How to add ITS Service into ESS HomePage?

Hi All,
I have a requirement to add an ITS Service(say BWSP) to the existing ESS HomePage.
I know how to create a new homepage and would like to know what to provide in the resources or services section for creating a new service.
Can anyone let me step by step on how to integrate a ITS Service into the HomePage.
Any help will be appreciated and suitably rewarded.
regards
Justin

(1) create ITS service iView in the portal
(2) add iView to your role (either first to a page and then a workset or what not, but so that it is in your role).
(3) Viewing the ROLE in the PCD content editor, choose your iView/Page that you add and note it's PCD path (again THROUGH THE ROLE)
(4) on the backend, create a resource and assign it's PCD path to the path your noted above (look at other homepage resources for example of the syntax "ROLE://portal content/...."
(5) create a homepage service and assign your resource to your service.
(6) create a new subarea or assign your service to an existing subarea.
(7) if you created a new subarea, you will need to assign this to an Area. Likewise, if the Area is new, you will need to assign it to a Area Group.
That should do it! Make sure you changes are in the correct client, refresh the portal cache, and viola....you should see your new ITS service. Easy peezy. (haha)

Similar Messages

How to add a system into Solution Manager directory.

Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip Bhattacharyya

Hi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher

How to add an item into the Newsstand

How to add an item into the Newsstand. Please do NOT reply using "tech-language." Use standard- normal everyday English. Thanks,
Don Otlin
Franklin Square, NY

Open Newsstand. Tap on the "Store" button in the upper right. Any newspaper or magazine you download from the store will appear in Newsstand.

How to add PDF files into a slides? (Flash 8)

I am new to flash and I am using Macromedia Flash 8. My task is simple enough: I need create a Presentation with Screens from PDF files: I have 10-12 PDF files which I want convert into flash presentation.
I have read this tutorial:
http://w3.id.tue.nl/fileadmin/id/objects/E-Atelier/Phidgets/Software/Flash/fl8_tutorials.p df
Chapter 11: Basic Tasks: Create a Presentation with Screens.
I'm having trouble how to add PDF files into a slides: I want insert a whole pdf file as separate slide, without splitting pdf file into separate elements: pictures, text, etc. I tried import pdf file into Flash, wheen import there is shown prompt how program should process this pdf file(add in stage, library, as keyframes, etc) , not clear which option is correct for my task. What I got is pdf file splitted into multiple images, text, - which is not what I want. I want keep PDF files without changes, preserve original design and formatting, just convert this pdf into flash, so presentation will consist of PDFs organized in correct order, then add navigation buttons and some effects. How to solve this task?

Just to avoid potential confusion... PDF is an Adobe format, but Flash 8 is/was not. Flash 8 came out before Adobe bought Macromedia. Even today, I don't believe anything has been done to accomodate direct integration of PDF content in Flash.

How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .

Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam

Asset related question - How to add a record into table ANLC?

Hello experts,
Could anyone tell me how to add a record into table ANLC?
Thanks very much!
Christina.

how you want add?
you want add direct in table???.
Normally if yo post any transaction this table will update.
ex;acquisition;
chandra

How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
Ice

Dear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas.

How to add extra labels into Bridge CS5?

Hi folks, nice to meet you all.
I do not want to edit or rename the existing 5 existing labels into Bridge CS5. I just want to create new labels. So, I want to add extra labels to have more than 5 labels.
Does anybody know how to add extra labels into Bridge CS5? If so, please, tell me how to do it.
Thanks.

You should move this post to the new Bridge forum as this one will soon die. Here is link http://forums.adobe.com/community/bridge/general

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

HT4913 How to add My Mac into my I Tunes account.

Hi, I want to download an App which I purchased through my iPad into my Mac Pro.
So, I noticed that my Mac is not yet registered to my device list, even though it is already authorised.
How to add the Mac into the device List? I can only see how to remove a device but not adding one.
Please help to give step by step guidance, since I tried to follow the Apple Support article and I followed it but could find the "add device".

Not sure what you mean.
Just sign into your account on your computer. Go to Quick Links>Purchased in the iTunes store to download past purchases or connect your iPad and click File>Device Transfer Purchases
iphone/ipod/ipad apps do not work on a computer at all.

How to add some reference into naming/ejb service?

are there some ways to add some reference into naming/ejb service for them to visit my library/interface/service.
thanks for your reply.

I am not sure of what you are asking, can you elaborate please?
Check out the "Application Reference" concept at <a href="http://help.sap.com/saphelp_nw04/helpdata/en/28/c9a3a9606f434ea757a3536d220704/content.htm">Application references</a>
Regards,
Kiran

How to add certain pages in ESS/MSS?

How to add certain pages?
Suppose in ESS -> Appraisals
We have
My Appraisals
Under this we want to give a link which will display a pdf document (which is printable) for (say) 180 degree feed back.
How can I do that?
If
1) the pdf is only printable?
2) instead of the pdf there is a form and some table in the ECC system needs to be loaded with the data provided in the form?

Hi Basu,
If you want to add custom pages to the Standard ESS / MSS, you have to add the required custom page to the Standard Page which is located at <b>Portal Content -> Content Provided by SAP -> End User Content -> Employee Self-Service -> Roles -> Employee Self-Service</b>
And if you want to display a pdf file in a iView, you can upload that pdf into portal KM and you can create a document iView of that and finaly you can use that iView in your custom page.
Thanks,
Trikanth

How to add a service account in SQL Server to display the "Service Account Name" and "Display Name"

Can someone
help with steps on how to add the following in SQL Server 2012 environments?<o:p></o:p>
"Service Account Name" and "Display Name"<o:p></o:p>
Your help will be greatly appreciated.<o:p></o:p>
leonie6214

Hello,
Is the following article what you are looking for?
http://msdn.microsoft.com/en-us/library/ms345578.aspx
If not, could you explain a little bit more what you want to accomplish?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to add a project into master project by Powershell

How to add a master project and sub-projects powershell
I use project server 2013, I want inserting multiple sub-project plans into a project master

Hello,
You can't do this directly in PowerShell using the PSI etc. as the PSI can't create master projects / insert subprojects. You could however do this in VBA if required or automate Project using PowerShell COM object.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to add text vertically into a Word margin with C# (using namespace: Microsoft.Office.Interop.Word)

I need to add text vertically in a word document outside the margins. How can I do this with Microsoft.Office.Interop.Word and C#?
Leonard Swarczinski Software Developer Postal Center International

Hi Leonard,
According to your description, do you want to add text vertically into Page Header/Footer? I wrote a sample for you.
using Microsoft.Office.Core;
using Microsoft.Office.Interop.Word;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace AddTextToWord
class Program
static void Main(string[] args)
CreateNewDocument();
Console.ReadLine();
private static void CreateNewDocument()
Object oMissing = System.Reflection.Missing.Value;
Microsoft.Office.Interop.Word.Application oWord;
Microsoft.Office.Interop.Word.Document oDoc;
oWord = new Microsoft.Office.Interop.Word.Application();
oWord.Visible = true;
oDoc = oWord.Documents.Add(ref oMissing, ref oMissing, ref oMissing, ref oMissing);
String HeaderText = "Hello everyone!";
WdParagraphAlignment wdAlign = WdParagraphAlignment.wdAlignParagraphCenter;
AddHeader1(oWord, HeaderText, wdAlign);
private static void AddHeader1(Application WordApp, string HeaderText, WdParagraphAlignment wdAlign)
Object oMissing = System.Reflection.Missing.Value;
WordApp.ActiveWindow.View.Type = WdViewType.wdOutlineView;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekPrimaryHeader;
Microsoft.Office.Interop.Word.Shape textBox = WordApp.ActiveDocument.Shapes.AddTextbox(MsoTextOrientation.msoTextOrientationVertical, 150, 10, 40, 40);
textBox.TextFrame.TextRange.Text = HeaderText;
WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekMainDocument;
If I misunderstood or anything wrong, please let me know and you can get more information from below articles.
Office development in Visual Studio
http://msdn.microsoft.com/en-us/office/hh133430.aspx
Abhout: AddTextbox Method
http://msdn.microsoft.com/en-us/library/office/aa171543(v=office.11).aspx
How to: Programmatically Insert Text into Word Documents
http://msdn.microsoft.com/en-us/library/vstudio/6b9478cs.aspx

How to add ITS Service into ESS HomePage?

Similar Messages

Maybe you are looking for