How to add index to PSA table?

Hi , Experts
as title, I want to add index to PSA table.
my scenario is as below:
We have already initialized 2LIS_03_BF with NOT blcok business user(it's due to our company could not stop R/3 system, anyway), so there are 6 years data in the PSA table, it's very huge records in PSA more than 48 million records, because of we NOT stop R/3 business during initialization, so I have to search some common data between delta records and full records(it's due to this common data contain duplicate record, I need find them and delete the duplicate record and make sure the data is correct).
This is mean The selection is too expensive as it has to look for more than five thousand delta record between more than 48 million full records. fow now I have already tigger this search job use a program, but it's still run for 7 days, still not finished yet, it drive me crazy. so I mean if I can create a index for PSA table, and this action will drive the above compare work more quickly than before? or have any other way for my scenario?
Thanks in advance.
Best Regards,
Bruce

Hi,
See the PSA Name in RSTSODS table and then in SE11 you can create Index. But the load will become slow if you don't drop the Index.
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Surendra Kumar Reddy Koduru

Similar Messages

H how to find if the psa table is included in psa deletion process chain

Hi all
can anybody tell me .
I have a psa table it's technical name is /BIC/B*
h how to find the above psa table is included in psa deletion process chain or not
please help me

Hi
Ope the PC in RSPC1 -->go to planning view of process chain
in left side you will find different types of process types.
under other BW process types folder -->you will find process type "Delete request from PSA"
drag this into your process chain planning view and customize it based on your requirements.
check the below article for step by step procedure
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh

How to add a column in table control

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.

Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards

How to add empty rows in table in smart form

how to add empty rows in table in smart form?
plz help me regarding this
send me ur queries to [email protected]

You will need to add some extra rows to the internal table that your table is displaying. Use a program node to append additional rows with a key but no argument.
Alternaively a template may me more suitable for your requirement than a table.
Finally, please do not include you e-mail address in your question. Your question and the answers provided to it are for the benefit of everyone in the Community.
Regards,
Nick

Asset related question - How to add a record into table ANLC?

Hello experts,
Could anyone tell me how to add a record into table ANLC?
Thanks very much!
Christina.

how you want add?
you want add direct in table???.
Normally if yo post any transaction this table will update.
ex;acquisition;
chandra

How to create indexes using CREATE TABLE statement

Hi,
Can anyone please tell me how to create indexes using CREATE TABLE staement? This point is part SQL Expert exam (1Z0-047) and please guide me to use which books for this particular exam.
Thanks in advance.

Can anyone please tell me how to create indexes using CREATE TABLE staement?e.g. creating a primary key or a unique constraint will generate indexes along with the create table syntax:
SQL> create table t (a integer primary key, b integer unique)
Table created.
SQL> select   index_name, index_type, uniqueness
from   user_indexes
where   table_name = 'T'
INDEX_NAME                     INDEX_TYPE                  UNIQUENES
SYS_C0016575                   NORMAL                      UNIQUE
SYS_C0016574                   NORMAL                      UNIQUE
2 rows selected.

Urgent - How to add buttons to a Table

How to add buttons to a Table and enable them for Mouse Listeners/ Action Listeners

extends the defaultcellrenderer make it return a Jbutton as the component to draw.
class OverCellRendererClass extends DefaultTableCellRenderer {
public Component getTableCellRendererComponent(JTable table,
Object value,
boolean isSelected,
boolean hasFocus,
int row,
int column) {
//put your stuff here to make or get a button
return myButton;
Use something like this to set the renderer for the column :
tb.getColumnModel().getColumn(4).setCellRenderer(new YourCellRendererClass());

How to add wagetype to RT Table?

How to add wagetype to RT Table? Experts Any views on this??

Hi Priya,
Transaction Code: PE02
Menu Path: Human Resources --> Payroll -> Tools --> Maintenance Tools -> Rules
Use ADDWTE* to add the wage type in RT table.
Please refer below link for details and example.
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=72405
Regards,
Supriya

How to add selected values from table(selected using checkbox)to table?

Hi All,
i have created simple page with search panel with table in table i have created one column as check box for selecting.
here what my requirement is i need to do search multiple times to add some roles to from some different categories.here whenever i searched i ll get some roles into table there i ll select some role and i ll click add buttion. whenever i click add i need to add those roles into some other table finally i ll submit added roles.
here i followed one link http://www.oracle.com/technetwork/developer-tools/adf/learnmore/99-checkbox-for-delete-in-table-1539659.pdf
i used same code and able to see selected row in console, as object array how to add these into table.
please help me out
Thanks in advance
siva shankar

Thank you for a quick reply
i used the same thing before i go for table check box concept.here what i observed is when i search i am getting some results i am able to shuttle.but if i search again the shuttle is refreshing with new values even not available list its refreshing selected list. IF dont want refresh selected ones.
my usecase after make some searches I will select some roles from different categories at finally i ll submit.
i hope you understand me requirement. please suggest me is this requirement is possible in shuttle component? if yes please guide me.
thanks
Siva Sankar

How to delete the OLD PSA table altogether?

Hi,
   I am in BI for NW04S and CRM4.0 sp6.0.
   I created a custom data source in the source system and replicated and used transfer rule/Update rule to load an Data store object in the BI system.
   However today , I needed to change some fields of the same data source, and replicated and regenerated the transfer rule, Update rule etc.
   Checked the RSA3 in the source system and the data source is working fine.
    However When I look into the PSA after an attempted data load, I still fine the old PSA table (/BIC/B0000893000) getting populated and not the new one ( /BIC/B0000893001).
when I look into the show data flow on the ODS i can see the PSA table name, and when I serached in SE11 for that table name I have found both these new and old table.
Although the data source is replicated in to BW system properly for some reason the OLD PSA table is still being used.
How can I correct the situation?
Thanks, will reward the points is the problem is solved.
Arun

Dear Arun,
Please check in the table (SE16) RSTSODS.
This table stores the PSA information for all the datasouces.
Enter the datasource in question followed by * in the field 'ODSNAME' (for eg. 2LIS_02_SCL*).
This will show you all PSA tables for that Datasource.
The fields DATETO and DATEFROM will tell you, which PSA table is currently in use.
By the way, a new PSA table should be generated only if there is a change in Transfer Structure.
Hope it helps.
thanks,
amol

How to shift index in a table

Hey,
My program collects 5 pieces of information per object from user. Some of the input data is in String format, rest are Integers. I create an object from this data and put in into a table. My table contains max 10 pieces of information.
I have editing options for this data, which are erase one or all pieces, or modify a piece. I erase data by simply setting the index to null. Erasing one piece is incomplete atm, here's why:
Say I have 5 pieces in table, and I erase the one with index of 0. I can't print my information because the table starts with a null value:
int index = 0;
if (table[index] != null) { System.out.println(data);} ..
My guess is that I can solve this problem by decreasing the index of pieces greater than the modified one by 1. I can imagine that I'll be using for loop here. This is where I run out of ideas: is it possible to just modify the index, or do I have to rewrite the data again?
Any help is appreciated,
br,
nomi

I think using for loop would be the easiest way (?).
I'm filling the table as simply as:
items[index] = new table (value, quality..);Using LinkedList seems a bit far fetched for me. But
again, if I am to use for loop, I think I would have
to rewrite the data to appropriate index?Why is a List far fetched? Type of List you pick depends on how you use the list (whether you want RandomAccess, etc.).
List items = new ArrayList(); // or LinkedList
items.remove(index); // Remove the item at index.To use an array:
Table [] items = new Table[20]; // whatever size
items[index] = new Table(value, quality, ...);
// To remove:
System.arraycopy(items, index, items, index+1, items.length-(index+1));
items[items.length-1] = null;

REG: How to add elements onto htmlb table cell.. URGENT PLZ HELP

Hi all,
I have created a htmlb table. And the jsp code is as follows
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.linde.myaccounts.util.TableBean" />
<hbj:content id="myContext">
<hbj:page title="PageTitle">
   <hbj:form id="myFormId" >
   <hbj:tableView id="myTableView1"
                      model="myBean.model"
                      design="ALTERNATING"
                      headerVisible="false"
                      footerVisible="false"
                      fillUpEmptyRows="true"
                      visibleFirstRow="1"
                      visibleRowCount="5"
</hbj:form>
</hbj:page>
</hbj:content>
                      width="500 px" >
</hbj:tableView>
I have used a table bean by which I am getting the column header names. I have 5 columns, I have to add input field in the first column, checkbox in the second column, leave the third column blank, checkbox in the fourth column and again a input field in the fifth column. I am not understanding on how to add this elements onto the table. Will I add it from the JSP using <hbj:tableViewColumns> tag or I have add them in the bean or in the dynpage. Kindly someone give me the code for this...
This is very urgent..Kindly help...
Thanks in advance,
Priyanka

Hi,
Have you tried looking at the examples that come with the PDK for all of the HTMLB elements? From memory, there should be a small table example or 2 that have different types of columns shown similar to what you want - they have the full source code with them for you to look at.
If you are working in a portal, go to the Java Developer tab and I "think" there should be a tab linking to HTMLB documentation and examples - sorry I can't be more specific but I don't have access to a portal at the moment so am trying to remember.
Gareth.

How to add column comments to table

at the time of creating the table, how to add the comments t columns.

Hi,
I do not see any way in which you can add comment on column while issuing create table command. You can add comment on the column only after the table is created.
Regards
Anurag Tibrewal.

How to add column to compressed table

Hi gurus,
Can any one help me how to add a column to compressed tables
Thanks in advance

The only difference is if added column has default value. In that case:
SQL> create table tbl(id number,val varchar2(10))
2 /
Table created.
SQL> insert into tbl
2 select level,lpad('X',10,'X')
3 from dual
4 connect by level <= 100000
5 /
100000 rows created.
SQL> select bytes
2 from user_segments
3 where segment_name = 'TBL'
4 /
     BYTES
   3145728
SQL> alter table tbl move compress
2 /
Table altered.
SQL> select bytes
2 from user_segments
3 where segment_name = 'TBL'
4 /
     BYTES
   2097152
SQL> alter table tbl add name varchar2(5) default 'NONE'
2 /
alter table tbl add name varchar2(5) default 'NONE'
ERROR at line 1:
ORA-39726: unsupported add/drop column operation on compressed tables
SQL> alter table tbl add name varchar2(5)
2 /
Table altered.
SQL> update tbl set name = 'NONE'
2 /
100000 rows updated.
SQL> commit
2 /
Commit complete.
SQL> select bytes
2 from user_segments
3 where segment_name = 'TBL'
4 /
     BYTES
   7340032
SQL> select compression from user_tables where table_name = 'TBL'
2 /
COMPRESS
ENABLED
SQL> alter table tbl move compress
2 /
Table altered.
SQL> select bytes
2 from user_segments
3 where segment_name = 'TBL'
4 /
     BYTES
   2097152
SQL> SY.

How to create index for particular table in R3

Hi
My load is taking too much time and it leads to process over due error. Does creating indexes on table in r3 side will solve this issue? If so how can we find out on which table does this particular data source depend. I went to maintain extract structure and findout only one table is supplying data for this data source.
Is there any other factors depend to solve this.
Thanks
kk

Hi,
it will depend on the table.... Having an index created will speed up the loading but slow down the insert therefore slowing some process perhaps...
May I ask which table it is? And which fields would you need to index?
Are you sure that bottleneck is located in R/3? Analyze your loading time in the monitor and see if this is really the case.
Otherwise you can create index for a table in Tx SE11; first check if an index is not already created...
hope this helps,
Olivier.

How to add index to PSA table?

Similar Messages

Maybe you are looking for