server on a NAT'd network is bad DNS. That step gets skipped, or folks think they can refer to ISP or off-LAN DNS servers, and problems ensue. OS X Server needs LAN-local DNS when NAT is in use.

How do i connect my AOC Monitor (N19WB) to work on my MacBook Pro 13 (OSX Mountain Lion) it wont recognise it.

Have Apple Mac put something in their computers to stop me connecting my AOC N19WB monitor to my Mac Book? (Thats silly of course not!) because their own monitors are on average around £ 800.00 each and people like me have to save a long time just to buy the MacBook and cant afford a Mac monotor as well (not for a long time anyway). Please Apple i only bought this brand new Mac Book 13 (OSX Mountain Lion) because i want to run Logic 9 without problems. If i cant even get it to work with my monitor it doesnt instill me with confidence.
Anyway guys, I have bought the right lead followed all the instructions but when i get to 'dispay' via preferences i dont see the same window that i am looking at on a range of forums and/or utube demonstrations. My window shows 2 options - 'Colour and 'Display'. All others that i have seen in addition show 'Arrangements'. Which i guess is the one that gives you the options as to which extenal monitor you wish to use. Other people have said that you just plug it in and the MacBook finds it for you (not on this machine)! Monitor just displays 'NO SIGNAL' and MaBook 'NO DEVICE DETECTED'.
Please is there any advise out there for me?
Yours Desperately
Graham

Hi, your post has been more helpful to me than Telstra's tech. support.
I have installed the generic manager and my 885 modem is now recognised and it appears to connect however there are no ip addresses listed under network preferences. You mention a driver. Is this something else I need to install? Do you have a link? Do I need to manually enter network settings? I should add that I am using Lion 10.7.3 Many thanks for your time

OSX Mountain Lion says not compatible when it is. Advice please.

Hi.
i am running OSX Lion 10.7.5 and waht to upgrade to mountain lion.
i purchased this on my macbook via the app store and it downloaded no problem but when i go to download it on my mac pro tower its says the following....
"We could not complete your purchase. OS X Mountain Lion is not compatible with this computer."
my house mate installed it on his mac pro and his is an older version than mine, i think mine is a 2009 model.
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          5 GB
Bus Speed:          1.33 GHz
so i am looking for advice on how to fix this so i can upgrade to mountain lion....
i hope some one can help soon
Dan.

boomboom1980 wrote:
i produce music so like to upgrade all the time as eventually people stop upgrading the drivers....
i think mine is a 2009 model.
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          5 GB
Bus Speed:          1.33 GHz
MacPro 1.1 is a 2006 Model

Osx mountain lion not downloading

My download of osx mountain lion gets to 142mb then stops! I've tried deleting the purchase and redownloading still the same thing,
does anyone have an answer for this annoying issue!

Hello, how much free space on your Hard Drive?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)

How to add 'Do Not Reply' in MacMail OSX Mountain Lion

Similar Messages

Maybe you are looking for