How to add KDE applications in KDE_base --SOLVED--

Hi,
I installed Archlinux base 0.7.2, xorg, KDE base 3.5
There is less in KDE base than I thought. ( no filemanger, no tools, no terminal ) In fact it is an empty dektop with a few icons even without applications linked to these icons.
I installed a few more KDE packages with pacman, but these are
not added in the KDE menu. How can I fix this ?

Linteg wrote:
I guess you didn't log out and log in again after installing KDE? If you do, your $PATH var gets updated, and /opt/kde/bin is added, then you will be able to start the kde apps by just typing their names.
Thanks Linteg, fixed the PATH this is ok now.
I have a few "working" icons on my desk now, Konsole, Kwrite, Firefox but I don' t find find how to add these
applications to the KDE menu.

Similar Messages

How to add bsp application in workflow

Hi .. Experts..
i am new to workflow
i want to add bsp application in workflow..
this is a another task in apprasial process.. there is workflow for standard apprasial process..
but i have created a new bsp application..
apprasiee selects minimum 10 apprasiers . to all the 10 people selected bsp application should go to them to thier outlook..
once thy complete the filling of application and submit it, email should trigger in apprasiee outlook that this apprasier has completed your application filling..
please help in this as i am new to this .. i would be thankful if u explain me in detail..

Hi Subramanyam,
To add the fields in the field group, follow the below mentioned sequence. However, this method is used to add predefined SAP fields into Field Group. We are not talking about adding Z-Fields into the Field Group.
a) Goto Transaction CRMC_BLUEPRINT_C.
b) Click on Application Elements - You will see hierarchy of PCUI Objects viz. Applications, Views, Field Groups, Tab Page Groups, Toolbar Groups, Events.
c) Open Field Groups. Go to the desired Field Group. The desired field group can be found by expanding the Applications Hierarchy.
d) For the Given View within the Field Group - You can Right Click and add the desired pre-defined SAP Field.
Regards
Tushar Kansara

How to install KDE Applications 5?

Hi,
Are there any programs dedicated to kde 5? With KDE ArchWiki shows "Applications based on KF5 will have a first release in December 2014." So, I mean mostly about apps like Dolphin, Kate, compatibility with gtk (oxygen-gtk*). Thank you for your help in advance.

@formoza - Please take a look at: https://www.kde.org/announcements/annou … 4.12.0.php - KDE Applications 14.12 is a very strange Most of these apps are based on kdebase-workspace 4.11.14 (KDE4), only few are KF5 based (kate, kwrite, konsole, gwenview, and few more). Dolphin is still KDE4 apps. There is a 3rd party repository with KDE Apps 14.12 in 14.11.97 (RC1) version, look at: https://bbs.archlinux.org/viewtopic.php?id=190482
I've allready tried build *-frameworks-git apps from AUR, but it's not possible. Almost all of these apps are build against KF5-git and Plasma5-git, then if you want to build them from AUR, you have to build all KF5-git, Plasma5-git and KDE Apps-git. And... only few more apps will be native Qt5/Plasma5 apps then there're allready in kde-beta repository.
According to: https://dot.kde.org/2014/12/17/kde-appl … orks-ports KDE Team are expecting the porting of applications to Qt 5 and Frameworks 5 to happen over the next year or two.
In the other words, most of KDE Applications 14.12 are bug fixes releases to KDE4.14.2 apps
Personnally, I am user of Plasma5 + KDE Applications from kde-beta repository by arojas. You have to know, that allmost all plasmoids for KDE4 aren't compatibille to Plasma5 platform.
Last edited by pb (2014-12-26 10:48:53)

How to add Services/applications directly in the area group page

Hi Experts,
I'm implementing the standard ESS/MSS for my client, but they don't want to have the SAP way of attending the apllication which is : area group --> area --> subarea --> and finally services.
but they want to have directly in the first page the 4 applications of Personal information (address, bank information, family members, and personal data)
I explain more : instead of having ESS --> Overview --> Personal Information --> address for example we want to have Personal Data --> address and we eliminate the Employee self service and the Overview steps.
Is this possible, If so, how?
Thanks for your help

Hi, that's what I did,
bank information is working but when we want to change the data from ESS I'm having an error: Data record xxxxxx has grouping value "" instead of 06
the other 3 applications having also error: ''Country/Structure do not match application country
I did the customization in R/3, defining the ressources and the services for France.
Do I have to do something else?
Thanks for your help guys.
Regards,
Aymen

How to add to applications?

A friend made a cd of banners to use in my newsmagazine. I take the cd from the desk top and drop it into applications where it appears. But I can access it only when the disk is still in the computer. A message appears saying the volume cannot be found. What to do?
Apple discussions is terrific. Where would I be without you?
-Govan

PeterBreis0807 wrote:
btw This reminds me this is another annoyance in OSX.
This changed the behavior from the classic Mac OS, where dragging a volume icon onto your Hard Drive sensibly created and filled a folder with the same name as the volume.
At last you tell the truth. What bother you is what changes your habits !
And while we are about it, we can't simply print the contents of windows in OSX to attach to DVDs/CDs sent to a client or printer.
I do that quite everyday under MacOS X. I just copy the folder's contents onto an AppleWorks WP document.
Is it useful to post a script returning the windows's contents in the clipboard?
--\[SCRIPT]
tell application "Finder" to set liste1 to the selection
set liste2 to {}
repeat with i in liste1
copy (i as text) to end of liste2
end repeat
set the clipboard to my recolle(liste2, return)
on recolle(l, d)
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to ""
return t
end recolle
--[/SCRIPT]
I have no time to comment it.
Here is the result:
Western 4:Tout Gerbino:pour ebay:X11910à11916ƒ:z280275458404:
Western 4:Tout Gerbino:pour ebay:_X11910à11916ƒ:#X11915.JPG
Western 4:Tout Gerbino:pour ebay:_X11910à11916ƒ:#X11910.JPG
Western 4:Tout Gerbino:pour ebay:_X11910à11916ƒ:#X11911.JPG
Western 4:Tout Gerbino:pour ebay:_X11910à11916ƒ:#X11914.JPG
Western 4:Tout Gerbino:pour ebay:_X11910à11916ƒ:#X11913.JPG
Western 4:Tout Gerbino:pour ebay:_X11910à11916ƒ:#X11916.jpg
Western 4:Tout Gerbino:pour ebay:_X11910à11916ƒ:#X11912.JPG
It would be a very long thread indeed that listed all the backward steps taken in OSX, and the many backward steps that were attempted by Apple until they were howled down by the users.
Just an example, they dropped Folder Actions but re-integrated them two years later in a more powerful way
And, you know what, you may perfectly continue to use MacOS 9 if you want, the market of second hands machine is a huge one
I'm quite 65 years old and I'm not afraid by changes. I always heard funny ones claiming that "it was better before".
Yvan KOENIG (from FRANCE lundi 13 octobre 2008 19:51:49)

How to add an Application custom error to the FacesPageLifecycle

I am trying to implement an error handling framework for an application. I have created the required Execption classes(Extending the JboException class) and added a MyExceptionHandler that extends DCErrorHandlerImpl. I am overriding the reportExecption method and removing the error codes etc.
When an error case is encountered MyExceptionHandler.reportException is called from the page bean. This does not display the error in the Faces error dialog. I have noticed that MyExceptionHandler.getDisplayMessage is not invoked for my the custom application errors.
Other JboExecption generated by the database constraints or validation errors are shown in the error dialog and there is a call to the getDisplayMessage after the call to reportException in the MyExceptionHandler.
Should I explicitly call FacesPageLifecycle.addError...or something similar? If so what is the right place to do this.
Please point me to any available documentation if available.
Thanks,
Sireesha

That custom error handler is generally to handle errors thrown by your Model project. The place I first noticed this is when I tried to catch and specially handle the infamous token validation exception (even though that's a JBO exception, it's thrown by the databindings, not by the Model project...which is kind of unfortunate, I think; they should have used something in the oracle.adf.model package, which is where the other databinding implementations are stored). To really catch all exceptions, you have to handle them directly in the FacesPageLifecycle, not the ErrorHandler.
Edited by: Avrom Roy-Faderman on Oct 2, 2008 1:32 PM
Wait...were you also calling handler.reportException() directly? You're definitely not supposed to do that. Just throw your exceptions, and the appropriate functions will be called automatically as part of the lifecycle. This is independent of the other problem--that ErrorHandler never gets used for exceptions thrown from outside the business services layer.

How to add dll library to application?

I start programmed the CVI a few weeks ago and I have a little problem. I must make an application layer for profibus master device. However I total do not know how to add dynamic library to program, because in another way I get the error: undefined symbol. I know that it very trivial, but I cannot find solution. I have a lib file and also I include file about device, but I still get the error – undefined symbol – can you help me?
Thanks very much for any advice or help

Dear laszku,
Are you looking for solutions to connect your CVI application with PLC? Because there are also solutions for that which are easy to use, and to implement with CVI.
If you want to use your DLLs, there are some on-line help, how to import them in CVI.
Basicaly there are two different method to import DLLs:
- static import, when you import the library in your CVI project. The dll will be loaded when the exe starts running. If there is an issue to load the library, you'll be able to get the error at compilation time.
- dynamic dll import, when you load the library at run-time. With this, you get the flexibility to control, when will be the dll linked to your exe in the memory, while running. The disadvantage is, you'll get errors only at run-time.
I recommend you some of our on-line tutorial, how to load DLL into your application in CVI:
CVI Help: Loading Dlls - This says: You cannot import DLLs directly into your project. You need to create DLL Import Library, which can be imported into your project.
To do so, look at this knowledge base: Creating Import Libraries for a DLL in LabWindows/CVI
You might get answers for your following questions at this FAQ page:
FAQ: Using Dynamic Link Libraries with LabWindows/CVI
Some help sites:
Rules for Using DLL Files
Linking to Functions Defined in a DLL From LabWindows/CVI
If you need dynamic linkink, you can get example code with this site:
How Can I Access DLL Functions in a LabWindows/CVI Program Without Including the Import Library in t...
I hope, I could help you to find the way how to import DLL libraries.
If you still couldn't solve the error after studying the links, please provide me more information, where, which symbol is missing, and also the full error message.
The error you get, can be caused by the linker or pre-compiler also, which doesn't find the symbol you requested. Please check the path of your library and dll also.
Best Regards,
Tamas Szekely
Applications Engineer
National Instruments

[SOLVED] Eastern arabic numerals in Qt/KDE applications

Hi,
i have issue with Qt based applications -> they use eastern arabic numerals
I tried using another DE (xfce, lxde, gnome) and also X only ("sudo startx" from tty), the problem persisted. In GTK applications is everything correct. For example, Transmission has both GTK and Qt frontends, so i tried it - the Qt one has the problem present.
http://tinypic.com/r/2z8vsxi/6
(sorry about the locale in the GTK one (right), i don't know how to switch locale of it from KDE)
Almost all KDE apps suffer from this (KTorrent, Amarok, KDE Telepathy, KMail...)
From non-KDE applications is there also Skype, which has also this problem (and presence of issue in Skype led me to conclusion that problem is with config of Qt itself, not KDE)
I believe that i have just something misconfigured, but i don't know where i should search for such configuration, i already tried google.
What is weird for me, this also happened in Chakra, which installation is like next->next->next->finish, however in Kubuntu numerals were correct.
Computer is HP Probook 4530s A1D23EA, bios F.29.
Any ideas?
Thanks in advance.
EDIT / Solution:
It's bug in Qt 4.8.4 only in Slovak locale. Since it has been fixed already (according to https://bugreports.qt-project.org/browse/QTBUG-28843) in Qt 4.8.5 but this version is not yet in repo, i made a workaround for that.
1. uncomment some other locale in /etc/locale.gen ( i used en_US.UTF-8 UTF-8)
2. re-generate locales with locale-gen
3. edit /etc/locale.conf and add line LC_NUMERIC="en_US.UTF-8" (or whatever you decided to use)
4. reboot
Last edited by MrJabucko (2013-01-08 14:00:04)

I can confirm the same issue Lenovo Thinkpad Edge E530
locale output:
[root@gofree gofree]# locale
LANG=sk_SK.utf8
LC_CTYPE="sk_SK.utf8"
LC_NUMERIC="sk_SK.utf8"
LC_TIME="sk_SK.utf8"
LC_COLLATE="sk_SK.utf8"
LC_MONETARY="sk_SK.utf8"
LC_MESSAGES="sk_SK.utf8"
LC_PAPER="sk_SK.utf8"
LC_NAME="sk_SK.utf8"
LC_ADDRESS="sk_SK.utf8"
LC_TELEPHONE="sk_SK.utf8"
LC_MEASUREMENT="sk_SK.utf8"
LC_IDENTIFICATION="sk_SK.utf8"
LC_ALL=
Last edited by gofree (2013-01-01 17:40:17)

[Solved]Remove button icons in KDE applications when running under dwm

I run dwm but also use KDE applications.
KDE applications do show icons on dialog buttons:
I gather that these buttons can be disabled in the system settings dialog when running a full KDE desktop. My question is: How do I achieve this - remove the icons on buttons - while not running a full KDE session?
kcmshell4 doesn't seem to expose an option to do so in any available module, including 'kcmshell4 icons'.
The systemsettings5 option repertoire is incomplete and only has the modules "Workspace>Desktop behaviour", "Workspace>Shortcuts", "Network>Settings" and "Network>Connectivity".
In my .xsession, I am currently exporting
export QT_STYLE_OVERRIDE=gtk # Make Qt5 use the GTK+ theme
export DESKTOP_SESSION=gnome # For something I can't quite remember
I've also seen XDG_CURRENT_DESKTOP=gnome vs XDG_CURRENT_DESKTOP=kde floating around, but neither achieves anything in this regard.
Does anybody know which setting in which config file I could set to emulate what the KDE configuration GUI does in a KDE session, or what KDE packages I would have to install in order to add the correct settings component to my KDE configuration utilities (KDE4 and/or Plasma 5), or what environment variable to set? A last resort would be installing a full KDE workspace or Plasma 5 and toggling the setting there, but I'd rather avoid doing that.
Last edited by 2ion (2015-05-07 13:39:25)

Xabre wrote:
Would running "kcmshell5 style", or "kcmshell4 style" be an option? Am not sure what you have installed, but under fine tuning tab there, there's exactly what you need.
Edit: if that doesn't work, .config/kdeglobals
ShowIconsInMenuItems=true
ShowIconsOnPushButtons=true
ToolButtonStyle=TextBesideIcon
ToolButtonStyleOtherToolbars=TextBesideIcon
Change to false and TextOnly, respectively
Might have to look for another kdeglobals file for kde4 apps, which should be either in .kde4 or in home dir, since there's a bit of a mess currently during transition
Please excuse my belated reply; thank you for the solution:
The line
ShowIconsOnPushButtons=false
in kdeglobals removed the icons for KDE 4 applications. For some reason, applications using KDE Frameworks 5.x did never show the button icons to begin with.

How to add MS Office add-in from inside a Thinapp 5 virtual application to a MS Office 2013 suite that is installed on a base image

Hi,
We have the following solution:
VMware Horizon View 5.3.1
Non-persistent Linked-clone pool with delete VM after logoff
Windows 8.1 Update 1 Enterprise 64 bit
MS Office 2013 32-bit installed on image
Thinapps registered for each user from logonscript with thinreg.exe command. Thinapps is located on a network share
Native Windows roaming profiles with appdata/roaming, appdata/local without appdata/locallow(persona management does not support Windows 8.1 in View 5.3.1)
This is our issue:
We have a 3rd party application with a couple Thinapp entrypoints(exe files) and in the Thinapp package process we also installed Office addins. We tested that the Add-ins was opened inside Outlook, Word and Powerpoint before post installation scan.
The problem is that the add-ins is not added to Office 2013 before or after the Thinapp is started on a test client.
I have tried several changes in the package.ini and virtual filesystem attributes(no registry changes yet):
Package.ini:
ChildProcessEnvironmentExceptions=WINWORD.EXE;EXCEL.EXE;POWERPNT.EXE;OUTLOOK.EXE;
ChildProcessEnvironmentDefault=External
ChildProcessEnvironmentExceptions=excel.exe;outlook.exe;powerpnt.exe;winword.exe
ChildProcessEnvironmentDefault=Virtual
VirtualizeExternalOutOfProcessCOM=0
DirectoryIsolationMode=Merged
RegistryIsolationMode=Merged
I have also read that you could make entrypoints to the locally installed Office 2013, but I get errors on the build process. ref. link: http://edwinfriesen.nl/content/?p=105#comments
The best thing would be if the add-ins were added in the logon process together with thinreg.exe, but if that is not supported, the add-ins must be added to Office either in a custom Office shortcut/entry point or after starting the Thinapp virtual application.
Remember that the application needs to registered every times the user logon, because we use a non-persistent View pool.
I would really appreciate if somebody could tell me how to add Office add-ins from inside a Thinapp virtual application/package to a locally installed MS Office 2013 suite on a Windows "base" image?
We do not want to add the whole Office suite to the Thinapp virtual package and not add the add-ins trough GPO,SCCM etc.

What about the COM object parameters in package.ini ?
We can live with scripting in logon or changed logon scripts etc.
And you don't no need to lock in the project files.
From package.ini documentation:
ObjectTypes Parameter
The ObjectTypes parameter specifies a list of virtual COM object types that are visible to other applications in
the physical environment. You can use scripts, such as VBScripts, to call objects that start captured applications.
An object type is registered to only one native or virtual application at a time. If you install Office 2003 on the
native machine and want to use a virtual Office 2007 package, you must determine whether to have the virtual
or native application handle the object types.
If you want the virtual Office 2007 to handle the object types, you can leave the ObjectTypes setting in the
Package.ini file, build the package, and register it using the thinreg.exe utility. If you want the native Office
2003 to handle the object types, you must remove the ObjectTypes setting from the Package.ini file before
building and registering the package.
You cannot add random entries to the ObjectTypes parameter.
You can only remove entries that were generated by the capture process.
Example: Starting a Virtual Application When a COM Object is Created
If a script or a native application creates an Excel.Application COM object or other COM objects listed in the
ObjectTypes parameter, ThinApp starts the virtual package.
[Microsoft Office Excel 2007.exe]
ObjectTypes=Excel.Application;Excel.Application.12;Excel.Chart;
Excel.Macrosheet;Excel.Sheet; Excel.Workspace

How do you add an application event to the Applications Panel

How do you add an application event to the Applications Panel.
My previous post referred to .ashx files, and the problem seems that Firefox, by default, does not recognize a .ashx format being read by Adobe Acrobat.
Therefore there needs to be a way to add Applications and Events into the Applications Panel under Preferences

domdp wrote:
...I have Theme L selected and I get 10 icons along the left side and bottom....
...I am thinking I may be limited to 10 icons....
Gotcha... But actually its limited to 9 icons in the L theme as the Profiles icon is always present. From that screen hit the Menu key to display the bigger list of icons. Arange them so the first 9 icons are the ones you want to see on the L theme.

How to add A Gauge Control in VC++ MFC Application

How to add A Gauge Control in VC++ MFC Application.
i want to add Gauge Control in my Application. like meter.
ther meter should perform depends upon the value.
for example , Assume the meter have 10 units 1-10 . if the value (ie, input ) is 4 the meter point out the 4 like that.

How to implement CProgressCtrl to like this.
https://social.msdn.microsoft.com/Forums/getfile/643828
You need to implement this all by your own or if you are lucky you may something find @Codeproject, CodeGuru, ...
Here you will find examples on creating custom controls (in general)
http://www.codeproject.com/Articles/521/Creating-Custom-Controls
https://msdn.microsoft.com/en-us/library/bk2h3c6w.aspx?f=255&MSPPError=-2147217396
You will find a lot more stuff if you try your prefered search engine.
Maybe this one fits the best to your requirements:
http://www.codeproject.com/Articles/9375/CStatic-derivative-CSpeedoMeter-class
Best regards
Bordon
Note: Posted code pieces may not have a good programming style and may not perfect. It is also possible that they do not work in all situations. Code pieces are only indended to explain something particualar.

How to add accessibility to already built application

Hi,
Can any one help me how to add accessability to already built application. jdev version which am using is 11.1.1.4.
Thanks in advance.
Regards,
lavanya.

Hi,
its mostly a configuration in ADF Faces
http://docs.oracle.com/cd/E23549_01/web.1111/b31973/af_access.htm
Frank
Ps.: One of the beauties of using ADF Faces instead of hand-crafted web site in which case you would have been screwed

How to add i18n features to a Struts application?

How to add i18n features to a Struts application?
txs!

How to add I18N to Struts application
operation:
1) provide your native ascii encoded properties file.
2) set the correct language priority. (As to IE: Tools - Internet Options - Languages
3) coding: add correct encoding in your web page, exp. for zh_CN:
<%@ page contentType="text/html; charset=gb2312" %>
utility batch file:
native2ascii -encoding gb2312 MessageResources_zh_CN.txt MessageResources_zh_CN.properties
copy MessageResources.txt MessageResources_en_US.properties
note
Before you run the utility batch file, you should first add %JAVA_HOME%/bin to system %PATH% environment variable.

How to add button on application tool bar of standard transaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

HI
SHD0 is used to create and maintain Screen and Transaction Variants..
to know more about Screen and trransaction variants click on this link
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).

How to add KDE applications in KDE_base --SOLVED--

Similar Messages

Maybe you are looking for