How to Add fields in dynamic selection LDB BRF

Hi All,
I have requirement to add a field BSEG-ZLSCH in Logical Database BRF dynamic selection.
I have tried doing the same by using below mentioned link but its not appearing in the report dynamic selection screen
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?quicklink=index&overridelayout=true
Could you please help me a Legal change delivery is pending due to this issue.
Thanks and best regards,
Niteesh Rai

Dear Niteesh,
The Logical Data Base BRF reads table BKPF and BSEG, but there is no
option to include fields from BSEG in the dynamic selection.
You can display all the tables included in BRF, but only fields from
BKPF could be included in the dynamic selection. You cannot add
entries from BSEG, BSET, KNB1, KNBK, and so on that are listed here.
You are right, there is not note that explains this behaviour, but I
inform you what is the system design. This has been confirmed by my
Development colleagues.
Regarding to note 832997, this is valid for releases 500 and 600 when
New G/L is available. The system functionality has been enhanced in
release 500 so you can add fields from FAGLFREESEL that is similar
to BSEG with New G/L.
BR, Hana

Similar Messages

Add field in dynamic selections to ME2A, to create aselection view in LDB

Hi all,
I would like to include in the search selection of ME2A the field 'Relevant for agency business', but this field doesn´t appear at the purchasing document . I´ve been reading that by the Logical database builder it is possible to do this, but I don´t manage how.
I've been trying (with transaction SE36) to copy from Source view - SAP to Target view - CUS for some logical database (for example LDB - ELM) and I havn't been success. I received Error "The selection view does not exist"
Which LDB should I choose? How to create a selection view STANDARD SAP ?
Thanks in advance
All Regards

Dear Weiyang
kindly note that as per SAP note 310886 Only certain tables or fields are permitted
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
no other table is allowed
so your field BKPF-CPUDT is not allowed in dynamic selection
Hope your query is solved
Cheers
IMK

Add field in dynamic selections in me2n

Hi all,
I would like to include in the search selection of me2n the field Order of the account assignement, but this field doesn´t appear at the purchasing document item possibilities. I´ve been reading that by the Logical database builder it is possible to do this, but I don´t manage how. Which LDB should I choose?, and then I create a selection view and the fields groups but when I go to me2n nothing happens, any idea?
Thanks in advance
Regards

Dear Weiyang
kindly note that as per SAP note 310886 Only certain tables or fields are permitted
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
no other table is allowed
so your field BKPF-CPUDT is not allowed in dynamic selection
Hope your query is solved
Cheers
IMK

Add field in dynamic selections of FBL3N

Hi,
I know this question has been post before and i have followed the sap note 188663 and 832997, and also I read it in the wiki tab, "Enhancing Selection Views in the dynamic selection of FB03, FBL3n, FBL5n and etc".
But no available for me.
Requirement: Accounting document entry date(BKPF-CPUDT) need to be added in the dynamic selection in FBL3N.
I did the following customizations, but it doesn't work.
1.Execute Transaction code SE36. Enter "SDF" in Logical database field.
2.From the initial screen of SE36, Choose from the path EXTRAS>> Selection Views
3.Change the selection views "CUS".
4.double click table BKPF, and enter "02" in function group of Accounting document entry date(BKPF-CPUDT).
But, when I execute FBL3N, the custmized filed was not displaying in dynamic selection.
And then, I found there is no BKPF table in dynamic selections setting in front screen of SE36. ( Menu path : Extras >>Dynamic selections ).
So, I modified the Selections of Subobjects as belows.
"SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE BKPF."
When I use a test run(F8) in SE36, I could get the additional field in the dynamic selection.
However, I still could not get it in executing FBL3N.
I see that there is a Edit -> generate -> selections and program in front screen of SE36, and when I selected, the message was displayed as "The slections for LDB SDF cannot be generated (already exist)".
Please assist me.
Thanks in advance.
Weiyang

Dear Weiyang
kindly note that as per SAP note 310886 Only certain tables or fields are permitted
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
no other table is allowed
so your field BKPF-CPUDT is not allowed in dynamic selection
Hope your query is solved
Cheers
IMK

How to Add field to Selection screen of Tx. FBL5N

Hi All,
In Tx. FBL5N, there is a field Customer number (on Customer selection screen).
In addition to the above we need to add field Customer name in Selection screen.
How do we go about it ?
PS :- We have found steps to add fields to FBL5N output. But, we dont want it on output, we want to add it on Selection screen.
Regards,
Ashish

Hi,
Only certain table fields are allowed in dynamic selection, please see this sap note for detail :
Sap Note 310886 - Line items: Dynamic selections ignored
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
So BKPF-CPUDT field is not allowed for dynamic selection.
check this thread Add new Fields to Dynamic Selection FBL5n
Or
Enhancing Selection Views in the dynamic selection of some SAP transactions like FB03, FBL3N, FBL5N
This enhancing related to SAP OSS Note: 188663 and 832997
Requirement: The business requires the Doc. Header Text be added in the dynamic selection in SAP transactions FB03
■Execute Transaction code SE36. Click F4. Enter the SAP table name wherein you think the field could be found. In this case the SAP table is BKPF and the logical database is BRF
■From the initial screen of SE36, Choose from the path EXTRAS >> Selection Views
■Copy Selection View u201CSAPu201D to u201CCUSu201D
■Change the selection views u201CCUSu201D
■In the right corner, double click your table BKPF.
■In the right corner, check whether what functional groups does your field belong. If it is 01 then input it beside your field name.
■Then Save it afterwards.
Prabhudas

Add certain field at dynamic selection screen in FBL3N transaction

Hello Expert,
I would like to add entry date field (BKPF-CPUDT) at dynamic selection screen in FBL3N transaction.
So, I went to SE36 transaction and changed something in selection view for SDF.
However, it didn't work.
Is there anyone who knows how to add a certain field at dynamic selection screen in FBL3N transaction?
Thanks in advance.
BR,
Chris Kim

Hi
Refer to the following thread
Additional field selections in FB03
It talks about adding Header Text field
You should be able to add entry date similarly
Regards
Sach!n

How to change the text of a user defined field in dynamic selections?

Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
Ven

Madhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks,

'Plant Location' field in dynamic selection of report

Hi Experts,
I have entered some value in plant location in WBS org. data tab and want to filter the report by giving this field in dynamic selection of reports. But this field is not availble in dynamic selection. how we can add the same, even this is standard field in PRPS table (PRPS-STORT). Pls help.
Regards
Dinesh Chauhan

In standard SAP this field is not set for dynamic selection
you can create your customer view with STORT activated or you can change the STD view
SE36
enter PSJ as logical database
go to menu path (in that same screen)
Extras -> selection views
this will default to CUS (short for CUS view)
change this to SAP and change button
In the table node section scroll down till you come to table PRPS_R then double click on that
in the table field section below enter B2 next to the stort field (you may to scroll) - this means that this will now be visible in the org unit section for WBS in dyn selection
save etc and then re try

Report Profile Use & fields in dynamic selection in RE-FX reports..

I have two requirements:
1. Some of the SAP delivered fields in RE master data of BE,PR,BU and RO are not required by our client. Thus we have hidden them using field status transaction. However they are still available in RE info system in Dynamic selection as well as in output screen. How can we remove these fields from information system as well.
2. Some fields were added to the master data using BDT, they are visisble in the report however, they are not available in Dynamic Selections. How can we add them in dynamic selection as well during report execution.
The transaction codes for reports are e.g. REISBE, REISBU, REISPR, REISRO, RECN, etc.
Can ReportProfile be of some use?? If yes, how can we configure the same.
Regards
Rohit

I am aware of this, however, creating a variant still keeps the fields in hidden list in change variant section and any user maygo and bring the same to viewable list.
I am willing if we can simply remove those fields from the display screen to avoid any confusion in future.
Regards
Rohit

How to ADD field in iview ?

hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, Martin

Gopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin

How to Add Push Button On Selection Screen

Hi Experts,
How to add Push button on Selection Screen.
Points will b rewarded for useful help.
Bohra.

Hi,
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREENevent.
Ex.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CLI1'.
FLAG = '1'.
WHEN 'CLI2'.
FLAG = '2'.
WHEN 'CLI3'.
FLAG = '3'.
WHEN 'CLI4'.
FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a
dialog box. The selection screen is defined in a statement chain for keyword
SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4',
the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
Regards,
Bhaskar

Include new field in dynamic selection in fbl1n

Hi Guys,
I want to add a new field in dynamic selection in tcode FBL1N.
Regards,
H.Sathiskumar

Hi Sathiskumar,
Here are general instructions for adding new fields to the dynamic selection:
1) Call Transaction SE36
2) Enter logical database DDF, KDF or SDF (for FBL5N, FBL1N, FLB3N)
3) Menu -> Extras -> selection views
4) Here you can find 2 origins of the view (SAP and CUS).
   The standard view SAP is used. Create your own using view CUS. First copy the view SAP.
   On the left side are the functional groups.
   01 Customer master => fields from table KNA1
   02 Company code     => fields from table KNB1
   03 Documents        => fields from table BSID
Only those fields from these tables can be used for dynamic selection
5) To get another field from e.g. table KNB1 for the dynamic    selection double click on the right side on
    table KNB1. The field in the lower area will be changed. Search for the desired field and enter a 03
    in front of the field. Save.
6) Test in your report.
Note: Not every table and field can be used as dynamic selection. It is also necessary that the report
           allows selection for that field."
Furthermore I suggest You to have a look at the note number 310886 that can be useful.
Customers: logical database: DDF
Permitted tables:
KNA1, KNB1: All fields are permitted that are contained in the VF_DEBI view. If necessary, you have to
                     include additional fields in the view fields category using Transaction SE11.
I hope this information may help you in resolving the reported issue.
Regards,
Emoke

How to add field value to the standard table

Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod.

Reg:How to add fields to the scripts in detail

How to add fields to the scripts in detail.
Plz give me one example help me out.

Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
      LIFNR TYPE LFA1-LIFNR,
      NAME1 TYPE LFA1-NAME1,
      LAND1 TYPE LFA1-LAND1,
      ORT01 TYPE ORT01,
      REGIO TYPE REGIO,
      END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
      EBELN TYPE EKKO-EBELN,
      BUKRS TYPE EKKO-BUKRS,
      AEDAT TYPE EKKO-AEDAT,
      ERNAM TYPE EKKO-ERNAM,
      BSTYP TYPE EKKO-BSTYP,
      LIFNR TYPE EKKO-LIFNR,
      END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
      EBELN TYPE EKPO-EBELN,
      EBELP TYPE EKPO-EBELP,
      LOEKZ TYPE EKPO-LOEKZ,
      AEDAT TYPE EKPO-AEDAT,
      MATNR TYPE EKPO-MATNR,
      NETWR TYPE EKPO-NETWR,
      END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
     IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
     WA_EKKO TYPE ST_EKKO,
     IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
     WA_EKPO TYPE ST_EKPO,
     IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
      V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
    TOTAL = TOTAL + WA_EKPO-NETWR.
    CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
   EXPORTING
    DEVICE                            = 'PRINTER'
    FORM                              = 'Z_50886_VENDOR'
    LANGUAGE                          = SY-LANGU
   EXCEPTIONS
     CANCELED                          = 1
     DEVICE                            = 2
     FORM                              = 3
     OPTIONS                           = 4
     UNCLOSED                          = 5
     MAIL_OPTIONS                      = 6
     ARCHIVE_ERROR                     = 7
     INVALID_FAX_NUMBER                = 8
     MORE_PARAMS_NEEDED_IN_BATCH       = 9
     SPOOL_ERROR                       = 10
     CODEPAGE                          = 11
     OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'HEAD'
     WINDOW                         = 'HEADER'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
    CALL FUNCTION 'WRITE_FORM'
     EXPORTING
       ELEMENT                        = 'ITEM'
       WINDOW                         = 'MAIN'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'VENDOR'
     WINDOW                         = 'ADDRESS'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    WINDOW                         = 'TOTAL'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
   EXCEPTIONS
     UNOPENED                       = 1
     BAD_PAGEFORMAT_FOR_PRINT       = 2
     SEND_ERROR                     = 3
     SPOOL_ERROR                    = 4
     CODEPAGE                       = 5
     OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
         BUKRS
         AEDAT
         ERNAM
         BSTYP
         LIFNR
      FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM.                    " get_data_from_ekko
*&      Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT LIFNR
           NAME1
           LAND1
           ORT01
           REGIO
           FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
                LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM.                    " get_data_from_lfa1
*&      Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT EBELN
           EBELP
           LOEKZ
           AEDAT
           MATNR
           NETWR
           FROM EKPO INTO TABLE IT_EKPO
           WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM.                    " get_data_from_ekpo

Hi,How to add field to sap Liquidity calculation module tables?

Hi Experts,
How to add field to sap Liquidity calculation module tables?
and how to add a field to a particular transaction code using a customer exits.
please tell me in detail.
thanks inadvance,
Regards,
Rekha

Hi Pranab,
Please follow the below steps to create an extra field and write code for that field through Infoset.
1-->Change in Infoset
u2022Go to SQ02 , enter Infoset name and click on Change Button
u2022Go to Extras (F5) button displayed on application bar.
u2022In Extras tab, click on 'Create' icon to create additional field E_NAME1, give as type C (character) and give desired length and. Enter header description as 'ShipToName'
u2022Select this field i.e E_NAME1 in one of the field group of Infoset.
u2022Go to Code section (Shift+F8) of infoset, Select Record Processing Event and write your logic code (condition) in this code section:
if vbpa-adrnr = space.
E_NAME1 = kna1-name1.
else.
E_NAME1 = adrc-name1.
endif.
2-->Generate the Infoset.
3-->Change in Query
u2022Go to SQ01(in a new session), give your query name (by selecting your user group) and click on change button.
u2022Check the field group in which you have added E_NAME1 field, then check E_NAME1 from Fields screen
u2022Click on 'Basic List' button; give line (row no.) and sequence (column no.) for extra fields.
u2022Execute/Test the Query, you will get desired result.
Please let me know, if you need more information.
Regards,
Dinesh
Edited by: Dinesh Tiwari on Oct 29, 2009 7:13 AM

How to Add fields in dynamic selection LDB BRF

Similar Messages

Maybe you are looking for