How to add fields in a z table
hi experts !
i have to add a new fields to an already existing Z table. how can i add field? do i have to delete all other entries and create new ones so that the entry in the new field also gets created.?
akanksha
Hi,
You have two options to enter data type while creating new field in table.
1. User standard data types i.e. mandt, kunnr etc..to use it u need to press "Predefined type" button present on top of table fields.
2. User custom data elements...this data elements you creates when you want to have data field specified to your required length.
Hope this will help.
Sumit
Similar Messages
-
How to add field value to the standard table
Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod. -
Hi,How to add field to sap Liquidity calculation module tables?
Hi Experts,
How to add field to sap Liquidity calculation module tables?
and how to add a field to a particular transaction code using a customer exits.
please tell me in detail.
thanks inadvance,
Regards,
RekhaHi Pranab,
Please follow the below steps to create an extra field and write code for that field through Infoset.
1-->Change in Infoset
u2022Go to SQ02 , enter Infoset name and click on Change Button
u2022Go to Extras (F5) button displayed on application bar.
u2022In Extras tab, click on 'Create' icon to create additional field E_NAME1, give as type C (character) and give desired length and. Enter header description as 'ShipToName'
u2022Select this field i.e E_NAME1 in one of the field group of Infoset.
u2022Go to Code section (Shift+F8) of infoset, Select Record Processing Event and write your logic code (condition) in this code section:
if vbpa-adrnr = space.
E_NAME1 = kna1-name1.
else.
E_NAME1 = adrc-name1.
endif.
2-->Generate the Infoset.
3-->Change in Query
u2022Go to SQ01(in a new session), give your query name (by selecting your user group) and click on change button.
u2022Check the field group in which you have added E_NAME1 field, then check E_NAME1 from Fields screen
u2022Click on 'Basic List' button; give line (row no.) and sequence (column no.) for extra fields.
u2022Execute/Test the Query, you will get desired result.
Please let me know, if you need more information.
Regards,
Dinesh
Edited by: Dinesh Tiwari on Oct 29, 2009 7:13 AM -
How to ADD field in iview ?
hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, MartinGopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin -
Reg:How to add fields to the scripts in detail
How to add fields to the scripts in detail.
Plz give me one example help me out.Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
LIFNR TYPE LFA1-LIFNR,
NAME1 TYPE LFA1-NAME1,
LAND1 TYPE LFA1-LAND1,
ORT01 TYPE ORT01,
REGIO TYPE REGIO,
END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
EBELN TYPE EKKO-EBELN,
BUKRS TYPE EKKO-BUKRS,
AEDAT TYPE EKKO-AEDAT,
ERNAM TYPE EKKO-ERNAM,
BSTYP TYPE EKKO-BSTYP,
LIFNR TYPE EKKO-LIFNR,
END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
LOEKZ TYPE EKPO-LOEKZ,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
NETWR TYPE EKPO-NETWR,
END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
WA_EKKO TYPE ST_EKKO,
IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
WA_EKPO TYPE ST_EKPO,
IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
TOTAL = TOTAL + WA_EKPO-NETWR.
CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'PRINTER'
FORM = 'Z_50886_VENDOR'
LANGUAGE = SY-LANGU
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'HEAD'
WINDOW = 'HEADER'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'VENDOR'
WINDOW = 'ADDRESS'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
WINDOW = 'TOTAL'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
BUKRS
AEDAT
ERNAM
BSTYP
LIFNR
FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM. " get_data_from_ekko
*& Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
SELECT LIFNR
NAME1
LAND1
ORT01
REGIO
FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM. " get_data_from_lfa1
*& Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
SELECT EBELN
EBELP
LOEKZ
AEDAT
MATNR
NETWR
FROM EKPO INTO TABLE IT_EKPO
WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM. " get_data_from_ekpo -
How to add fields to already loaded cube or dso and how to fill records in
how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?
This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382 -
How to dynamic field insert into intenal table?
hi friends
this is my urgent requirements .... how to dynamic field insert into internal table if it possible please tell me
thanks & regards
pauldharmaHi,
Go through this
REPORT yusmm_text1 NO STANDARD PAGE HEADING
LINE-SIZE 199.
T A B L E S
TABLES: MARA,
MAKT,
THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
SPRAS TYPE MAKT-SPRAS,
LTXT(2000) TYPE C ,
SRNO TYPE N ,
END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
SPRAS TYPE T002-SPRAS,
LAISO TYPE T002-LAISO,
SRNO TYPE N ,
END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
SPRAS TYPE MAKT-SPRAS,
MAKTX TYPE MAKT-MAKTX,
END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
matnr TYPE mara-matnr,
END OF tp_matnr.
GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
gv_lit TYPE I,
gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
gv_li1(3) TYPE N,
g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
GLOBAL STRUCTURES
DATA: T_NEWTABLE TYPE REF TO DATA,
T_NEWLINE TYPE REF TO DATA,
T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
T_FLDCAT TYPE LVC_T_FCAT,
WA_IT_FLDCAT TYPE LVC_S_FCAT,
WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
WA_COLNO(2) TYPE N,
WA_FLNAME(5) TYPE C,
L_LT TYPE SLIS_LAYOUT_ALV.
GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
"tablename
<FS_DYNTABLE>, "Field symbol to create work area
<FS_FLDVAL> TYPE ANY. " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
<FS_DATA1> TYPE REF TO DATA,
<FS_2> TYPE STANDARD TABLE,
<FS_22> TYPE STANDARD TABLE,
<FS_1>,
<FS_11>,
<F>,
<FA>,
<LWA_LINE_WA>,
<LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA TYPE REF TO DATA,
LT_DATA1 TYPE REF TO DATA,
LWA_LINE TYPE REF TO DATA,
LWA_LINE1 TYPE REF TO DATA,
LI_FIELD_CAT TYPE LVC_T_FCAT,
LWA_FIELD_CAT TYPE LVC_S_FCAT.
PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
OBLIGATORY ,
S_MATNR FOR MARA-MATNR,
S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
MESSAGE W130(26) WITH TEXT-004.
SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Material Number'.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Authorization Group'.
g_VAR11 = wg_final-srno + 2.
gv_li1 = gv_li1 + 2.
MOVE : g_var11 TO gv_i1.
ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'MatDesc'.
g_var2 = g_var11 + gv_lines.
ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'BasicData'.
APPEND <LWA_LINE_WA1> TO <FS_22>.
EXIT.
ENDLOOP.
LOOP AT ig_final INTO wg_final.
AT NEW matnr.
gv_index = sy-tabix.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-matnr.
ENDAT.
AT NEW MATNR.
GV_INDEX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-matnr.
ENDAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-begru.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-begru.
gv_var = wg_final-srno + 2.
gv_li = gv_li + 2.
MOVE : gv_var TO gv_i.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-maktx.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-maktx.
gv_var1 = gv_var + gv_lines .
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-ltxt.
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-ltxt.
AT END OF matnr.
APPEND <LWA_LINE_WA> TO <FS_2>.
CLEAR <LWA_LINE_WA>.
ENDAT.
AT END OF matnr.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
ENDAT.
ENDLOOP.
PERFORM display..
*& Form data_fetch
text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT matnr
from mara up to gp_size rows
appending corresponding fields of table ig_matnr
where matnr in s_matnr
and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
MARA~BEGRU
MARA~MTART
MAKT~SPRAS
MAKT~MAKTX FROM MARA INNER JOIN MAKT
ON MARAMATNR = MAKTMATNR
appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
WHERE makt~spras IN s_spras
AND mara~matnr IN s_matnr
AND mara~mtart IN s_mtart
AND mara~matnr EQ ig_matnr-matnr.
endloop.
IF sy-subrc = 0.
SORT ig_mara_makt.
ENDIF.
ENDFORM. " data_fetch
*& Form read_data_to_final
text
--> p1 text
<-- p2 text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
wg_final-MATNR = wg_mara_makt-MATNR.
wg_final-BEGRU = wg_mara_makt-BEGRU.
wg_final-MTART = wg_mara_makt-MTART.
wg_final-SPRAS = wg_mara_makt-SPRAS.
wg_final-MAKTX = wg_mara_makt-MAKTX.
READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
IF sy-subrc = 0.
wg_final-srno = wg_t002-srno.
ENDIF.
CLEAR ig_thead[].
ig_thead-TDOBJECT = 'MATERIAL'.
ig_thead-TDNAME = wg_final-matnr.
ig_thead-TDID = 'GRUN'.
ig_thead-TDSPRAS = wg_final-spras.
CALL FUNCTION 'TEXT_READ'
EXPORTING
I_HEADER = IG_THEAD
I_READONLY = 'X'
IMPORTING
E_HEADER = IG_THEAD
TABLES
T_LINES = IG_TLINE[]
EXCEPTIONS
NOTFOUND = 1.
IF sy-subrc EQ 0.
LOOP AT ig_tline.
gv_strg = ig_tline-tdline.
IF gv_strg1 <> ' '.
CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
ELSE.
gv_strg1 = gv_strg.
ENDIF.
ENDLOOP.
wg_final-ltxt = gv_strg1.
APPEND wg_final TO ig_final.
CLEAR wg_final.
gv_strg1 = ' '.
ELSE.
APPEND wg_final TO ig_final.
ENDIF.
ENDLOOP.
ENDFORM. " read_data_to_final
" read_data_to_final
*& Form layout
text
--> p1 text
<-- p2 text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM. " layout
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
SELECT SPRAS
LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
g_v = g_v + 1.
Wg_t002-srno = g_v.
MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'MD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'BD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA> " Dynamic Internal Table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA1> " Dynamic Internal table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM. " fieldcat
*& Form show
text
--> p1 text
<-- p2 text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = GV_REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = L_LT
IT_FIELDCAT = T_FLDCAT1[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = <FS_2>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
WHEN 'DOWNLOAD'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
TEXT_QUESTION = 'Data download to excel'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IMPORTING
ANSWER =
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = 'C:\Material-Text.xls'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X'
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = 'X'
IMPORTING
FILELENGTH = GL_LENGHT
TABLES
DATA_TAB = <FS_22>
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF GL_LENGHT NE 0.
MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
ENDIF.
Thanks
ENDCASE.
ENDFORM. "user_command -
HOW TO ADD FIELDS OF BSEG-ZFBDT & BSEG-ZBD1T
hi frnds.
currently iam working on SD MODULE I NEED the NET DUE DATE SO HOW TO DO THAT
1 problem plz:
HOW TO ADD FIELDS OF BSEG-ZFBDT & BSEG-ZBD1T
TOGETHER
one is date & other is numeric value so how?
one is date & other is numeric value so how to add this 2 fields
& finally i want to display the o/p in date format dd/mm/year
THANKS IN ADVANCE.Hi Mahesh,
one of the nice features of ABAP is that it takes care about month/year changes when adding days/month on a date.
ADD lv_zbd1t TO lv_zfbdt.
This should work fine. If not, try to convert zbd1t into an integer first.
To get you preferred date output format try this:
DATA: lv_datestring TYPE string.
CONCATENATE lv_zfbdt+6(2) '/' lv_zfbdt+4(2) '/' lv_zfbdt(4)
INTO lv_datestring.
This isn't tested, but should give you a clue.
Regards,
ok -
How to set field alignment in a table in jdev 11.1.2.3?
hi,
How to set field alignment in a table in jdev 11.1.2.3?
eg: to diplay a number field in a table as right aligned.
I have tried to set field(amount) VO UI Hint Format Type:Number; Format: 0000.00
and jspx as flowing, but it doesnot work.
Thanks.
bao
<af:column sortProperty="#{bindings.VO1.hints.Amount.name}"
sortable="true"
headerText="#{bindings.VO1.hints.Amount.label}"
id="c44" width="60"
align="center">
<af:inputText value="#{row.bindings.Amount.inputValue}"
label="#{bindings.VO1.hints.Amount.label}"
required="#{bindings.VO1.hints.Amount.mandatory}"
columns="#{bindings.VO1.hints.Amount.displayWidth}"
maximumLength="#{bindings.VO1.hints.Amount.precision}"
shortDesc="#{bindings.VO1.hints.Amount.tooltip}"
id="it58"
secret="false"
inlineStyle="text-decoration:overline;">
<f:validator binding="#{row.bindings.Amount.validator}"/>
</af:inputText>
</af:column>Works for me:
<af:column sortProperty="#{bindings.EmployeesView1.hints.Salary.name}" sortable="false"
headerText="#{bindings.EmployeesView1.hints.Salary.label}" id="c7" align="right">
<af:inputText value="#{row.bindings.Salary.inputValue}" label="#{bindings.EmployeesView1.hints.Salary.label}"
required="#{bindings.EmployeesView1.hints.Salary.mandatory}"
columns="#{bindings.EmployeesView1.hints.Salary.displayWidth}"
maximumLength="#{bindings.EmployeesView1.hints.Salary.precision}"
shortDesc="#{bindings.EmployeesView1.hints.Salary.tooltip}" id="it6">
<f:validator binding="#{row.bindings.Salary.validator}"/>
</af:inputText>
</af:column>JDeveloper 11.1.2.3
Salary is shown right-aligned.
What happens if you get rid of your inlineStyle on the af:inputText -
How to join fields from different internal tables and display into one int
hai i have one doubt...
how to join fields from different internal tables and display into one internal table..
if anybody know the ans for this qus tell me......hii
you can read data as per condition and then can join in one internal table using READ and APPEND statement..refer to following code.
SELECT bwkey " Valuation Area
bukrs " Company Code
FROM t001k
INTO TABLE i_t001k
WHERE bukrs IN s_bukrs.
IF sy-subrc EQ 0.
SELECT bwkey " Valuation Area
werks " Plant
FROM t001w
INTO TABLE i_t001w
FOR ALL ENTRIES IN i_t001k
WHERE bwkey = i_t001k-bwkey
AND werks IN s_werks.
IF sy-subrc EQ 0.
LOOP AT i_output INTO wa_output.
READ TABLE i_t001w INTO wa_t001w WITH KEY werks = wa_output-werks.
READ TABLE i_t001k INTO wa_t001k WITH KEY bwkey = wa_t001w-bwkey.
wa_output-bukrs = wa_t001k-bukrs.
MODIFY i_output FROM wa_output.
CLEAR wa_output.
ENDLOOP. " LOOP AT i_output
ENDIF. " IF sy-subrc EQ 0
regards
twinkal -
Hi Experts,
In my requirement I 've to add two custom fields in ME21N Transaction at header level in customer tab.
I 've added two fields say F1 and F2 using Screen exit..
Now I need to add condition based on F2 in ZXMEWU08... But there is no field F2 in the POHEADER.
How to add that field? Please help me .
Thanks in advance.
Regards,
Saran.Hi Saran,
You can do that with the MM06E005 enhancement in the CMOD transaction. First you have to
configure the CI_EKKODB append structure in the EKKO database table. In the CI_EKKODB structure you have to define your Z fields.
The EXITs that you need are:
EXIT_SAPMM06E_006 --> PBO
EXIT_SAPMM06E_008 --> PAI
DYNPRO 101 --> Where you'll insert your new Z field.
Best Regards -
How to add fields in subcreen in MM01 in purchasing viewu0092
HI experts,
How to add some fileds ie check boxes in the MM01 transcation wht is the procedure to add the fields and how to give the functionality to tht checkbox.
The added screen will be appearing in the view purchasing only for the conditions WERT materials. example.Hi,
Try Screen Exit................
Cut and paste the below code in se38 and type the Tcode you will find the Exit and refer table MODSAP
TCODES SMOD, CMOD.
*& Report ZVBUSEREXIT *
REPORT ZVBUSEREXIT .
TABLES : TSTC, "SAP Transaction Codes
TADIR, "Directory of Repository Objects
MODSAPT, "SAP Enhancements - Short Texts
MODACT, "Modifications
TRDIR, "System table TRDIR
TFDIR, "Function Module
ENLFDIR, "Additional Attributes for Function Modules
TSTCT. "Transaction Code Texts
*& Variables
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK A01 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK A01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
* Find Repository Objects for transaction code
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME = ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
* Find SAP Modifactions
SELECT * FROM TADIR INTO TABLE JTAB WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
V.Balaji
Reward if Usefull... -
How to add fields in smartform
Hi,
I would like to add some fields in standard smartform for outbound delivery ( VL03N ). Actually, I formatted smartform accourding to clent requirement. But I am not getting how to add some fields in that. Please, help me with any example.
Thanks ...Hi Manoj,
it depends: If the values for new fields are passed in any interface structures/tables, just add in the eight context.
If not, you must insert a Program lines node.
This tutorial may be helpful as your smartforms experience may be limited:
[SAP Smart Forms (BC-SRV-SCR)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
Regards,
Clemens -
How to add fields in fp03 Extenal Collection agency screen
Hi All,
As per our requirement, I need to add a check box and a date field in FP03 transaction - Extenal collection agency screen. I couldn't find any screen exit,BADI. Any one know how to add these two fields on the screen and save the values in DFKKCOLL and DFKKCOLLH table.
Your answer is highly appreciated.Hello,
I do not know the either user exit or BAdi for FP03. However I can suggest you a work around.
You can add an addl tabstrip in FPE2/FPE2M. This is possible by adding an addl field say 'ZZ' in tables DFKKOP/DFKKCOLL/DFKKCOLLH.
<also pls look into OSS Note 851023>
So when ever an item is submitted to collection agency, this field should be updated.
Hope this helps
Rgds
Rajendra -
How to add fields in z of standard program me5j
Hi Experts,
i have to add new field in zprogram of standard alv in ME5J.
its out put structure is MEREP_OUTTAB_EBANACC
but not getting the method that how to add new feild in that structure, as my values are comming in stab_aban internal table.
please help me to get out of this as soon as possible.
waiting for the reply
Thanks and Regards
Neha
Edited by: neha1.gpta on Jun 8, 2010 1:14 PMHi
Use the function module REUSE_ALV_FIELDCATALOG_MERGE
Then use the structure MEREP_OUTTAB_EBANACC to create the field catalogue
Now call the REUSE_ALV_GRID_DISPLAY with your internal table it would work.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
I_INTERNAL_TABNAME =
i_structure_name = 'MEREP_OUTTAB_EBANACC '
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
LOOP AT it_fieldcat INTO wa_fieldcat
WHERE fieldname = 'CONTRACT' OR
fieldname = 'ZUPDCIND' .
IF wa_fieldcat-fieldname = 'CONTRACT'.
wa_fieldcat-hotspot = c_x.
MODIFY it_fieldcat FROM wa_fieldcat.
ELSEIF wa_fieldcat-fieldname = 'ZUPDCIND'.
DELETE it_fieldcat INDEX sy-tabix.
MODIFY it_fieldcat FROM wa_fieldcat.
ENDIF.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = gs_layout
it_fieldcat = it_fieldcat
TABLES
t_outtab = it_output1
Edited by: mukesh mahajan on Jun 8, 2010 1:38 PM
Maybe you are looking for
-
Java application problem in my 6021
Dear. I read from user guide for 6021, that this mobile is enabled with java technologyu. but when i try to get Java application from bluetooth, it says as invalid file format. what is the remedy for this issue? shall i update my mobile software? Whe
-
ITunes 7, software 1.2 videos gone from iPod
I recently updated to iTunes 7 so that i would be able to purchase and download a show from the music store. After my iPod was finished updating with the new software all of my shows were gone from my iPod except for the one i just bought. They are s
-
JCO Timeout for SAP Business Connector 4.7
Environment : Windows 2000, SAP Business Connector (BC) 4.7 General Description : SAP BC is used to invoke BAPI's in the SAP R/3 system. Issue : Some BAPI's are taking some time to return response depending on user load. Need to provide a timeo
-
I have a keynote presentation that i built a while ago. How do i now identify the file names of the video files that are in the presentation?
-
Hi to all, while running this program,I am getting NullPointer exception and i have the records in login table.I am new to java.Please tell me the solution.Thanks public class displayserv extends HttpServlet public void doGet(HttpServletRequest