How to add EP(DEV and QAS and PRD systems in solution manager)
Dear Gurus,
I want to include EP dev and qality and prodution systems in solution manager .
While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
How to see developmnet and quality systems in maintenace optimizer.
Same thing for ECC also.
ECC dev and quality systems installed in the same server.
In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
Can any body help this probelm.
Thanks & Regards
Rao.
I think you need to adjust your filter settings in the initial screen of MOPZ.
It's in the right top corner.
Similar Messages
-
Add BI System in Solution manager
Hi All,
I need to add BI DEV, BI PRD Systems to solution manager. As per my understanding first i need to create logical systems, after wards i have to add this system in SMSY.
I will be glad if some one can post ur suggestions and procedure to add this
ThanksHi,
this is same for all the system. only you have to select appropriate product instance
please refer this screenshots here [SMSY Set Up|http://www.way2sap.com/sap-article/adding-a-sap-system-to-smsy-of-solution-manager-1907/]
get the other set up guides on service.sap.com -> release and upgrade info -> installation and upgrade guide -> SAP components -> SAP Solution Manager -> Operation guides.
Thanks
Jansi -
How to add new currency in ORCO and ORBO
Hi, I have successfully install ORCO, ORBO and ORPOS. I followed Implementation Guide, Volume 1 – Implementation Solutions to add new currency in ORPOS.
But I still do not know how to add new currency in CO and BO.
I try to use import parameter feature in ORCO and ORBO to import xml, the result said "Success" but there is no changes.
Please help show how I could achieve this.I change the FL_CNY_BASE into 1 already. POS is OK now. But BO is not regconize that there is a new currency. I'm trying to go to
Admin -> Job Manager -> Available Import -> Import BackOffice Parameters
and try to import xml file that contain belowing content.
<?xml version="1.0" encoding="UTF-8" ?>
<CurrencyImport xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CurrencyImport.xsd" Priority="0" FillType="FullIncremental" Version="1.0" Batch="1" CreationDate="2001-12-17T09:30:47.0Z" ExpirationDate="2027-12-17T09:30:47.0Z">
<!-- Example of adding a Currency. -->
<Currency ChangeType="ADD" ISOCode="MYR" IssuingCountryCode="MY" Name="MYR" IssuingCountryNationality="Malaysian" IsBaseCurrency="true" Scale="2" Priority="0" />
<ExchangeRate ChangeType="ADD" CurrencyCode="MYR" MinimumAmount="0.00" EffectiveDate="2008-05-26" ExpirationDate="2050-06-02" ToBuyAmount="2" ToSellAmount="2" ServiceFeeAmount="0.00" />
</CurrencyImport>
The result said it success but I still cannot see any change.
Is there is any other things I should make change at BO? Any property file that I should make change? BO and CO is web application so the structure of files are not the same as POS. I can't following the same thing when I had made with POS for BO and CO.
Thanks for you helping -
How to add my html title tag and html meta name and meta keywords
how to add my html title tag and html meta name and meta keywords in iweb 09
Like you will see on Roddy's page iWeb SEO Tool will do the job very easily:
Click to view full size
Click to view full size
It remembers what tags went to which pages so they are easily reapplied when you have to republish.
OT -
How to tranport XI config from DEV to QAS or PRD
Dear Sir,
We would like to know How to tranport XI config from DEV to QAS or PRD
Thank you and best regards,
VimolHi,
Check some links on transporting Objects.
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful -
How to add more disk space into / root file system
Hi All,
Linux 2.6.18-128
can anyone please let us know how to add more disk space into "/" root file system.
i have added new hard disk with space of 20GB,
[root@rac2 shm]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 965M 767M 149M 84% /
/dev/hda7 1.9G 234M 1.6G 13% /var
/dev/hda6 2.9G 69M 2.7G 3% /tmp
/dev/hda3 7.6G 4.2G 3.0G 59% /usr
/dev/hda2 18G 12G 4.8G 71% /u01
LABLE=/ 2.0G 0 2.0G 0% /dev/shm
/dev/hdb2 8.9G 149M 8.3G 2% /vm
[root@rac2 shm]#Dude! wrote:
I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
Simple stats. Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
2 disks buy you 2 tickets in The-Drive-Failure lottery.
Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive. -
How to add a system into Solution Manager directory.
Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip BhattacharyyaHi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher -
How to add tape drive in hyper V operating system
how to add tape drive in hyper V operating system
tape drive may be to scsci or USB port.
how to add pls suggesthow to add tape drive in hyper V operating system
tape drive may be to scsci or USB port.
how to add pls suggest
You need something like StarWind Tape Redirector that "iSCSI-izes" hardware attached to host. So you'll be able to connect with iSCSI initiator from inside a VM running on this host, some other host or even other physical machine (as long as it
has iSCSI connectivity), see:
StarWind Tape Redirector
http://www.starwindsoftware.com/download-starwind-tape-redirector
So at the end of the day you'll have something like on the picture below:
Good news: this software offering is 100% free so you don't need to pay anything to anybody :)
Hope this helped!
StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
Add sap R/3 enterprise system in solution manager SLD
Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
ShahidHi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday -
How to create Rfc for EP system in Solution manager
Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving " NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhirajHello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC 1
- CTS_SYSTEM_TYPE JAVA (others for a MDM system)
- NON_ABAP_SYSTEM 1
- COMMUNICATION_SYSTEM: (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY TAGGED
- WBO_REL_REQ_STRATEGY MANUAL
For quality and production Java system (target systems):
- CTC 1
- CTS_SYSTEM_TYPE JAVA (others for a MDM system)
- NON_ABAP_SYSTEM 1
- COMMUNICATION_SYSTEM: (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ -
How to remove Production System from Solution manager.
Hi All,
We have Three system landscape and solution manager installed.
All the system are managed by Solution manager.
here we are looking to remove the Production System from Solution manager.
as in case if is there any problem in solution manager then we are not dependent on it.
things will work directly on Production system.
Could you please let us know the procedure to remove the system from solution manager.
Please let us know if is there any document provided by SAP.Hi,
Have you implemented charm,ccms monitoring or any other functionalities?
if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
Does your production system data coming from SLD?
if yes, Delete the entry from SLD
if both the answer is no.
1.delete RFC from SOLMAN to the production systems.
2. delete the production system using SMT2 transaction.
3. Remove system rom SMSY from SOLMAN.
Thanks,
Jansi -
How to configure satellite system in Solution manager
Hi,
Please advise me how to configure satellite system in solution manager.
Regards,
AsifHi,
can you check this installation guides
[ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
Regards,
Muralidhar -
How to add swap in solaris 11 and still will take effect even you restart the server
Hi,
I would like to ask on how to add swap file in solaris 11 will still take effect even you restart the server.
swap -l
zfs create -V 2G swappool/swap2
swap -a /dev/zvol/dsk/rpool/swap2
Regards,
AndrewHi Andrew,
After completing the steps above, you will need to add an entry for the new swap volume to the /etc/vfstab as described in this doc if you want the swap volume to be used when the system is rebooted:
Adjusting the Sizes of Your ZFS Swap and Dump Devices - Managing ZFS File Systems in Oracle® Solaris 11.2
Thanks, Cindy -
Can we transport BW QUERY VARIANT (created in DEV) to QAS and PRD?
Hi gurus,
I created a lot of QUERY VARIANT ( parameters saved when we execute queries ) in BW DEV.
I am using those variants in my Analisys Process Designer and i do not want to create again in QAS and PRD.
Somebody knows how to transport those variants?
Is possible to assign by SE03? What is the code that object?
Thanks for any Help!!!
Carlos Eduardo OlintoI transported my Query Variants.
- Variants must be created in DEV
- Download the records from:
> tables
RSRVARIANT
RSRVARIANTDIR
RSRVARIANTTXT
> Filter Field: VARI = "Query Variants Code"
- Create request in DEV
- Assign R3TR TABU <Table name>
Tables:
RSRVARIANT
RSRVARIANTDIR
RSRVARIANTTXT
- Save the contents in each table (Only KEY FIELDS)
- Verify the Lenght in each field, it must be correct (no spaces for each Field)
I hope it helps you!
Carlos Eduardo -
How to add standard text in PO and how it is maintained ?
How to add standard text (paragraph) in PO and how it is maintained ?
Hi
Please go through this document.which has a step by step
Working with Frequently Used Texts
Use
You can copy texts from various sources to create PO texts:
Standard texts
Certain standard texts are supplied with the system and can be assigned to a purchasing document in Customizing.
The content of some standard texts is predefined by your system administrator.
You can also create standard texts yourself and copy them into purchasing documents.
Master records
Database fields
Activities
Creating Standard Texts
You can create your own standard texts via Tools ® SAPscript ® Standard text.
Inserting Standard Texts
You can insert your standard text on the long text screen via Insert ® Text ® Standard.
For more information, refer to the Basis documentation under BC Word Processing with the SAPscript Editor: Including Texts.
You can display the print preview via Text ® Print ® Print preview.
Inserting Texts from the Master Record
There are three ways of linking texts from a master record with a purchasing document. The relevant settings are made for each text type in Customizing for Purchasing. The indicator in the status column shows the nature of the linkage.
Option Indicator in status column
The text is copied:
It is then independent of the text None
in the master record. Changes to
the text in the material master record
have no influence on the text in the document.
The text is displayed only:
It cannot be adopted. N
The text is offered for copying:
It can be copied via Header or Item ® Texts ® Adopt text. (In requisitions: Goto ® Texts ® Adopt text.) Changes made in the master record will also be adopted in the document until such time as you copy the text.
Inserting Texts from Database Fields
You can include the content of a database field at any point in the text on the long text screen. A value specific to the relevant document is displayed in the printed document.
Choose Insert ® Symbols ® Program symbols.
Choose DDIC fields.
Search for the relevant table/structure (in the case of PO items, this is EKPO) and then choose ENTER .
Choose the relevant table field.
Choose Text ® Print preview to see the print preview.
Reward if useful
Aasif
Maybe you are looking for
-
Characterstics variable with replacement path?
hi friends, what scenerio we use characterstivs variable with replacement path in reporting? Thanking u suneel.
-
Send process chain in error by abap
Hi all, I want to send in error my process chain by abap code, because i've a routine in transfer structure and on the particular conditions this code must stop the load. How to send in error my process chain by abap? The following code send in error
-
Restore of file from content server
Hello all, Is it possible to restore file which is deleted from the content server? If yes state the procedure or steps how to do it. Regards, Punam
-
16:9 movie squished in iDVD
I have a movie all finished in FCP..16:9 when I pull it into iDVD (from iLife) the movie is squished. if I first "fix" the pixel dimensions in QT pro, the movie comes in at the right aspect ratio, but my titles, created in FCP, are nasty-looking and
-
What port type should i use?
I am using Seebeyond as middleware and it sending Vehicle IDoc VEHCLE01 to SAP System. Please help me what should port type I need to use? Should it be file port or t-rfc port? What should partner type need to use? Can it be LS type? Is it ALE or EDI