How to add fury trim around an image

What i want to do is add Fur around the outer edges of an image. Frame the image with fur and have the corners with a natural transition. I am working on a Poster for a Pimp/Ho Party and i want to trim the image with "PIMP" fur. Does anyone know of any tut's for this type of thing?
Thanks

The poor choice of theme aside You might want to experiment with the Brushes.
Attached are screenshots for settings of a simple elliptical Brush that may be useful, even better would be to create a custom Brush Preset of one »hair« – though the result will not be »realistic«.

Similar Messages

How to add a Border around an ImageView

Hi all,
I'm adding a row of photos in my application which are being resized to fit into some constrained space with Preserve Ratio true. They are put in a TilePane, with a Label below each photo.
Basically, I give all my ImageViews a fitHeight of 120 pixels, and let them determine how wide they will become themselves in order to preserve the ratio.
It looks great.
However, I would like to add a Border around these images, as they sometimes fade too much into the background to clearly see the edges. ImageViews themselves donot support borders, so I'm forced to wrap these ImageViews inside another container.... but, no matter what container I use, the container itself refuses to resize itself to fit exactly around the image -- it seems to be completely oblivious of the real size of the Image -- with some parameters the ImageView will simply render itself outside the edges of its container, and with other parameters the container is wider than the ImageView leaving a gap on the right side.
This is yet another instance where I want my ImageViews to resize themselves to fit the available space, resulting in a huge struggle to force these components into their proper straight-jacket. Anyone got any solutions for this?

I'm afraid that also won't work, as the Image needs to be scaled, and the dimensions you are using are from the unscaled image.
I've however am now using this class to get what I want, together with a stylesheet to specify the border it works and I get nice borders.
package hs.mediasystem.util;
import javafx.beans.property.BooleanProperty;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.geometry.Bounds;
import javafx.geometry.Insets;
import javafx.geometry.Pos;
import javafx.scene.Node;
import javafx.scene.image.Image;
import javafx.scene.image.ImageView;
import javafx.scene.layout.Region;
import javafx.scene.layout.StackPane;
public class ScaledImageView extends Region {
private final ImageView imageView = new ImageView();
private final StackPane effectRegion = new StackPane();
private final ObjectProperty<Pos> alignment = new SimpleObjectProperty<>(Pos.TOP_LEFT);
public ObjectProperty<Pos> alignmentProperty() { return alignment; }
public final Pos getAlignment() { return this.alignment.get(); }
public final void setAlignment(Pos pos) { this.alignment.set(pos); }
public ScaledImageView(Node placeHolder) {
    getChildren().add(imageView);
    getChildren().add(effectRegion);
    getStyleClass().add("scaled-image-view");
    effectRegion.getStyleClass().add("image-view");
    if(placeHolder != null) {
      effectRegion.getChildren().add(placeHolder);
      placeHolder.getStyleClass().add("place-holder");
      placeHolder.visibleProperty().bind(imageView.imageProperty().isNull());
public ScaledImageView() {
    this(null);
@Override
protected void layoutChildren() {
    Insets insets = effectRegion.getInsets();
    double insetsWidth = insets.getLeft() + insets.getRight();
    double insetsHeight = insets.getTop() + insets.getBottom();
    imageView.setFitWidth(getWidth() - insetsWidth);
    imageView.setFitHeight(getHeight() - insetsHeight);
    layoutInArea(imageView, insets.getLeft(), insets.getTop(), getWidth() - insetsWidth, getHeight() - insetsHeight, 0, alignment.get().getHpos(), alignment.get().getVpos());
    Bounds bounds = imageView.getLayoutBounds();
    effectRegion.setMinWidth(bounds.getWidth() + insetsWidth);
    effectRegion.setMinHeight(bounds.getHeight() + insetsHeight);
    effectRegion.setMaxWidth(bounds.getWidth() + insetsWidth);
    effectRegion.setMaxHeight(bounds.getHeight() + insetsHeight);
    layoutInArea(effectRegion, 0, 0, getWidth(), getHeight(), 0, alignment.get().getHpos(), alignment.get().getVpos());
@Override
protected double computePrefWidth(double height) {
    return 0;
@Override
protected double computePrefHeight(double width) {
    return 0;
public final ObjectProperty<Image> imageProperty() { return imageView.imageProperty(); }
public final Image getImage() { return imageView.getImage(); }
public final void setImage(Image image) { imageView.setImage(image); }
public final BooleanProperty preserveRatioProperty() { return imageView.preserveRatioProperty(); }
public final boolean isPreserveRatio() { return imageView.isPreserveRatio(); }
public final void setPreserveRatio(boolean preserveRatio) { imageView.setPreserveRatio(preserveRatio); }
public final BooleanProperty smoothProperty() { return imageView.smoothProperty(); }
public final boolean isSmooth() { return imageView.isSmooth(); }
public final void setSmooth(boolean smooth) { imageView.setSmooth(smooth); }
}

How do I add an outline around an image in Elements 10

I have an image that I created via Elements 10... The main body of the image is black and I am wanting to add a white outline around the image so I can place the image on a black background... Can someone advise how to add an outline including colorizing the outline around the image... Thanks

Depending on what you want, you may need to add some canvas to give the border a place to be (Image>Resize>Canvas Size) but you can just press Ctrl+A/Cmd+A to select all, then go to Edit>Stroke (outline) selection, where you can choose the parameters of the border stroke. You can't choose Outside for the location, though, since that would put it off the canvas entirely where it wouldn't be visible.

How to add a loader to an image gallery loading content using only actionscript

hi i am loading all thumbs and images in a container on a single frame using action script..but the size of the swf becomes 1.2 mb so i want to add a loader to it...the loader i am trying to add counts the frames but my file has just one frame so the loader doesnot show up..
here is the script of my gallery..and the timeline has just one frame...
import mx.transitions.Tween;
import mx.transitions.easing.*;
this.createEmptyMovieClip("container",1);
var imagesNumber:Number = 18;
var scrolling:Boolean = true;
for (i=1; i<=imagesNumber; i++) {
container.attachMovie("thumb"+i,"thumb"+i+"_mc",i);
myThumb_mc = container["thumb"+i+"_mc"];
if (i==1)
myThumb_mc._x = (0.0)*myThumb_mc._width;
else
myThumb_mc._x = ((1.2*i)-1.2)*myThumb_mc._width;
myThumb_mc._y = (Stage.height-myThumb_mc._height)/2;
myThumb_mc._alpha = 100;
myThumb_mc.largerImage = i;
myThumb_mc.onRollOver = function() {
this._alpha = 60;
myThumb_mc.onRollOut = function() {
this._alpha = 100;
myThumb_mc.onRelease = function() {
this._alpha=100;
for (i=1; i<=imagesNumber; i++) {
var myClip = container["thumb"+i+"_mc"];
myClip.enabled = false;
scrolling = false;
_root.attachMovie("image"+this.largerImage,"large_mc",2);
large_mc._x = (Stage.width-large_mc._width)/2;
large_mc._y = (Stage.height-large_mc._height)/2;
new Tween(large_mc, "_alpha", Strong.easeOut, 0, 100, 0.5, true);
new Tween(container,"_alpha",Strong.easeOut,100,50,0.5,true);
large_mc.onRelease = function() {
scrolling = true;
var myFadeOut = new Tween(large_mc, "_alpha", Strong.easeOut, 100, 0, 0.5, true);
new Tween(container,"_alpha",Strong.easeOut,50,100,0.5,true);
myFadeOut.onMotionFinished = function() {
for (i=1; i<=imagesNumber; i++) {
var myClip = container["thumb"+i+"_mc"];
myClip.enabled = true;
large_mc.removeMovieClip();
container.onEnterFrame = function() {
if (scrolling){
this._x += Math.cos((-_root._xmouse/Stage.width)*Math.PI)*20;
if (this._x>0) {
this._x = 0;
if (-this._x>(this._width-Stage.width)) {
this._x = -(this._width-Stage.width);
anyone knows how to add a loadre to this...?
thanks..

Check these links for tutorials on loading images
http://www.kirupa.com/developer/flashcs3/loading_image_as3_pg1.htm
http://tutorials.flashmymind.com/2009/02/loading-multiple-images/

How to add a jpg. watermark to images in bridge?

I'm trying to work out how to add a jpg. watermark to my images in bridge and also how to batch add the watermark.

add a jpg. watermark to my images in bridge and also how to batch add the watermark.
You can't do so in Bridge, only option for a watermark inhere is via the Output Module on a PDF contact sheet.
Best try this question in the Photoshop forum, they might have better answers because you need to create an action in PS to get what you want.

ADD A LINK AROUND MAIN IMAGE IN PHOTO GALLERY

Can anyone help with the code for this. I need to add a link
to each image as it appear in the spry photo gallery. Each link
would be different and set in the xml file can some one help
please. I can't figure this one out.

It's usually something like:
<div spry:region="ds1" spry:repeat="ds1">
<a href="{link_dataref}"><img src="{image_dataref}"
/></a>
</div>

How to add a border around images posted to Facebook?

I am using LR 4.1, also usis PS CS5.
Anyone who uses Facebook to showcase image galleries knows that Facebook changes how images are displayed from time to time. One month it will be on a black background and the next on a white background. And then they put overlay's on top of your images and they change things around whenever they wish. There is not rock solid consistency from Facebook on how they display your images across devices or over time.
What I am trying to do is to add some consistency to how my images are displayed by adding my own border to my images. I need some ideas on how to best do this. The way that I have been doing it does not appear to be ideal and I think someone must have a better way.
Ideally, I would want Lightroom to add a border for me based on some setting under the export manager. But as far I know there is no setting to do this? (Why doesn't lightroom have any border options anywhere yet for anything it exports? This would be relatively simple I think.)
Here is the only way I know how to solve my issue.
First, my other considerations:
I want to keep my original images in my catalog in tact and as is w/o a border and with layers if it is a .psd file. I do NOT want to destructively add a border to the catalog images, only the images that end up on Facebook. I also want to add my watermark image to the final image so that it is done as the last step so that the bottom part of my watermark shows my web site address over the white border on the bottom of the image. Using a droplet and the watermark in the same step does not work properly because it applies the watermark before it runs the action, not after.
I have created an action to add a x pixel white border by:
Merging (flatten) all layers
Creating a new unlocked background "image" layer
Expanding the canvas by x pixels.
Creating a new white filled layer and moving it to the bottom of the layer's pallet.
Adding a 2 pixel black inside stroke to my image layer and adding a drop shadow.
I created a droplet from this action and put it in the droplet folder for LR.
Now for the repeated steps that I am going through...
Select the images that I want to write to Facebook.
Export these images to a new folder using the droplet.
Import the folder of all of these images back into Lightroom.
Move the new images with borders on them into the correct LR FB publish service.
Publish the photos using the sharpening and watermark settings.
Delete the .psd files created in Step #2
The steps that I would like to avoid are #2, #3, #6
Or maybe I am going about this all wrong? Anybody have any better ideas?

You may find it much easier to use the Migrify plug-in from Tim Armes/Photographers Toolbox which does what you want from within Lr.

How to add a border around a video (padding out to a larger size)?

Hi,
I'm having problems doing this in Quicktime Pro. I don't want to increase the size of the visible part of the video, just pad it out with black space. I created a gif file of the size I want and pasted it in, but rather than the video increasing to fit the pasted image, the opposite happened and the image was scaled down to fit the video. Any help gratefully appreciated.

First issue is the GIF format (only 256 colors). Don't use that format.
To add a "black" box (or any other color) to your existing QuickTime file you should first make your image file in a format (other than GIF) that also supports transparency.
Depending on your image editing software the PNG format is the best choice. But JPEG will also work if your use 32 bit color (no transparency layer).
To add this image to your existing QuickTime file follow these steps:
Create the image file (1 bit for just black and white colors) and size it to the dimensions desired. JPEG or PNG will work nearly the same but JPEG doesn't support alpha channels.
So, lets say your have a 320X240 QuickTime file but want a "box" around it sized at 320X320 (square).
Create a 320X320 all black image saved as PNG or JPEG.
Open that file with QuickTime Pro, select "all" (Control-A) and "copy'"(Control-C).
Switch to your 320X240 QuickTime "video" file.
Select all (Control-A) and move to the Edit menu. Pick "Add to Selection & Scale". This will add your image to the entire "video" portion.
Control-J to open the Movie Properties window.
Highlight (single click) on the "Video" track portion of your new composite video.
Click the "Visual Settings" tab.
Here is where you change to position of your video track in relationship to your image track.
The "Offset" is what you need to adjust (because your video is smaller in dimensions than the image track).
Default positioning is 0,0 (upper left). You need to add new values to the offset to set the position of the video track. It may take a few tries to get what you want. Changing the offset values until you get the size and shape you desire.
Save As. Give the file a new name and save as "self-contained" to make a new file.
These same steps can add "video backgrounds" to another "video" track.
One of my pages to show a QuickTime example:
http://homepage.mac.com/kkirkster/crosstown/index.html

How to add title/caption to each image in Bridge web gallery

Hi,
I am creating a web gallery within Bridge and I want to add a title and caption to each image in my web gallery. How do I do that? The only thing I see is the Site Info. section and that adds a title and caption to the entire web gallery (including each image) and I want different titles and captions for each image. There must be a simple way to do this I just haven't figured it out yet. Any help would be greatly appreciated. Thank you!
ashmic19

Thanks Curt Y for your help. The thing is I have to use only Bridge. I looked up this problem on http://www.experts-exchange.com/ and they said it was not possible to add titles and captions for individual images (slides) in a web gallery in Bridge. They seemed to imply that this was overlooked. So I input what I could based on what was provided by Bridge and turned it in. Thanks to all who viewed and replied to this post. I appreciate it.
ashmic19

How to add a 'Download' feature in image and video gallery?

Hello,
I have created an image gallery on one screen and placed few videos on another screen.
Now, I want to add a download feature in photos & footages both.
Does anyone know how so I do that?
Prompt response will be highly appreciated.
Thanks in advance.
Jay

Hi,
Could you please provide additional information on what you mean by Download feature ? Where do you want to download these images and video from ?
Olivier

How to add white border around my Banner?

Hello,
I am trying to add a small border around my banner.
I tried to code it in but it didnt seem to work. Not sure why?
So i added just without the border.
Any thoughts?
Thank you!
Ivan
Here is the URL - http://www.the-electronic-cigarette.net

Your header is defined as an id in style.css
So, in your CSS:
#branding {
          background: #ffffff url(images/sky.png) top left repeat-x;
          margin-bottom: -20px;
Change to:
#branding {
          border-color: fff;
border-width: 3px;
          margin-bottom: -20px;
That will create a 3 pixel border around the div.

How to add customization logic around lockPref() when using it in .cfg file

I wanted a way to apply the lockPref only when certain conditions are met and also add some customization logic around the lockPref functionality. How can I acheive this?. Any sample script to acheive this is greatly appreciated.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

mozilla.cfg is a JavaScript file, so you can try to add the instruction to that file to see if that works.
What kind of customizationlogic do you have in mind?
<code>if (condition) {
lockPref(prefName, prefValue);
</code>

How can add some text on the image

I have images in the gif format.
How can I add some text in specified point on the image?
Fpor example, by using Intermedia plugins?

We do not support this functionality. I suspect you are talking about watermarking?
I would suggest you send a message to [email protected] , the product manager for interMedia and describe your application. This would be helpful in defining future requirements. He may also know of partners that can supply this technology.
You can add text to an image using JAI or some other packages before the image goes into the database, or when it goes out.
Larry

How to add a button to background image in Fireworks

Hello!
I created recently a clickable button with a rollover effect. I made it iin FW CS5 as a symbol and exported. So I have now .html file and 2 images files (2 states of my button). The button itself works fine on a live site. Now, I want to learn a technique to be able to put that button with the effect and the link in it on an image (it would be like a background for the button).
Thanks in advance!

Two things.
First, when you save from Fireworks, you get a Fireworks document .png, complete with layers, vector objects, and all the other various complex definitions Fireworks can support. Fireworks is the only program that can interpret this information. Any other program (such as a browser) can display what the document looks like, but it's probably much larger than it needs to be for the Web. For Web use, you want to export an image (.gif, .jpg, or one of the bitmap .png variations). Be careful when you export an image to a bitmap .png format that you do not use the same name as your master FW document and overwrite your FW document.
Second, DW is not a layout program. In order to create HTML files, you probably ought to learn a bit about HTML. I recommend you work through one or both of these tutorials:
http://articles.sitepoint.com/article/html-css-beginners-guide
http://net.tutsplus.com/tutorials/html-css-techniques/design-and-code-your-first-website-i n-easy-to-understand-steps/
An HTML file defines blocks of content. The blocks can be stacked or can contain other blocks. The basic html file contains two blocks: the head section and the body section. The only thing in the head section that shows is the page title in the browser's address bar. Also, JavaScript code is often put in the head section. The body section contains all the visible content of your page. Within the body section, you add blocks of content that are HTML elements.
Content blocks can have properties., One of the properties is a background image. If you want to have a page background, then you need to create an image, export it from Fireworks, and then set it as the background for the body section of the page. That image is then behind all the content blocks you define within the body section: buttons, paragraphs, other images, tables, anything. Most of these other elements can also have background images defined, too.
Fireworks produces images that are defined by what's visible as well as any active slices (such as those created by buttons). When you exported your background image with a button, Fireworks gave you an HTML table (one of the many kind of content blocks) because the button defined slice regions. Fireworks can't "know" that you really wanted a background image and then the HTML to put a button in a certain location on a page. It created the images you defined (but not what you wanted).

How to add a hyperlink to a image button in theme area?

Hi!
We need to make an image button (on the theme area) to be
clickable -- i.e., once you click that image button, it will
call www.yahoo.com.
Please advise how to do it.
Points guaranteed. Thanks!

Hello,
Maybe this will help you?
http://help.sap.com/saphelp_nw70/helpdata/en/9d/52f973810cb448842e35e13ad6c992/frameset.htm
Gene Madikrama

How to add fury trim around an image

Similar Messages

Maybe you are looking for