How to add generic parameter for raw types in public Methods

Hi,
I have a method declared in Component Controller with the UI for adding methods.
I want to add a parameter of type HashMap<String,Object>. How can I do this in the UI?
I just geht HashMap, how do I add <String,Object>?
When I'm adding it direct in the Code, after Rebuilding the project it's again only HashMap.
Is there a way to add <String,Object> to the HashMap?
I want to get rid of the warning and don't wan't to supress the warning.
Best regards,
Peter

HI,
thanks for your answer.
Too bad that there is no other way.
Thanks.
Best regards,
Peter

Similar Messages

How to add a parameter to sql query in report

Hi
How to add a parameter to sql query in report.
Parameter is from Visual studio
example:
select * from tab1 where dl=parameter???
I have VS 2008 prof CR XI R2, mysql

Hello,
If you have this API available then you can modify the record selection formulae in code to add filtering:
string recordSelectionFormula = "{T_INV_RPT_ADDR.IND_PROMUS} = {?P_PROMUS?} AND {T_INV_RPT_POINT.INVOICE_DATE} = DATE(2008, 05, 31) AND {T_INV_RPT_POINT.CHECKOUT_DATE} = date(2008, 04,29)";
CrystalDecisions.CrystalReports.Engine.ReportDocument.RecordSelectionFormula = recordSelectionFormula;
You have to format and follow the rules as in the Designer so not too much work to get this to work.
CR for .NET may not have the ability so you will need to upgrade to a Developer version of Crystal Reports.
Thank you
Don

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add list of multiple file types to file type of file dialog box in LabVIEW

How to add list of multiple file types to file type of file dialog box in LabVIEW?
In file dialog box there is option to add only one file type,in the list,not by seperating commas,
regards,
Naresh.N

Write the file types in pattern Input string, separated by a semicolon ;
For example: *.vi;*.doc;*.jpeg;*.xls
This should return the set of files with matching extensions
Message Edited by devchander on 09-10-2008 08:02 AM
Message Edited by devchander on 09-10-2008 08:03 AM

How to create an extension for generated type idoc

Hi all,
Can u please look into this
How to create an extension for generated type idoc ? for example Idoc type BATMAS02

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

HOW TO: Add /manipulate columns for a GridControl

HOW TO: Add /manipulate columns for a GridControl when the columns (attributes) are from different entity objects.
This HOWTO describes the basic steps of using attributes from different entity objects for a GridControl.
One way you can create a GridControl which contain attributes from different entity objects is to create a view object and base it on the entity objects which contain
the desired attributes.
Here are the basic steps:
1.Create a new view object (or use an existing view object) by selecting File>New from the menu, clicking the Business Components tab and double-clicking
on the View Object icon.
2.In the View Object wizard change the name to something meaningful.
3.Select the entity objects you will base your view object on.
4.Nivigate to the attribute screen and select the attributes you would like to include in your view object from each entity object. At this point you can also create
a new attribute by clicking the "New" button. The new attribute can be a concatenation of other attributes, derived from a calculation etc.
5.In the query panel of the View Object wizard, click "Expert mode" and enter a query statement. You write complex queries such as decoding a set of attribute
values.
6.Add your newly to your newly created view object to the application module by double-clicking on the application module in the navigation pane and selecting
your view object from the list.
7.Create a new row set.
8.Bind row set to a query by editing their queryinfo property and selecting your view object and its attributes from the queryInfo pane.
9.Create a GridControl and bind it to the row set by editing the dataItemName property of the GridControl. Since the GridControl is bound at the row set level
all of the related attributes are automatically added.
null

Michael,
Are you intending this as a commercial solution or a work around?
To take an existing equivalent, one would build a view in the database tailored for each grid in an Oracle Forms application. Or a separate query layered over tables for each form/grid in a Delphi or Access application? Even if it is ninety nine percent the same over half a dozen forms/grids?
And now you've added a whole slew of "slightly different" rowSetInfos to maintain.
So if you wanted to add a column that needs to appear everywhere... you've just increased the workload multi-fold?
That would be a management nightmare, wouldn't it? Not to mention yet more performance cost and a slower system?
Hmmmm..... I'm not sure I like where this is headed... someone needs to do some convincing...
null

How to Add a parameter of currency exchange rate in the selection screen

Dear Friends,
How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
Thanks,
Sridhar

TCURR-UKURS.
~Suresh

Hi All how to add new payscale for an employee in sap hr-abap,its urgent

Hi All ,
how to add new payscale for an employee in sap hr-abap,its urgent.
Message was edited by:
bharat kumar
Message was edited by:
bharat kumar

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

How to add a border for Panel (jdk 1.1) ?

how to add a border for Panel (jdk 1.1) ?

Border's are a Swing feature, you will have to draw one by yourself (extend Panel and override paint()).

How to add F1 help for a field on ALV grid

Hi All,
When we execute a program, the output is displayed using ALV grid.
on the ALV grid, if we press F1 on a field, it should popup the help document.
How to add F1 help for a field on ALV grid.
Thank you all in advance.

fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
A.

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to add a port for a IP cam in the airport extreme setting? thx!

I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!

atwoodjordan, Welcome to the discussion area!
See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead.

How to add extra options for style of images. iPad version has far more options than Mac version

How to add extra options for style of images in pages. iPad version has far more options than Mac version

Thank you, you made me go look again and I realised the ones I use on the iPad are under Borders not style and they are on Mac also. I feel a bit silly but I wouldn't have got there without your prompting. Do you mean by "create your own" using the borders and then saving as a style or can you create something that is not in either?
Thanks again

How to add indian english for siri?

how to add indian english for siri... siri no use for indian user...

You cannot, it is something only Apple can do.
The phone merely listens to the commands, digitizes into some proprietary format and sends it to Apple's servers, who do the heavy lifting of interpreting what you want. So you can't hack the language into the phone.

HT201320 how to add an account for Google apss?

how to add an account for Google apss?

Hello,
To create an account for googole to use their applications, go to www.google.com, on the upper right hand corner of the browser, is will say sign in. Click that. Then it will bring you to a page in which you can sign in or create a new account. Create a new account following the steps and then you are set. Once you have downloaded a google app, you can use that same username and passward that you created at www.google.com
Hope this helps,
-Allen

How to add generic parameter for raw types in public Methods

Similar Messages

Maybe you are looking for