HOw to add list box using enhacement of standard infotype

Hi,
Using enahancement infotype, I wanted to add a list box field in inftyp 01.
The module pool ZP000100 & screen no 200 already existed .In the layout editor the field didnot get displayed hence I took it from dictionary.
I have adde the code in pbo & pai for adding values in list box.
problem is that data is not getting saved when i enter data in pa30 inftyp 01.
Kindly guide me.
Regards,
Rachel

Similar Messages

How to add List Box in Dialog Screen

Hi All,
I need to add list box in Dialog screen.
In Dialog screen I have 2 radio buttons "Yes" and 'NO'.
If user selects radio button YES, then under Yes I need to display values in list box and these values should be retrieved from one table.
If user selects Radio button NO then under NO I need to display values in list box.
Please give the solution for above requirement.
Thanks
Vijay

Vijay Reddy ,
To get Drop Drown Box on screen .
Follow these steps.
1.Go to T.Code SE51 and Select Laypout for the Screen.
2.Double click on the field for which u want Dropdown box.
3.Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.Save and Activate ur screen .
5.Enter the following piece of code in the PBO of the screen.(Change for ur
   requirement).
The following logic needs to be written under PBO of the screen logic.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                       id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
6.Observe the above code and change as for ur requirement.
I hope that it helps you .
Regards,
Venkat.O

How to add list of multiple file types to file type of file dialog box in LabVIEW

How to add list of multiple file types to file type of file dialog box in LabVIEW?
In file dialog box there is option to add only one file type,in the list,not by seperating commas,
regards,
Naresh.N

Write the file types in pattern Input string, separated by a semicolon ;
For example: *.vi;*.doc;*.jpeg;*.xls
This should return the set of files with matching extensions
Message Edited by devchander on 09-10-2008 08:02 AM
Message Edited by devchander on 09-10-2008 08:03 AM

How to populate list box in module pool program

How to populate list box in module pool program.
Please give me reply as soon as posible
regards,
Venu.

hi,
go thrugh the folling code .
TABLES sdyn_conn.
DATA   ok_code TYPE sy-ucomm.
Global data
TYPES: BEGIN OF type_carrid,
         carrid type spfli-carrid,
         carrname type scarr-carrname,
       END OF type_carrid.
DATA itab_carrid TYPE STANDARD TABLE OF type_carrid.
*& Processing Blocks called by the Runtime Environment                 *
Event Block START-OF-SELECTION
START-OF-SELECTION.
CALL SCREEN 100.
Dialog Module PBO
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
Dialog Modules PAI
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
Dialog Module POV
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
the following code should be included in flow logic of screen
process on value-request.
field scarr-carrname module create_dropdown_box.
in module pool select list box.
hope it is useful.
regards,
sreelakshmi.

How to create list entries using ADM ?

Hi All,
I want to create list box using ADM.
Thanks

Thanks for the reply.
Sorry for the simple question.
What is the theme used in Adobe Illustrator CS6?
And then I started programming in Flash Builder 4.6 and the panel is obtained with the other buttons.
Or how to move the theme Adobe Illustrator CS6 in my project?
Thanks

Add list item using anonymous user in public website of shareopint 2013 office 365

Can any body know the solution to over come of following error while add list item using anonymous user using CSOM in shareopint 2013 office 365 public website.
I have tried following solution to narrow down the error from "Access permission"
http://sharepointtaproom.com/2014/08/28/anonymous-api-access-for-office-365-public-sites/#comment-2304

Try below:
http://www.codeproject.com/Articles/785099/Publish-a-Form-for-Anonymous-Users-on-a-Public-Sit
http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/how-to-allow-anonymous-users-to-add-items-to-sharepoint-list-using-client-object-model.aspx
// Allows AddItem operation using anonymous access
private
static voidAllowAnonAccess(){
Console.WriteLine("Enabling Anonymous access....");
SPWebApplication webApp =
SPWebApplication.Lookup(new
Uri(webAppUrl));
            webApp.ClientCallableSettings.AnonymousRestrictedTypes.Remove(typeof(Microsoft.SharePoint.SPList),
"GetItems");
            webApp.ClientCallableSettings.AnonymousRestrictedTypes.Remove(typeof(Microsoft.SharePoint.SPList),
"AddItem");
            webApp.Update();
Console.WriteLine("Enabled Anonymous access!");
// Revokes Add/Get Item operation using anonymous access
private static
voidRemoveAnonAccess(){
Console.WriteLine("Disabling Anonymous access....");
SPWebApplication webApp =
SPWebApplication.Lookup(new
Uri(webAppUrl));
            webApp.ClientCallableSettings.AnonymousRestrictedTypes.Add(typeof(Microsoft.SharePoint.SPList),
"GetItems");
            webApp.ClientCallableSettings.AnonymousRestrictedTypes.Add(typeof(Microsoft.SharePoint.SPList),
"AddItem");
            webApp.Update();
Console.WriteLine("Disabled Anonymous access!");
http://www.fiechter.eu/Blog/Post/12/Create-a-survey-for-anonymous-users-on-Office-365
If this helped you resolve your issue, please mark it Answered

How to add check box in SAP B1 grid controls..

hi all,
Anyone know how to add check box in SAP grid control?
It will be great if you could show me some sample code.
thanks.
regards,
sohch

Hi Sohch,
1. First of all you should define the Column in a matrix as it_CHECK_BOX. Like
        oColumns = oMatrix.Columns
        oColumn = oColumns.Add("chk_YesNo", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
        oColumn.TitleObject.Caption = "YesNo"
        oColumn.Width = 60
        oColumn.Editable = True
2. Bind it with a DBDataSource as defined
        oColumn = oColumns.Item("chk_YesNo")
        oColumn.DataBind.Bind("UDTable", "U_YesNo")
3. Make Sure that the value that is being put into the Database is either 'Y' or 'N'.
Hope this Helps
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan

How to add classification view using BAPI_MATERIAL_SAVEDATA

Hi,
Please any one let me know how to add classification view using BAPI_MATERIAL_SAVEDATA to the material master.
Thanks,
shekar

We use this bapi on a regular basis as well as classification of materials. We have success doing this in 2 steps. First step is to save the material using BAPI_MATERIAL_SAVEDATA, second step is to save classification using BAPI_OBJCL_CHANGE (this can be used for both create and change) Also look at Function Group CLBPA . there are several bapi's in that group dealing with object classification, including the one I mentioned..

How to apply List box for multiple selection of rows in ALV report ?

Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subash

hi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
   WHEN 'SLART'.
*is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

How to Add IBAN Field in the Bank Details Infotype?

Hello All,
I need to know the procedure for How to add IBAN field in the bank details infotype?
Could anyone help me please.
I m new to SAP HR.
Immediate help will be appreciated.
Thanks.
Regards,
Mudassir.Imtiaz

Hi mudassir,
For IBAN implementation:
1. Implement SAP Notes 925410, 1409674, 1405521
2. Go to t-code FIBF - From menu select Settings - P/S Modules - of an SAP Application - Create entry
For Turkey we've added the following entry (depends on country) :
00003040 TR CONVERT_IBAN_2_BANK_ACCOUNT_TR
3. Go to V_T588M for module pool MP000900 and screen 2000 select IBAN & Q0009-IBAN00 fields as standard.
4. Go to table T77S0 and make value of ADMIN IBAN entry S.
Regards,
Dilek

Select item in list box using code

We use Adobe Workflow v5. I am creating a Check Request application where users type information into various fields and when they click Add, the data is added to a List Box. Also when they click Add, if the current item is >$1,000, a query searches our accounting database to see if the client has outstanding AR older than 90 days. If they do, another list box is displayed with the client name and amount of outstanding AR.
If that clientnum is already in the second list box, it does not add another one.
To delete a record from the first list box, the users select the item in the first list box, and then click a Delete button. That deletes the
record in the first list box.
I am also trying to delete the record from the second list box but am not sure how to select it using code. As part of the Delete button code, if the currently selected item (the one they want to delete) is >$1,000, I go through each row of the first list box to see if clnum.text (field in the form where the record to be deleted is now displayed) matches the client number in column 4 of any row of the first list box. If it does, I see if the amount of the item in the first list box is >$1000.
If it is, then I know that there is a corresponding record in the second list box.
Here is some of the code:
'go through each row in first list box
For irow = 1 to lstExp.ListCount
'set clientnum variable equal to client # in row in first list box
clientnum = lstExp.RetrieveItem(irow,4)
'if clientnum variable is equal to client # to be deleted from first list box (selected record - client # in clnum.text now)
if clientnum = trim(clnum.text) then
'if amt is >$1,000 in first list box
if lstExp.RetrieveItem(irow,10) > 1000 then
'don't delete row because there is another record in first list box
DeleteOutAR = "N"
else
'delete row because there is NOT another record in first list box.
DeleteOutAR = "Y"
end if
end if
Next
Here is the code I need help with. I am unsure how to select the record in the second list box so I can delete it.
if DeleteOutAR = "Y" then
'go to second list box ?
form.GoToField(lstOutARUnbilled)
'start going through second list box looking for clientnum
For irow2 = 1 to lstOutARUnbilled.ListCount
if clientnum = lstOutARUnbilled.RetrieveItem(irow2,1) then
irow2 = lstOutARUnbilled.CurrentSelection
lstOutARUnbilled.Removeitem (irow2)
end if
next
end if
So my question is, how can I move to the second list box to actually delete the record?
Thank you in advance for any help.
Mary

Mary-
The solution could either be quite easy or difficult dependent upon how the data is arranged in the subsequent list box.
Basically, if there is any sort of corresponding or matching entries, meaning line 1 from list box #1 matches with line 1 of listbox #2, then you would simply execute the following...
"listbox#2.RemoveItem listbox#1.CurrentSelection"
Or if you have a column that would contain the same values, say an index, then you could just loop thru the 2nd listbox searching for that index and once found remove the line...
"listbox#2.RemoveItem nRow"
, where nRow would be the line that you discovered to have the matching index.

Add List box for one field in ALV GRID

Hi All,
I need to add drop down list box for one field in ALV Grid.
If any body knows, please help.
Thanks in advance.
Regards
Manglesh

Hi,
Here is the ex where i have used for date parameter in the sel screen
type-pools: vrm.
data: name type vrm_id,
      list type vrm_values,
      value like line of list.
parameters :    p_date like p_date2
                              as listbox visible length 15.
at selection-screen output.
name = 'P_DATE'.
value-key = '1'.
value-text = 'Today'.
append value to list.
value-key = '2'.
value-text = 'Last 7 days'.
append value to list.
value-key = '3'.
value-text = 'Last 30 days'.
append value to list.
value-key = '4'.
value-text = 'Last 90 days'.
append value to list.
value-key = '5'.
value-text = 'Last year'.
append value to list.
Call the ''VRM_SET_VALUES' to display the values in Listbox
call function 'VRM_SET_VALUES'
    exporting
      id     = name
      values = list.
at selection-screen.
if sy-ucomm = 'CLI1'.
    sscrfields-ucomm = 'ONLI'(001).
endif.
if p_date = '1'.
    p_date11 = sy-datum .
elseif p_date = '2'.
    p_date11 = ( sy-datum - 7 ).
elseif p_date = '3'.
    p_date11 = ( sy-datum - 30 ).
elseif p_date = '4'.
    p_date11 = ( sy-datum - 90 ).
elseif p_date = '5'.
    p_date11 = ( sy-datum - 365 ).
endif.
Hope this helps u..
Please reward points if useful.
Regards,
Sreenivas

How to catch List box value

Hi gurus
I have set list box value through vrm_set_value and in the screen level it's working fine
In the custom program I need to fetch data from table using that selected list box value , but its always coming blank .
please help me how to catch that list box value in the program .
Thanks

This is the code
*************SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS    : P_bukrs TYPE bukrs    OBLIGATORY ,                        " Company Code
                 p_psc    TYPE psc_name OBLIGATORY ,
                 p_monat TYPE MONAT    AS LISTBOX VISIBLE LENGTH 5 OBLIGATORY , " Quarter
                 p_gjahr TYPE gjahr    DEFAULT sy-datum+0(4) OBLIGATORY .                        " Year
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS    : P_KIND      AS CHECKBOX USER-COMMAND abc ,                          " Check Box
                P_prcent(6) TYPE P DECIMALS c_val_three ,                    " Take in kind percentage
                p_prod      TYPE PSA_PRODUCT AS LISTBOX VISIBLE LENGTH 10 .   " Take in kind product
SELECTION-SCREEN END   OF BLOCK b2.
     A T   S E L E C T I O N    S C R E E N                          *
AT SELECTION-SCREEN on BLOCK b1 .
Validate Company Codes.
PERFORM sub_validate_com_code.
Validate PSC
AT SELECTION-SCREEN on VALUE-REQUEST FOR p_psc .
PERFORM sub_validate_psc.
Validate Quarter
PERFORM sub_validate_quarter .
AT SELECTION-SCREEN on BLOCK b2 .
Validate Take in kind percentage
PERFORM sub_validate_percnt .
Validate Take in kind Percentage
PERFORM sub_prod_disp .
form sub_prod_disp .
populated internal table lt_prod_val .
LOOP AT SCREEN.
        CALL FUNCTION 'VRM_SET_VALUES'
          EXPORTING
            id              = 'p_prod'
            values          = lt_prod_val
          EXCEPTIONS
            id_illegal_name = 1
            OTHERS          = 2.
        IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDLOOP.
in start of selection the p_prod is always coming initial .

How to add check box in table control?

Dear frnds,
In our requirement i am used tablec ontrol for dialog programming, but i am confused about addition of check box as fields in table control.
Any help are welcome from your side.

Hi,
Chk this demo program: DEMO_DYNPRO_TABCONT_LOOP_AT
& RSDEMO02.
Another way:
Go to the edit mode of the screen select the table control column you want to make it as check box and follow the menu EDIT->CONVERT->check box.
(make sure that column definition in itab/ddtab is of size 1 char)
Also chek out this link:
Add Check box in Table control
Hope these help you.
Regards,
Anjali

How to add check boxes on plant data /storage tab of MM01/02/03 transaction

Hello experts,
I want to add check boxes on plant data /storage tab of MM01/02/03 transaction.
How can we achieve this?
Thanks for your help in advance!

Hi Shriram Nimbolkar ,
Go to tranx code : MM01 /MM02 / MM03
1 ) System-->Status , here copy the program
2) Go to abap editor ,specify the program name and copy the package
3) Go to CMOD or SMOD
CMOD>Utilites-> SAP Enanchements, Here specify the package and execute it..
4) Displays multiple exists,
check the suitable exists and insert the code in particular screen...
Reg
Siva Prasad

HOw to add list box using enhacement of standard infotype

Similar Messages

Maybe you are looking for