How to add events into folders without making albums?

All my events created in iPhoto are exactly the way I want to organise my photos, but I hate the fact that I can't organise them into different folders without making an album out of the event. I don't want 'pointers' of photos in the album, I want the original file that I can delete forever as well. I have organised my photos in continents, like Oceania, Europe, South America etc... Into those folders I just want the events of the different countries, so when I click on a continent I can see the event view of those countries and not see all the 4000 photos at once of all the countries in that continent. I also like to go through events the way they are displayed in the event tab, but when the event becomes an album, they are shown differently.
I hope I explained it clearly... Is there a way to put just the events into folders and keep them as events?
On the picture above I want the albums 'Mt Warning', 'Bungyjump' etc, to be become events that contain the original photo files and not just pointers to the original photos. I also want the display of this folder 'Australia 2012 - 2014' to become the same display as when you click on the event tab (so you can see the different events in thumbnails). Is this possible?

And how can I delete photos permanently (in all of iPhoto as well as on my hard drive)?
Deleting Photos from an iPhoto Library
1 - from an Event or the Photos mode: select the photo(s) and use the Delete key to move the photos to the trash bin. Then empty the iPhoto Trash bin as follows:
2 - from an album, smart album, book, slideshow, card, etc.: select the photo(s) and use the key combination of Command+Option+Delete to move the photos to the trash bin.  Then empty the trash bin as above.
NOTE: deleting a photo from an album, slideshow, book, etc., with only the Delete key only deletes that photo from that item. Deleting a photo from an Event deletes ALL occurences of that photo in the library.

Similar Messages

  • How to add TickMark into dropdownlist?

    Hello,
    i am looking for dropdownlist with multiple selection.
    Is there a DropDownList widget allows more than one menu item to be selected at a time?
    i got ans from forum
    http://forums.adobe.com/message/3319311#3319311
    they said we can add tickmark into dropdownlist.so that we can select more than one item.But How to add Tickmark into dropdownlist? OR can we custmize dropdownlist?
    please, give some hint.
    If Anybody knows the solution , please help me.

    I think there are two ways:
    1) Use a specific control with text tokenization, like a Telerik's one  RadAutoCompleteBox (user1's text is a token, and user2's text is an editable
    text area);
    2) Use CSR (client-side rendering; JSLink field of a list EditForm's web part) to make the original field (input tag) read only and dynamically add second text
    box for user2's editable text. Then on form submit you can combine the two values: read only one and dynamically edited. You may do so via overriding the PreSaveAction() JavaScript function in your JSLink file.
    v

  • Add Command to StringItem without making it a hyperlink

    I want to make a screen with a load of StringItems that the user can highlight and I found that I can do this by adding a command to each StringItem (without making it a button). The only problem is, as soon as a Command is added the appearanceMode of the Item is set to HYPERLINK and I can't change it. Does anyone know how I can achieve the same without making it a HYPERLINK. The problem I have with the hyperlink is that it becomes underlined, and I am using spaces to alter the layout, so the empty space also gets underlined.

    As far as I understand, you create StringItem with default appearance mode - using constructor StringItem(label, text).
    In that case, [MIDP 2.1|http://www.jcp.org/en/jsr/detail?id=118] requires device to set hyperlink appearancefor item with command:
    A StringItem that has item commands and the appearance mode Item.PLAIN MUST always be presented as a StringItem with added command(s) and appearance mode Item.HYPERLINK.To avoid hyperlink, I'd try to use "button" appearance mode. This could be done with constructor StringItem(label, text, Item.BUTTON)

  • How to add event to calendar?

    how to add event to calendar?  No plus sign at top of window.

    See the user guide:  http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • How to add images into a java application (not applet)

    Hello,
    I am new in java programming. I would like to know how to add images into a java application (not an applet). If i could get an standard example about how to add a image to a java application, I would apreciated it. Any help will be greatly apreciated.
    Thank you,
    Oscar

    Your' better off looking in the java 2d forum.
    package images;
    import java.awt.*;
    import java.awt.image.*;
    import java.io.FileInputStream;
    import javax.imageio.ImageIO;
    import javax.swing.*;
    /** * LogoImage is a class that is used to load images into the program */
    public class LogoImage extends JPanel {
         private BufferedImage image;
         private int factor = 1; /** Creates a new instance of ImagePanel */
         public LogoImage() {
              this(new Dimension(600, 50));
         public LogoImage(Dimension sz) {
              //setBackground(Color.green);      
              setPreferredSize(sz);
         public void setImage(BufferedImage im) {
              image = im;
              if (im != null) {
                   setPreferredSize(
                        new Dimension(image.getWidth(), image.getHeight()));
              } else {
                   setPreferredSize(new Dimension(200, 200));
         public void setImageSizeFactor(int factor) {
              this.factor = factor;
         public void paintComponent(Graphics g) {
              super.paintComponent(g);
              //paint background 
              Graphics2D g2D = (Graphics2D) g;
              //Draw image at its natural size first. 
              if (image != null) {
                   g2D.drawImage(image, null, 0, 0);
         public static LogoImage createImage(String filename) { /* Stream the logo gif file into an image object */
              LogoImage logoImage = new LogoImage();
              BufferedImage image;
              try {
                   FileInputStream fileInput =
                        new FileInputStream("images/" + filename);
                   image = ImageIO.read(fileInput);
                   logoImage =
                        new LogoImage(
                             new Dimension(image.getWidth(), image.getHeight()));
                   fileInput.close();
                   logoImage.setImage(image);
              } catch (Exception e) {
                   System.err.println(e);
              return logoImage;
         public static void main(String[] args) {
              JFrame jf = new JFrame("testImage");
              Container cp = jf.getContentPane();
              cp.add(LogoImage.createImage("logo.gif"), BorderLayout.CENTER);
              jf.setVisible(true);
              jf.pack();
    }Now you can use this class anywhere in your pgram to add a JPanel

  • When I try to simply add a few photos (from Events) into a newly created Album, it always creates a Folder for the photos to go into. I don't need a Folder.  I just need the photos to go into the Album.  What am I doing wrong?

    When I try to simply add a few photos (from Events) into a newly created Album, it always creates a new Folder - a sub folder to the new Album I just created -  for the photos to go into. I don't need a Folder!  I just need the photos to add into the Album.  What am I doing wrong?

    Sometimes it takes a precise drop to get it into the album.  Make sure you see the album highlighted before releasing the mouse:
    OT

  • I have two ids on my computer and iphone syncing on both how do i merge into one without losing my paid for products or personal photos etc?

    on my computer and iphone syncing on both how do i merge into one without losing my paid for products or personal photos etc?

    This MIGHT help  https://discussions.apple.com/message/16386033#16386033

  • I used Finder to organise my iMovie events into folders. In iMovie I can see the folders but the software says there are no events present. What can i do?

    I used Finder to organise my iMovie events into folders. In iMovie I can see the folders but the software says there are no events in the folders. What can I do to rectify?

    Very carefully use Finder to move the Events back to the top level of the Movies/iMovie Events folder. iMovie will not see them if they are nested in Folders.
    If they are on an external drive, move them to the iMovie Events folder at the top level of the drive.
    However, you can put iMovie projects in folders if you want.
    It is best to do all moves and renames in iMovie so you do not destroy the links in your Projects. However, you need to move your events back to where they were in the Finder sonce iMovie cannot see them.

  • How to organize apps into folders and make them stick in iphone 3gs?

    Four hours down the drain! Darn, I decided to finally learn how to organize my apps into folders and do it right. Instead I spent four hours and must have got it wrong.
    I opened iTunes on my MacBook with my iPhone attached. Then clicked on the iPhone in the left side list of my iTunes. Then clicked on apps which brought up a nice page with all my iPhone apps listed in one window on the left and all the pages of the apps that are on my iPhone in the window on the right. So far this is what I think the User Manual and Help said to do.
    At that point I created new folders by dragging one app over another. For example, I would find a photography app and drag it onto another photography app. That automatically created a folder with the name photography. Just what I wanted. I then looked for more photography apps and dragged them to the folder.
    This is not too easy because I had eight pages of apps. At first, I would grab an app on a page and drag it to where I knew the corresponding folder would be and put it into the folder.
    Later I found another way was to use the list of my apps on the right to put them in apps.
    In the end, from what appeared on the screen, it seemed to me that most of my apps were in folders and the folders were either on page one, two, or three. At that point I thought that I should sync the MacBook with the iPhone, I believe, and did so.
    When the sync was finished I took the iPhone off the computer and looked at it. NONE of the folders I created, nor the organization into folders of the apps were on my iPhone!
    Obviously, I did something wrong since the same mess was on the iPhone as before, with apps all over the place and impossible to locate without taking too much time. This after four hours of work looking at a 13 in. laptop screen!
    What I hope is that someone smarter than me will look at what I did and tell me where I went wrong.
    I want the apps on the iPhone to be organized into logical folders so it is easier to find them. Something along the lines of a good database, you know?
    Thank you for reading to the end of this question,

    OK, I spent another afternoon doing the job started yesterday. Last night (could not sleep, so might as well think) I got to thinking that I really must have missed a step or something because all my work was done on the Mac and I did not recall any time when I transferred the new setup with folders to the iPhone.
    Sure enough, when I tried it today I did find that missing step. When looking at the Home Page of the iPhone or any page being worked on, in the lower right hand corner two buttons say
    SYNC APPLY
    I do not recall using the APPLY button on the first day trying this, but I used it this time.
    After making changes, I hit APPLY and the computer began to sync with the iPhone.
    This time, although there is nothing telling the user what is going on, the sync actually makes the iPhone pages to look exactly like the pages created on the Mac.
    Too bad the instructions and help did not say to do things in this way, which is the only correct way, as far as I can tell.
    I have about 155 apps on the iPhone, making the job extra lengthy. However, I never could do it on the iPhone’s tiny screen, even though it is possible, so this was good - working on the larger screen of the MacBook.
    There are also some (undocumented?) tricks in using the MacBook for this task. For example, it is possible to create a folder and then, using the list of all apps on the iPhone that is on the left side of screen, open the folder, click on the check box next to any app you want to put in the folder and it will jump right in!
    If the check box already has a check mark, just click the box to remove it, click again to put the check mark in the box and voila the app takes off for the folder. This also works to just put apps onto a certain page, if you want to do that, but dragging apps around sometimes works better.
    I hope it will not be necessary to do this again because of the time involved, and he need for quite a bit of thinking on how to move the apps and folders around to get everything just where you want it on the iPhone. The work reminded me of an old kids game that has a small square case with, I guess eleven movable numbers, that are all mixed up, and one space that is not filled with a number. You can move the little squares with the numbers around inside the case to try to line the numbers up in order from 1-11 and do it faster than anybody else.
    Well, unfortunately lining up all my apps was like that because each page of the iPhone only holds 16 folders or apps and each folder is limited to 12 apps. Starting with 155 apps it takes too much mouse maneuvering to make the process easy.
    Finally, the automatic folder names are very broad, as in MUSIC, LIFESTYLE, SPORTS and such, so I often just deleted the given categories and put my in my own. Also, some day I may break down the folders more because twelve apps in one folder means the apps are still pretty much out of view.
    I wrote this in case anyone else finds it and has the same irksome product. If I just reinvented the wheel, please do not tell me now.

  • How to put pictures into folders

    How do I put pics into folders?

    These links may be helpful.
    How To Create Photo Albums http://tinyurl.com/cxm4eoq
    How to Add New Albums in the Photos App on the iPad & Add Photos to the Album
    http://tinyurl.com/7qep7fs
     Cheers, Tom

  • How do we initialize DAL variables without making changes to INI files?

    We have an application which currently use only two DALs. We would like to add a DAL to popluate certain data on the form. We have encountered an issue with initialization of dal vairables.
    One of the solutionis that set FlushDalSymbo = Yes in the FSISYS file.
    However, this involves INI file change which we would like to avoid.
    So, is there a way to initialize dal variables, without making changes to INI files? If so, how?
    Thanks,
    Bala

    Hi Bala,
    Initializing a variable is simple, you just need to set the value to blank or zero:
    Variable = ""
    #Variable =0
    $Variable = 0.00
    You can place the declaration at the beginning of your script, of course replacing "Variable" with the actual name of you variable.
    Gaétan

  • How to group documents into folders

    How do you group documents into folders on iPad Adobe Reader

    You make a folder first, then you move files into the folder.
    Start with the Documents on the left. Click the Edit button (upper right). Click the Add Folder button (folder with + icon). Name the folder.
    Then Click the Edit button, if necessary. Click on the names of files (you'll see checkboxes). Then click the Add to Folder button (arrow into folder icon).

  • How to add data into JTable

    How can I add data into JTable, for instance ("Mike", "Gooler", 21).

    How can I add data into JTable, for instance ("Mike",
    "Gooler", 21).You will have very good results if you segregate out the table model as a seperate user class and provide a method to add a row there. In fact, if you use the table to reflect a database table you can add the row inplace using the existing cursor. I believe it's TableExample2 in the jdk\demo\jfc\TableExamples that has a very good example of this.
    Walt

  • How to add events in JTable fields

    Hello friends i m working with file transfer client server project in my college.In my client part i have used JTable with AbstractTableModel.
    In my JTable it list the current directory files and directories under current directory .
    now how can i add events to the the directories that it shows on JTable so that when i click on directory it displays files under that selected directory.
    can anyone help me in that.
    I will send you my code for that project if anyone can help me.
    please help me to do that

    You can handle row selections with selection listener but if you want to handle double clicks you can use something similar to this:
    table.addMouseListener(new MouseAdapter() {
    public void mouseClicked(MouseEvent e)
    int column = table.columnAtPoint(e.getPoint());
    int row = table.rowAtPoint(e.getPoint());
    Object cellValue = table.getValueAt(row, column); 
    // Insert files below clicked row
    });Please, be more patient in the future -you would probably get an answer if you just posted to any of these two forums.

  • How to add event listener?

    i want to add event listener when i click on a button in mxml, the event listener should be added in the action script file, how to do this?
    can anyone help? urgent!!!

    Hi Lakshmi,
    You can do this just put all the script in the mxml block in seperate AS file as shown below... Observe that I have included an AS file named Script.as and removed the script block form mxml and moved to this Script.as file. Place the Script.as file in your src folder ....
    // Main mxml file....
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="onCreationComplete()">
        <mx:Script source="Script.as"/>
    <mx:TextArea id="textArea" width="300" height="100" />
    <mx:Button id="myButton" label="Click ME"/>
    </mx:Application>
    //Script.as file
    import mx.controls.Alert;
                private function onCreationComplete():void
                 myButton.addEventListener(MouseEvent.CLICK, onButtonClick);
                private function onButtonClick(event:MouseEvent):void
                 Alert.show("Button is Clicked");
    Thanks,
    Bhasker

Maybe you are looking for