How to add Hints in the Metadata(RPD).
Hi Friends,
Need to use the Hints in the rpd.So please if anything pointers are there share with me.
Am using the Hints ORDERED on the object in the physical layer. My confusion here is this hint will visible in the Physical sql or not.
Should i need to use this /*+ORDERED*/ hint in this format in the physical layer.
Please share your thoughts on this.
Thanks,
Govardhana
Hi,
Refer below:
http://gerardnico.com/wiki/dat/obiee/hint
http://gerardnico.com/wiki/database/oracle/hints
http://docs.oracle.com/cd/B19306_01/server.102/b14211/hintsref.htm
Normally we use HINTS to get better performance of query run time similarly in OBIEE you can have the same hints in physical layer supported by DATABASE(ORACLE)
By default database query optimizer selects its most optimized path of query execution.
But you can use hint instructions placed within a SQL statement for telling the database query optimizer the most efficient way to execute the statement.
Supposing consider the PL/SQL data loading procedures using the following HINTS for performance. They are /*+ APPEND NOLOGGING PARALLEL */
■Append: - When “Append” hint is used in a PL/SQL INSERT statement, Oracle will perform a DIRECT Load of data and hence will be fast. It's known as direct path insert
■NoLogging : - When "NoLogging" hint is provided, Oracle will not perform any logging operations for this statement
■Parallel: - Oracle will make use of Parallel Loading when “Parallel” hint is used in SQL Statement.
Refer
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/b31770.pdf
Page 106 for more good understanding
Regards
MuRam
Similar Messages
-
How to add spaces at the end of record
Hi Friends,
i am creating a file which contains more than 100 records.
In ABAP i have internal table with on field(135) type c.
some time record have length 120, somtime 130 its vary on each record.
but i would like to add space at the end of each record till 135 length.
Can you please help me how to add speace at the end of record.
regards
MalikSo why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop. -
How to add marker on the clip?
Hi!!!
Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
Thanks!!!Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
>
>
Re: How to add marker on the clip?
created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion -
How to add request in the buffer
Hii All,
How to add request in the buffer in bulk.
i am using following command.
tp addtobuffer requestno <sid>
but after doing it is giving me the following error
C:\usr\sap\trans\bin>tp addtobuffer BWDK900161 BT1
^CThis is tp version 340.07 (release 640, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Pls help.
Regards,
Viren.Hi Rolf,
thax for your reply.
But still it is not working it shows following message.
C:\usr\sap\trans\bin>tp addtobuffer BWDK900051 BT1 pf=c\usr\sap\trans\bin\TP_DOM
AIN_BT1.PFL
This is tp version 340.07 (release 640, unicode enabled)
E-c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Regards,
Viren. -
How to add filter in the dist. model
hi,
how to add filter in the dist. model
thanks
RubanHi,
Please try this.
1. Go to transaction BD64.
2. Click on Change button.
3. Expand the corresponding model view.
4. Expand the corresponding message type (i.e MATMAS).
5. Place the cursor to 'No filter set' and double click.
6. Click on Create Filter Group.
7. Add your filter from here ...
8. Once done, save the model view.
For more information, please check this link.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Regards,
Ferry Lianto -
How to add Acrobat to the Microsoft Office ribbon?
how to add Acrobat to the Microsoft Office ribbon?
Hi ebender888,
What versions of Acrobat and Office do you have? See if this post helps: https://answers.acrobatusers.com/Why-Acrobat-PDFmaker-Office-COM-Addin-tab-disappearnig-Wo rd-Office-2013-q152959.aspx
If not, let us know what software you're using, and we'll try to get you pointed in the right direction.
Best,
Sara -
HT5654 how to add videos to the ipad using the latest version of itunes
how to add videos to the ipad using the latest version of itunes ?
Hello zaraa90,
After reviewing your post, I have located an article that can help with syncing content. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Sync your iPhone, iPad and iPod with iTunes using USB
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
How to add Video on the OAF page like youtube ?
Any one know how to add Video on the page?
If you are getting HTML code from one of these slideshow.com places, you can add this code to your iWeb pages with a little bit of work. Two things to keep in mind...1. No way to do this via iWeb directly, so it involves editing the published html files, and 2. Because iWeb republishes the html files whenever you update the your webpage, you will lose your changes and have to redo them to add your slideshows back.
The general directions are as follows...
1. Decide where you want your slideshow and know exactly what dimensions you need.
2. Insert a text box onto your page and adjust its size to exactly your dimensions.
3. Type in some uniquely identifiable text like, "SLIDESHOWHERE" without changing the font or anything else...just type it in.
4. Publish your page with iWeb.
5. Find the html file associated with your published page (either on your iDisk or in a folder depending on how you published) and open it in any text editor (like Microsoft Word, or Textedit, or anything). You may need to set your text editor to "ignore rich text" or to "show HTML source".
6. Scroll through the html file and locate your placeholder text, e.g. "SLIDESHOWHERE".
7. Replace the placeholder text with your html code and save your page.
That's it. You should see your slideshow element show up in Safari where you placed the text box in iWeb! -
Reg:How to add fields to the scripts in detail
How to add fields to the scripts in detail.
Plz give me one example help me out.Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
LIFNR TYPE LFA1-LIFNR,
NAME1 TYPE LFA1-NAME1,
LAND1 TYPE LFA1-LAND1,
ORT01 TYPE ORT01,
REGIO TYPE REGIO,
END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
EBELN TYPE EKKO-EBELN,
BUKRS TYPE EKKO-BUKRS,
AEDAT TYPE EKKO-AEDAT,
ERNAM TYPE EKKO-ERNAM,
BSTYP TYPE EKKO-BSTYP,
LIFNR TYPE EKKO-LIFNR,
END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
LOEKZ TYPE EKPO-LOEKZ,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
NETWR TYPE EKPO-NETWR,
END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
WA_EKKO TYPE ST_EKKO,
IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
WA_EKPO TYPE ST_EKPO,
IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
TOTAL = TOTAL + WA_EKPO-NETWR.
CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'PRINTER'
FORM = 'Z_50886_VENDOR'
LANGUAGE = SY-LANGU
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'HEAD'
WINDOW = 'HEADER'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'VENDOR'
WINDOW = 'ADDRESS'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
WINDOW = 'TOTAL'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
BUKRS
AEDAT
ERNAM
BSTYP
LIFNR
FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM. " get_data_from_ekko
*& Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
SELECT LIFNR
NAME1
LAND1
ORT01
REGIO
FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM. " get_data_from_lfa1
*& Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
SELECT EBELN
EBELP
LOEKZ
AEDAT
MATNR
NETWR
FROM EKPO INTO TABLE IT_EKPO
WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM. " get_data_from_ekpo -
How to add reminders on the new ios6? I don't have the plus (+) on the upper right as seen on ios5 to add reminder.
Also, tap the lines at the top left and create a new list, that should give you the + back.
-
How to add subpartitions to the existing subpartition template
Hi All,
My Question is ,how to add Subpartition to the exiting subpartition template. e
like i have created a table with subpartition template with with 5 subpartitions like
subpartiton one_1 value (121)
subpartition two_2 value(122)
and now i one to add one more subpartitin to the existing subpartition template(Like modify the existing subpartition templete).
subpartition three_3 value(123)
Could any suggest me.
Thanks
Sree>
My Question is ,how to add Subpartition to the exiting subpartition template.
>
Follow the example in the section for 'Modifying a Subpartition Template' in the VLDB and Partitioning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1007904
>
You can modify a subpartition template of a composite partitioned table by replacing it with a new subpartition template. Any subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS) now use the new subpartition template. Existing subpartitions remain unchanged.
If you modify a subpartition template of an interval-* composite partitioned table, then interval partitions that have not yet been created use the new subpartition template.
Use the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:
ALTER TABLE emp_sub_template
SET SUBPARTITION TEMPLATE
(SUBPARTITION e TABLESPACE ts1,
SUBPARTITION f TABLESPACE ts2,
SUBPARTITION g TABLESPACE ts3,
SUBPARTITION h TABLESPACE ts4 -
How to add text to the summary
I wanted to add a text to my summ total on my report.
The forum told me to add a boiler plate text item. However this item displays on every page.. I want it to only display where the summary is. I tried using anchors but it will not attach to the summary item.. Help
howardHi Howard,
I guess you are referring to this post:
How do i add text to the summary
First make sure that you place the boilerplate exactly where you had (or currently have) the summary column, ie, in the SAME frame or repeating frame.
Second, open the property inspector for your summary column. Find the properties "Print Object On" and "Base Printing on", and make sure that both of these are the same for your boilerpate as for your summary column.
Navneet. -
Simple question - How do I add photos to the body of my emails . But instead of the answer - Found 1000 results for How do I add photos to my emails for Thunderbird. There are answers that don't apply at all to the question in anyway. Why does it have to be so hard to get a simple answer to a simple question?
Thunderbird is acting much like Microsoft, the every reason I dumping MS Live Mail.First of all, much help for Thunderbird refers to menus which may not be visible. It would help you and us if you have your menus and toolbars visible.
http://chrisramsden.vfast.co.uk/13_Menus_in_Thunderbird.html
So, open a write window. Enable its menu and toolbar(s).
Now do you see an "Insert" option?
If not, you may be set to compose in plain text, which does not support embedded images.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|{select account}|Composition & Addressing''' and ensure "Compose messages in HTML format" is ticked. If it wasn't already ticked, go back to composing a message. Any better now?
Once you have HTML composition mode going, you can use '''Insert|Image''' or various permutations of copy-and-paste and drag-and-drop into your message body.
A manual, of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/ -
How to add languages to the "Correspondence language" in People form
Hi,
Can anyone help me how we can add languages to the "Correspondence language"
Navigation will be as follows
People form > Other tab
ThanksHi,
The values in that field come from FND_LANGUAGES_VL view. The data in this table is seeded by Oracle and you are not supposed to add/delete/update records in this table.
In case the languages that you want are not available, you may create an attribute in Person DFF to capture correspondence language and the list may show values from a custom value set.
Hope this helps.
Regards,
Manish K. -
How to add -Select- as the first value in dropdownbox?
Hi All,
I am having a dropdownbox with the set of values. I need to add -SELECT- as the first and default value. Please do advise how to achieve this.
Code and screenshot below.
var oModel = new sap.ui.model.odata.ODataModel("../../services/admin/typesTable.xsodata/", false);
var oSort = new sap.ui.model.Sorter("ID", false);
var lblType = new sap.ui.commons.Label();
lblType.setText("Type");
var ddbType = new sap.ui.commons.DropdownBox();
ddbType.setRequired(true);
var oItemTemplate = new sap.ui.core.ListItem();
oItemTemplate.bindProperty("text", "NAME");
oItemTemplate.bindProperty("key", "ID");
ddbType.setModel(oModel);
ddbType.bindItems("/TYPES", oItemTemplate, oSort);
lblType.setLabelFor(ddbType);
oChildLayout.createRow(lblType, ddbType);
Thanks in advance
AravindhHi,
Refer this discussion on exact requirement empty/"all" entry in DropdownBox with OData model - cleanest solution
Regards,
Chandra
Maybe you are looking for
-
Changed Dept Dimension Hierarchy, erased all historical data!
Yesterday I made a change to our Department dimension. I changed a base level member (034) to be a "child" to another base-level member (050). I changed the Parent property for 034 to 050 and didn't make any changes to the parent of 050, then saved a
-
CM upgrade from 6.1.1 to 7.0(2)
Hello, I am going to be upgrading our CM this weekend and I would like to know if it is possible to run the upgrade today on the Pub and Sub and wait to reload both of them on Saturday or Sunday. When the reload happens, the Pub will be done first, t
-
Flash Video Not Playing in Captivate Project
I've put in a flv video at the beginning of a Captivate Project. When I press F4 from within the project, it works fine - flash video slide works, transitions into Captivate build, etc. However, when I publish the file as a Flash Project and then tr
-
Hi, I have an original ipad with ios 4. I updated it to ios 5.1.1. Now I want to update to 6, but when I go in software updates it says that ios 5.1.1 has no updates and doesn't give the option to update to 6. Is the original ipad not able to upda
-
Can anyone from SAP answer this question?
How does an individual go about obtaining training and/or materials in BOFC in English given that no such classes are scheduled (and are not likely to in the near future, given SAP's push for the other product, BPC) in the US? Thanks. Matt Edited by: