How to add include in MV45AFZZ ??

Hi,
In ECC 6.0, I need to add code in the user exit
FORM USEREXIT_SAVE_DOCUMENT
ENDFORM.
How do I do that ? Should I have to implement the implicit enhancement point present at this spot in the include MV45AFZZ ? Or any other way ?
I just need to add an INCLUDE statement inside this FORM. Can anyone give the exact steps ?
thks

Hello,
If this form is not already active, you need to create a project and add the enhancement to the project and activate. Please note that unless you assign the enhancement and activate the project, the code will not take effect.
You can add the include statement within this enhancement.
Double click on the include statement and the system will take you to the editor where you can put your code for the include.
Whenever the user clicks the save button, your code will hit, you can also check by having a break point in the code you put in the include.
cheers,
Sushil Joshi

Similar Messages

How to add fragment in jsf page using include tag in jdeveloper

Hi all
Can you tell me wat is syntax of using include tag .or how to add fragment in jsf page ..
Edited by: 947228 on Jul 18, 2012 5:01 AM

Hi,
Why do you want to do that?
Check [url https://blogs.oracle.com/jheadstart/entry/avoid_use_of_jspinclude_where]this out before proceeding further.
Btw, always mention your JDev version, clear usecase to get help.
-Arun

How do I include 'Edge Web Fonts' into Edge Animate?

How do I include 'Edge Web Fonts' (not Google Web Fonts) into Edge Animate?

Have you tried to use google fonts? I have used them and they work for me.
When you add your font for example:
Copy paste:
<link href='http://fonts.googleapis.com/css?family=Finger+Paint' rel='stylesheet' type='text/css'>
and then for font family.
'Finger Paint', cursive;
then select addfont on the addfont screen

How to add additional tab or fields in ME21n

Hi all.
I included some fields in EKKO table.
I want to add these fields in ME21n, ME22n, ME23n Header screens.
How to add?
I can't find screen exit and user exit.
Plz, let me know how to do in detail.
Regards,
nam
Message was edited by:
Kil Nam Kim

Hi
It is very much possible. Please discuss with your development team with the exact requirements. They should be able to do it with screen exits.
Reward if this helps.

How to add new validation for the iProcurement web page?

Hi,
I am very new to OA Framework. Can you experts give me some guidance on how to proceed with the following customization?
My requirement is in iprocurement when you open a new cart and check out on "ICX_POR_SHOPPING_CART" there is a Project Field and reference to Charge account. If the users go to charge account (ICX_POR_CHECKOUT_SUMMARY) and enter the segment values ( which includes project segment) and enters a value in project segment other than '000000' with out entering the Project Field on "ICX_POR_SHOPPING_CART" the page should give error.
Please give me some suggestions on how to proceed.
Thanks
Vish

I need the client side validation. By saying server side validation if you mean writing a triger on tables to validate then I am thinking to take that option as last resort.
Can you please tell me what is PPR ( Is it personalization?) stands for.? In my case the Charge Account is DFF.
Can you direct me to any documentation on how to add custom javascript to achieve my objective?.
Thanks for your Help.
Regards

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

How to add depreciation and interest in product costing?

how to add depreciation and interest in standard cost estimate and actual costing in product costing ?

Hi,
WHy the admin and sales overhead will be deited to cost of product. The cost of product should include only the factory related direct cost and overhead cost .. not the sales and admin ovehead. exp. for those treat them as period expense and pass on the same to COPa and there those can be analysed there..
I hope i am clear..
Regards
Prabhat

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to add a certificate to IIS global "Server Certificates" list using PowerShell?

Hi, been surfing the web for an example on how to add a certificate to the "global" IIS "Server Certificates" list using PowerShell but to no luck. I already have code in place on how to tie / associate a specific website with a specific cert but not how
to add the new .cer file using the "Complete Certificate Request..." wizard using PowerShell.... I dont expect the final code to become published but if someone had an idea on howto integrate / get an entry point on where to interact between the "Server Certificate"
list in IIS and POSH I would be super happy! :|
I am runnign IIS on a Windows 2008R2 x64 Standard Edition if that helps..... of course, I would saddle for an CLI if there is no other way, but POSH is of course the way to go! :)
Thanks for the help in advance guys, take care!
br4tt3

Hi and thanks for the suggestions!
Although it comes close, the suggested code example points on howto import / incorporate .pfx files - I am getting fed by .cer files which I need to add into the IIS console using POSH.
I tried explore the IIS.CertObj object but was not able to work out if this one could be used for importing / adding .cer files into IIS! However, launching the following command from a POSH console with Import-Module Webadministration already
loaded into that shell;
$certMgr = New-Object -ComObject IIS.CertObj returns the following error message:
New-Object : Cannot load COM type IIS.CertObj
From an IIS perspective I have the following components installed;
[X] Web Server (IIS)                                    Web-Server
    [X] Web Server                                      Web-WebServer
        [ ] Common HTTP Features                        Web-Common-Http
            [ ] Static Content                          Web-Static-Content
            [ ] Default Document                        Web-Default-Doc
            [ ] Directory Browsing                      Web-Dir-Browsing
            [ ] HTTP Errors                             Web-Http-Errors
            [ ] HTTP Redirection                        Web-Http-Redirect
            [ ] WebDAV Publishing                       Web-DAV-Publishing
        [X] Application Development                     Web-App-Dev
            [ ] ASP.NET
Web-Asp-Net
            [X] .NET Extensibility                      Web-Net-Ext
            [ ] ASP
Web-ASP
            [ ] CGI
Web-CGI
            [ ] ISAPI Extensions                        Web-ISAPI-Ext
            [ ] ISAPI Filters                           Web-ISAPI-Filter
            [ ] Server Side Includes                    Web-Includes
        [ ] Health and Diagnostics                      Web-Health
            [ ] HTTP Logging                            Web-Http-Logging
            [ ] Logging Tools                           Web-Log-Libraries
            [ ] Request Monitor                         Web-Request-Monitor
            [ ] Tracing
Web-Http-Tracing
            [ ] Custom Logging                          Web-Custom-Logging
            [ ] ODBC Logging                            Web-ODBC-Logging
        [X] Security
Web-Security
            [ ] Basic Authentication                    Web-Basic-Auth
            [ ] Windows Authentication                  Web-Windows-Auth
            [ ] Digest Authentication                   Web-Digest-Auth
            [ ] Client Certificate Mapping Authentic... Web-Client-Auth
            [ ] IIS Client Certificate Mapping Authe... Web-Cert-Auth
            [ ] URL Authorization                       Web-Url-Auth
            [X] Request Filtering                       Web-Filtering
            [ ] IP and Domain Restrictions              Web-IP-Security
        [ ] Performance                                 Web-Performance
            [ ] Static Content Compression              Web-Stat-Compression
            [ ] Dynamic Content Compression             Web-Dyn-Compression
    [X] Management Tools                                Web-Mgmt-Tools
        [X] IIS Management Console                      Web-Mgmt-Console
        [X] IIS Management Scripts and Tools            Web-Scripting-Tools
        [ ] Management Service                          Web-Mgmt-Service
        [ ] IIS 6 Management Compatibility              Web-Mgmt-Compat
            [ ] IIS 6 Metabase Compatibility            Web-Metabase
            [ ] IIS 6 WMI Compatibility                 Web-WMI
            [ ] IIS 6 Scripting Tools                   Web-Lgcy-Scripting
            [ ] IIS 6 Management Console                Web-Lgcy-Mgmt-Console
    [X] FTP Server                                      Web-Ftp-Server
        [X] FTP Service                                 Web-Ftp-Service
        [X] FTP Extensibility                           Web-Ftp-Ext
    [ ] IIS Hostable Web Core                           Web-WHC
More or less the one thing that I am trying to get up and running is an automated FTPS solution - I just use the IIS console to be able to troubleshoot / compare how things scripted from POSH interacts in the MMC representation. The error I am getting
might be that I am lacking some IIS components to be in place to be able to automate some parts of the IIS - as suggested by the IIS.CertObj object listed in the example..... I will get back if I can track down which component needs to be added to be
able to reference the IIS.CertObj object.
Br4tt3 signing out...
br4tt3

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

How to add a new filter in an existing web service method (BIWS - WEBI document)

Hello Experts, we have 7 web service query's connected to a dashboard. Basically it is one WSDL URL and 7 Get Methods...Web service queries are BIWS (via WEBI document instance). There are filters setup for each of these web service methods.
Recently there was a request to add 2 new fields to the webi document and also the 2 fields need to be included as filters in the 7 methods. I know there is an option to edit the method, but when i edit the method, i cannot find the 2 new fields in list to set as filters.Can anybody help me understand how to add filters to an existiing web service method? I do not want to delete the method and republish the block as web service.
Any help will be great and points rewarded.
Thank you
Ann

Hi Ann,
The reason you are not able to see any of the new columns as a option to select in your web service block is because when you have published that block, they were not present. Add these two new objects in your block and publish it again. You will be prompted for duplication content. Select the highlighted block for duplicate and now you can see the new added objects in the filter option. Update and this will overwrite your published block. Please note, web services do appear to behave weirdly when used with dashboards so I request you to please try it in a separate test report first.
Hope that helps.
Regards,
Tanisha

How to add a new filter in existing BIWS (WEBI) for dashboard consumption

Hello Experts, we have 7 web service query's connected to a dashboard. Basically it is one WSDL URL and 7 Get Methods...Web service queries are BIWS (via WEBI document instance). There are filters setup for each of these web service methods.
Recently there was a request to add 2 new fields to the webi document and also the 2 fields need to be included as filters in the 7 methods. I know there is an option to edit the method, but when i edit the method, i cannot find the 2 new fields in list to set as filters.Can anybody help me understand how to add filters to an existiing web service method? I do not want to delete the method and republish the block as web service.
Any help will be great and points rewarded.
Thank you
Ann

Hi Ann,
You can create a new WebServices or modify the document block on which the webservices is published.
Once the block is modified you might be able to see the new objects in the filters.
Thanks,
Amit

HOW TO: Add /manipulate columns for a GridControl

HOW TO: Add /manipulate columns for a GridControl when the columns (attributes) are from different entity objects.
This HOWTO describes the basic steps of using attributes from different entity objects for a GridControl.
One way you can create a GridControl which contain attributes from different entity objects is to create a view object and base it on the entity objects which contain
the desired attributes.
Here are the basic steps:
1.Create a new view object (or use an existing view object) by selecting File>New from the menu, clicking the Business Components tab and double-clicking
on the View Object icon.
2.In the View Object wizard change the name to something meaningful.
3.Select the entity objects you will base your view object on.
4.Nivigate to the attribute screen and select the attributes you would like to include in your view object from each entity object. At this point you can also create
a new attribute by clicking the "New" button. The new attribute can be a concatenation of other attributes, derived from a calculation etc.
5.In the query panel of the View Object wizard, click "Expert mode" and enter a query statement. You write complex queries such as decoding a set of attribute
values.
6.Add your newly to your newly created view object to the application module by double-clicking on the application module in the navigation pane and selecting
your view object from the list.
7.Create a new row set.
8.Bind row set to a query by editing their queryinfo property and selecting your view object and its attributes from the queryInfo pane.
9.Create a GridControl and bind it to the row set by editing the dataItemName property of the GridControl. Since the GridControl is bound at the row set level
all of the related attributes are automatically added.
null

Michael,
Are you intending this as a commercial solution or a work around?
To take an existing equivalent, one would build a view in the database tailored for each grid in an Oracle Forms application. Or a separate query layered over tables for each form/grid in a Delphi or Access application? Even if it is ninety nine percent the same over half a dozen forms/grids?
And now you've added a whole slew of "slightly different" rowSetInfos to maintain.
So if you wanted to add a column that needs to appear everywhere... you've just increased the workload multi-fold?
That would be a management nightmare, wouldn't it? Not to mention yet more performance cost and a slower system?
Hmmmm..... I'm not sure I like where this is headed... someone needs to do some convincing...
null

How to add include in MV45AFZZ ??

Similar Messages

Maybe you are looking for