How to add function group to the  authorization object S_RFC ?

Hi All,
Can you  please tell you how to add the function group FG_DIAGLS_DATA_ENRICHMENT  to the authorization object
S_RFC?
In solman_setup under basis configuration when I execute the step "SetupDPC/DCC Web Service URL" its getting failed because of the
following error which i found it in the agent log
"java.rmi.RemoteException:RfcExecutionException; nested exception is:
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An
exceptionoccured during the execution of the function
'FM_DIAGLS_PUSH_PHYSICAL_HOST': RFC_NO_AUTHORITY >
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException:An exception
occured during the execution of the function
'FM_DIAGLS_PUSH_PHYSICAL_HOST': RFC_NO_AUTHORITY >
com.sap.mw.jco.JCO$Exception:No RFC authorization for function module
FM_DIAGLS_PUSH_PHYSICAL_HOST. <Mid"
Thanks,
Satheesh E

Hi,
Please follow below steps:
1) Go to SE01
2) Click on create New workbench request and give desc once popup appears, Click Ok
3) Now open the trasport in edit mode
4) Add
Program ID - R3TR
Object Type - FUGR
Object name - Name of the Function group
>note that if you tranport Function group all the latest Function modules in function group along
>with screens will be included in the transport.
Regards
Shital
Formatted by: Vijay Babu Dudla on Apr 25, 2009 5:08 AM

Similar Messages

  • How to add function group entry in Transport request...

    Hi
    I had a function group in which I had 4 function modules. I deleted one of the FM and hence in my Transport request, its entry was included. Along with that the function group was also included.
    I deleted that function group entry by mistake. Now I want to add back my function group into the transport. How do I do that ?
    thks

    Hi,
    Please follow below steps:
    1) Go to SE01
    2) Click on create New workbench request and give desc once popup appears, Click Ok
    3) Now open the trasport in edit mode
    4) Add
    Program ID - R3TR
    Object Type - FUGR
    Object name - Name of the Function group
    >note that if you tranport Function group all the latest Function modules in function group along
    >with screens will be included in the transport.
    Regards
    Shital
    Formatted by: Vijay Babu Dudla on Apr 25, 2009 5:08 AM

  • How to add  customer group(KNVV-KDGRP)in the  standard report?

    Dear  All,
    My customer requirment is that  Customer group (KNVV-KDGRP)wise  should be run  in  FBL5N report AND   Customer group should be shown in  FBL3N report.
    how to add  customer group in the  standard report?
    thanking you,
    regards,
    Rupang shah

    Hi,
    This is what I did for FBL5N with a developer because additional fields configuration does include certain tables.
    BTE1650  available for FBL5N and add a new field into one of those tables as an append structure and then use a BTE to populate the field for FBL5N.
    Hope that this helps
    Kind regards

  • Can we reuse the Authorization objects in MM01 for  Custom TCODE  ZMM01

    Hi all,
    We need to create screens  or transaction code ZMM01 which will have all views in the form of a tab like sales data will have a tab to input sales information like plant data as its own tab to input plant specific data
    ceating material  masters  entries in Ztables like ZMARA,ZMARC,ZMVKE.
    Now my question is can we use the same authorization objects which are being used for standrard MM01 transaction code because same users who use MM01 will use ZMM01.
    If this is possible how can I know what are the authorization objects which I need to program for my ZMM01 Tcode.
    All replies are rewarded.
    Regards
    Martin.

    hi yes
    it is possible go to transaction SU21
    and search MM_G object class you can reuse the same for ur Z transaction
    also u will have to use SU22 to assing tcode to the obejct class
    Harish

  • How to Add multiple entry to the group policy security filtering

    How to Add multiple entry to the group policy security filtering
    Is there any way we can add multiple entry to the Domain group policy Security filtering tab.Currently its not allowing to add more then one entry at a time.
    Getting Error like "only one name can be entered,and the name cannot contain a semicolon.Enter a valid name"

    Hi
    Are you trying to add more users or groups through Group Policy Management Security Filtering tab?
    Try right clicking on the policy and then edit
    Then in Editor Right click on the name of the policy and Properties
    Security tab and add user or group from this tab. Just make sure if you are adding user or groups "Select this object type" has
    the correct option also "From this Location" is set to your entire directory not the local server.
    Update us with the above.
    Thanks

  • How to add a user to the wheel group?

    How to add a user to the wheel group in leopard?

    In Leopard, users can be added to system groups using 'dscl'. For example, while logged into an "admin" account, the command below can be entered using "/Applications" > "Utilities" > "Terminal.app" to add a user "username" to the "wheel" group:<pre>
    sudo /usr/bin/dscl . -append /groups/wheel GroupMembership username</pre>
    If you prefer a GUI, "Workgroup Manager.app", included with the Leopard version of the "Server Admin Tools" can be used.
    http://www.apple.com/support/downloads/serveradmintools105.html

  • How to add a button to the grouped data in an AdvancedDataGrid?

    Hi,
    Can anyone please suggest how to add a button to the grouped data in the AdvancedDataGrid?
    I have tried extending the AdvancedDataGridGroupItemRenderer and using it as the groupItemRenderer but its not reflecting.
    For the leaf node the itemRenderer property works just fine.
    Please help!

    HI ,
    I want to add a push button on the ALV list out put which is comming as a pop up and I want this using classes and methods.
    I have got a method IF_SREL_BROWSER_COMMANDS~ADD_BUTTONS from class cl_gos_attachment_list  but still I am unable to get any additional button on the output ALV popup.
    Please help.
    Regards,
    Kavya.

  • CRM  IC Winclient - How to add new fields in the BP Search of TRX CIC0

    Hello Experts,
    I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
    Can you help me?
    Thanks in advance.
    Caíque Escaler

    Hi
    make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
    in spro in Define customer-specific search control -> mark fields with X.
    and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
    you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
    Regards
    Radek

  • How to add new fields to the DME file in F110

    Hi,
    We have a requirement add new fields to the file that is used in  F110.
    .I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
    Can anybody please help me in resolving the issue.
    Thanks
    Venkat
    Edited by: Venkat R on Jun 8, 2009 8:45 AM

    Hi,
    There is no function module for that, We have created our own function module and attached to that field.
    Refer the below code. This will fetch the document number.
    DATA: lwa_item   TYPE dmee_paym_if_type,
            l_fpayp   TYPE fpayp,
            l_fpayhx TYPE fpayhx,
            first_flag TYPE c,
            lv_lifnr   TYPE lifnr,
            voucher_id TYPE string,
            voucher TYPE string,
            invoice_id TYPE belnr_d,
            voucher_len1 TYPE i,
            voucher_len TYPE i.
      TYPES:
      BEGIN OF lt_regup,
            xblnr TYPE xblnr1,
            belnr TYPE belnr_d,
      END OF lt_regup.
      DATA: lt_regup TYPE STANDARD TABLE OF regup,
            lv_regup TYPE regup.
    Hope this helps.
    Raja.A
    Edited by: Raja.A on Feb 16, 2011 7:17 PM

  • How to add F4 help for the custom field of a custom table

    Hi All,
    How to add F4 help to the custom table field? in the table maintainance when user clicks on F4 i want to provide possible values for this field I am trying to write the code in the screen of table maintainace like the following
    PROCESS ON VALUE-REQUEST.
      FIELD ZTEST_MAH_F4-KUNNR MODULE zVALUE_kunnr .
    But when i am double clicking on module it's giving options to create include program but after that it's giving user is currently editing the table i am not getting this can some body clarify my doubt it's gr8 if some body give some examp code
    Thanks&Regards
    mahesh

    Hi,
    Create a subroutine under the event and call the following FM
    1. Select all the related data into an itab, for ex i_kunnr
    2.    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
        DDIC_STRUCTURE         = ' '
           retfield               = 'KUNNR'
        PVALKEY                = ' '
           dynpprog               = sy-repid
           dynpnr                 = '1000'
           dynprofield            = <selection screen field>
        STEPL                  = 0
        WINDOW_TITLE           =
        VALUE                  = ' '
           value_org              = 'S'
        MULTIPLE_CHOICE        = ' '
        DISPLAY                = ' '
        CALLBACK_PROGRAM       = ' '
        CALLBACK_FORM          = ' '
        MARK_TAB               =
      IMPORTING
        USER_RESET             =
          TABLES
           value_tab              = <b>i_kunnr</b>
        FIELD_TAB              =
           return_tab             = < return table >
        DYNPFLD_MAPPING        =
         EXCEPTIONS
           parameter_error        = 1
           no_values_found        = 2
           OTHERS                 = 3

  • How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

    My question is that How to add a report into the SAP-SCRIPT .
    by using PERFORM ......ENDPERFORM
    I don't know how to used it .

    Hi Sandeep,
    Please check this link
    http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
    http://www.allinterview.com/showanswers/37425.html
    Calling ABAP Subroutines: PERFORM
    You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
    PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
    Syntax in a form window:
    /: PERFORM <form> IN PROGRAM <prog>
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
    The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
    FORM <form> TABLES IN_TAB STRUCTURE ITCSY
    OUT_TAB STRUCTURE ITCSY.
    ENDFORM.
    The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
    The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
    From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
    Definition in the SAPscript form:
    /: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
    /: USING &PAGE&
    /: USING &NEXTPAGE&
    /: CHANGING &BARCODE&
    /: ENDPERFORM
    / &BARCODE&
    Coding of the calling ABAP program:
    REPORT QCJPERFO.
    FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA: PAGNUM LIKE SY-TABIX, "page number
    NEXTPAGE LIKE SY-TABIX. "number of next page
    READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
    CHECK SY-SUBRC = 0.
    PAGNUM = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
    CHECK SY-SUBRC = 0.
    NEXTPAGE = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
    CHECK SY-SUBRC = 0.
    IF PAGNUM = 1.
    OUT_PAR-VALUE = u2018|u2019. "First page
    ELSE.
    OUT_PAR-VALUE = u2018||u2019. "Next page
    ENDIF.
    IF NEXTPAGE = 0.
    OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
    ENDIF.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    Best regards,
    raam

  • How to add material group in rvinvoice standard script?

    how to add material group in rvinvoice standard script?
    regards

    Hi
    You have to copy the standard script first .
    you need to write External subroutine in layout.
    This is just for basic info..you can search in sdn external subroutines in script..you get so many inputs.
    Thanks

  • One of the functional groups of the Logical Database "SDF" does not appear.

    Hello,
    I have a problem with the logical database "SDF". It has already defined 3 functional groups. When I select the buttom "display the contents" I can see all these groups with their owns fields.
    The problem is that when I use a transaction which contains this logical database, in the dynamic selections I can only see two of the functional groups. The last one doesn't appear there and I don't know why.
    How can I resolve my problem?
    Thank you very much in advance.
    Best Regards.

    1 hour is the default timeout for "ExternalCommandTimeout". So, it could be that this one measure group's fact query is taking longer than 1 hour for the first record.  You can see the query in the error messages and might like to try it out
    manually.  Note, a common issue is with referenced dimensions or Distinct Count when an inner join or Order By are added to the fact queries.
    A simple solution might be to simply increase the ExternalCommandTimeout in the SSAS properties page.  Try 7200, and if it completes in less than 2 hours, or fails after exactly 2 hours, you know this is the issue.
    Richard

  • How to create function group in Maintainence view

    Hi,
    For creating a maintainence view of a particular table (only1) what is the need of a function group. How can i create a function group like what type of includes, etc are present in the function group,etc.
    Thanks,
    Arnab

    in the table maintenance view
    just enter the function group name any(Z* )
    and give the screen name (single or over view Scree)
    It will automatically creates the function group which ever you specified.
    now the function group contains
    the screen, TOp include ...
    Thanks
    Sekhar.

  • How to add new group entry in Cisco Vpn using powershell

    I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
    $username = 'TestUser'
    $userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
    $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
    $username,$userPassword
    $password = $credentials.GetNetworkCredential().Password
    Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
    .\vpnclient.exe connect $vpn_profile user $username pwd $password
    Write-Host "You Are Connected"
    cd "C:\"

    Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
    That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
    If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
    on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
    put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
    Update: Added more info; clarified

Maybe you are looking for