How to add entry to MEMSD_DEP (Packagesize for T51) second ;-)

Hi,
ok I posted the thread "How to add entry to MEMSD_DEP (Packagesize for T51)?" before and now I have created the view and I am able to add entries to the table....
BUT:
If I try to add the entry like they are described in the help.sap.com - search for "T51 MEMSD_DEP" - I get the following error:
"Entry T51SYNCBOCONFIG does not exsist in MEMSD - check your entry."
And it is right in the MEMSD there are all my applications and patches I have uploaded in the webconsole, but no T51SYNCBOCONFIG....
Can you help me out?
Greetings,
Kai

Hi Kai Meyer-Spradow,
<<<<
one main thing ..
<b>In that documentation , they have specified that there is one MCD named T51SYNCBOCONFIG .. I think in that sense ,
it written there as ,,</b>
1. Start the transaction mi_mcd.
2. Enter the application name and choose Display MCD.
3. Choose Display <-> Change.
4. Choose the SyncBO tab page.
5. Enter the following settings for each SyncBO of type Back-End-Driven:
The object ID in the SyncBO-ObjectID column.
The delay with which the job is to be scheduled in the Interval column.
6. Choose Save.
just look at that ...
>>>>>>>
just do one think ..
If that T51SYNCBOCONFIG is not there in ur MI server , create a new MCD with this name and include ur Back - end driven syncBo to this MCD. then proceed.
These are the primary keys of the table MEMSD_DEP.
Fields           Check Table
NAMESPACE               TRNSPACET
NAME               MEMSD
VERSION               MEMSD
TYPE               MEMSD_DEPTYPE
TYPE_INDEX
DEPENDENCY_NAME
MEMSD
This table is the Mobile Component Descriptor master table.
This will contain the details of the created MCDs.
Inorder to insert values in the fields on which we have assigned the check table,
values must be present in this check table.
That means , to insert a new value in the NAME field of the MEMSD_DEP table , that entered value must be present in the MEMSD table .
If T51SYNCBOCONFIG is not in the MEMSD tabel , u cannot insert this value in the table MEMSD_DEP.
Regards
Kishor Gopinathan

Similar Messages

How to add entry to MEMSD_DEP (Packagesize for T51)?

Hi,
I would like to add an entry to the table MEMSD_DEP to configure the package size - descriped in "help.sap.com" - search for "T51 MEMSD_DEP".
But how can I do that? In the sm30 I get the message "The maintenance dialog for MEMSD_DEP ist incomplete or not defined"
We have installed SP16 without any SAP Notes. And I haven't find a SAP Note related to my problem.
Thanks,
Kai

Hi Kai Meyer-Spradow ,
just create a view for MEMSD_DEP table.
while creation , u can specify the required fields.
after activation , u can insert values into MEMSD_DEP.
steps ...
1) run the se11 transaction
2) put ur own name for ur view(starting with Z or Y) nd press create.
3)select Database View as view type
4)fill the mandatory fields like description
5)In the Table/Join condition tab fill the row with MEMSD_DEP table name
6)U can specify the required fields in the View Fields tab
7)Then in the Maint.Status tab .. , select "read and change" as access permission
8)Data Browser/Table View Main. select "X Display/Maintenance Allowed" from the dropdown
9)then just activate the view
Then u can insert new values in that table using this view.
Regards
Kishor Gopinathan

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add silver front panel theme for labview 2010

how to add silver front panel theme for labview 2010

Mahisnair wrote:
yes i had tried this way but the vi built with silver theme doesnt look good in 2010 :-(
wish if there was a way to include silver theme in 2010
The only way I see to make it like that would be to recreate the theme in LabVIEW 2010 with external bitmap objects. Unfortunately it won't be as functional as the silver controls in various terms such scaling (bitmaps scale very badly) or transparency and click through functionality (a bitmap assigned to a control part will always catch all clicks and never allow a click to pass through anywhere to a lower layered part).
The silver controls are using special internal graphic objects that were added in LabVIEW 2011, so recreating silver controls with the same functionality in earlier LabVIEW versions is impossible.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to add new tab after reason for rejection tab using tcode va01

Hello,
how to add new tab after reason for rejection tab using tcode va01.

Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

How to set a new SCSI number for a second drive?

How to set a new SCSI number for a second drive?
Walter

Walter,
This web site gives a good diagram:
http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
AO . .
A1 . .
A2 . .
If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
If you short out the pins beside AO .__. , you have designated SCSI ID One.
If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
Jim
PS
CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

How to add entries in possible fields in Account assignment model/Note 2596

Hi Friends,
I want to know How to apply OSS Note 2596, The basic requirement is to to add entries in the list of possible fields in Account assignment model( Exactly in program SAPDFKA6 in screen 120).
I found the note 2596 to achieve this, and the field that I want to add is KMZEI-PAOBJNR.
I gone through the note and it is very confusing for me .. If any one knows how to achieve this or how to apply this note, please let me know.
Thanks,
Rk

I got this myself.
Thanks,
Rk

How to add entry in OMT3R and transport it to other clients

Hello Experts,
I am adding MRP4 view to tow Z transactions. I added entry in the screen ref. key which is associated with this transaction using t.code OMT3B - Define Structure of Data screens for each sreen sequence in development configuration client.
On saving changes in OMT3B it asks me to provide TR to save the changes.
In the TR following changes are saved:
5 Modifiable
5 AR4K908159 300   KJZK584      SCMQ_NS_PR01544_Updating of the Material Master MRP4 tab
5 AR4K908160   KJZK584      Customizing Task
5 View Cluster Maintenance: Data
5 V_CM1
5 T133A
300ZM29
5 T133B
300DZM29
300EZM29
300FZM29
5 T133C
300ZM2901
300ZM2902
300ZM2903
300ZM2904
300ZM2905
300ZM2906
It also adds MRP4 view as last entry in OMT3R - Maintain Order of Main and additional Screnes automatically. Then I went to OMT3R to cange the sequence number for MRP4 view. but on clicking Save it does not ask for any TR.
When I tried copiying the TR that hold above data it only copies changes done in OMT3B and but not of OMT3R to new client.
Can anyone tell me how can I copy the changes done in OMT3R to new client? I also tried activating Automatic Transport for object V_T133S_REIHFV but it is still not asking to TR while saving.
How can I add entry for MRP4 view in OMT3R?
Awating eagerly for replies.
Regards,
Mayur Patel
Edited by: Mayur Patel on Mar 9, 2010 6:10 AM

Hi, thanks for response.
It is in BW in infosource 0FI_AP_03 Vendor Line Item I see this field in communication Structure and Isource fields. But not in ODS and Cube. All update rules are start routines.
how easy it is? how many way we have and What is best way to do?
One more thing please Add as a Field or Add as a attrib of any filed waht is best way.
Thanks
Edited by: SAP_learner on Jan 14, 2008 7:27 PM

How to add the Match code object for the requisitioner field in TCODE ME51N

Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajesh

don't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton

How to add rows in table control for data recording BDC?

hello,
pl tell me the way to upload data through BDC in table control of screen .
how to add fields inrecording of table control?
Please give some code in this regard.
I am generous in giving points..pl help!

Hi,
While doing code under recording first you need to do the recording with sample data under a particular transaction like T-code XK01 (Vendor creation).
Take an example of create vendor using T-code XK01:
Go to t-code 'SHDB' under make recording for XK01 with sample data and once if you complete the recording means after vendor creation check the source code bye by pressing the button 'Program', it shows the total coding for recording of what you entered the test data.
Then you will create one program and copy that source code of recording into your program, and now you have to remove the values at perform statement and give the internal table field name.
Like that you can develop your own code along with your validations.
my best suggestion is dont see the example code of recording method because any one for standard t-code should get the code from recording with sample data, so first tryout with your own recording method and you can understand the code step by step.
With these I hope you will get some idea of recoding method.
Let me know for further doubts.
Regards,
Vijay.

How to add get the field name for a newly added site column.

I have the following:-
Enterprise wiki site collection inside SharePoint server 2013.
I added a new site column of type managed metadata.
I opened the enterprisewiki.aspx page layout using the SP designer, to add the newly added site column to it.
But I have noted that to add any site column I need to know the field name , for example the default wiki category column is referenced inside the page layout as follow:-
<Taxonomy:TaxonomyFieldControl FieldName="Wiki_x0020_Page_x0020_Categories" EmptyValueDescriptionForTargetTemplate="<%$Resources:cms,enterwiki_nocategories_assigned%>" DisableInputFieldLabel="true" runat="server"/>
<b>
So my question is how I can know the field name for my newly added site column?
Thanks in advance for any help.
Regards

Hi,
The “FieldName” should be the internal name of the column, you will find it at the address bar at the “Site Columns”->”Edit Column” page:
Best regards,
Patrick
Patrick Liang
TechNet Community Support

XCode: how to add bison (yacc) "-p foo" for a SINGLE .ym file?

I have two pairs of tokenizers (.lm) and parsers (.ym) I want to use in pairs.
How do i add the -p "foo" option for a single file? And "-P foo" for (f)lex?
(I can add options at the target level, that much I know...)

Thanks.
For some reason, the "build" pane is not present in a framework target. I had to move the .ym and .lm files to my Application target before it became visible.
Another funny thing XCode does with the extra yacc or lex parameters is to pass them on to gcc when compiling the generated c file. So you also have to create empty files named for each prefix, or the compiler will choke.

How to add custom Template transaction types ( for Quote ) ?

How to add custom template in transaction types?
Note : I have gone through below note. But not getting appropriate solution for this.
982142.1 (OM Sales Order Template Not Available In Layout Template LOV For Print&Preview)
444687.1 (OM Quote Template Not Available In Layout Template LOV for Print And Preview)
Thanks in advance..
Sameer

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

How to add a default user group for multiple document type's?

Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
Saloni

Hi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram

How to add new tables in Streams for Schema level replication ( 10.2.0.3 )

Hi,
I am in process of setting up Oracle Streams schema level replication on version 10.2.0.3. I am able to setup replication for one table properly. Now I want to add 10 more new tables for schema level replication. Few questions regarding this
1. If I create new tables in source, shall I have to create tables in target database manually or I have to do export STREAMS_INSTANTIATION=Y
2. Can you tell me metalink note id to read more on this topic ?
thanks & regards
parag

The same capture and apply process can be used to replicate other tables. Following steps should suffice your need:
Say table NEW is the new table to be added with owner SANTU
downstr_cap is the capture process which is already running
downstr_apply is the apply process which is already there
1. Now stop the apply process
2. Stop the capture process
3. Add the new table in the capture process using +ve rule
BEGIN
DBMS_STREAMS_ADM.ADD_TABLE_RULES
table_name      => 'SANTU.NEW',
streams_type    => 'capture',
streams_name    => 'downstr_cap',
queue_name      => 'strmadmin.DOWNSTREAM_Q',
include_dml     => true,
include_ddl     => true,
source_database => ' Name of the source database ',
inclusion_rule => true
END;
4. Take export of the new table with "OBJECT_CONSISTENT=Y" option
5. Import the table at destination with "STREAMS_INSTANTIATION=Y' option
6. Start the apply process
7. Start the capture process

How to add entry to MEMSD_DEP (Packagesize for T51) second ;-)

Similar Messages

Maybe you are looking for