How to add group managers who will be able to add members?

I go to beehiveonline.oracle.com, select "Create group or add members", click through to page with Group Name, Add new members, View members, etc. I click on name of group to arrive to "Group Edit" page, where I add group manager emails. I enter new group manager emails (Oracle employees) and click "Save" - it takes me back a page as if it saved. But how do I confirm that the group managers were added? Going again to the Group Edit screen it expected to see the new email addresses listed at bottom of page below entry field, but they are not added there.
thanks

Hi,
If you are using IE then there is problem in this browser that it takes data from browser cache sometimes tht's why showing last time details although they are updated. To solve the problem try following steps in IE:
1. open 'Tools' tab in IE
2. click last option 'Internet Options'
3. click 'General' Tab (first tab)
4. In this second header is 'browsing history'
5. click on 'Settings'
6. in Settings you can see list of options for 'check for new versions of stored pages'
7. from this list select the radio button corresponding to 'Every time I visit the webpage'
HTH, :)
Vikas

Similar Messages

How to add members in REDO group in RAC

Hi All
I need to know the syntax to add members in redolog group in RAC database. Currently i have 4 groups (2 belonging to each thread) and one member in each group. I want to multiplex.
Thanks in advance

Check out:
http://www.lc.leidenuniv.nl/awcourse/oracle/rac.920/a96600/mancrea.htm

How to add members to aclGroupAddr without being ldap directory manager?

Shared mail folders can be shared to a group e.g [email protected], how does one allow a delegated administrator to define the members of the group. I assumed that it referred to a group created in DA, but the value aclGroupAddr does not get updated for the users added to the group. The only way I can see how to control the mailing list group mambers is to add the group email address to the aclGroupAddr field for the useer in ldap (using DSCC). Is there a better way?

ethoms wrote:
Shared mail folders can be shared to a group e.g [email protected], how does one allow a delegated administrator to define the members of the group.
You cannot use DA for this purpose at this time. There is an RFE which if implemented could allow you to use a static-groups defined in DA to restrict access to a shared mail folder.
RFE#6264218 - "Make the group representation used in user entries to indicate ismemberof more configurable".
This is an old RFE which needs customers to push for it to be implemented.
I assumed that it referred to a group created in DA, but the value aclGroupAddr does not get updated for the users added to the group. Correct. You need to manually add this attribute to each user that needs access to the folder using some other means e.g. ldapmodify.
The only way I can see how to control the mailing list group mambers is to add the group email address to the aclGroupAddr field for the useer in ldap (using DSCC). Is there a better way?No.
Regards,
Shane.

How do I know If i will be able to go back to lion from maverick?

I have downloaded Maverick in my computer but i dont want it anymore, i have been reading and i understand that I can go back to the original OS that came with my machine when i bought it if y command option r when i boot my imac and the erase the macintosh hd. My question is, is it for sure that Lion OS will appear in the utilities after erasing hd macintosh? Because when I boot th imca pressing the option key what I see is, two disks, Macintosh HD and INternet Recovery 10.9.3, which is maverick, what does it mean? PLease help!!! thanks!!!

You already posted this question and got your answers.
Please follow the instructions in your original posting!
https://discussions.apple.com/thread/6355343?tstart=0
You will need to erase your main OS X partition first, but leave the recovery partition.
If you erase the main partition first, OS X Recovery install WILL reinstall the original OS X version that came on your Mac.
You got good info and advice from regular contributors that have even more Mac experience than I.

How to add members for existing outline

Are there any ways to add year members(jan,feb,mar...)
every year to an existing outlines other than manually adding.

The choice to use 2 dimensions (Years,Months) or a single dimension with months rolling up to years really depends on the purpose of the App. For many accounting related apps, it's preferable to have the information in 1 dimension so that YTD and quarterly rollups are simpler - instead of being a combination of members across 2 dimensions.
I would recommend making a simple Excel file with 2 columns - first column has your Year, second column has your month. Save it as a txt file, then use a dimension build load rule to build the children.

How to add members to my creative cloud team?

Hi,
I´m unable to assign new members to my creative cloud team. I don´t have "team management" option available on my profile. What could be the problem?

Hi Valpuri,
Welcome to Adobe Forums
See the link mentioned below for solution and let us know if that helps!
http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html
Thanks
Garima

Anyone know how to reach someone in customer service who will not out and out LIE to us?

Just so frustrated right now... in the near week since my husband's iPhone was stolen, we have spoken to four different reps and three so-called supervisors. Each one has either made the problem worse or actually lied to us. Does anyone know how to reach someone at Verizon who will help us? We have three iPhones with Verizon and are ready to leave for AT&T.
So far, this is what we've had:
1. As we were tracking the phone with the police to get it back, Verizon tech support advised us to wipe the phone because we'd still be able to track it. WRONG. Phone lost forever. Verizon clearly does not understand what "wipe" means on MobileMe. What they should have said is, "We don't know for sure, so don't wipe it."
2. Rep transferring my husband's phone number to a backup handset transferred MY number to that phone, deactivated MY iPhone and reported it as stolen. When they were trying to fix it, we were assured that our unlimited data plan would not be affected. WRONG. Reps are now refusing to give it back.
3. Next rep advised us to get insurance on the phones because if anything happens, they are replaced for free. WRONG. $199 deductible, which we found out from the next rep.
4. The supervisor we spoke to yesterday said she would pull the tapes from the call center, review them to make sure that IT gave us the wrong information, and then call us back the next day with a discounted rate on a new iPhone. She gave us her name and direct number... both of which were bogus. The number goes to a media specialist at some public school. Subsequent reps have told us that there is no way anyone at Verizon would say that.
5. We have been promised three times that a supervisor would call us within 24 hours... almost a week later, no calls from anyone.
So if anyone has any leads on how to speak to someone who will make this nightmare go away, please, please, let me know. Thank you.

feochadan wrote:
Thanks to this board, my problems were solved! This thread can probably be deleted.
The point of this board, being a peer to peer forum, is so that people can learn how to resolve issues that others have already gone through. Please let us know how it was resolved so that others in the future with the same issues can be assisted.

How do I know if it will fit on one DVD?

So I am working on a DVD project (My first one) and I have about 12 movies that are about 20-25 minutes each in .avi format. The total size for all of these movies is about 3.07 GB.
How do I know if iDVD will be able to fit all of these movies on one DVD? Does it go by the 60min rule regardless of file size, or will all twelve movies be able to fit on one DVD? a DVD golds 4.7Gb of information right? So it should fit theoretically, but it is almost 3.5 hours of video.
Is there a fill bar or something within iDVD that can estimate how much space I have left for a DVD based upon the images, menus and movies I add to a project? I dont seem to find one in the iDVD project window and the Help file did not turn anything up.

The size (MB or GB) of the input files doesn't matter to iDVD. What matters is the length (in time).
iDVD renders/compresses/multiplexes your video into MPEG2 format which is the format of a playable DVD. With a single-layer DVD you can fit up to 2 hours of content (video, titles, etc.); with a dual-layer DVD you can fit up to 4 hours of material. iDVD will make choices of how to render your video depending on your quality choices in iDVD Preferences.

How to add a editable section to a book

Hello,
I'm working on a guide for a book and in this guide there is going to be a section in which the reader will be able to write down their experiences with whatever is related to the content. The best way to describe it is as a section where notes are to be taken by the reader. Is iBooks Author capable of doing this?

Books made with iBA, when viewed on iPad already have a Notes facility.
Tap on the iPad screen to open the top menu bar, third icon from left opens the Notes and will tell you how to use.
Your readers will be able to add a note and create study cards.
Check this.... https://discussions.apple.com/thread/5567848?tstart=0

Using a security group to add members to the collection question

Hi,
I have a collection created in SCCM 2007 that is using a security group for membership. So I added a computer to the security group in AD but when I go to SCCM and click on the collection I dont see the computer in the collection. Should it show here or
because it is a security group based membership will it not show the members?
THanks!

Details from Active directory are added to SCCM database through discovery methods. Please ensure that AD security group discovery and AD system discovery are enabled in the primary site. If they are enabled, check the frequency set for these discovery
methods. Once you added these computers to the AD group, you need to wait till the next discovery cycle before it appears in SCCM collections. Till that point, SCCM database will not have information about the group memberships of these computers

How can I find out who hasn't received a text message in group texts?

I sent the same text to a group of people but 'message failed' showed. Some recipients replied to my original text so obviously received it. How can I found out who didn't receive my text?

Hey VictorSMiller,
Thanks for the question. This can be done by viewing the contact info in Messages. Simply tap “Contact” in the top right corner, then tap the icon. This will bring up the contact card, and the number the message was sent to will be highlighted in blue.
View someone’s contact info in Messages.
To quickly view someone's contact info in Messages, tap Contact.
- Tap to call that person or to use FaceTime
- Tap to see the person’s complete contact info
If they're not already a contact, you can tap Create New Contact to add them.
Messages - Learn more about iOS 7 and iPhone - Apple Support
http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= Messages#TI136
Thanks,
Matt M.

How to add a button to every group's element in a presentation?

Hi all!
I am still a newbie with BPM. Just done the tutorial, a 2-day course and some experiments on my own. So, please, forgive my lack of knowledge.
I need to add a button to every element of a group in a presentation. You can think this group as a list of invoices and the button linked to another presentation where you will be able to edit attributes of the single invoice. Completed this procedure you could come back to the first presentation where the whole list will be visible. And so on, until the user clicks the end button to confirm changes and exit the screenflow.
I would like to use only simple presentation (not jsp). I have read about developers who create complex presentation, so I hope there are no limits about this issue.
Thank you all!
Luca

There's no easy way to achieve this. You'll have to provide a RootPaneUI delegate with a custom title pane implementation. There, you'll have to provide a custom layout to position your button. In addition, this approach will not work on look-and-feels that do not support decorated mode (such as Windows or GTK) since under such LAFs the title pane always comes from the OS.

Regarding : How to add a user to portal group with the help of webdynpro .

Hii ,
I am working on an application in which with the help of an action( Button) we r adding a user in Ztable in R/3 , as well as group in portal.
The user r successfully creating in Ztable but from portal side No user is assigned to Portal group.
I need coding solution for " How to add a user to portal group with help of webdynpro"
Any usefull link will also do.
Pls anyone have any solution ??
Thnks in advance.
Rewards r waiting for u .

Hi,
Use UME api to add user to portal group.
Using UME API:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d562b7-1405-2a10-dfa3-b03148a9bd19
Regards,
Naga

How to add a dba group in Unix after Installation

I need help in figuring out how to add a dba group, which one would do prior to installation, but how can one do it after installation?
I need to have a group that will have people allowed to start and stop oracle. Is this possible to modify to do after installation?
Please help... Thank you.

Thanks for the advice. I am looking in my config.s file and this is what i see..
     .section     ".text",#alloc,#execinstr
/* 0x0000     7 */          .file     "x.c"
     .section     ".data",#alloc,#write
/* 0x0000     9 */          .global     ss_dba_grp
/* 0x0000     10 */          .align     8
     .global ss_dba_grp
ss_dba_grp:
/* 0x0000     17 */          .align     8
/* 0x0000     18 */          .xword     (.L12+0)
/* 0x0004     24 */          .align     8
/* 0x0004     25 */          .xword     (.L13+0)
/* 0x0008     26 */          .type     ss_dba_grp,#object
/* 0x0008     27 */          .size     ss_dba_grp,16
     .section     ".rodata1",#alloc
/* 0x0008     13 */          .align     8
.L12:
/* 0x0008     15 */          .ascii     "dba\0"
/* 0x0014     20 */          .align     8
.L13:
/* 0x0014     22 */          .ascii     "dba\0"
What should i change?

How to add function group to the authorization object S_RFC ?

Hi All,
Can you please tell you how to add the function group FG_DIAGLS_DATA_ENRICHMENT to the authorization object
S_RFC?
In solman_setup under basis configuration when I execute the step "SetupDPC/DCC Web Service URL" its getting failed because of the
following error which i found it in the agent log
"java.rmi.RemoteException:RfcExecutionException; nested exception is:
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An
exceptionoccured during the execution of the function
'FM_DIAGLS_PUSH_PHYSICAL_HOST': RFC_NO_AUTHORITY >
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException:An exception
occured during the execution of the function
'FM_DIAGLS_PUSH_PHYSICAL_HOST': RFC_NO_AUTHORITY >
com.sap.mw.jco.JCO$Exception:No RFC authorization for function module
FM_DIAGLS_PUSH_PHYSICAL_HOST. <Mid"
Thanks,
Satheesh E

Hi,
Please follow below steps:
1) Go to SE01
2) Click on create New workbench request and give desc once popup appears, Click Ok
3) Now open the trasport in edit mode
4) Add
Program ID - R3TR
Object Type - FUGR
Object name - Name of the Function group
>note that if you tranport Function group all the latest Function modules in function group along
>with screens will be included in the transport.
Regards
Shital
Formatted by: Vijay Babu Dudla on Apr 25, 2009 5:08 AM

How to add group managers who will be able to add members?

Similar Messages

Maybe you are looking for