How to add keyframes to audio track using mouse?

I saw in a tutorial that you can click on an audio track and add keyframes (small dots) and then use them to adjust sections of the audio track. When I click nothing happens. Is there a modifire key I need to use in combination?
Thanks

The Option key.

Similar Messages

  • How do I play CD audio tracks using LabVIEW?

    I need to be able to play and stop tracks from CD's. Is it possible. I know it's easy to play wav's but I need to play the source.

    Hi,
    I've made an example for you based on MCI command
    mciSendStringA from winmm.dll
    This example plays the specified track from CD.
    The idea is in sequential sending of the next strings to driver:
    "open cdaudio wait"
    "set cdaudio time format tmsf wait"
    "play cdaudio from T1 to T2"
    "stop cdaudio wait"
    "close cdaudio wait"
    The example is attached and works fine on my PC.
    Good luck.
    Oleg Chutko.
    Attachments:
    PlayCD.vi ‏48 KB

  • With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my UBS microphone?

    With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my USB microphone?

    larryh
    Please remind us on what computer operating system your Premiere Elements 13 is running
    Using your own music.....
    Yes, with important but.....
    Details
    If your music is from iTunes, more than likely you will get some sort of error message from the program when you try to import the iTunes music into Premiere Elements (most versions including 13). In that case, please convert the iTunes music to the wav version in iTunes using the following iTunes instructions.
    iTunes: How to convert a song to a different file format - Apple Support
    If you are getting program error message using Premiere Elements 13 Add Media/Files and Folder with other than iTunes music, please give the source and properties of that music.
    Using USB Microphone....Not recommended by Adobe....See Adobe ReMe
    Details
    As for Premiere Elements narration clips using the its Narration Tool
    1. Adobe documentation indicates the USB microphone do not work in Premiere Elements and suggest the use of microphones that connect to the computer via computer jack.
    But, there are some scattered cases where the user has found a USB microphone that has worked for him or her.
    2. Be sure to check Edit Menu/Preferences/Audio Hardware ASIO settings to assure that Input and Output are enabled.
    3. There have been reports (Premiere Elements several versions) where addition of narration using the Narration Tool results in loss of pre-existing
    sound on numbered audio track clips and soundtrack.
    ATR Premiere Elements Troubleshooting: PE12: Audio Losses After Narration Addition
    4. In my particular Premiere Elements 13 on Windows 8.1 64 bit, I have found that I need to set the Mic Sensitivity all the way to the left to avoid
    serious audio distortion.
    I have tried to give you an overview to avoid surprises if you have not used the features that you pointed to in your thread question. Please let me know if you need further information.
    Thank you.
    ATR

  • How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

    How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?

    After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?
    How exactly are you doing this?
    When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file.  Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
    You should see this prompt, when you are joining the regions:

  • How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

    How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

    Binbashi
    You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
    To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
    You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
    If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
    Looking forward to learning of your results.
    Thank you.
    ATR

  • Does anyone know how to record directly to a track using Logic's effects?

    Hi there, does anyone know how to record directly to a track using Logic's effects? I know that it needs to run through a buss somehow but I am not quite sure how. Need to Di a bass and want to keep the levels down using a compressor (recording strait into a Mbox with Logic 8). Any help will be greatly appreciated. Thanks.

    If you route your Bass into a channel in Logic and put plugins/fx on the channel plus you have monitoring on (and monitoring off on your external mixer) - you can record while listening to the effected sound. However what is being recorded is the clean/raw audio - this is a good thing as you can later change your compression/fx settings - printing the effect at this early stage is normally avoided.
    Ian

  • How to not overlap two audio tracks?

    Hi, I use Adobe Premiere and I recently I had a problem with Action! (a video recording program) if you register the microphone and the stereo, Premiere overlaps the two audio and is not making me hear my microphone. I also tried to click the check mark on recording program (split audio tracks) but Premiere not divides. How can I create two audio tracks divided on the same record?

    Are you saying that if you walk up to your Mac, iTunes suddenly opens? 
    At any rate, you should be using two different accounts on the Mac, each of you logging into your respective accounts, if you don't want common syncing.

  • How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

    How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

    If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
    Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
    Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
    Here is a good Tutorial.
    If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

  • Can't add a new audio track without any settings

    Can anyone tell me were faced with the same problem. Doing audio post production in Logic Pro X, the latest version, the project is big, At some stage the work I was faced with the fact that you can't add a new audio track without any settings, no matter what inserts I track with duplicate settings of one of the tracks and it begins to sound with this track. I don't add a new audio track with duplicate settings. I add a new one, and I still opens the track with some sort of settings. What is it? This is a glitch or I'm somewhere that we have not considered? Duplicates the configuration of one of the tracks collected in group 1, which I did for editing convenience. Duplicates and also automation and if the new track am I doing something then this machine is transferred to the existing track from this group.

    Everything works in full 'Logic Pro X' mode. It's just a glitch in my project. The problem while you decide this: I insert a new track and it reset and set the output.

  • How to add an image over another using af:image

    How to add an image over another using af:image
    Thanks,
    Veera

    i have a image which is black strip. i have added that to af:image
    <af:image source="image1" id="image" />
    on the black strip, i need to add company logo.
    how to achieve it.
    Thanks,
    Veera.

  • How to add target to jmsSystemResource MBean using JMX

    Does anybody know how to add target to jmsSystemResource MBean using JMX in WebLogic 9.0?(I am not using WSLT) I always get "NoSuchMethodException":
              [jmsServer] Caused by: java.lang.NoSuchMethodException: addTarget(weblogic.management.configuration.
              TargetMBean,) for com.bea:Name=admin01DefaultJMSServer,Type=JMSSystemResource

    go to the object which u want to compare
    go to->version management->select the TR request no->and select remote comparision there->and give the system where u need to compare this object
    and next press compare
    hope it will work
    cheer
    s.janagar

  • HT5654 how to add videos to the ipad using the latest version of itunes

    how to add videos to the ipad using the latest version of itunes ?

    Hello zaraa90,
    After reviewing your post, I have located an article that can help with syncing content. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    Sync your iPhone, iPad and iPod with iTunes using USB
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How to add metadata to split tracks

    I know how to do it to a single track but when i click on the next track it still show the name from the previous track. How to add metadata to split tracks for like a mixtape?

    Thanks for the screenshots, very helpful.
    Once you split them into different tracks, and each track is a different file on disk (as shown in your Windows Explorer / Finder screenshot), you'll want to:
    Go through each file
    Enter the desired metadata via the Metadata Panel (see below)
    Save each file
    If you're working with MP3 files, the relevant fields are the ID3 tags shown in this dialog:
    If you're saving as WAVE files, the relevant RIFF metadata fields are shown in this dialog
    Once you enter the info you want into those fields and the save the file, then it should show up in Windows Explorer which is what I think you're going for.

  • How to add discussions to Collaboration Room using Rooms API

    Hi All,
    How to add discussions to any room using the Rooms API?
    I looked at the NW04s javadocs, but could not find which would help?
    Any pointers will be appreciated.
    Regards,Sandip

    Hi All,
    Any help!
    Any help from SAP? Are the discussion APIs available?
    Any input is appreciated. Thanks
    Regards
    Sandip
    Message was edited by:
            Sandip Agarwal

  • How do i mute an audio track without deleting it.

    how do i mute an audio track without deleting it?

    There have been a few recent posts, where Audio Mixer settings are not "held," in PrE 11. Those cited problems seem to be Project-specific, in that Audio Mixer works, as expected, in a new Project - just not the one, causing issues.
    I do not know if there is a glitch/Bug in Audio Mixer, or if the users are doing something that is "disconnecting" Audio Mixer in some way.
    As a test, create a New Project, Import a Video file with Audio (Muxed Video Stream and Audio Stream), and test Audio Mixer, and the Mute function there. How does Audio Mixer work in that Project? Does the Muting of the Audio "stick?"
    Second test: in your existing Project, Select all the Clips on that Audio Track #1, and drag them to Audio Track #2, or another, empty Audio Track, and test the Mute for that new Track, in Audio Mixer. How does that work for you? Does the Mute stick?
    Good luck,
    Hunt

Maybe you are looking for