How to add List Box in Dialog Screen
Hi All,
I need to add list box in Dialog screen.
In Dialog screen I have 2 radio buttons "Yes" and 'NO'.
If user selects radio button YES, then under Yes I need to display values in list box and these values should be retrieved from one table.
If user selects Radio button NO then under NO I need to display values in list box.
Please give the solution for above requirement.
Thanks
Vijay
Vijay Reddy ,
To get Drop Drown Box on screen .
Follow these steps.
1.Go to T.Code SE51 and Select Laypout for the Screen.
2.Double click on the field for which u want Dropdown box.
3.Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.Save and Activate ur screen .
5.Enter the following piece of code in the PBO of the screen.(Change for ur
requirement).
The following logic needs to be written under PBO of the screen logic.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
land1 TYPE t005t-land1,
natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
FROM t005t
INTO TABLE i_t005t
WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
w_natio-key = i_t005t-land1.
w_natio-text = i_t005t-natio.
APPEND w_natio TO i_natio.
CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
values = i_natio
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
6.Observe the above code and change as for ur requirement.
I hope that it helps you .
Regards,
Venkat.O
Similar Messages
-
How to create list box in selection screen
Hi Experts,
I want to create 2 list boxes, each one is having 5 fields. suggest me the logic.
Thanks.
TonyHi,
Below is the link to help you.
[List Box in Selection Screen;
Or here is the sample code.
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
PARAMETERS: ps_parm(10) AS LISTBOX VISIBLE LENGTH 10.
AT SELECTION-SCREEN OUTPUT.
name = 'PS_PARM'.
value-key = 'scooby1'. APPEND value TO list.
value-key = 'tweety2'. APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
Hope it will help you. Please revert back in case of any query.
Regards
Natasha Garg
Edited by: Natasha Garg on Jan 8, 2009 6:28 AM -
HOw to add list box using enhacement of standard infotype
Hi,
Using enahancement infotype, I wanted to add a list box field in inftyp 01.
The module pool ZP000100 & screen no 200 already existed .In the layout editor the field didnot get displayed hence I took it from dictionary.
I have adde the code in pbo & pai for adding values in list box.
problem is that data is not getting saved when i enter data in pa30 inftyp 01.
Kindly guide me.
Regards,
Rachel*
-
How to add list of multiple file types to file type of file dialog box in LabVIEW
How to add list of multiple file types to file type of file dialog box in LabVIEW?
In file dialog box there is option to add only one file type,in the list,not by seperating commas,
regards,
Naresh.NWrite the file types in pattern Input string, separated by a semicolon ;
For example: *.vi;*.doc;*.jpeg;*.xls
This should return the set of files with matching extensions
Message Edited by devchander on 09-10-2008 08:02 AM
Message Edited by devchander on 09-10-2008 08:03 AM -
How can we use list box on selection screen
hi, howe can we use list box on selection screen and how can we populate the dat ainto the list box and how can we retrive data based on list box from ther database.
thanks in advance
rajuUse the VRM_SET_VALUES function module.
DATA: list TYPE vrm_values,
value LIKE LINE OF list.
AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
name = 'P_OBJECT'.
CLEAR list.
REFRESH list.
CLEAR value.
value-key = '1'.
value-text = 'Development Class'.
APPEND value TO list.
CLEAR value.
value-key = '2'.
value-text = 'Program'.
APPEND value TO list.
CLEAR value.
value-key = '3'.
value-text = 'Function Module'.
APPEND value TO list.
CLEAR value.
value-key = '4'.
value-text = 'Database Table'.
APPEND value TO list.
CLEAR value.
value-key = '5'.
value-text = 'Structure'.
APPEND value TO list.
CLEAR value.
value-key = '6'.
value-text = 'View'.
APPEND value TO list.
CLEAR value.
value-key = '7'.
value-text = 'Data Element'.
APPEND value TO list.
CLEAR value.
value-key = '8'.
value-text = 'Table Type'.
APPEND value TO list.
CLEAR value.
value-key = '9'.
value-text = 'Class / Interface'.
APPEND value TO list.
CLEAR value.
value-key = '10'.
value-text = 'Type Group'.
APPEND value TO list.
CLEAR value.
value-key = '11'.
value-text = 'Domain'.
APPEND value TO list.
CLEAR value.
value-key = '12'.
value-text = 'Search Help'.
APPEND value TO list.
CLEAR value.
value-key = '13'.
value-text = 'Lock Object'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
How to populate list box in module pool program
How to populate list box in module pool program.
Please give me reply as soon as posible
regards,
Venu.hi,
go thrugh the folling code .
TABLES sdyn_conn.
DATA ok_code TYPE sy-ucomm.
Global data
TYPES: BEGIN OF type_carrid,
carrid type spfli-carrid,
carrname type scarr-carrname,
END OF type_carrid.
DATA itab_carrid TYPE STANDARD TABLE OF type_carrid.
*& Processing Blocks called by the Runtime Environment *
Event Block START-OF-SELECTION
START-OF-SELECTION.
CALL SCREEN 100.
Dialog Module PBO
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
Dialog Modules PAI
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'SELECTED'.
MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
Dialog Module POV
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
FROM scarr
INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'CARRID'
value_org = 'S'
TABLES
value_tab = itab_carrid
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
the following code should be included in flow logic of screen
process on value-request.
field scarr-carrname module create_dropdown_box.
in module pool select list box.
hope it is useful.
regards,
sreelakshmi. -
How to Add Push Button On Selection Screen
Hi Experts,
How to add Push button on Selection Screen.
Points will b rewarded for useful help.
Bohra.Hi,
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREENevent.
Ex.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CLI1'.
FLAG = '1'.
WHEN 'CLI2'.
FLAG = '2'.
WHEN 'CLI3'.
FLAG = '3'.
WHEN 'CLI4'.
FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a
dialog box. The selection screen is defined in a statement chain for keyword
SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4',
the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
Regards,
Bhaskar -
How to apply List box for multiple selection of rows in ALV report ?
Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subashhi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container,
gt_fieldcat TYPE lvc_t_fcat,
gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE. "pbo OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
ENDMODULE. "pai INPUT
*& Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'T517A'
CHANGING
ct_fieldcat = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
WHEN 'SLART'.
*is the first list box
ls_fcat-drdn_hndl = '1'.
ls_fcat-outputlen = 15.
MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
ls_fcat-drdn_hndl = '2'.
ls_fcat-outputlen = 15.
MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM. "build_fieldcat
*& Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
EXPORTING
is_layout = gs_layout
CHANGING
it_fieldcatalog = gt_fieldcat
it_outtab = gt_outtab.ENDFORM. "ALV_OUTPUT
*& Form dropdown_table
text
--> p1 text
<-- p2 text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
EXPORTING
it_drop_down = lt_dropdown.ENDFORM. " dropdown_table
*& Form build_layout
text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM. " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM -
How to add check box in SAP B1 grid controls..
hi all,
Anyone know how to add check box in SAP grid control?
It will be great if you could show me some sample code.
thanks.
regards,
sohchHi Sohch,
1. First of all you should define the Column in a matrix as it_CHECK_BOX. Like
oColumns = oMatrix.Columns
oColumn = oColumns.Add("chk_YesNo", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
oColumn.TitleObject.Caption = "YesNo"
oColumn.Width = 60
oColumn.Editable = True
2. Bind it with a DBDataSource as defined
oColumn = oColumns.Item("chk_YesNo")
oColumn.DataBind.Bind("UDTable", "U_YesNo")
3. Make Sure that the value that is being put into the Database is either 'Y' or 'N'.
Hope this Helps
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan -
How to Add F4 Help To a Screen Field In a Module Pool Program
Hi Friends,
1. How to Add F4 Help To a Screen Field In a Module Pool Program?
2. How to select a single cell in ALV report output for interactive reporting ?
Kindly give code example.
regards,
PradeepHi,
Try using the fm 'F4IF_INT_TABLE_VALUE_REQUEST'.
Refer the link below for selecting single cell.
alv
Reward points if useful.
Regards
Rose -
How to use list box parameter in crystal Reports
Hi Experts,
How to acheive list box parameter in sap B1 crystal reports.
Regards
VinothHi,
check this thread
Crystal Report Drop Down Selection List
Drop down list parameter
https://scn.sap.com/thread/1782598 -
How can I add new value in a list box in a screen
Hi All ,
In transaction CRMD_BUS2000120 (CRM Server), I need to add one value to the list box. Already 4 values are coming. How can I add 1 more value.
any suggestion is very appreciated.
Thanks & Regards,
Shekar.Hi,
Check you have any exits to do that, if there are no exits then you can Copy the program and change the code.
to add the extra value in list box, you just have to append the new line to the internal table which you are passing to VRM_SET_VALUES FM.
some thing like this..
wa_list-key = sy-tabix.
wa_list-text = itab1-vbeln.
Append wa_list to It_list.
v_name = 'P_VBELN'.
call function 'VRM_SET_VALUES'
exporting
id = v_name
values = It_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regads
vijay -
Handle text using list box in dialog program
hi,
I am working on dialog program , Created two fileds , one is list box type I/O field and another is i/O field which displays text based on value selected in list box.
Please provide any inf how to Handle text using list box value in dialog program.
thanksHi,
<li>Check the screen to know how to set I/O field to set as listbox.[ dropdown box picture|http://2.bp.blogspot.com/_O5f8iAlgdNQ/Sm7RBrqfjcI/AAAAAAAAFaU/RateViiVqrU/s1600-h/drop_down-754481.JPG]
<li>in the above screen we need to set FctCode for the dropdown box field so that when you select value from the dropdown box PAI event is triggered.
<li>screen flow logic like below
PROCESS BEFORE OUTPUT.
MODULE values_into_dropdown.
FIELD g_bukrs.
FIELD g_text.
PROCESS AFTER INPUT.
FIELD g_bukrs.
FIELD g_text MODULE get_bukrs_txt.
<li>Logic to fill Dropdown field with values.
PROGRAM sapmztest_dropdown.
DATA: g_bukrs TYPE t001-bukrs.
*& Module VALUES_INTO_DROPDOWN OUTPUT
MODULE values_into_dropdown OUTPUT.
TYPE-POOLS:vrm.
DATA:
field TYPE vrm_id,
it_values TYPE vrm_values,
wa_values LIKE LINE OF it_values.
DATA: t001 TYPE t001 OCCURS 0 WITH HEADER LINE.
IF it_values[] Is INITIAL.
SELECT * FROM t001 INTO TABLE t001 UP TO 10 ROWS.
LOOP AT t001.
wa_values-key = t001-bukrs.
wa_values-text = t001-butxt.
APPEND wa_values TO it_values.
CLEAR wa_values.
ENDLOOP.
ENDIF.
field = 'G_BUKRS'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = FIELD
values = it_values.
ENDMODULE. " VALUES_INTO_DROPDOWN OUTPUT
*& Module get_bukrs_txt INPUT
MODULE get_bukrs_txt INPUT.
read table it_t100 into wa_t100 with key bukrs = g_bukrs.
g_text = t001-butxt.
ENDMODULE. " VALUES_INTO_DROPDOWN INPUT
I hope that it helps you.
Thanks
Venkat.O -
Add List box for one field in ALV GRID
Hi All,
I need to add drop down list box for one field in ALV Grid.
If any body knows, please help.
Thanks in advance.
Regards
MangleshHi,
Here is the ex where i have used for date parameter in the sel screen
type-pools: vrm.
data: name type vrm_id,
list type vrm_values,
value like line of list.
parameters : p_date like p_date2
as listbox visible length 15.
at selection-screen output.
name = 'P_DATE'.
value-key = '1'.
value-text = 'Today'.
append value to list.
value-key = '2'.
value-text = 'Last 7 days'.
append value to list.
value-key = '3'.
value-text = 'Last 30 days'.
append value to list.
value-key = '4'.
value-text = 'Last 90 days'.
append value to list.
value-key = '5'.
value-text = 'Last year'.
append value to list.
Call the ''VRM_SET_VALUES' to display the values in Listbox
call function 'VRM_SET_VALUES'
exporting
id = name
values = list.
at selection-screen.
if sy-ucomm = 'CLI1'.
sscrfields-ucomm = 'ONLI'(001).
endif.
if p_date = '1'.
p_date11 = sy-datum .
elseif p_date = '2'.
p_date11 = ( sy-datum - 7 ).
elseif p_date = '3'.
p_date11 = ( sy-datum - 30 ).
elseif p_date = '4'.
p_date11 = ( sy-datum - 90 ).
elseif p_date = '5'.
p_date11 = ( sy-datum - 365 ).
endif.
Hope this helps u..
Please reward points if useful.
Regards,
Sreenivas -
How to add check box in table control?
Dear frnds,
In our requirement i am used tablec ontrol for dialog programming, but i am confused about addition of check box as fields in table control.
Any help are welcome from your side.Hi,
Chk this demo program: DEMO_DYNPRO_TABCONT_LOOP_AT
& RSDEMO02.
Another way:
Go to the edit mode of the screen select the table control column you want to make it as check box and follow the menu EDIT->CONVERT->check box.
(make sure that column definition in itab/ddtab is of size 1 char)
Also chek out this link:
Add Check box in Table control
Hope these help you.
Regards,
Anjali
Maybe you are looking for
-
My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW
-
20in Cinema Display Box? where can i get one?
Hey eveyone, I just purchased a second hand 20' ACD but it did not come with a box. I am going to be moving at least twice in the next few months, (graduate from school, then off to whatever is next) I found someone selling one on ebay for $30 but th
-
Unable to set Canadian French CSA layout for external keyboard when language set to English
I use both French and English on my iPad. I now have an external keyboard, with French Canadian CSA layout. However, the Canadian French CSA layout for the hardware (external) keyboard is not available when using English as an input language. Many ot
-
Shuffle problem? Help!
My shuffle seems to no longer work. It was working fine but now it plays the first song over and over and doesn't change. I've checked the settings and it's set to random shuffle. Any ideas what is wrong and how I can fix it? Thanks
-
Mac stuck after start, grey display
after a safari session my mac hung up and does not start again. after the start there is the grey display with the apple sign - so far so good. after that, when usually the display changes to the desktop background the display is bright grey and noth