How to add leading zeros to kunnr field

Hi All,
I need to add leading zeros to KUNNR field runtime.
i.e for some customer it is displaying '2001084606'
some customer's it si displaying '10434'.
I want add leading zeros when customer length is
not equal to ten '10'.
plz kind let me know this is urgent.
Regards
Bhaskar

Hi there,,
Kunnr is using a dataelement with Char 10.
You can do in this fashion to resolve your issue.
len = strlen (itab-kunnr).
len is having the lenght of the customer number.
if len < 10..
 while len < 10.
 concatenate '0' itab-kunnr into temp_text.
 add 1 to len.
 endwhile.
endif.
now finally you can assign temp_text to your itab-kunnr.
hope this way you can resolve your issue.
if found helpful,, don't forget to reward points.
Thanks-
Rahul.

Similar Messages

How to add two zeros end of field

how to add two zeros end of field?

Hi srinu,
If it's a number field, then just multiply by 100.
If it's a string, then just use CONCATENATE and add the '00' to your existing string.
Hope this helps.
SL

How to add leading zeros to a packed variable

Hi all,
I have a to add leading zeros for a packed field.
eg.
Data : brgew like mara-brgew.
brgew = '12.063'.
but I have to display the field as '0000000000012.063'.
How can we achieve this?
Regards.

Execute the code .
REPORT zex13 .
Data : brgew like mara-brgew.
brgew = '12.063'.
data:val(18) type c,
     in(13) type n ,
     dec(6) type c.
data : a type i ,
        b type i.
        a = TRUNC( brgew ).
        write:/ a .
in = a.
write:/ in.
        dec = frac( brgew ).
        write:/ dec.
        concatenate in dec+2(4) into val separated by '.'.
        write:/ val.
see if this works for u .
regards,
vijay

How to add leading zeros to a characteristic in CT04

The business is requesting that we change a class characteristic so that it adds leading zeros. Currently the characteristic is set as numeric with length of 6, no decimals. Is there any way via template or otherwise to force this characteristic to store leading zeros, as recorded against the characteristic?

Hi David,
1. If you are mentioning about the "Characteristics"This is Standard Field name.
2. You will not be able to influence the same,
3. Also i doubt if you are talking about the Characteristic Value - Since only in the Char Value we will be able to define the length, etc.
4. In case of Charvalues if you want leading zeros then create it as character , where you can store with leading zero
Reg,
Dsk

How to add leading zeros ?

Hi Friends,
I have a shipment no say 10 char long . Now the thing is in my program I need to add leading zeros if the shipment no is not 10 char long .
For eg : if the tknum is 99919 . I need to make use of a command to make it 10 char long lke 0000099919.
Also I need to be able to add zeros if tkum is 5 or 7 or 8 char long .
How do i add these leading zeros to fill up the remaining positions ?
Thanks,

hi ,
use the following code.
data : lv_vbeln(10) type c.
 lv_sonumber like vbak-vbeln.
This function module will convert the data into the required format based on the data type of the variable that you are passing in import paramter of the funcation module.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = lv_vbeln
 IMPORTING
 OUTPUT = lv_sonumber
Thanks
mahesh

Urgent........How to add leading zeros to negative values.....

Hi,
I want to add leading zeros to negative values.
Present Value : -567
Expected Value : -0000000567
I know to adding leading zeros with the help of CONVERSION_EXIT FM.
Thanks in advance.
Regards,
Kumar.

Hi
Use below FM.
CONVERSION_EXIT_ALPHA_INPUT
Try out below FM with the above one.
CLOI_PUT_SIGN_IN_FRONT
ISJP_GET_SIGN
or you can use
WRITE variable USING EDIT MASK '-___________'.
or
CONCATENATE syntax
Hope it will solve your problem
Reward Points if it is helpful.
Message was edited by:
 ilesh 24x7
Message was edited by:
 ilesh 24x7

How to add leading zero using the toString() function?

Hi,
I've looked in the user manual and I can't find any reference to toString() for syntax information. Isn't there a parameter for me to use to specify the string lenght? And whether to add leading zeros or not?
Here's the code I need to add leading zeros:
playbutt.addEventListener(MouseEvent.CLICK, playSound);
function playSound(e:Event)
SoundMixer.stopAll();
var num:Number = Math.ceil(Math.random()*43);
bigNum.text = num.toString();
var path:String = "Track No" + bigNum.text + ".mp3";
trace(path);
var s:Sound = new Sound(new URLRequest(path));
s.play();
The files I'm trying to open starts at "Track No01".
Any ideas?
Ron

Thank you for the code replacement.
By the way, instead of having the user click a button to start a random music file (MP3), I'd like to get the music going as soon as one loads a webpage and once the first tune is finished playing jump to another randomly selected music file (MP3).
I've search via Google for ideas but couldn't find anything that came close to what I need done.
Any ideas?
Regards,
Ronald

How to remove leading Zeroes in all fields in Payload

Hi,
How can I remove the leading Zeroes in every Filed I have in whole Payload Structure.there are around 10000 fields that have to be removed the leading Zeroes.any good idea please.
 <POSNR>000010</POSNR>
<MATNR>000002465640</MATNR>
<ARKTX>000012 KG D107</ARKTX>
<MATKL>00030010000</MATKL>
<WERKS>0000ORGC</WERKS>
<LGORT>0000GC55</LGORT>
<CHARG>000TEST</CHARG>
like this mutliple segments and multiple Fields.so I can take as whole payload with multiple fields should not have leading Zeroes.I can handle if they are 10 0r 20 fileds,but not like whole pay load/1000 fields right.
thank you,
Prem

Hi
You can have an additional XSLT mapping, to your existing one..
use copy-of & apply-templates to copy the whole tree & make changes recursively.
below is a sample code , the marked line is where you need to try your logic of trimming Zeros. (this code does upper case)
add this below code in your interface mapping object, as XSLT mapping, which does the job (only try putting your logic)
<xsl:stylesheet
 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
 version="2.0">
 <xsl:output method="xml"
 indent="yes"
 omit-xml-declaration="yes"/>
 <xsl:template match="*">
 <xsl:copy>
 <xsl:copy-of select="@*"/>
 <xsl:apply-templates/>
 </xsl:copy>
 </xsl:template>
 <xsl:template match="text()">
 <xsl:value-of select="upper-case(.)"/>
 </xsl:template>
 </xsl:stylesheet>
hope this fixes your issue
Regards
Vishnu

Add leading zero for character field on ALV

hi all ,
i am currently making an ALV report. i have a field which is 'rassc' char(6) in the internal table which should be shown on the report.
before i use function to show alv report , i saw the value of this field is '080' , but what i get on the report is '80'. i want the leading zero . but i don't know how .
plz guide me.
regards
Kevin

hi,
check this.
DATA:
var TYPE matnr.
WRITE '80' TO var RIGHT-JUSTIFIED.
TRANSLATE var USING ' 0'.
WRITE: var.

Need to add leading zeros to the field if field length is less than 6

Actually the field length is 16.
But for some manual entries it is comming as 4 chars.
so if field length is less than 6 then it should be replaced by leading zeros.
Moderator message: very basic, please (re)search yourself before asking, @all: please do not reply to basic questions, points removed.
locked by: Thomas Zloch on Sep 9, 2010 11:43 AM

Hi Ravi,
Do it in 2 steps.
1. check the length of your entry by strlen function and get the length.
2. If the output is less than 6 call the FM CONVERSION_EXIT_ALPHA_INPUT to get leading zero
Regards,
anirban

How to add leading zeros to hex string?

Hi, I've got the following problem:
I have a string that represents a 8-digits hexadecimal number. But if the number has less as 8 digits, I need to add the leading zeros. I can't use DecimalFormat, 'cause it works only with decimal numbers. Is there any elegant solution to add the leading zeros to hex string (for example "A3F" to "00000A3F")

Or better use a StringBuffer for that, though I doubt it's a performance problem in your case.

How to delete leading zeros for amount fields

Hi all,
I have problem with the leading zeros, where I am populating nearly 30 amount fileds in my statement.i want to delete leading zeros.
I have tried with shift and pack.
and I cannot call every time the function module *alpha_output or input.
can anybody suggest me the better solution.
Regards,
Sre

You could use a syntax like
SHIFT: w10a LEFT DELETING LEADING '0',
       w10b LEFT DELETING LEADING '0',
       w10c LEFT DELETING LEADING '0',
       w10d LEFT DELETING LEADING '0'.
or using macros like
DEFINE delzero.
shift &1 left deleting leading '0'.
END-OF-DEFINITION.
delzero: w10a, w10b, w10c, w10d.
Regards

How to add prefix zero to all matnr fields in itab

Hi,
I ve a internal table with following fields
Matnr                                                  bwkey
6                                                        678
67                                                      rty
678                                                    78k
How to add prefix zero to all tha matnr fields.
like
matnr                                     bwkey
00000000000000006                678
00000000000000067                rty
00000000000000678                78k
Thanks in advance

Hi,
commonly used conversion routine is ALPHA.
It is conversion used to insert leading zero for document number.
For example, in sales order (VBAK-VBELN length 10),
when we key in order no, for example we key in '4302',
conversion routine input will automatically add leading zero,
so it will become '0000004302', this is real value stored in table VBAK.
On conversion routine output, it will delete leading zero
function CONVERSION_EXIT_ALPHA_INPUT, this will add leading zeros to a character based field of any length.
Ex:
data: lv_c(10) type c value '123'.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
          exporting
                  input = lv_c
          importing
                 output = lv_c.
write:/ lv_c.
Regards.

How can i avoid leading zeros for a field in smartform?

how can i avoid leading zeros for a field in smartform?

Hi,
Using the Symbols.
&symbol(Z)& Omit Leading Zeros &symbol(S)& Omit Leading Sign
&symbol(<)& Display Leading Sign to the Left
&symbol(>)& Display Leading Sign to the Right
&symbol(C)& Compress Spaces
&symbol(.N)& Display upto N decimal places
&symbol(T)& Omit thousands separator
&symbol(R)& Right justified
&symbol(I)& Suppress output of the initial value
Regards,
Shiva Kumar

How to maintian leading zeros in BI ?

Hi All,
We have a requirement for one InfoObject called "0RPA_MEAN" EAN Assignment to Article for this info object i need to maintain a leading zeros as its coming from R/3 end?
Ex: In R/3 side EAN 123 is different than EAN 0123,EAN 00123.
But while extracting in BW end the the leading zeros is getting skipped off?How to retain the leading zeros?
In rsa3 its coming with the same leading zeros but in psa its not showing it?
This is very serious issue going on, need your valuable inputs on this?
Many thanks in advance.
*Points Assured*

Hi Rakesh,
When you extract data to BI there won't be any leading zeroes. So in PSA there won't be any leading zeroes.
To bring leading zeroes from PSA itself.
Double click on your datasource in rsa1. Click on the 'Fields' tab. Type 'ALPHA' for the source system field under the column 'Conv. Routines'. I think that will solve the problem.
To bring leading zeroes after PSA (ie. from transformation onwards)
But when load data from PSA to further data targets using transformation we can add leading zeroes.
So in transformation click on rule details for that info object. In the rule details you have to use a function module called 'CONVERSION_EXIT_ALPHA_INPUT'. when you use this function module the leading zeroes will be added automatically.
Thanking you,
Jerry
Edited by: jerryabap on Oct 14, 2010 5:52 AM

How to add leading zeros to kunnr field

Similar Messages

Maybe you are looking for