How to add "edits" to an adjustment layer, corresponding to cuts in a flattened timeline below?

I have a very complex music video edit. Hundreds of cuts. I'm not a colorist by trade, so I don't really know how much I like the idea of using speedgrade right now... having to export to dpx format, not being able to conveniently make changes after the color correction (which I do every time), learning a new interface, etc.
So, I want to try to do thigns within premiere if possible. The way I'd like to do this is by throwing my grades on adjustment layers for each edit / clip. However, I do not want to add and trim 500 adjustment layers, one for each edit.
Is there a way to add one adjustment layer, extend it over the entire timeline, and then just paste in all the edit points somehow? To chop the adjustment layer up exactly as my video is chopped up below it? The footage underneath is flattned and ready to grade.

I guess I'll just add that I managed to accompolish this, by just over and over using the shortcuts, "add edit to all tracks" and jumping to "next edit" over and over. Took a few minutes, and made a few slices through my video clips that I didn't have before, but it got the job done relatively quickly, albeit in a round-about sort of way.
Case closed, I guess, unless anyone knows of a better way to do this.

Similar Messages

PS not allowing me to add a Black & White Adjustment layer

Hi,
Hope you're well.
There is a photo I've downloaded from the Internet that is by a photographer who shoots in Black & White. However, when I print out the photo it comes out sepia. I tried adding a Black & White Adjustment layer, but when I go to click on the button in the adjustment palette it's grayed out. I've tried this on other photos of the photographer and does it fine.
Any idea what is going on and how it can be resolved? Thanks!

Well, let's assume you are in Grayscale. But just to be sure, open the image and look at the document title bar, it should read something like Gray/8. This indicates your color mode (other modes can be RGB, CMYK, Index and others...). The color settings are found Edit>Color Settings. But don't worry about those for the time being.
Can you give the specs for your printer? Inkjet printers use all colors in printing a grayscale image. Ideally, they do this in percentages that create a neutral tone on the paper. If some of the nozzles are clogged, or if you have wrong choices in the Print Dialog, you will definitely see a color cast. Printing only with black ink will not yield photo-quality results.
Make sure the most recent driver for the printer is installed.
Also, what version of Photoshop on what OS?

Anybody got an idea how to add EDIT to cl_salv_table class

I like the simplicity of the new CL_SALV_TABLE class - however as most of us realize it DOES lack edit capability.
What makes it really nice of course is that it at the basic level doesn't need any screens or even a field catalog to be defined / programmed by the user.
The cl_gui_alv_grid has all this functionality of course but is much more complex to use (judging by the number of posts we get on this Forum still using the old SLIS function module non OO version of ALV GRID reporting).
I was just wondering how difficult it would be to either add EDIT capability (user defined Z-class inheriting the cl_salv_table class) or have some simple link to CL_GUI_ALV_GRID from CL_SALV_TABLE.
Any ideas here would be great.
I really can't understand why SAP didn't build this in -- loads of processing today does actuallly require some type of user interaction -- pure display stuff is a very 1980's type idea - especially when typical work stations (and servers) had minimal power compared to todays systems.
Cheers
jimbo

I've had a quick look, and I think this would be a non-trivial task! We're blocked from inheritance, (the class is final - grrr - ), so we're left with composition or flow-through.
The problem with either of these techniques is that we've only got access to public attributes and methods.
A place to start would be to identify the relationship between cl_salv_table and CL_GUI_ALV_GRID. I've not found it yet...
matt

HOW TO ADD / EDIT AN ITEM GROUP

I am in the Item Master Data window and am entering a new Item Number. I want to associate it with a new Item Group from the pull down menu but it will not allow me to add to this list. How can I add a new Item Group? Also, how can I edit a current Item Group title to change it to another name?

Hi
To solve your issues ,
Go to system administration >setup>Inventory-->Item group .
If you need to Add --Press Ctrl A
If you want to edit -- find the item group -- and edit it .
This should solve your problem
Thank you
Bishal

How to add a field in the layer

Hello,
How can I add a field in the layer? We are in the interaction center and I enchance the the component IUICMD. I already created a atribute but doesn't happen in the screen.
Best regards,
Caíque Escaler

Hi,
Please check have u added that attribute in enhanced view configuration and check when u r configuring enhanced view u r using correct role configuration key.
Regards
Gaurav

Lightbox widget: how to add editable text over thumbnails?

Hi, I am using the Lightbox Gallery Widget and would like to add editable text onto my thumbnails... how can I do that?

Hi Irosenth,
Thanks for replying. I am very new to this stuff. Can you point me in the right direction? I don't know where to start. A little help can push me miles ahead.
Thanks for being patient.

How to add/edit contacts

How do I edit/add contacts. ie: undisclolsed contacts or other contacts

are you searching for contact sidebar you can use this:
[https://addons.mozilla.org/en-US/thunderbird/addon/contacts-sidebar/?src=cb-dl-featured contact sidebar]

How to add/edit render video presets?

I can't find how to add or edit render video presets used in (File->Export->Render Video) dialog.
Am I missing something?

JJMack wrote:
I'm afraid that your are right there are preset in CS6 for its media server dll and they are stored where you found them. You can use the preset and modify setting in the preset for a custom rendering. However there is no save new preset button so your custom setting can be saved as a new preset.
Yes, You can modify some rendering parameters (Dimensions, Frame Rate, Field order, Aspect Ratio).
But You can't modify preset settings. What I mean is target bitrate, maximum bitrate, key frame distance etc.)
You can't even determine what the settings are... (unless I missed something?)
To get the full Media Sever you need an Adobe video product like Premiere Pro. Perhaps use a trial verson to create additional preset that can be added to Photoshop CS6 presets. Presets for better Quicktime support for example.
This is not the issue. I have CS6 Master Collection installed...
Photoshop don't see Media Encoder presets and vice versa...

How to set levels values in adjustment layer via script?

I try to make a script which generates a non destructive adjustment layer for levels which already sets values for shadow levels and highlight levels. I tried the scripting listener in order to record it. Unfortunately the scripting listener only records the creation of adjustment layers but not their settings like shadow or highlight levels.
The first question here: Why can't the scripting listener do this?
So I tried to do it on my own and came up with the following script which won't work. My second question therefore is, can you help me to make a script which achieves my goal? Thanks a lot. I use Photoshop CC 2014.
var desc780 = new ActionDescriptor();
desc780.putInteger( charIDToTypeID( "ShdL" ), 60 );
desc780.putInteger( charIDToTypeID( "HghL" ), 190 );
var list126 = new ActionList();
list126.putObject( charIDToTypeID( "LvlA" ), desc780 );
var desc779 = new ActionDescriptor();
desc779.putList( charIDToTypeID( "Adjs" ), list126 );
executeAction( charIDToTypeID( "Lvls" ), desc779, DialogModes.NO );
Here is the script which has been recorded by the scripting listener. As you can see there is no setting of the adjustment layer.
var idMk = charIDToTypeID( "Mk " );
var desc188 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref135 = new ActionReference();
var idAdjL = charIDToTypeID( "AdjL" );
ref135.putClass( idAdjL );
desc188.putReference( idnull, ref135 );
var idUsng = charIDToTypeID( "Usng" );
var desc189 = new ActionDescriptor();
var idType = charIDToTypeID( "Type" );
var desc190 = new ActionDescriptor();
var idpresetKind = stringIDToTypeID( "presetKind" );
var idpresetKindType = stringIDToTypeID( "presetKindType" );
var idpresetKindDefault = stringIDToTypeID( "presetKindDefault" );
desc190.putEnumerated( idpresetKind, idpresetKindType, idpresetKindDefault );
var idLvls = charIDToTypeID( "Lvls" );
desc189.putObject( idType, idLvls, desc190 );
var idAdjL = charIDToTypeID( "AdjL" );
desc188.putObject( idUsng, idAdjL, desc189 );
executeAction( idMk, desc188, DialogModes.NO );

Photoshop Scripting

How to Add/Edit validation rule for Column in ADf table(Jdeveloper11g)

I am working on Jdevloper11g with ADF table. There i have one column where user can enter numeric value in range 1-1000 .So i have to add validation as such he/she can't enter value apart from 1-1000 range also not any other charcters.
I know on form, if i select attribute from binding and right click i will find one option "Edit Vlaidation rule..." and from there i can change validation rule for perticular field.
But how i can achive same on Column's filed??
Thanks for all help.
Jaydeep

Hi Barnislav,
I tried the way you mentioned but i am getting below exception.
Could not complete Edit validation Rule... Because it would result in an invalid document
oracle.bali.xml.model.XmlInvalidOnCommitException: SEVERE: Element RangeValidationBean not expected [ node = RangeValidationBean ]
<tree IterBinding="searchConfigurationDataIterator" id="searchConfigurationData" ApplyValidation="true">
<nodeDefinition DefName="com.oraclecnm.util.search.SearchAttributeBean">
<AttrNames>
<Item Value="searchAttributeName" />
<Item Value="searchAttributeId" />
<Item Value="weightage" />
<Item Value="isAttributeSearchable" />
</AttrNames>
</nodeDefinition>
<RangeValidationBean OnAttribute="weightage" ResId="pages.SearchConfigurationPageDef.searchConfigurationData_Rule_1" Inverse="false" Severity="Error" Name="searchConfigurationData_Rule_0" OperandType="LITERAL" MinValue="1" MaxValue="1000" />
</tree>
     at oracle.bali.xml.model.XmlModel._validateSubtree(XmlModel.java:3669)
     at oracle.bali.xml.model.XmlModel._validateDocument(XmlModel.java:3577)
     at oracle.bali.xml.model.XmlModel.__precommitTransaction(XmlModel.java:2825)
     at oracle.bali.xml.model.XmlContext.precommitTransaction(XmlContext.java:1166)
     at oracle.bali.xml.model.XmlContext.__precommitTransaction(XmlContext.java:1653)
     at oracle.bali.xml.model.XmlContext.__commitTransaction(XmlContext.java:1684)
     at oracle.bali.xml.model.XmlModel.__requestCommitTransaction(XmlModel.java:2898)
     at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:586)
     at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:556)
     at oracle.bali.xml.model.task.StandardTransactionTask.__commitWrapperTransaction(StandardTransactionTask.java:469)
     at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:208)
     at oracle.bali.xml.model.task.StandardTransactionTask.run(StandardTransactionTask.java:103)
     at oracle.adfdtinternal.model.ide.validation.RuleEditAction.actionPerformed(RuleEditAction.java:35)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1220)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1261)
     at java.awt.Component.processMouseEvent(Component.java:6041)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
     at java.awt.Component.processEvent(Component.java:5806)
     at java.awt.Container.processEvent(Container.java:2058)
     at java.awt.Component.dispatchEventImpl(Component.java:4413)
     at java.awt.Container.dispatchEventImpl(Container.java:2116)
     at java.awt.Component.dispatchEvent(Component.java:4243)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
     at java.awt.Container.dispatchEventImpl(Container.java:2102)
     at java.awt.Window.dispatchEventImpl(Window.java:2440)
     at java.awt.Component.dispatchEvent(Component.java:4243)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)

How to add text animator to text layer in script?

Hello,
I'm a beginner in scripting and trying to create a script to apply set of expression control and text animator.
I want to add text animator property to selected layer, however I keep having error with the codes below.
selectedLayers[0].Text.Animators.addProperty("ADBE Text Animator");
selectedLayers[0].Text.Animators.addProperty("ADBE Text Position"); //error on this line
What is the correct code?
Thanks a lot.

Thanks Dan, that works!
However, I hit another road block. I tried to add a range selector under the animator group with the codes below and both returned error.
myAnim.property("ADBE Text Animator Properties").addSelector("ADBE Text Range Selector");
myAnim.property("ADBE Text Animator Properties").addProperty("ADBE Text Range Selector");
After reading this post. how to access text proprety
Its seem text animator has different codes for accessing different properties.
I've searched on the Adobe scripting guide and couldn't find the exact code for the property (e.g. ADBE Text Position 3D ).
It would be much appreciated If anyone could recommend a scripting book for After Effects.
Thanks.

How to add EDITABLE fields to PDF format?

Hi All
There is new functionality in SAP, through which we can have EDITABLE fileds PDF form in SAP. It is a new technology which SAP is providing. Can any one explain how this works with SAP?
Thanks
Aleem

Hi Aleem .
salaam.
jus snd ur mail -id.
i have a document, i vil snd it uuuu.
its a long process, so its nt posible 2 explain evertytin,
so snd ur mail id, i vil snd a documenmt with SNAP-SHOT
that vil b more helpful 2 u.
Reward if its useful

How to add edited text from photoshop to dreamweaver

I edited text in photoshop to make it look nice and sparkly. I am trying to put it in a flash site but do not understand how. the context file only allows you to choose the color and type of font but nothing more such as drop shadows and such. when i go to edit the context code for the flash site what would the code for edited text in photoshop look like in dreamweaver context editor?

I am not sure I understand? There is no Photoshop code?
You would take the image you created in Photoshop and place it into your Dreamweaver document. Correct me if I don't understand what you are trying to do.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

How do add a mask to a layer?

It may be basic but it seems confusing, please I need help

Assuming that the variable myLayer is a layer object, the collection of all its masks is: myLayer.property("ADBE Mask Parade");
and its children are the actual masks groups (which can be renamed). To add a mask to the collection you do:
var myMask = myLayer.property("ADBE Mask Parade").addProperty("ADBE Mask Atom");
Then you can set its name, color, rotoBezier attributes etc (optionnal):
myMask.name = "My mask";
myMask.color = [1,0,0];
myMask.rotoBezier = false;
myMask.maskMode = MaskMode.ADD;
To set its keyframable properties: the maskPath property has special propertyType (SHAPE).
You need to create a Shape() object like this before setting the value:
var myShape = new Shape();
// set the vertices (coordinates of the vertices in layer coordinates, not comp)
// + the inTangents (coordinates of the incoming Bezier handles with respect to the the corresponding vertices)
// + the outTangents (coordinates of the outcoming Bezier handles with respect to the the corresponding vertices)
// + the closed attributes
var w = myLayer.width, h = myLayer.height;
myShape.vertices = [[w/2, 0], [w,h], [0,h]];            // here: array of 3 "points"
myShape.inTangents = [[0, 0], [0, 0], [0, 0]];        // array of 3 "vectors"
myShape.outTangents = [[0, 0], [0, 0], [0, 0]];        // array of 3 "vectors"
myShape.closed = true;
// now set the value:
myMask.property("ADBE Mask Path").setValue(myShape);
In this example all tangents are 0 which gives a mask with straight contour.
Unless you already have your shape data ready, inserting more complexe values for tangents is not so straighforward.
Xavier.

How to Add/Edit/Delete UI Components(i.e not text values) in a UIContainer as per XML data using mxml.

Hi All,
I was asked to make a application for monitoring a remote devices and data is accessed through XMLSocket, the devices at the remote system could be added/deleted at runtime. and Web UI should act accotdingly. What is the best way of approch to implement it ?is it using mxml component or using action script?.I already implemented using mxml and could display devices in Web, for dynamic addiotion/deletion/edition of devices and its properties i'm looking for your inputs/suggestion.
thanks in Advance.

hi satyamurthy,
assign unique name to each of the UIComponents adding to the container ( default stage )
by using the name property of the components you can get the object from the container using
container.getChildByName("name assigned to the property") this function will return as DisplayObject
typecast the DisplayObject to the target class to that you can edit the object.
example:
var sp:Sprite = myContainer.getChildByName("one") as Sprite; // here I am getting sprite reference with name 'one' from 'myContainer'
sp.x=sp.x + 10; // here I am editing the property 'x' of the Sprite whose name is 'one'
Note : similarly you can perform operation on the sprite
Deleting UIComponent:
removeChild will be used to remove the child from the container where it is added
container.removeChild(container.getChildByName("name assigned to the property"));
If this post answers your question or helps, please mark it as such

How to add "edits" to an adjustment layer, corresponding to cuts in a flattened timeline below?

Similar Messages

Maybe you are looking for