How to add estimated additional charges to PO lines

Hi all,
As a business need I want to add estimated additional charges to PO lines like bank expenses, transportation and misc duties.
it was available with process manufacturing inventory items by using aquisition cost window.
But, how could it be applied with discrete inventory items??
if anyone has a solution plz advise.
Thanks

Dear Walid,
There is no standard functionality available in Oracle to capture the Estimated Additional Charges. You have to create a custom component for this....
Regards
Merlin Rajesh

Similar Messages

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

How to add an additional email account in Mail?

Hi,
I set up my main 'Hotmail' email address in 'Mail' about a year ago but have never used the Mail App since. I now have a 2nd email address (university) and it is hosted through 'Exchange Labs' which is basically Hotmail/MSN I think. I cannot check my emails in each one without logging out and logging in whilst openinging and closing several web pages which is a nuisance.
I was told I could link these 2 accounts in Mail and would make life easier. However, I went to add an additional account and it's asking me for the server info - (mail.server.com) which I have no idea what Exchange Labs use. I looked at my settings for my Hotmail address and when I was setting it up I used my 'izymail' subscription to make it work. However when I go into Mail, it shows no new emails, or any of my old ones. I think i'll have to play around with it for a few hours before I figure out what's wrong but can anyone offer any advice?
How to link an 'Exchange Lab' email account or make sure my existing hotmail account is still linked properly?
Thanks in advance!

Unless Hotmail is required under EU law to provide their full service free of charge, you'd have to have a paid Hotmail account to be able to send and receive email with Mail.
As for the Exchange Labs, that's something your university is doing, so you'd need to call their student computing helpdesk for the settings to enter in Mail to setup your account for that. You can't link these two accounts, but you can have Mail send and receive messages through both accounts individually, assuming you meet the requirements and have them setup properly. It's not hard, you just need to get the necessary info from your university IT department, as well as have POP access to your Hotmail account, which they do charge for in the U.S.
Mulder

How do I remove access charge on suspended line?

I have two suspended lines on our More Everything Plan. How do I remove access charge on both these lines?@

tanishas_vzw - I think you mean that the lines need to be suspended "without billing, i.e., from the FAQ in the link:
Suspended with billing You'll be billed for all services and features during the suspension period. However, your contract and upgrade eligibility dates won't be impacted. If you subscribe to Equipment Protection, coverage continues throughout the suspension period. This includes Asurion Wireless Phone Protection (WPP), Total Equipment Coverage (TEC), Total Mobile Protection (TMP), and Extended Warranty (EW).
Suspended without billing You won't incur voice, data or feature charges while your service is suspended*. Monthly Verizon Edge payments will continue under your Verizon Edge contract. If you choose this option, your contract and upgrade eligibility dates will be extended for however long your line is suspended. If you subscribe to Equipment Protection, coverage continues throughout the suspension period. This includes Asurion Wireless Phone Protection (WPP), Total Equipment Coverage (TEC), Total Mobile Protection (TMP), and Extended Warranty (EW).

2 4404's and WCS how to add an addition 4404

We have two 4404's and WCS. The 4404's are almost maxed out. We have an addition 4404 which we would like to add to the group of 4404's. What is the best way to do this?
Thanks

If both on-line 4404 share the same configs (particulary the SSID and other stuffs) then copy the config into the new one (make sure the new one is off-line so IP addresses won't clash).
Change the IP addresses of the new 4404.
Add into WCS.

How to add 2 Additional Monitor into my iMAC using ONE Thunderbolt

1. I would like to attach 2 units of Samsung 27" which supports maximum resolution of 1920 by 1080 into a single Thunderbolt. How should I do that?
2. As my other Thunderbolt is kept for Storage purpose and my Firewire is used to plugin my external sound card.
Any good suggestions
and please suggest me that, whether the performance quality of the picture on the both Samsung 27" will be compromised or not?? Will I have exact quality as in my iMac or different?
What kind of cable should I buy.
My Samsung monitor supports HDMI and DVI Input.
All together I will be having 3 monitors (iMac, Samsung , Samsung)

DanStan, Welcome to the discussion area!
FYI, this is the discussion area for the iMac G4.
The iMac G4 does not have a mini-DVI output.

How to add an additional fields in VAR Service Desk?

Dear ALL,
I work in VAR company and we use SAP VAR Service Desk. Our Customer has his own HP Service Desk system. When they creates ticket in SAP VAR Service Desk they are allways creates internal Service Desk number in their HP Service Desk. Now they ask us to create the new field named as "Customer SD number". I searched for the invisible fields but nothing found. And I think it should be like:
1) Field named as "Customer SD number" and the input field for the Customers HP Service Desk Number
2) Field on the main scrren of Service Desk where is all tickets.
But this only my assumption, I didn't made like this work before.
May be there is standard schema? I read the integration, but I can not do this because we have other customers with their own Service Desk systems.
Please help.

Dear Ahsan Rizvi
you have take ABPER help
Documentation of the FM BAPI_PO_CHANGE says:
Function module BAPI_PO_CHANGE enables you to change purchase orders. The Change method uses the technology behind the online transaction ME22N.
As we can insert a new item in the ME22N, it will allow us to insert a new PO Line using this FM.
Regards,
shankar

How to add new additional field in my selection screen?

Hi,
In the BEx ,I have key and name in my report.While seeing the report, heading for customer number is coming and heading not coming for customer description.I need to have it in my report.
I.e
Customer     !     (This heading is missing)
   7     GABRIEL CHEMIE GMBH - AUSTRIA
   9     BERGER PAINTS BANGLADESH LTD.
Any tips? Points will be given.
Regards,Jaheer

Hi Jaheer ,
                 If you talking Abuot heading in out put screen then use TOP-OF-PAGE
or Else you use "Write:/ " Statement in you program...So that when first line is complete it will go to next line...
What I understand from your Question....
Souman

How to add form values into a single line...

How can we add numerous form values (say surname, first name and middle initial) into a single line? thanks in advance^^

You can use the "+" operator which is both the addition (number) and concatenation (string) operator. JavaScript makes the decision about how this operator will work by the type of the value of being processed. Two numbers JavaScript performs addition, character string and number, number and character string, or 2 character strings then concatenation.
If you just use the '+' operator and spaces, you will get extra spaces unless you add code to allow for null fields and adjusting the spacing or other punctuation as needed. You may also need to force numeric values to character stings or you might end up with an addition and not concatenation.
Adobe provided a example of a funciton to properly join 3 fields with full versions of Acrobat:
function fillin(s1, s2, s3, sep) {
// Concatenate 3 strings with separators where needed
// convert passed strings to a string value
s1 = s1.toString();
s2 = s2.toString();
s3 = s3.toString();
// assign a numeric value for presence of a given string(s)
var test = 0; // no passed strings
if (s1 != "") test += 1; // s1 has a value
if (s2 != "") test += 2; // s2 has a value
if (s3 != "") test += 4; // s3 has a value
// return appropriate combination based on passed strings
if (test == 0) return ""; // no stings passed
if (test == 1) return s1; // s1 only
if (test == 2) return s2; // s2 only
if (test == 3) return s1 + sep + s2; // s1 and s2
if (test == 4) return s3; // s3 only
if (test == 5) return s1 + sep + s3; // s1 and s3
if (test == 6) return s2 + sep + s3; // s2 and s3
if (test == 7) return s1 + sep + s2 + sep + s3; // s1, s2, and s3

Additional Charges for transportation.

We use transportation management for our shipments to and from the DC and within stores.
There is a new requirement to add some additional charges to the some of the shipments. I am trying to understand what is the best way to implement this.
During the winter months, for some of the transportation there is additional changes such as heated transportation so there will be heat charges added to the normal transportation rates in the cost document. This could be a fixed value or percentage charge.
I am thinking of creating new special processing indicatior and making them same as the existing ones but with the added heat charge.
Is that the best option or is there another way.
I am really looking for a solution for this...

Thanks for the reply Mike.
I would like to propose different options to the client.
I am thinking setting up as condition (through TK11/TK12 for the combination of Porg, service agent and special processing indicator) is required as they dont want to add this in each document all the time. So I was thinking of creating a new special processing indicator, setting up the conditions for then and just adding this to the stages in the shipment doc.
I like the idea of making this come up for a certain date or period. How can you make that happen?
Is there any other option other than the conditions/special processing indicator. Like I said for some forwarders this is % based and for some it is fixed value for a certain KM.

How to add other 2 control files at ASM in linux RAC

Hi Experts,
I am new for RAC .
the vendor build a RAC for us. I found there are only one control file in system.
we use oracle 10.2.0.4 at ASM with RAC in redhat linux 5.
how to add 2 additional control file to ASM for RAC ?
Please provide a procedur in detail.
Thanks
Jim

Hi damorgan & Friends,
I could not find some infomration to add control into ASM . I can do this job( see below procedure) in no ASM .
My question, our database locates at ASM and control file with a system auto-number ( fully qualified filename ) as
+DATA1/SALE/controlfile/current.256.690290159
How do I physical copy and rename other 2 contril file in directory and modify location in pfile?
I saw some paper to use request as an alias (such as +dgroup2/control/ctl.f). i can not image to copy/rename control.
Please help me!!
Thanks
Jim
========added control file for no ASM database and works=====================
1)
SQL> create pfile from spfile;
File created.
2)
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL
3)
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
4) modify pfile add additional control file2/3 as
control_files='C:\Oradata\ORCL\control01.ctl','C:\Oradata\ORCL\control02.ctl','C:\Oradata\ORCL\control03.ctl'
and physical copy control01.ctl and raname as control02.ctl,control03.ctl
5)
SQL> startup pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1247900 bytes
Variable Size 62915940 bytes
Database Buffers 100663296 bytes
Redo Buffers 2945024 bytes
Database mounted.
Database opened.er database mount;
6)
SQL> Create spfile from pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
File created.
7) check control file info under pfile environment
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
C:\ORADATA\ORCL\CONTROL02.CTL
, C:\ORADATA\ORCL\CONTROL03.CT
L
8)SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
9) startup as spfile environment.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1247900 bytes
Variable Size 62915940 bytes
Database Buffers 100663296 bytes
Redo Buffers 2945024 bytes
Database mounted.
Database opened.
10) check control info for spfile environment
SQL> show parameter spfile
NAME TYPE VALUE
spfile string C:\ORACLE\PRODUCT\10.2.0\DB_2\
DATABASE\SPFILEORCL.ORA
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
C:\ORADATA\ORCL\CONTROL02.CTL
, C:\ORADATA\ORCL\CONTROL03.CT
L

Add a additional field in tcode XK02 - control screen

Hi,
I have to add an additional field in Tcode XK02 ie., in Control Screen, I couldn't find any screen exits. I hvae found one BADI VENDOR_ADD_DATA_CS .I have added a New field in Table LFA1 (the new field is T5UNT-NAICS ) through Append Structure but the append strcture is Partial Active. Also, how to add an additional field in the control screen of tcode XK02 using this BADI.
1. How to make theAppend structure Active
2. How to add a screen field using this BADI
Regards,
Deeephi.

1. My table was partial active...so go to se11,Enter LFA1 in display mode, Go to Path Utilities-database utility.now click on Activate and Adjust database.it will activated fully.
2.
a) create a module programme with the the screenfield(LFA1-NAICS) that you want.
b) In pbo of module pool,enter following code
data : l_zfield type lfa1-NAICS.
constants: c_zfield(10) value '(SAPMF02D)LFA1-NAICS'.
field-symbols: <fse>.
assign (c_zfield) to <fse>.
if sy-subrc = 0.
    l_zfield = <fse>.
endif.
If sy-tcode = 'XK02'.
     Loop at screen.
          If screen-group1 = 'Z1'.
               Screen-input = 0.
               Modify screen.
          Endif.
     Endloop.
Endif.
c)create a Screen group(Z1) as sushipal reddy showed int he atatched link.
d)go to Method IF_EX_VENDOR_ADD_DATA~CHECK_ADD_ON_ACTIVE and add following code
if i_screen_group = 'Z1'.
e_add_on_active = 'X'.
endif.
e)Go to method IF_EX_VENDOR_ADD_DATA_CS~GET_TAXI_SCREEN and type following code
IF sy-tcode EQ 'XK02'.
    e_screen = '0101'.
    e_program = 'Z_ADD_FIELD_XK02'.
   e_headerscreen_layout = 'E'.
ENDIF.
f)thast it...go to xk02 u willl see an al push button and click on it..u can view the screen field...

How to add a property to BasicPersistence SDK example.

Hi,
I see in the BasicPersistence example that it creates a property call BPIData and persists this in the IDML. I would like to add another property call MyProperty. Do you know how to add an additional property to the example which is persisted in the IDML, so now it would persist 2 properties?
Thanks,
Dave

for example:
javax.jcr.Session session = resourceResolver.adaptTo(Session.class);
String parentPath = "/content/blah"; // or whatever your parent path is
String nodetype = "nt:unstructured"; // or whatever other node type you require
Calendar calendar = Calendar.getInstance(); // or whatever date
Node node = session.getNode(parentPath).addNode("nodename", nodetype);
node.setProperty("myproperty", calendar);
session.save();

How to add a Cipher Suite using RSA 1024 algorithm to the 'SSL Cipher Suite Order' GPO

Following a VA test the Default Domain GPO has been set to enable the SSL Cipher Suite Order. Following the change Symantec Endpoint Protection Manager doesn't work properly as the the Home, Monitors and Reports pages are blank and an Schannel error is
logged in the SEPM server's event log.
I have spoken to Symantec and I have been told that we need to allow the RSA 1024 bit algorithm but they can't tell me which cipher suite this would be. I have looked in the GPO setting and can't see an RSA 1024 suite but have found some in this article:
http://tools.ietf.org/html/draft-ietf-tls-56-bit-ciphersuites-01
I want to know how to add an additional cipher suite into the setting safely. Am I able to just add the suite into the GPO setting (eg TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA) or do I need to do anything else beforehand?
If anyone has any advice regarding this or cipher suite orders and troubleshooting SSL problems it would be much appreciated,
Thanks
Chris

Hi Chris,
Based on my research, RSA_EXPORT1024_DES_CBC_SHA is a previous cipher suite, which is supported, you can enable it use
SSL Cipher Suite Order policy setting under Administrative Templates\Network\SSL Configuration Settings.
More information for you:
TLS/SSL Cryptographic Enhancements
http://technet.microsoft.com/en-us/library/cc766285(v=WS.10).aspx
Best Regards,
Amy

ADT command line packaging - how to add an ANE?

Hi,
I need to compile an iOS app from the command line.
How to add an ANE to a command line packaging?
This is what I have so far:
./adt -package -target ipa-app-store -storetype pkcs12 -keystore iOS7.p12 -provisioning-profile Foo_DragDrop_iPad.mobileprovision Foo_iPad.ipa Foo_iPad-app.xml Foo_iPad.swf FooIcon29.png FooIcon40.png FooIcon48.png FooIcon50.png FooIcon57.png FooIcon58.png FooIcon72.png FooIcon76.png FooIcon80.png FooIcon100.png FooIcon114.png FooIcon120.png FooIcon128.png FooIcon144.png FooIcon152.png FooIcon512.png FooIcon1024.png Default-Landscape.png
I hope somebody can help me!

Thanks mate!

How to add estimated additional charges to PO lines

Similar Messages

Maybe you are looking for