How to add link in full screen email Lion?

Hi all
I've been using the full-screen versions of most apps since istalling Lion. Not perfect but I like being able to swipe between screens. However the email function in full screen doesn't allow you to add a link to your message. When you hit compose new message the toolbar functions don't drop down. Am I missing something here?
thanks
WG
Ps - I also have had the Wifi problem which was resolved by setting up network again. Time Machine does seem to take longer to backup with Lion. Finally, also have problems with email where it can't send emails sometimes. None of these dealbreakers for me but hopefully new release version will deal with them!

You should have a limited toolbar, but the add link button isn't part of it.
You can add a link using the Edit menu (or cmd-k), or select text and right-click (Link>Add Link…)

Similar Messages

  • How to hide link and full screen view in Safari?

    Hi All,
    I am demonstrating a product on the web i want to hide the link and have a full screen view in safari.
    Thanks

    “hide the link” meaning “hide the address bar”.

  • How to add conversion rule in SCOT email attachment.

    Hello All,
    How to add conversion rule in SCOT email attachment.
    I try to csv conversion rule in scot through spro. I add this rule through SPRO successfully but this rule not added in SCOT internet tab.

    Hi,
    Please find below link. May be these are helpful to you.
    http://scn.sap.com/thread/717106
    http://help.sap.com/saphelp_nw70/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/39/4d3d3d9ba00645e10000000a114084/content.htm
    Regards,
    Saket S. Ghanekar

  • How can I create a full-screen view of Keynote slide in Snow Leopard?

    How can I create a full-screen view of my Keynote slides in Snow Leopard?
    I'm going to be importing into ScreenFlow to create a video.
    Thank you!!

    Welcome to Apple Support Communities.
    Do you want static screen captures or motion video of slides as titles, bullet points, and the like are presented?
    Run the Keynote slide presentation in full-screen mode, then...
    Static full-screen captures - use Command+Shift+3.
    Static partial-screen captures - use Command+Shift+4 and use cursor to select the area of the screen to capture.
    If you want motion video as builds occur, why not use Keynote's built-in Share, Export function?
    (I'm on iLife '09.)
    Also understand that the default slide format for Keynote is 1024x768, not full-screen MacBook 1280x800 screen size, so you'll have wide black borders unless you change the default size or crop the finished screen captures.
    Message was edited by: kostby

  • How can I exit from full-screen View?

    On the View menu, I clicked "Full screen View", but then I couldn't find any way back to normal view. I had to Force-Quit Firefox to escape.
    How do you exit from Full Screen View?
    (I tried Esc, Ctrl-C, and many other key combinations)
    Thanks, PeterR

    Try F11.

  • How to get out of full screen mode in Firefox 4?

    How to get out of "Full Screen Mode" in firefox 4 ?

    Pressing the F11 should do it.

  • How to display contact person full screen photo in making a call or receive call

    How to display contact person full screen photo in making a call or receive call

    Apple have removed the full screen contact image calling in 7.1, they come with default icon. Hope they bring back that option in next, you can also leave feedback @http://www.apple.com/feedback/

  • 1. How to view my work full screen? 2. How to make "F" keys behave proper?

    Hello All,
    Two softball questions for FCP batting practice:
    1. Somewhere along the way, I came across an explanation on how to make my canvas full screen. I found a post mentioning View, External Video, and something about cinema (not in front of it right now). I don't have an external monitor, so how can I accomlish this on my laptop?
    2. Speaking of laptops, many of the "F" keys don't work as described in the manual. For example, F12 brings up a dashboard with weather in Cupertino, CA. Not exaclty conducive to my workflow. Is there a place to tell the MacBook Pro that when operating this application, default to the "F" commands within the software?
    Thanks All.
    DG

    Hey Steve,
    Point well taken. In the past week, I purchased a camera, Final Cut, MacPro, Mic, Lights, Tripod, etc. I have purchased two books that were recommended on this site (both excellent), and a CD tutorial. I have been out shooting every day, doing tutorials and editing (to the best of my ability) every night. All of that being said, it's a tremendous amount of information, and some of the finer points get lost. I am pleased to say that I have completed my first piece on hunger experienced by seniors in our community. Very gratifying.
    So, I fully appreciate the apparent laziness inferred from my post, but trust me, I'm fully engaged, just overwhelmed.
    Shane, thanks for "pinch hitting". Both solutions worked.
    DG

  • How to show dock in full screen mode

    Hello,
    I'm wondering how to get the dock to show up temporarily in full screen mode. When I place my cursor near the bottom of the screen in a full screen app, the dock doesn't pop up. Is this normal and if so, how do I switch between full screen apps without using gestures on the mouse? I'm really hoping that this is a bug.
    Thanks

    Alternatively you can use the same principle anywhere on the screen, you do not have to scroll to the bottom.  Simply move the cursor to the screen edge where your dock is then move the cursor the same direction again. You do have to briefly pause between the two movements but you can do this anywhere the dock is located, it does not have to be at one position on the screen.  That should speed things up a bit and prevents the dock from appearing by inadvertently scrolling to the side or the bottom.
    If you can, get a Magic Trackpad, Lion navigation works very well with one of these, I think that the days of the mouse are numbered.  The numbers of gestures available with the Magic Trackpad is extensive in Lion.

  • How can I get a full screen on facetime

    How can I get a full screen on FaceTime

    You woul dprobably need to choose a zoom display mode on the TV.
    Any screem shots / promos for mirroring I've seen have been 4:3 ratio like the iPad screen resolution.
    To me this would be an obvious source of frustration to users of 16:9 TVs - unless there's an ipad 2 mode to somehow run in 16:9 not using the whole screen or not displaying the edges for mirroring, AppleTV2 may not be able to fill the screen

  • How can I get a full screen on my tv when i am mirroring from my ipad 2

    how can I get a full screen on my tv when I am mirroring from my ipad 2?

    You woul dprobably need to choose a zoom display mode on the TV.
    Any screem shots / promos for mirroring I've seen have been 4:3 ratio like the iPad screen resolution.
    To me this would be an obvious source of frustration to users of 16:9 TVs - unless there's an ipad 2 mode to somehow run in 16:9 not using the whole screen or not displaying the edges for mirroring, AppleTV2 may not be able to fill the screen

  • How do I run two full screen applications on separate screens?

    I have two screens for my MacBook Pro with Lion; the laptop screen and a stock screen hooked up by a VGA cable. Currently, when I use a full screen application, my second screen just changes to the grey fabric pattern. How do I run a full-screen application on each screen?

    Hi Jared,
    Connect/turn on the external monitor. Open System Preferences on your MBP > Displays. There should be two windows, one for the external monitor and one for the MBP. Click on the window for the external monitor. Click on the Arrangement tab. Uncheck the box for Mirror Displays. This willallow you to set each display to its own resolution. On the external display, click on the pref window for the external monitor display setting. Click on Display. Set the resolution to what you want. On the MBP's display, click on the pref window for the MBP's display and set the resolution to whatever you want. You'll be in what's called "extended desktop mode." You'll have to move the "pointer" all the way to the edge of one display to get it to go onto the other display. Open whatever you want, and drag it to the extended monitor. Set it to full screen. Open another whatever on the MBP's display and set it to full screen. You should be full screen on both displays.

  • IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

    I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
    How can a see the full screen when watching youtube. Address bar is always in view.
    Maps are foggy and some images overlap to eachother.
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis

    Luis757 wrote:
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis
    No, there is no legitimate way to downgrade iOS to an earlier version.
    Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
    You can leave feedback here: Apple Feedback.

  • Small person's picture while calling. How can I make it full screen?

    Small person's picture while calling. How can I make it full screen?

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • How to add linked button in grid?

    Hi,
    Does anyone know how to add linked button in a grid? I can't find it but i saw someone ask similar question but seems none of them works.
    Thanks a lot!
    P.S. For some reason, i can't use matrix because the data is from a SQL query.
    Lan

    Hi,
    as far as I know it is not possible, since this adjustment is made for the whole column. I have created a grid and I open the shown document by double clicking the row header. In the grid I can see if it is sales or purchase and so I use a workaround by opening the specific system form (e.g. sales invoice) in find mode and search the document by document number (also shown in the grid).
    Sample:
    oSBOapp.ActivateMenuItem("2053"); //sales invoice
    oForm = oSBOapp.Forms.ActiveForm;
    oForm.Mode = SAPbouiCOM.BoFormMode.fm_FIND_MODE;
    oEdit = (SAPbouiCOM.EditText)oForm.Items.Item("8").Specific;
    oEdit.Value = Convert.ToString(dNum);
    oForm.Items.Item("1").Click(SAPbouiCOM.BoCellClickType.ct_Regular);
    By the click event, you get the specific row number. Hope it helps...
    Regards
    Sebastian

Maybe you are looking for