How to add Mac27" to existing home network? and read files on other PC computers (Window7)

How to add Mac27" to existing home network? and read files on other PC computers (Window7).
type of connection:
All computer (PC & Mac) connect to router (ethernet or wireless), then connect to internet.
condition:
internet works fine on all computer (PC & Mac).
existing 4 PC communicate well (share files & printers),
my problem:
can NOT add Mac into existing home network.
I tried SYSTEM PREFERENCES, then NETWORK, then ......... several times
could not make it work.
pleas help.

Ah, it looks like I should have read your title more carefully. Are the files on the PCs that you want to share with your iMac in a shared folder?
If not, follow the steps on this page to set up shares from Windows 7.
If that is already set up, connect to the share from the iMac using this article.

Similar Messages

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

How to setup once an Airport home network and keep it alive?

Hello!
I have the following hardware setup:
1 - A Macmini 2009, Ethernet wired to my router which allows the connection to the internet;
2 - An HP Deskjet printer, USB connected to the Macmini;
3 - My wife's laptop PC, WiFi connected to my Mac.
My Macmini handles the internet connection the traditionnal way (Ethernet and PPoE) and has a static IP on it.
(Why a Static IP? Because I run my own Webserver.)
I set up a WiFi Home Network in order to allow my wife sharing both my Internet Connection and the Printer Connection.
Everything run well: fast and smooth. The PC has Internet and Printer access.
Problem is:
After each restart, I must re-create the Airport home network.
System Preferences-->Airport doesn't memorize the name, parameters and credentials of this network.
How can I fix this?
Many thanks in advance for your replies!
Best regards
Gerry

If your router is wireless, you should probably use the laptop to configure it to take care of the network (i.e. have the router distribute the IP addresses). Then you can connect your computer to it via the LAN port on the router. Otherwise, you would have to set up your computer to "share its Internet connection" (via Preferences/Sharing or Preferences/Network not sure). I don't think you need to create a network for this.

How to combine both DAQ AI signal, write and read file in single VI

Hi
I am the new user of LabVIEW version 7.1 for testing automation application. I have to measure 33 signals ( mostly analog like temp, pressure, etc...) from NI USB 6210 DAQ system and write in master file for future verfication.From real data or from master file back up have to write one more file if only the signal reaches steady state , which will used for analysis and same signals to be read from this file parallely & make a waveform and/or table display format.
Pl. help me to shortout this problem
note: I have plan to ugrade labVIEW version 2011 shortly, so let me know doing parrel acquistion write and read file for data analysis in same VI in version 7.1......

Parallel operations in LabVIEW are very simple. Just code it in parallel and it will work.
Try taking a look at some of the examples in the NI Example Finder (Help > Find Examples). There you will find example for writing to and reading from files, as well as data acquistion in parallel with other operations.
You might need a producer/consumer architecture is you are acquiring data very quickly.
Chris
Certified LabVIEW Architect
Certified TestStand Architect

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Connecting to existing home network via Airport Express

I had my Macbook Pro connected to our home router which allowed me access to our home network and the internet. On this network we had connected both my MBP and my flatmates PC (which is connected directly to the router via network cable).
Through this configuration i was able to both access the internet AND access files on the PC. I have recently purchased and airport express to eliminate the need for the network cord. Since setting up the AE i have been able to connect to the internet no problem by creating a wireless network and using all the automatic settings, however in the process i have lost my ability to connect to the home network and my flatmates computer. In fact, under "networks" in finder the home network has disappeared. Also in network prefences i am getting a warning saying "The cable for Ethernet is not plugged in".
Is anyone able to tell me what im doing wrong?
thanks ....
Message was edited by: seysearles

The problem is that the AirPort Express (AX) is creating a subnet.
To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

Adding new Computer to my Home Network and I have a WRT54GS .V5 Router

I have a existing home network connecting a HP laptop and a Dell desktop and all is well. Now however I bought a new Lenovo laptop with the Vista OS with SP1 and I would like to connect it to my home existing home network. I know this might be a rather simple question BUT I am not great with networks and I set up my home network years ago and I draw a blank on how I did it. There is one CD I found that I marked with the words Remote Linksys Install on it and there is one file on it named NetSetClient. Not sure why I kept it and I do not remember what it does but might help in getting my solution.
Please help the network novice

As your linksys router is configured and its working on 2 other computers perfectly fine, so you dont have to run the CD again on your new computer. Is your new computer is a Wireless computer, So on your New computer, in the system tray, Right click on Two computer Icon and select "Connect to a Network".. selecte your Wireless network... type in your security key and click on Connect. After this try going online.
If you new computer is a Wired computer, Just plug in the cable from your New computer to the Router and you will be able to go Online.

Connect Fios to Cat5e home network AND Coax connections?

My Verizon fios system was recently installed. My home is wired for a Cat5e home network and standard Coax in all rooms. The fios system is currently connected to the Coax connections and the TVs and Fios router all work fine. Problem is that I would also like to use the Cat5e connections for devices that access the internet that don't have wireless capability and are not proximate to the Fios router. Is it possible to connect the ONT to my Cat5e home network so that I can connect other devices directly to the Cat5e outlets, and keep the existing Coax set-up?
I understand that the standard Fios set-up only allows using either an Ethernet output or the Coax output, but not both. Any suggestions?
One option might be to move the router to the basement (where the equipment is located that I want to connect to the Cat5e network), but then the router will likely be too far from the rest of the house to receive the wireless signal. In that case, is it possible to connect a wireless router in another location (I have a Belkin wireless router). Or do I need to get another router from Verizon?

DC_Sox_Fan wrote:
I just spoke to Verizon Fios Tech Support and they claim that it is NOT possible to use both the Coax and Cat5e connections. So, for those that have a Cat5e home network, but still want to use th Coax for TV, Verzon says you are out of luck.
Thats not strickly true but its not bad info either. You cant use both the coax and cat5 at the same time for INTERNET. The coax internet port (moca) is not active at the same time as the ethernet port. However, many systems use the ethernet for internet and coax for TV.
Depending on how your house is set up this can be accomplished many different ways.
I would assume that you have some kind of utility closet were all the ethernet cables converge, where you could place the router so that it can connect to all the rooms. Is this correct? If so, is there also a coax connection in there? Again, if so, you could place the verizon router in the closet, connect the coax to the router for the link to verizon and the TV's and then connect the ethernet to the lan for the rest of the house. This would be the simplest way assuming that you have this type of connection available to you. there are many other ways but it would all depend on what you have available to you and how your house wiring is set up
====================================================================================
Error exists between keyboard and chair.

Home Network and printer sharing with XP and Vista

   I have a home network and printer wired on my PC desktop which runs XP. My Vista laptop has been connected to internet and printer through the home network for past 6 years flawlessly. However, since October my Vista laptop cannot
connect to the network printer, but internet has been working fine.
   I've tried to uninstall/reinstall, update drivers, connect via TCP/IP but printer isn't located by add printer wizard. When I plug printer directly into laptop via USB it works fine. I also have tried another xp desktop in the house
and that cannot locate the printer also.     Help!
Thanks in advance,
Medic

What have you tried so far?
Have you seen this yet...
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html
http://docs.info.apple.com/article.html?artnum=25609

I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

You don't download anything at all. The feature is built into the iPhone 4 already. Your carrier has to support the feature and there might be an extra charge to use it.
You can read about how it works here.
iOS: Understanding Personal Hotspot - Support - Apple

Share iTunes Library on home network and edit from all computers?

I'd like to share my iTunes library on the 3 Macs on my home network and be able to edit the library (add songs, edit titles, add cover art, etc.) from any of the computers. Is there a way to do this? Thanks!

We're attempting to work out the same trick on another thread.
http://discussions.apple.com/message.jspa?messageID=6450437#6450437

We bought a time capsule then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now?

We bought a time capsule, 1TB, then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now? Does APPLE do not provide latest firmware for this item?

How old is that Time Capsule? The fact that it still have firmware 7.3.1 suggests that it's not the latest model. The latest firmware available for my two-year-old model is version 7.5.2. Apple does provide firmware updates. You just have to let the Time Capsule download and install them. Use AirPort Utility to do that.
Regarding your Wi-Fi problem, please explain what you mean by "it does not identify the existing wireless network".
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access.

How to add a record in document library without upload file.

Hi,
how to add a record in document library without upload file?
Is it possible? I want to create a folders in Document Library but inside folders i do not want to upload a file instead of just i want to create a record. I will map my local file path to the records.
Can anyone help me on it?
Thanks & Regards
Poomani Sankaran

Hello Sankaran,
document library is to upload documents, without document you will not be able to add a record or Item to it.
for your requirement you can use a list and enable folders within the list and maintain the local path of the file as an item in list.
http://www.sharepointbriefing.com/spconfig/article.php/3834951/Enable-the-New-Folder-Creation-Option-in-SharePoint-Custom-Lists.htm
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How to add Mac27" to existing home network? and read files on other PC computers (Window7)

Similar Messages

Maybe you are looking for