How to add HBR plugin in EAS console

Hi All,
The Business rule menu is missing the enterprise view tree. I figured out we can add the plugins through tools --> configure components.
For HBR plugin, i need to add com.hyperion.hbr.easuiplugin. But i am not sure which .jar file contains this and what is the location of the file.
Any help would be appreciated.
Thanks,
Amogh

Rahul answered this question for me: Re: EAS does not show Business Rules node
Regards,
Cameron Lackpour

Similar Messages

  • Cannot open/add essbase server in EAS console in SSL mode

    Hello Gurus,
    I have implemented SSL in EPM which terminates at the web server but it seems that there is some issue with the Essbase server.Whenever I try to add essbase server into EAS console in a secure mode it shows the following in the Message panel of EAS console
    Error: 1040142: NZERROR: nzos_Handshake failed(29024)
    Checked Essbase logs but it has the same error mentioned in it. I am not sure where to proceed from here.
    Any help will be appreciated. Thanks.

    I think I might have the answer, EAS will be using the essbase RTC which has its own wallet in <MIDDLEWARE_HOME>\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin\wallet
    Now you can either update the cwallet.sso in that directory or add a essbase.cfg file in <MIDDLEWARE_HOME>\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin
    wiith the location of the wallet using the config setting
    WalletPath <enter_full_path_to_wallet>
    I also added the certificate to the cacerts in <MIDDLEWARE_HOME>\jdk160_21\jre\lib\security
    Restart services and give it a go, works for me.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to add Phonegap plugins into Thym-based projects?

    Finally got Eclipse working with Phonegap/cordova once I found Thym. However, now I'm not sure how to plugins into the project. Adding them from the CLI as usual does not seem to work.
    Any advice on this? Thanks!

    I installed Thym in my Eclipse Luna.
    Then you can create projects by selecting Cordova platform and plugins when you create the project.
    file> new> other> mobile> Hybrid ...
    but I have not found how to add plugins later.
    Now I installed JBoss Developer Studio and when you click on the Cordova project with right mouse button displays "Install Plugin Cordova".

  • [CS3] How to add via plugin some variable into javascript object model?

    Otherwords i need access to some plugin variable from javascript.

    The BPI plugin source is pretty well documented via comments. If you don't like page items, search the .fr for any reference to "page item" and "PageItem", then remove those references.
    Depending on your specific purposes, also eliminate the persistent BPIDataPersist and related, or anything with "Panel" in it. This should give you a very minimum plugin.
    If you don't want a structure that behaves like a "prefs", remove kBPIPrefsScriptProviderBoss and all related.
    To add a property on a another boss rather than on page items, just replace kPageItemObjectScriptElement in the kBPIScriptProviderBoss of the VersionedScriptElementInfo, e.g. with kApplicationObjectScriptElement.
    app.documents is probably not what you want to follow, because that is a collection rather than an array so you would be implementing an own object type.
    Of course, keep a copy of your intermediate steps and whenever too much breaks, retry. That's how we all started ...
    Dirk

  • I have a download of Social Monkee, but need to know how to add this plugin to Firefox.

    Download the plug in from Social Monkee's site but not sure how to load since it is not part of the Firefox listing.

    ''The information is this post is not applicable to Firefox 29 and newer. See: [https://support.mozilla.org/questions/1041446#answer-677749]''
    This all changed in Firefox 29...
    Previously, I think the custom toolbars were added in the localstore.rdf file. It's sort of a nightmare to edit by hand, but if having those on the menu really annoys you, I'm not sure there is a good alternative.
    To locate the file, open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button. This should launch a new window listing your currently active Firefox settings files.
    Leaving that window open, switch back to Firefox and Exit, either:
    * "3-bar" menu button > "power" button
    * (menu bar) File > Exit
    Pause while Firefox finishes its cleanup, then right-click > Copy the '''localstore.rdf''' file and right-click > Paste somewhere like your My Documents folder so you have a backup copy "just in case".
    The rdf file is plain text, but is hard to read in Notepad. Ideally you would have some programs that color-codes XML files. Not sure what is best for Windows XP. Anyway, you would be looking for lines similar to the following:
    &lt;RDF:Description RDF:about="chrome://browser/content/browser.xul#'''spacer'''" ... />
    The exact contents of the tag would depend on whether there were any controls on the bar, etc. I don't think I have any examples in my own localstore.rdf file.
    I think it's fairly safe to delete the unwanted bars from localstore.rdf, but you might wait for another volunteer to chime in.

  • How can add raw plugins to photoshop cs

    any answer

    If you mean a ".8li" or ".plugin" file instead of ".zxp" file, you could copy it to "<PS installation folder>/Plug-ins" folder.

  • Cannot add a New Essbase server into the EAS Console

    Hi can someone assist me...........
    I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
    I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
    I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
    I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
    So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

    Hi can someone assist me...........
    I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
    I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
    I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
    I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
    So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

  • In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page (I turn Shockwave Flash on only to see videos - having it off prevents screen freezing - and so I want it stay at the top of the list)?

    In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page? I turn Shockwave Flash on only when I want to watch a video and then turn it off to prevent screen freezing, and so I want it to PUT it and KEEP it at the top of the list.

    Hit Ctrl+0 (That's a zero, by the way). I'm not sure if it will work, but hey, that's the first thing I would try.

  • How to add dll file in plugin

    Hi everybody,
    I have a short question concerning the plug-in.
    I created a plug-in  using visual studio 2005 for Adobe effect cs4
    but i want to add dll on that plugin so,how to add dll in that plugin
    please help me!!!!
    Thanks

    Any other dependencies apart from C/C++ runtime, for example cuda
    runtime which you cannot link against statically - you have to copy it
    into After Effect support files, where the executable lives (or in
    windows library directory, but that i would rather not do)!
    Am 19.06.2011 16:15, schrieb shachar carmi:
    to include external dependencies in the plug-in, go to:
    Project Properties -->  C/C++ -->  Code Generation
    and change the "Runtime Library" to "/MT"
    this should make the compiler include the needed code from other DLLs in your code.

  • How to install or attach or add the plugins '.mnu and .vlx' to autocad 2012 or 2013 (mac version). In windows, its 'menuload' and express tools, that helps for it. But this command doesn't exist in mac version. so is there any other command or solution?

    How to install or attach or add the plugins '.mnu and .vlx' to autocad 2012 or 2013 (mac version). In windows, its 'menuload' and express tools, that helps for it. But this command doesn't exist in mac version. so is there any other command or solution?

    Please see autocad support at autodesk.com
    http://docs.autodesk.com/ACD/2014/ENU/index.html?url=files/GUID-5E50A846-C80B-4F FD-8DD3-C20B22098008.htm,topicNumber=d30e484012

  • How do you add existing plugins to a new Photoshop cc installation?

    How do you add existing plugins to a new Photoshop cc installation?

    If it's CC or CC 2014, you check with your plugin makers and download their latest installer. Never attempt to move plugins from an old to a new install.
    Gene

  • How to add weblogic portal related plugins to my IDE

    Hi friends,
    I am new to weblogic portal 10.3,How to add wlp 10.3. related functionality to my Eclipse IDE .Can you please provide the suitable plugins to work with wlportal 10.3.
    thanks,
    krishna kolla.

    Hi Pramod,
    You can try this workaround for this:
    Create a DC of type ext library (If already done, then put a Build Time Dependency. Also add all the Jar Files to a Assembly and Complation Public part)
    Create a J2EE Application project and define the dependency on the Ext Lib project *Assembly
    An ear gets generated that you can deploy on your server.
    You need to define a Runtime dependency to this J2EE project in your project where you want to use the jar files.
    This way you can proceed with the development and later on chage the reference when you get the proper method to do so.
    Hope this helps!!
    Cheers,
    Arafat

  • How to add a new spotcolor channel in a filter plugin

    How to add a new spotcolor channel in a filter plugin and how to make it aktive?

    Re: An Entity/View Object attributes default values from other view object should help

  • How to add print server in server manager console

    Hello,
    I want to know how can I add print server in server manger console (not print management console)? I want to add another print server in server manager. I can add it by print management, but dont know how to add it in server manager. In server manager there
    is only local server in Print Services.

    Hi Amin2234,
    As far as I know you can There are two primary tools that you can use to administer a Windows print server:
    •Server Manager
    •Print Management
    Print Management provides a single interface that administrators can use to efficiently administer multiple printers and print servers and is the primary focus of this document.
    Print Management provides a central administration point for sharing printers on a network and managing print server and network printer tasks.
    The related KB:
    Print Management
    http://technet.microsoft.com/en-us/library/cc766474.aspx
    Add or Remove Print Servers
    http://technet.microsoft.com/en-us/library/cc755141.aspx
    Overview of Print Management
    http://technet.microsoft.com/en-us/library/cc731857.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    Hello,
    Thanks for your answer, but I asked how to add print server in "Server Manager" consol, not by print management.
    My server manager has currently 1 print server added, while I have 2 print server added in print management. I want to add the second print server in server manager console too.

  • How to add plugin into Edit preferences?

    hi,
    i want to show my plugin into Edit>preferences instead of extension.i added my plugin into menu>Edit>Preferences but it iis not added into preferences dialogbox where other plugin like general,type.
    how can i add my panel/plugin into preferences.

    You can only add C++ plugins to the prefs dialog.

Maybe you are looking for