How to add dynamic calc storage property in planning?

hii am having problem in adding dynamic storage property inplanning application.i am using HAL to load members (metadata) into planningapplication i have all non level o members as dynamic calc. when irun HAL 3/4th of records are rejected.can anyone tell how to add dynamic calc property to mymembers. thanks and regards,Balu

Hi Ritu,
It's not difficult once you know how.
1) Go to: System Administration -> System Configuration -> Knowledge Management -> Content Management -> User Interface -> Search -> Search Option Set
2) Edit UISearch
3) Select your custom property from the list beside the option 'Allowed Predefined Properties' and hit save.
On 'Advanced Search' your property should now be listed under 'Filter by Predefined Properties'.
You may also add it to 'Allowed Sort Properties' if you like.
I hope this helps,
Patrick.

Similar Messages

How to create dynamic calc account in multi-plan type application

Hi expert,
I have a planning application with 3 plan types.
I created a calculation script which fixed on accounts in plan type 1 only and the calculation suppose to calculate a "dynamiccalc" account with a member formula attached. Everytime I run the script, it takes very long time and I found there are sessions at the back of essbase with "Process local xref/xwrite request" request to other plan types.
It does not has this kind of session if I change the account to "store".
Would like to check, is it possible to create a dynamic calc account to calculate for only 1 plan type in a multi-plan type application? Is there any special setting that I need to do to enable this? I already selected source plan type as Plan type 1 for my dynamic calc account. Please help!
Many thanks!!
My HP application is on version 11.1.2.1.

Hi Jake,
Thanks for pointing out the check box. Overlooked it and the checkbox was not unchecked, even I only wanted the account to exist in 1 of the plan type.
However, after I unchecked and refresh now, when I run the calc script, it still trigger process at the back to the other 2 plan types with "Process local xref/xwrite request" request. What else could I have missed?
I already added the "HSP_Nolink" UDA to all accounts in plan type 2 and plan type 3 and confirmed that there's no account with "Xref" member formula, I really don't know why it is trying to process local xref request. Can anyone help??
Many thanks!!!

Office 365 - sharepoint: In Advanced search Page, How to add custom column under property restrictions

In Advanced search Page, How to add custom column under property restrictions?

Hi,
The Navigation control can be added into your HTML page in the Snippet Gallery:
The two links below about how to create HTML master page and adding snippets needed into it for your reference:
http://borderingdotnet.blogspot.jp/2012/12/how-to-create-html-masterpage-for.html
http://msdn.microsoft.com/en-us/library/office/jj822370(v=office.15).aspx
Feel free to reply if there still any question.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to add new product in interactive demand planning(IDP)

Hi gurus,
How to add new product in interactive demand planning(IDP), can you suggest me, when i click data view in IDP, it will show new product.
Regards
babu

Hi Raj,
Since the New Product is already in MPOS what you need to do in your Data view is to go to "Selection Window" on the left side of the screen(make sure you dont click on the existing selection ids). Select Product at the top, the planning version will come in the next row and then you again select the Product as charateristic and enter the New product name against the Product(Characteristic) and then save it in case you want it to use for your future references. When you will double cilck on the newly made selection id you will be able to see you product with the keyfigure details in right side.
Please let me know if it works.
Thanks,
Anand.

Removing Dynamic Calc Using Property

Does anyone know what property can be used to remove dynamic calc from a member when using a load rule? I know of the different properties like ~, +, -, X, V, etc., but I need something that will change the member to Store Data.Thanks,Louie

We are on v6.5.3 and haven't found a way. There's an enhancement in V7.0 that will allow you to do this. The field memeber is S.

How to ADD dynamic header text to Right hand Corner of IDR -FPM OVP/OIF

Hi,
How can we add dynamic header text to right hand side corner in FPM OVP?
I know we can handle left hand side.. but i do need simultaneously right hand side..
ANy thoughts??
Rgds
Tarun

I am not sure how it is arranged in 7.02, in 7.01 IDR layout is flow layout so you cannot have layouts other than that. I thought that this has been changed in 7.02 to accommodate the matrix layout. I am not sure about it. If this was true then you can try to play with the layout to fit right hand side. It is not easy though.

How to add Dynamic .php content to a Dreamweaver Template

OS: Windows 7
DW Version: CS5
PHP: XAMP Local Server
I hope someone can help. I have created a Dreamweaver Template for .php and created 5 child pages of this template. Everything is in working order as far as that is concerned. Here is my problem:
I want to add some dynamic data (some categories) from a MySQL database to a nonEditable section of the main template so that it will flow to the 5 child pages. I can create a connection to the database with no problem, but when I go to insert a recordset into the template, it asks me to set up the "site", "document type" and "testing server" which I have already done. I am pretty sure that this is because it is looking at the .dwt file type and saying that it needs to be a dynamic document like .php. I have tried going through those steps, but then it just ends up renaming my .dwt file to .php and then it is no longer a template. I do not know why I cannot add dynamic data to a dreamweaver template. It seems like it should be a no-brainer, but it just isn't working out for me. In my research, I did locate the following
http://help.adobe.com/en_US/Dreamweaver/10.0_Extending/WS5b3ccc516d4fbf351e63e3d117f53d610 8-7fdb.html
but wasn't completely sure how to apply it or if it only pertained to CS4 since I am using CS5. To be honest, it confused me more than it helped.
I really hope there is a logical and simple solution to this issue as I have spent a lot of time researching/testing this.
Any help/direction is greatly appreciated. I am not looking for someone to just solve my problem and am willing to dig deep to learn, I am just do not know where to go from here.
Thanks again in advance for your assistance.

Brad,
Thanks that worked! Although I will have to re-create my child pages and re-link my style sheets and scripts. But that will not be too difficult as I have not yet added any content to them and is a very small price to pay for the answer to my bigger problem. What is a bit quirky is that I did try to create a test .php template but when I saved it, DW did not automatically add the .php to the end after .dwt. but rather just named it test.php. I didn't think to just rename it since I had read that it would add it automatically so I thought I was doing something wrong.
Maybe there are settings in the preferences that will fix this. None-the-less, I can now move forward with my development thanks to your timely response. I really appreciate it.

How to add dynamic data type as one of the terminals of a Custom VI

Hello,
Can anybody tell me if it's possible and how to add a dynamic data type as one of the terminals of a sub-VI? I would like to have a terminal that I can connect signal from DAQmx to my sub-VI. Thanks.

Here is one of the coolest things about LV, and one of its major advantages over languages like VB - it has automatic memory management and it compiles whenever you make a change. This allows you to be very free in the way you handle data and change your code. In this case, you should note the small gray dot that appears when you wire the dynamic data into the Array of Waveforms input. This gray dot means that LV coerces the source data type (DDT, in this case) to the target data type (Array of waveforms). If it wouldn't match, you would get a broken wire, the VI couldn't run, and if you hover over the wire or press the broken run button you would get an exact description of the error. Cool, eh?
This can also be seen in other things. For example, you can change an array's data type or number of dimensions by simply doing it. This will automatically be reflected anywhere the array is called in the program, and if anything won't match, the VI will be broken. If you change the # of dimensions of an array, any array function which that array is wired to will adapt. This allows you to be very safe in the way you write code, because you have LV watching all that annoying stuff for you. You don't have to worry about misspelling a variable here (for the most part).
One important point about coercion - it does take processor power. This will usually only be evident in large arrays or loops, but it is an important point. Another thing is that coercing numeric types can cause you to lose data - coercing a DBL to a U16, for example, will cause you to lose all the fractional data.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!

How to add Dynamic Pick List in Parameter

Hi all,
While Selecting parameters in that Properties-.>value->List of Values >Pick list>in that two options 1.value
2.Description- in that i am entering static it is taking but i want to take values Dynamic from Database Table
Any can help me in this how to add parametes dynamically from Data base table
Sincerly,
Amol

Hi All;
I am using this version Eclipse-jee-europa-fall2-win32-with-CR4E-v.1.0.4 for making crystal reports
Is there any another version that can support Dynamic choice from the List of Values drop down when i create parameter.
or any other link that support / version
Sincerly;
Amol

How to add dynamic ClientAttribute in RichCommandLink in ADF in JAVA

Hi
how to add client attribute in RichCommandLink of ADF dynamically in java code.
I used like this
RichCommandLink richMenuLink = new RichCommandLink();
richMenuLink.setText("text");
richMenuLink.setShortDesc("desc");
richMenuLink.setId("id7");
richMenuLink.setPartialSubmit(true);
richMenuLink.setClientComponent(true);
ClientListenerSet cls = new ClientListenerSet();
cls.addListener("action", "JSMethodName");
richMenuLink.setClientListeners(cls);
Set setObj = new HashSet();
ClientAttributeTag tag = new ClientAttributeTag();
tag.setName("myID");
tag.setValue(); //this sets the value for the client attribute. But the method takes ValueExpression and i have my value in string.
setObj .add(tag);
richMenuLink.setClientAttributes(setObj);
menuBarObj.getChildren().add(richMenuLink);
Is ClientAttributeTag is to be used to add client attributes in rich command link? or is there any other way to add client attribute in that ??
Edited by: Datta,Sudeep on Apr 24, 2013 3:12 AM

And the setClientAttributes() takes Set object, so i added ClientAttributeTag and then set it in HashSet. Is this the way to do it ??
and how can i set string value in ClientAttributeTag.setValue() ??
Please help.
Sudeep

How to add dynamically called files to a teststand workspace?

I am using TestStand 4.1.1 and LabVIEW 8.6.1 to try and install dynamically called VI's into a TestStand workspace. I am following the instructions on pp. 14-8 through 14-10 in the TestStand Reference Manual (May 2008) edition. So far I have not been successful, and the instructions are not clear. For example, I cannot see in the instructions anywhere that I am supposed to add my test sequence. Should the test sequence already be loaded in the project before this set of instructions is followed? Could someone clarify this set of instructions for me?
Then when I get a successful build, I would like to try out the deployment and installation on a target computer. Please provide a detailed and clear set of instructions on how this can be accomplished.
Also, is there anyway to do this without building an installation? Originally I just wanted to create the deployment without an installation. But please explain both ways.
Thank you.
epsilon-delta

Epsilon,
What are you using dynamically called VI's for? Are you adding dynamic VI's to LabVIEW, or to TestStand? If you are calling from TestStand, you don't need to do anything, the deployment utility will do all of the work for you. The section on adding dynamically called files to a workspace listed in the Test Stand Reference Manual is a mini-tutorial, and not exactly step by step instructions. All you need to do to add dynamically called VI's is to add them to your workspace file, and make sure the TSW is saved before you build your deployment. The example right before that one, covers how to deploy from a TSW, and mentions that you need to add your sequence file to the project that is in the workspace.
The steps needed to deploy a sequence is as follows:
1. Create a new workspace file
2. Right click on the workspace file and select "Add a project"
3.
Right click the project and select add additional files (here you
should add your sequence file and any files that are dynamically called
(e.g. VIs))
4. Go to Tools --> Deploy TestStand System
5. Check "Deploy Files from TestStand Workspace File"
6. Select the appropriate file path where you saved the workspace file
7. Add in a path for the location you want to store your deployable image (for instance your desk top)
8.
Go to the distributed files tab and select "yes" to analyze the source
files [here you will find all the files you chose to include with your
distribution, this is automatically populated from the workspace and
its dependencies), if you are deploying and plan on using a User
Interface and not the TestStand Sequence Editor, here you would need to
include the UI as well
9. If you were making an installer, you
could check the "Create installer" box under installer options and
specify a location. Also here you could click on the drivers and
components box to add additional driver installation (only if you are
building an installer)
10. Click on build status, then build
You can also reference the same manual 14-7 through 14-8 which goes through an example deployment, and installation on a target computer.
After you build your installer, copy the files to the target computer and run the setup.exe to install to the new computer, what problems do you have? Do you get errors, and if so can you take screenshots of them?
If you do not wish to create an installer, and you already have a user interface installed, and the TestStand engine on your target machine, you can just copy all of your files to the target machine, and run them normally. We generally recommend building installers, so that any missing dependencies on the target system could be installed, and the TestStand deployment tool takes care of pulling out all the needed files for you (except for the dynamiclly called ones, which is why you need to add them yourself). If you want you can use the deployment tool to create an image and then move that image to the target computer. The image should have all of your non-dynamic files included, but still requires that your system have all needed components installed. Please let me know what part of the deployment, installation process you are having errors, and we can help you troubleshoot. I always recommend trying to deploy a very simple example sequence with no code modules, if you are having problems. This is always a good troubleshooting tip that will help to determine if the problem is with one of your systems, or with your specific sequence file.
Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

How to add new field storage location of MM in FMDERIVE

Dear All
I want to add new field storage location in FMDERIVE as need to consume budget on the basis of storage location
Thanks in advance

Hi SAPCOFI,
With Eli and Aleksey on this thread, you dont need to worry anymore
Just to add on to the inputs....
Ensure that the USERTEMP1 buffer is cleared before a value is entered. We faced this issue wherein the previous S.Loc value was left as it is in the USERTEMP1, resulting in an incorrect assignment.
I also suspect that you might need to run the process of identifying the enhancement point and populating the S.Loc value into the memory and then to USERTEMP1 for different transactions separately. Not sure if this is the standard process, but atleast we did it that way.
For eg, we faced issues during Goods Issue from MIGO, as also during 301, 309 and 311 movement types. So execute these transactions too once the development is done and if the USERTEMP1 field isnt getting populated..
FMDERIVE TRACE was the most important tool during our tryst with S.Loc mapping into USERTEMP1....Ensure that you set it everytime during testing for this S.Loc, post development
@Experts - Please correct me wherever I've gone wrong.
Regards,
Wy.

How To add dynamic field using struts?

Hi All,
I new to the struts. I wanted to add dynamic form field .

Why do so many people ask struts questions here? It's an Apache project and it has a mailing list. Why not go directly to the source? [http://struts.apache.org/]
Kaj

How to add a (new) Predefined Property in Search

Hello All,
I have created new Predefined Properties called as ReqNo and it holds an integer value.
I wanted to know how can I make this field available in the Search Functionality?
There is an option in Search wherein one may search using Predefined Properties like Size, Created, Created By, Name, Modified and Modified By.
I would like my new property to be listed under this section.
I have read few help pages but they explain how can I change the orientation or narrow the different Search Options but now what I want.
Please help me solve this query.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi Johan,
I tried it again (twice) but the newly created Predefined Property did not add in the Filter by Predefined Properties.
Is is possible you may send me your email-id such that I can forward few snapshots showing how am I doing this job.
There may be a minute point which Im missing and not able to catch it.
Please help.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

How to add dynamic column in jfreereport

hi,
i am working on a project aboit accounting package.
i had created a report in jfreereport .. buti am facing the problem of dynamic column addition in that..
i have to create the number of column as per user given range that will from 2 to 365
i had generated column for that
that should be like
1 - 5 , 6 -10 , 11 - 15 , etc...
how can i represent that alll column in print preview i can't represent that report in horizontal fashion . is there any way to display it ..
this report has no bound in horizontal or verticle means i have any number of rows or columns..
pls help.
kamlesh

hi,
that means u have fixed columns right? ie 5 columns in a report
if it write, than u can find out how u can rename the columns with exiting
one.
that means while runing report u have to pass all the 5 columns to report
instead of the exiting columns (ie rename the columns that u want add
columns)
u have to search in code for renaming in the code ie jfreereport package.
i think u understood.
daya

How to add dynamic calc storage property in planning?

Similar Messages

Maybe you are looking for