How to add extension fields and mashups to partner solution?

To add extension fields and mashups I have log on to the system using a user with adaptation rights.
There's no possibility to do that from within the UI designer, right?
Now, if I adapt the screens with extension fields or by creating and adding mashups, how do I add these enhancements to my partner solution?
Or in other words, how do I ship extension fields and mashups with my partner solution?

Before you use the key user tools, you must "enable key user tools" in copernicus by right click on the solution. Now the changes will be added to the partner soltution transport order.
But you can add extension field in copernicus as well by adding new item "business object extension" to the partner solution.

Similar Messages

How to add a field and table control to BP transaction.

Hi,
I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
Can some on please help me if having a solution and with any relavant documents.
Thanks in advance.
Raj & Khader.

Also explore with EEWB tcode.
Refer this threads
Re: EEWB
Created New fields in Business Activity with EEWB
Cheers
Manohar

How to add a field to the selection screen and when the user enters ...

hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.

Hi Kripa,
   If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
            q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
           c_no(10) TYPE c DEFAULT '9D0161',
           u_id(15) TYPE c,
           password(15) TYPE c,
           r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh.

How to ADD reference table and make a field as currency field in dictionary

pls render some info on how to add refernce table and ref field if i want to make an added field as a currency or quantity field...

Hi Kiran,
It sounds like you are creating a "Z" table or structure and have defined a quantity (eg MENGE). But when you run the syntax check, the system is saying you need to define a reference table / field.
Well when you are in SE11, click on the "Currency / Quantity Fields" tab. You will see 2 columns called "Reference Table" and "Reference Field". These 2 columns define the unit of measure for the currency / qty.
If you have defined in your table MENGE and MEINS and the MEINS field is the unit of measure for the MENGE field you should define your fields as such (inthe Currency/Quantity Fields" tab:
Table - ZVBAP
MENGE MENGE_D QUAN ZVBAP MEINS
MEINS MEINS UNIT
Hope this makes sense.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to Add parameter fields in BI publisher fields

Hi,
I'm creating xml report for Apps standard Trial Balance Summary, here i cant able to run the .rdf locally due to SRW.UserExit .
So i got the XML file from output of the report.
Then i added the xml data in BI publisher and then i have created the .rtf for that.
Here i need to add some fields which is not available in fields list (in BI Publisher).
How to add that fields, or is possible to add fields manually.
That fields are given as parameters while running the .rdf file.
Please tell me how to solve this problem.
Is possible to add fields manually means tell me how to do that.

If those fields are input parameters to the concurrent program then you can display them in RTF by declaring and printing it as
<?param@begin:P_CONC_PARAM?>
and display it as <?$P_CONC_PARAM?> - Note P_CONC_PARAM should match your parameter token

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

REG: How to add new fields to existing Infospoke

Hi All,
We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
But here is the scenario....
I need some extra fields that are available in other ODS. How to add that fields ?
By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
Note: already BAdi is active in the infospoke.
Please help me in this regard

Hi Chase,
As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
DATA: it_data type standard table of 'DSO Name'.
select Key1 key2 etc...
          Field1 Field2 Field3 Field4
          from DSO
          into table it_data
          for all entries of infospoke
         where key1 = infospoke1-key1
                     key2 = infospoke2-key2.
This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
Regards,
Durgesh.

11.5.9/OAF 5.7 : how to add new fields in iProc "search results" page

We need to add new fields into iProc "search results" page - "Personalize Self-Service Defn" is et, we can enter the personalization screens (from both the "master" link at top/right page level or from the link above the region) - anyway cannot find how to add new fields. Do we have to go to AK developer and/or XML files or is it feasable from OAF (as it is with 11510) ? TIA.

It depends on what fields you want to add.
1. If Oracle has included the fields, just render them via personalizations
2. If they are brand new fields:
a) you will need to extend the VO (I do not know the exact name).
b) change the query to get your extra db columns if necesary
c) add transient attributes to the VO and map them to b).
d) Then you need to add the items via personalization and map them to the attributes you created in c)
Check on metalink for the lates version of OAF Dev Guide and Personalization guide.
Thanks
Sandeep

Query: How to add new fields in ABAP query?

Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?

What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new fields in Web UI where AET is not applicable

Hi,
We tried to add new fields using AET, but surprisingly 'Create Field' is in disabled mode in AET Configuration.
We are trying to add custom fields to the view GSTEXT/notes. But we could not do that.
what are the other possible ways to add custom fields and the required configuration for that.
Your help and suggestions will be highly appreciated.
Best regards,
Venkat

Hi,
Thanks for the response, We want to add two custom fields in Component / View (Gstext / Note).
We are trying with AET tool, But in AET tool configuration window, ''Create Field'' is in not in active mode (disabled mode), we can see it but it is not clickable.
In order to proceed and create new fields it has to be in enabled.
Kindly suggest me how to activate this field. your suggestions will be highly apprecaited.
Thank you
Venkat

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

How to add extension fields and mashups to partner solution?

Similar Messages

Maybe you are looking for