How to add india localization tax category name in PO interface

Hi All,
I created a PO , without Tax it is working fine i would like to add india localization tax category in that
(Purchase Order Interface), as i checked in PO_lines_all table there is no india localization tax category id, so, if there is any way to add tax category name please tel me the mapping columns and interface table names
regards,
sandy.

Hi Sandy;
What is EBS version?
Please see:
http://download.oracle.com/docs/cd/E18727_01/doc.121/e13657/T477739T502738.htm
Hope it helps
Regard
Helios

Similar Messages

How to modify a wrong tax category in the G/L master

Hi, SAP experts,
1. User using T-code "FS00" to create an operating expense G/L account '6492009', but choose the wrong Tax category( '>'
output tax) on the tab 'Control Data'. It still create a cost element anyway.
2. Then user create/post billing with the entries Dr. AR Cr. 6492009 and a cost center value can be assigned correctly.
3. Now user using T-code "F-02" to post an adjust FI document,but meet the error message 'Account 6492009 requires an
assignment to a CO object'. But because of the wrong Tax category, nowhere we can input the cost center value.
4. Even we try to modify wrong Tax category back, we meet the error message "Changing the tax code not possible,
accoutn has a balance".
Here are my two questions: 1. Why the accounting document posted from the Billing is correct and normal
disregarding the wrong Tax category setup? It shouldn't be posted successfully. 2. How do we change the tax category
in the G/L master from ( '>' output tax) to ( '+' Only output tax allowed) under the balance is not zero, then we can
use T-code "F-02" to post ? Or we have to recreate a new G/L account to replace the current G/L account "6492009"?

1. Why the accounting document posted from the Billing is correct and normal
disregarding the wrong Tax category setup? It shouldn't be posted successfully > First, check your OB40 set up if the output tax account is correctly set up there. The system will still be able to post since the correct tax account assignment is maintained.
2. How do we change the tax category
in the G/L master from ( '>' output tax) to ( '+' Only output tax allowed) under the balance is not zero, then we can
use T-code "F-02" to post ? Or we have to recreate a new G/L account to replace the current G/L account "6492009"? > you need to create a dummy GL account to transfer the balances from this account to make it zero then change the tax category of 6492009.

How to add a custom Attachment Category

Hi All,
When we add Attachement in standard apps pages( by clicking on Add Attachment Button)
The Attachment Page will be opened,
*/oracle/apps/fnd/framework/attachments/webui/FND_ATTACH_UPLOAD_PAGE*
When you add the attachments, you can mention the Category(from message choice, which will be pickup from a VO
(oracle.apps.fnd.server.FndCategoryNameVO)
I would like to add a custom category. How to add it.
I have got an option of Adding a new category from "Application Developer" -> "Attachments" -> "Categories"
I could add the categories, But how to get those newly added categories in a standard apps page,
Eg. /oracle/apps/pon/negotiation/creation/webui/ponDefineHdrPG
Thanks.
With Regards,
Kali.

If you're talking about a playback controller within the rich media annotation (RMA) then you need to write your own widget in Flash or Flex, and then place the video and widget files using the multimedia "Add Flash" tool in Acrobat instead of the "Add Video" tool. Aside from a bunch of proprietary code to handle events, commenting and the API (which you can live without for basic play-pause-scrub applications), video RMAs are just an embedded SWF file containing an FLVPlayback component. The skin and the video file itself are added to the RMA as resource entries. You can build your own version and have it display whatever controls you want, provided you know how to write ActionScript!
If you're talking about a controller that's external to the RMA (e.g. a series of links or buttons elsewhere on the page) then in the past you would use FLV video files and the 'cue points' feature that's built into Acrobat - however Adobe removed the ability to create FLV files in the latest version of CC, so unless you have CS6 or earlier it's a non-starter. Instead you can manually set playback start points using the special "multimedia operations" link action in your PDF - though stopping playback at a defined point is very difficult without FLV cues. For that you're back to writing your own widget.

Integrating India localization taxes and iStore module

Hi Gurus,
We are implementing iStore module in R12. We already have Oracle financials for india setups implemented.
We would like to select the tax category in iStore UI and apply the taxes before booking the order. Is this kind of feature available ? Or any other work aroud solutions , please ?
regards
Sam

Hi,
I've figured out what was wrong.
For some wierd reasons the some of the Triggers relating to India Localisation were disabled.
Once Enabled , the problem was solved.
Only then, the Supplier TDS info in Additional Info window (at site level) was populating.
Thanks
Satya

Health App: how to add a new Results Category

I am keen to add a new Category, my INR and Dose data to the health App Results.
How do I do this...

Dear expert
How to create new cost element category
Regards
Ajeesh.s

How to add Tooltip to the Iview name.

hi all,
     I have to add tooltips to the iview name. When I bring the mouse over the iview
     name a message should display as the tooltip describing the purpose of the
     iview I am not able to found the tooltip option in the iview properties.
     Is there any coding involved for tooltips option or any other options available.
     Please guide me. Looking for the fast reply.
     Thanks in advance.
Ponnusamy.P

hi Deepti,
     When I gave the descripition, tool tip appears in the
     Content Admin -> Portal Content -> (Under the folder I have created the Iview).
     But the tool tips should appear in the iview when I display that iview to the end
     user.How to make that possible.
Thanks
Ponnusamy P

How to add PO date and Vendor name in SAP table MB5S

How do I add PO date field and Vendor name field in SAP table MB5S?? Kindly Help

As a general recommendation just tell the ABAPer your requirement, don't tell him how to do it.... he probably knows, or should know, better ways of doing something then a functional consultant.
And please don't tell people to copy standard reports, most of the times there is a BADI, enhancement, or an implicit enhancement spot available. I'm a consultant who can program ABAP (including complex programs), and I've never had to copy a standard program. Ever.
PS: And no, I didn't have to register the object for modification either.
EDIT: I went to check the program and you have two explicit enhancement spots to use:
ENHANCEMENT-POINT read_data_01 SPOTS es_rm07msal - You use this to fill the extra fields of itab;
ENHANCEMENT-POINT EHP605_RM07MSAL_03 SPOTS ES_RM07MSAL - You use this to enhance the field catalog of the ALV if you are on EhP5, if not create an implicit enhancement on the same stop.
Current SAP allows enhancements everywhere, copying programs should be forbidden.

How to add metadata to store N names?

I need to add a text field to store names of people and can write N names separated each other, but I do not want to use a long text or memo field type.
How can I do this??
Thanks

try option list feature for achieving this.
how long is the name list?

How to add increment number to file name properly

Hi, all:
I have a simple question. As shown in the attached code, I need to add an increment number to file name and save the file. The problem is, if you run the code and put something like ".dat" in the extension name, you will see a blank space between the number and the dot in the file name. What should I do to eliminate the blank space? I can't specify the format of the file name since the file name would vary from case to case.
Thanks a lot for any suggestion and correction in advance.
Attachments:
temp.vi ‏11 KB

Hi,
Please take a look to the attached VI. I hope that I understood what you really want.
I've replaced the Vi: Format into string with Number to Decimal String plus a Concatenate String.
Now, this is working for me, I don't get a space anymore. If something is wrong, please let me know.
Regards,
Paul
Attachments:
temp_back.vi ‏11 KB

How to add a new book category in itunes

Im trying to organise my PDF's that I have in iTunes, I only have about 8 so far, and they all were in a "Unknown" bundle within the "Categories"
Ive managed to change the "Unknown" to what all the PDF's respresent, but Im about to throw over 500 music books PDF's into iTunes so I can view them on my iPad, and I dont want them to end up in a mess and and mixed with all my audio books and previous mentioned PDF's
Thanks

Do you mean "how do (you) change the Category of a book in (your) iTunes Library?"
If so, highlight the book, select File/Get Info/Info>Genre and type in the "category" you want.
It would appear to be a minor glitch in the iTunes programme that shows "genre" on the item's Info tab when editing the "category" for a book and which shows under the heading of Category in the iTunes Library.

How to add namespaces before a tag name in XML??

Dear friends:
I have following code, and hope to add namespaces before the tagname such as Company, Location and even any attributes in this xml,
Can you help throw some lights??
Thanks in advance.
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Attr;
import org.w3c.dom.Document;
import com.sun.org.apache.xml.internal.serialize.OutputFormat;
import com.sun.org.apache.xml.internal.serialize.XMLSerializer;
import org.w3c.dom.Element;
public class DocWriteDOMStart {
    public static void main(String[] av) throws IOException {
        DocWriteDOMStart dw = new DocWriteDOMStart();
        Document doc = dw.makeDoc();
        ((org.apache.crimson.tree.XmlDocument)doc).write(System.out);
    /** Generate the XML document */
    protected Document makeDoc() {
        try {
            DocumentBuilderFactory fact = DocumentBuilderFactory.newInstance();
            DocumentBuilder parser = fact.newDocumentBuilder();
            Document doc = parser.newDocument();
            Element root = doc.createElement("Company");;
            doc.appendChild(root);
            Element loc = doc.createElement("Location");
            root.appendChild(loc);
            Element emp = doc.createElement("Employee");
            loc.appendChild(emp);
            emp.appendChild(doc.createTextNode("Daniel Bush"));
            Element emp2 = doc.createElement("Employee");
            loc.appendChild(emp2);
            emp2.appendChild(doc.createTextNode("Sandy Moore"));
            Element dept = doc.createElement("Department");
            Element e = (Element)dept;
            e.setAttribute("Nationality", "USA");
            e.setAttributeNS("www.yahoo.com", "dept", "http://www.google.com");
            //e.setAttributeNodeNS(newAttr);
            loc.appendChild(e);
            e.appendChild(doc.createTextNode("IT Depart"));
            return doc;
        } catch (Exception ex) {
            System.err.println(ex.getClass());
            System.err.println(ex.getMessage());
            return null;
}and I got
<?xml version="1.0" encoding="UTF-8"?>
<Company>
<Location>
    <Employee>Daniel Bush</Employee>
    <Employee>Sandy Moore</Employee>
    <Department Nationality="USA" dept="http://www.google.com">IT Depart</Department>
</Location>
</Company>hope to add namespaces before the tagname such as Company, Location and even any attributes such as dept, nationality etc in this xml,
I try but fail.

You would have to write code that does that, then. Right now your code writes that part of your XML as elements that aren't in a namespace. I can tell you know there are different methods to write elements that are in a namespace because you used a different method to try to write an attribute that is in a namespace.

How to add variables in the file name in Reciever CC?

Hi all ,
I am working on a outbound interface .
in the reciever communication channel i have to gve the file name as
S<plant code >.<file name>.<timestamp > >
example of filename: u201CS141. SPPFE860. 20110421114559u201D (The plant code has to be the same used in the field STABEMT presents in the header).
now in the structure it is like
MT
HEADER
STABMENT
i am using tht Avanced tab in CC but am not able to understand what to gve in reference.
Can you please help???

heyy i could find the solution to it....so am closing the thread..thanksss

How to add a new database service name to 9iDS

Hello,
I installed 9iDS and 9iDB on my laptop which worked fine for few months. I had trouble with 9iDB I/O system so I reinstalled 9iDB with a new SID name. I updated 9iDS by replacing old SID name with new SID name in tnsnames.ora file but it did not work.
Please someone suggest where should I update in 9iDS to access my newly installed database service with new SID so that forms appication builder can connect properly.
Currently it is saying :
ORA-12514: tns listener could not resolve service name given in connect descriptor.
Thanks,
[email protected]

Shyam,
could it be that you are still starting the old database tnslistener. Please make sure that you start the listener for your new Db instance.
Frank

How to add a random number to name when upload image

I always rename the file when upload, the rule was {POST.rename}.{KT_EXT}
<br />and I set a hidden field in the form with php code
<br />
<form>
<input type="hidden" value="<?php echo date('YmdHis').rand(1000,9999);?>" />, does anyone have good suggestion to rename file as unique number.</form>

don't include the id column in the import process, and create a before insert trigger on the table to populate the id with a sequence

How to add new payment methods to an existing EDI interface to bank

Hello:
<b>Requirment:</b> Need to add two new payment methods to an existing EDI interface to bank. As of now only USD EFT's are sent. With the new set up we need to be able to send CAD and USD checks and CAD EFT's to that particualr bank.
<b>Scenario:</b> The payment methods are all set up in the payment program. I need two separate variants on the program RFF0EDI1 thats triggers the EDI file. The trigger of the EDI after the payment run should have a different variant... but the message type ought to be the same.
Can some one please exlpain how I should go about setting this up. Thank you.

I figured out the way to do it myself, after poking around the system for hours together.
All I need to do was to make config changes in FI12- define the posting rules and the bank accounts the checks needs to be drawn against. Also adding the payment method "C" in the DME section of the FI12. Next check and see if the Idoc message types have been set to what was required by clicking on "EDI partner profile in the DME section. Also to have different varaints for the program RFF0EDI1 , I just had to goto SE38 select the program and create the new variant. For enabling EDI I had to do some config changes in FBZP- MAINTAIN PAYMENT PROGRAM CONFIGURATION: PAYMENT METHODS in country, Delete the entry made in the "Name of print data set" in the form print section and enter "RFF0EDI" under "Name of the print program" in the form data section. If anybody needs any other information , please let me know. Thanks everyone.

How to add india localization tax category name in PO interface

Similar Messages

Maybe you are looking for