How to add EP 7.0 system in SOLMAN with smsy

Hi Gurus
I have solman ehp1 SPS25, want to add the managed systems through TA :SMSY
The Tabs are showing in the Landscape components are __>
1. server 2. Databases 3. Product systems (Product systems w/o product, SAP ERP, SAP SOLUTION MANAGER)
4. Technical Systems ( JAVA,..)
I want to add a EP 7.0 system in to SMSY, so i added at (server, Databases). but in the Product systems i could not able to see the SAP NW ,....)
kindly let me know how or where to add an EP system into SOlman.
Thanks in advance
Regards
Balaji

Hello Balaji
1 i think i have to configure this in http://<solmanhost>/sld by giving the path of EP system and EP systems user J2ee_admin
please correct me.
--> You have to create the data supplier bridge in your http://<ep7host>:5<instance no>00/sld under administration --> data supplier and give the path of the Sol man system with user SLDDSUSER (normally or a user with sufficient authorization). J2EE_ADMIN probably has enough rights but I wouldn't recommend placing J2EE_ADMIN in such connection as the user-id can get locked if the password is incorrect or at same point of time the password is changed and you forget to also update the data supplier user/pass.
A data supplier bridge will send updated data to the target defined in the data supplier. So after you trigger the update of your local EP7 SLD, the data supplier comes into action and you should also see the timestamp is updated in your Sol Man SLD (under technical systems search the SID of your EP7 SAP system).
2 can it be done in Portal's VisualAdmin? please correct me.
do i need to delete the existing portal system ( which configured manually) from solman smsy?
Two times yes I would recommend you cleanup your manual entries (deleting them)
Kind regards
Tom

Similar Messages

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

Hi Steve,
Thanks for your quick response. The original movies were taken on a Canon ES970 (1990's). I don't know the resolution but things were not as high tech back then.,.. I used a Roxio software to convert them on my MacBook Air. I didn't realize that I could use Adobe Premiere Elements to do that or I would have. However my old camera did not have a cable to attach it to a computer and the Roxio software came with it.
I then saved the recordings on an external hard drive. I did not make movies from them using iMovie or edit them in any way. They are simply .MOV files and they can be played on my Mac. Upon realizing how much memory it takes to work on videos, I decided it might be easier to burn DVD's on my husband's new Dell desktop that came with Windows 8. I downloaded Quicktime as suggested and still the movies can't be added to Premiere.

How to add Business Objects to system landscape smsy?

Hi there,
at the moment I configure the system landscape (smsy) in our solution manager. We have also BO XI 3.1 installations and I like to add them to the landscape. In transaction smsy I'm going to "Landscape components" -> "Product System" -> "Create New Product System" .. But now I'm not sure about the product and the product version.
Any idea?
Thanks and have a nice weekend,
Max

Hello,
You may want to review SAP Note 1507629 Preparing a BOE system for Service Sessions in Sol. Manager
There are two PDF files EGI_SBOP_EWA_Part1.pdf and EGI_SBOP_EWA_Part2.pdf attached.
They show how to define the system in SMSY.
Additionally you will need Note 1357901 CA: Managed System Setup for SAP BusinessObjects Enterprise
Because this is how the data will be collected.
And lastly once you have setup the managed system and setup the entries in SMSY, you then can create an EWA.
Hope this helps you out.
Regards,
Paul

How to add a minimize to system tray icon button?

how can i add a minimize to system tray icon button near the others common buttons usually found on the upper right window bar? (i mean near the _ [] X)
_ for minimize to taskbar
[] for maximizing
X for closing
i'd like to add a fourth button to the left of the _ button for minimizing to system tray
like in many programs the fourth button is a dot shaped one that minimizes the program to system tray
i'd like to add one to my program as well, but i didnt find anything about this kind of buttons neither on google nor on java books
can anyone help me?
thank you!

You can't (easily). The window decorations are controled by the operating system. Your best bet is to change the functionality of the minimize-to-taskbar button and make it into a minimize-to-tray button. In fact, all the programs that minimize to the tray on my computer - about 6 of them - do it this way.
like in many programs the fourth button is a dot shaped one that minimizes the program to system trayI've never seen this?

How to add node in Java system NW 7.3 ehp1

Hi Everyone,
Hoe to add node in JAva System in Nw 7.3 ehp1.
Whats are point which need to keep in mind before adding node?
Regards
Adil

Hi Adil,
Follow the below steps
1.Start the Config Tool by double-clicking the configtool script file in <SAP_install_dir>/<system_name>/<instance_name>/j2ee/configtool directory.
2.choose the Java instance according to the level you want to make configurations.
3.Choose the Servers tab.
4.In the Custom Number of Server Processes field, enter the number of server processes you want to have. Click on set and save the configuration
Choose Check Value to verify that your server is capable of handling the number of server processes you entered. Correct the value if necessary.
Restart the java engine.
You need adjust the heap memory accordingly
SAP Note 723909 - Java VM settings for J2EE 6.40/7.0
Checked the sapnote if java don't come up
1658950 - J2EE System fails with "exitcode = -2"
http://scn.sap.com/community/performance-scalability/blog/2013/08/29/java-memory-sizing-procedure-pragmatic-approach
With Regards
Ashutosh Chaturvedi

How to Add a Miscellaneous expenses On an Invoice With Match ?

hi,
I Want To Add a Miscellaneous expenses On an Invoice With Match By a Different currency ,
an example :- When Enter An Invoice With Match " 100$ " and Pay It Then I Want To Add a Miscellaneous expenses On This Invoice By Different currency " 100 eur "
How to Process This Case ??
Thanks,
Mohamed Gamal

one line is 100 us
the other is 100cu
is it ok ?

How to add program to windows system tray?

I heard from someone that in order to add a program to the system tray, I must use JNI. I want to ask whether there is any other alternative. If not, how do I go about doing it using JNI.
Thanx in advance.

You can use the JTray API (Java System Tray API For
Windows) that can be found at http://www.JavaAPIs.com.
It supports several image types, animation, and
display of AWT and Swing Components as pop-ups. I always find it rather annoying when people scour past posts to promote a product that they have a vested interest in.
Especially when they don't point out that that they have such an interest.
Especially when they don't point out that the interest is monetary.
Especially when they do nothing but post ads - never actually answering a single question.
Just me I suppose.

How to add text vertically into a Word margin with C# (using namespace: Microsoft.Office.Interop.Word)

I need to add text vertically in a word document outside the margins. How can I do this with Microsoft.Office.Interop.Word and C#?
Leonard Swarczinski Software Developer Postal Center International

Hi Leonard,
According to your description, do you want to add text vertically into Page Header/Footer? I wrote a sample for you.
using Microsoft.Office.Core;
using Microsoft.Office.Interop.Word;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace AddTextToWord
class Program
static void Main(string[] args)
CreateNewDocument();
Console.ReadLine();
private static void CreateNewDocument()
Object oMissing = System.Reflection.Missing.Value;
Microsoft.Office.Interop.Word.Application oWord;
Microsoft.Office.Interop.Word.Document oDoc;
oWord = new Microsoft.Office.Interop.Word.Application();
oWord.Visible = true;
oDoc = oWord.Documents.Add(ref oMissing, ref oMissing, ref oMissing, ref oMissing);
String HeaderText = "Hello everyone!";
WdParagraphAlignment wdAlign = WdParagraphAlignment.wdAlignParagraphCenter;
AddHeader1(oWord, HeaderText, wdAlign);
private static void AddHeader1(Application WordApp, string HeaderText, WdParagraphAlignment wdAlign)
Object oMissing = System.Reflection.Missing.Value;
WordApp.ActiveWindow.View.Type = WdViewType.wdOutlineView;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekPrimaryHeader;
Microsoft.Office.Interop.Word.Shape textBox = WordApp.ActiveDocument.Shapes.AddTextbox(MsoTextOrientation.msoTextOrientationVertical, 150, 10, 40, 40);
textBox.TextFrame.TextRange.Text = HeaderText;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekMainDocument;
If I misunderstood or anything wrong, please let me know and you can get more information from below articles.
Office development in Visual Studio
http://msdn.microsoft.com/en-us/office/hh133430.aspx
Abhout: AddTextbox Method
http://msdn.microsoft.com/en-us/library/office/aa171543(v=office.11).aspx
How to: Programmatically Insert Text into Word Documents
http://msdn.microsoft.com/en-us/library/vstudio/6b9478cs.aspx

How to add a field in standard tcode pa30 with info type 21.

Hi Experts
I need to add a field Child Allowance Entitlement in PA30 transaction where infotype is 21, this field is available in table P0021 but which is not active in standard transaction.
I just check in SPRO Settings - > Personnel Management - > Personnel Administration -> Customizing user Interface -> Change screen modificaion -> in that i gave the module pool number as mp002100 and screen number as 2000. the field is not shown there. but in alternative screen 2005 that field is available how can i display that field in the standard transaction pa30 with infotype 21.
Can anyone please suggest me to display the field in the standard transaction.
Regards,
Vijayan.R

Hi Vijayan,
to modify the infotype screen for your purposes, you have to maintain feature P0021 as mentioned above, in order to obtain your screen modifier.
Usually this modifier is equal to your corresponding MOLGA.
This modifier is then used in V_T588M, when you can assign alternate screen modification to your modifier.
Let`s say :
Modifier 06 - France - Screen 2000
Modifier 01 - Germany - Screen 2000 with some hidden fields.
I hope it helps
Best regards
Ondrej
Edited by: Ondrej Smutny on Aug 15, 2011 10:38 PM

How to add a column in Item Master form with chooselist

Hi Experts
I add a column in Item Master Form in Stock Data Tab. In this column I want to add Choose list. For this I use AfterFormLoad event. It gives Error "Matrix Line Exist" . My code is given below
If pVal.FormType = "150" Then
                form = B1Connections.theAppl.Forms.GetForm(150, pVal.FormTypeCount)
                form.PaneLevel = 3
                oItem = form.Items.Item("28")
                oMatrix = oItem.Specific
                Dim chooseObj As ChooseListClass
                chooseObj = New ChooseListClass
                chooseObj.AddChooseFromListBinCode(form.UniqueID)
                oColumns = oMatrix.Columns
                oColumn = oColumns.Add("BINCODE", BoFormItemTypes.it_EDIT)
                oColumn.Width = 100
                oColumn.DataBind.SetBound(True, "OITW", "U_BINCODE")
                oColumn.TitleObject.Caption = "Def BinCode"
                oColumn.Editable = True
                oColumn.ChooseFromListUID = "CFL5"
                oColumn.ChooseFromListAlias = "U_BinCode"
                oColumn = oColumns.Item("U_BINCODE")
                oColumn.Visible = False
            End If
please give your suggestion
Regards
Jitender

Hi Noor
Thanks for reply
I tried your suggestion but problem still there. I am using after form load event. Here matrix has 9 lines (all warehouse). If remove the line then how can I reload warehouse data. Can you suggest in more detail.
my code is given below
form = B1Connections.theAppl.Forms.GetForm(150, pVal.FormTypeCount)
                form.PaneLevel = 3
                oItem = form.Items.Item("28")
                oMatrix = oItem.Specific
                MsgBox(oMatrix.RowCount)
                oMatrix.DeleteRow(1)
                Dim chooseObj As ChooseListClass
                chooseObj = New ChooseListClass
                chooseObj.AddChooseFromListBinCode(form.UniqueID)
                oColumns = oMatrix.Columns
                oColumn = oColumns.Add("BINCODE", BoFormItemTypes.it_EDIT)
                oColumn.Width = 100
                oColumn.DataBind.SetBound(True, "OITW", "U_BINCODE")
                oColumn.TitleObject.Caption = "Def BinCode"
                oColumn.Editable = True
                oColumn.ChooseFromListUID = "CFL5"
                oColumn.ChooseFromListAlias = "U_BinCode"
                oColumn = oColumns.Item("U_BINCODE")
                oColumn.Visible = False
                oMatrix.AddRow(1)
Thanks
Waiting for reply
Regards
Jitender

How to add a column to a list created with the Dynamic List Wizard to display the values of the fiel

Hi,
ADDT, Vista, WAMP5.0
We have 2 tables: clients_cli (id_cli, name_cli, tel_cli, and several more fields) and cases_cas (id_cas, idcli_cas, court_cas, and a lot of other fields).
Clients may have many cases, so table cases_cas have a foreign key named idcli_cas, just to determine which case belongs to which client.
We designed the lists of the two tables with the Dynamic List Wizard and the corresponding forms with Dynamic Form Wizard.
These two forms are linked with the Convert Dynamic List and Form Wizards, which added a button to clients list named "add case".
We add a client and then the system returns to the clients list displaying all clients, we look for the new client just added and then press "add case", which opens the Dynamic Form for cases, enter all case details and everything processes ok.
However, when we view the cases list it display all the details of the case, including the column and values for the foreign key idcli_cas. As you can image, it is quite difficult for a human to remember the clients ids.
So, in the cases list we added a another column, named it Name, to display the names of the clients along with cases details. We also created another recordset rsCli, selected the clients_cli table, displaying all columns, set filter id_cli = Form Variable = idcli_cas then press the Test button and everything displays perfect. Press ok.
Then, we position the cursor inside the corresponding cell of the new Name column, go to Bindings, click on name_cli and then click on insert. The dynamic field is inserted into the table cell as expected, Save the page, and test in browser.
The browser call the cases list but fails to display the values of the Name column. The Name column is simply empty.
This issue creates a huge problem that makes our application too difficult to use.
What are we doing wrong?
Please help.
Charles

1.     Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen.
2.     Choose List Screen.
3.     In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
4.     In the Screen Number field, enter the screen number of the list screen you want to enhance.
5.     Choose Create.
The Dictionary: Initial screen appears:
6.     Create the list screen structure.
7.     Choose Activate.
8.     Return to the Enhance List Screen in the Enhance Infotypes transaction (PM01).
9.     Choose Create All.
The additional fields are displayed on the list screen, however, they contain no data.
The fields can be filled in the FORM routine FILL-LISTSTRUCT in the generated program ZPnnnn00. The FORM routine is called for each data record in the list.
Structure ZPLIS is identified when it is generated with a TABLES statement in the program ZPnnnn00.
The fields can be filled from the Pnnnn structure or by reading text tables.

How to add new rows in Advanced Table along with attribute value?

Hi,
I have one advanced table that contain one messageChoice and messageTextInput field.
I want to add new rows in advanced table. I can able to add rows using the AddMoreRows button in the footer of the advanced table,
but I want to add attribute value(contactId) each time when new row created.
contactId I am getting from pageContext.getParameter("contactId")
How to achive this? Please suggest.
Thanks & Regards,
Sunita

Hi,
There are two ways to do it.
1. Use create method of entity object, create method fires whenever you creates new row.
2. Handle the event raised by addanotherrow button and write logic there to initialize contactid as you are getting contactid from pageContext so I will suggest you to use this method.
if (tableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM)))
&& ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
//write your logic here to default the contact id
Hope this will help.
Regards,
Reetesh Sharma

How to add itunes and iphone to new computer with out losing contents on iphone

Im trying to add itunes to a new computer and when i go and update my iphone to the new computer it wants to wipe everything off it and start new cause i have it on an old computer how do i fix this

Copy the entire /Music/iTunes/ folder from old computer to /Music/ on new computer.
and also copy any other data you want from old computer to new computer.

My iphone crashed and lost all data. how do i upgrade the operating system then sync with itunes?

My iphone 3g crashed. My calendar and contacts don't appear on itunes. how do i sync with itunes? should I upgrade operating system first? how to do that?

"My calendar and contacts don't appear on itunes. "
Your calendar ond contacts should be on your computer in whatever program you have selected to sync.
"how do i sync with itunes? "
You sync as you always have.
"should I upgrade operating system first? "
If you like.
"how to do that?"
Open itunes, cconnect iphone. Itunes should tell you if there is an update avilable or you can click Check for Updates.

How to add a form to a public site with sharepoint online 2013 (plan2)

We need to add a form to a public site: in particular a form where candidates can apply submitting some info and sending a file (cv).
What would you recommend to use?
Thank you,
ER

No, our Sharepoint is not bundled in any of office 365 subscriptions.
It's a simple SPO Plan 2 subscription.
I don't know if it makes any difference though.

How to add EP 7.0 system in SOLMAN with smsy

Similar Messages

Maybe you are looking for